Bernhard Rappenglück
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bernhard Rappenglück has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Armando Retama
Independent Researcher, Mexico City, Mexico
3 shared publications- Armando Retama
Molina Center for Energy and the Environment
3 shared publications - Irfan Karim
University of Houston, Department of Earth and Atmospheric Science, Houston, TX, USA
3 shared publications Olivia Rivera-Hernández
Dirección de Monitoreo de Calidad del Aire, Secretaría del Medio Ambiente, Ciudad de México, Mexico
3 shared publicationsTanzina Akther
Department of Earth and Atmospheric Sciences, University of Houston, Houston, TX, USA; Institute for Climate and Atmospheric Science, University of Houston, Houston, TX, USA
3 shared publications- Luis Ackermann
Australian Bureau of Meteorology, Melbourne, Victoria, Australia
2 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Characterizing Anthropogenic and Biogenic Sources of CO2 and CH4 in Houston, Texas, USA
This study presents a comprehensive 2022 dataset of continuous in-situ measurements of δCO2 and CH4, δ¹³CO2 and δ¹³CH4 in Houston, Texas, USA complemented by targeted canister sampling to characterize key anthropogenic and biogenic emission sources. It also integrates ground-based in-situ measurements with satellite observations to characterize CO₂ and CH₄ emission hotspots in Houston, Texas.Seasonal background variability reflects distinct biogeochemical processes: CO₂ declines from ~435 ppm in winter to ~410 ppm in summer due to photosynthetic uptake, while CH₄ decreases from ~2.02 to ~1.88 ppm primarily through OH oxidation. Regional contrasts are evident, with lower marine-influenced backgrounds (~410 ppm CO₂, ~1.85 ppm CH₄) compared to continental sectors (>435 ppm CO₂, >2.05 ppm CH₄).Boundary-layer-height (BLH)-corrected enhancements reveal strong seasonal patterns in anthropogenic emissions. ΔCO₂ peaks in winter-fall (up to ~138 ppm hourly; ~20.6 ppm monthly) and drops to ~8.96 ppm in summer, while ΔCH₄ shows maxima in winter-spring (~5.45 ppm hourly; ~0.10 ppm monthly) and a summer minimum (~0.08 ppm). The 2022 mean ΔCH₄/ ΔCO₂ ratio (8.8 ppb/ppm) is ~14% higher than Philadelphia's in-situ winter value and ~35-40% above EDGAR v8.1 and EPA inventories, but broadly consistent with recent satellite-based estimates across U.S. cities.Bivariate ΔCH₄/ ΔCO₂ mapping identifies major hotspots at McCarty, Blue Ridge, and Coastal Plains landfills (>40-60 ppb/ppm), which are underestimated or absent in inventories. Sharp enhancements at the Ship Channel and McCarty landfill align with satellite NO₂ and HCHO peaks, confirming these as multi-source hotspots. The BLH-corrected in-situ approach captures rapid emission events and diurnal variability, providing finer-scale source attribution and plume detection within the satellite sub-pixel domain that are missed by single overpasses.Temporal analysis revealed distinct seasonal variability: δ¹³CO2 was most depleted in winter, reflecting enhanced combustion-related CO2, whereas δ¹³ CO2 showed the most negative values in summer and fall, consistent with intensified microbial methanogenesis under warm, humid conditions. Background δ¹³CO2 ranged from –11.8‰ to –13.2‰ depending on air mass origin, while δ¹³CH4 varied between –47.2‰ and –50.7‰, reflecting marine–continental transitions. Spatially, bivariate plots and isotopic mapping identified strong CH₄ enhancements (>0.5 ppm) and highly depleted δ¹³ CH4 (−50.5‰ to −51‰) over the McCarty landfill, indicating dominant microbial methane generation, further confirmed by canister measurements δ¹³CH4 ≈ −60.3‰. Estimated emissions from the McCarty Landfill, based on our isotopic mass-balance analysis, were ~2,100 kg CH₄ h⁻¹ ±55%, exceeding the EPA GHGRP inventory value (~857 kg CH₄ h⁻¹) and moderately higher than the Carbon Mapper satellite-derived flux but within combined uncertainties (~1,427 kg CH₄ h⁻¹ ±91%). highlighting that bottom-up inventories underestimate methane emissions from large urban landfills such as McCarty. Overall, the isotopic evidence demonstrates that integrating δ¹³C analyses data provides critical insights into source attribution and the relative roles of combustion, industrial, and microbial processes shaping Houston’s CO2 and CH4 emission landscape.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessCharacterizing Anthropogenic and Biogenic Sources of CO2 and CH4 in Houston, Texas, USA
This study presents a comprehensive 2022 dataset of continuous in-situ measurements of δCO2 and CH4, δ¹³CO2 and δ¹³CH4 in Houston, Texas, USA complemented by targeted canister sampling to characterize key anthropogenic and biogenic emission sources. It also integrates ground-based in-situ measurements with satellite observations to characterize CO₂ and CH₄ emission hotspots in Houston, Texas.Seasonal background variability reflects distinct biogeochemical processes: CO₂ declines from ~435 ppm in winter to ~410 ppm in summer due to photosynthetic uptake, while CH₄ decreases from ~2.02 to ~1.88 ppm primarily through OH oxidation. Regional contrasts are evident, with lower marine-influenced backgrounds (~410 ppm CO₂, ~1.85 ppm CH₄) compared to continental sectors (>435 ppm CO₂, >2.05 ppm CH₄).Boundary-layer-height (BLH)-corrected enhancements reveal strong seasonal patterns in anthropogenic emissions. ΔCO₂ peaks in winter-fall (up to ~138 ppm hourly; ~20.6 ppm monthly) and drops to ~8.96 ppm in summer, while ΔCH₄ shows maxima in winter-spring (~5.45 ppm hourly; ~0.10 ppm monthly) and a summer minimum (~0.08 ppm). The 2022 mean ΔCH₄/ ΔCO₂ ratio (8.8 ppb/ppm) is ~14% higher than Philadelphia's in-situ winter value and ~35-40% above EDGAR v8.1 and EPA inventories, but broadly consistent with recent satellite-based estimates across U.S. cities.Bivariate ΔCH₄/ ΔCO₂ mapping identifies major hotspots at McCarty, Blue Ridge, and Coastal Plains landfills (>40-60 ppb/ppm), which are underestimated or absent in inventories. Sharp enhancements at the Ship Channel and McCarty landfill align with satellite NO₂ and HCHO peaks, confirming these as multi-source hotspots. The BLH-corrected in-situ approach captures rapid emission events and diurnal variability, providing finer-scale source attribution and plume detection within the satellite sub-pixel domain that are missed by single overpasses.Temporal analysis revealed distinct seasonal variability: δ¹³CO2 was most depleted in winter, reflecting enhanced combustion-related CO2, whereas δ¹³ CO2 showed the most negative values in summer and fall, consistent with intensified microbial methanogenesis under warm, humid conditions. Background δ¹³CO2 ranged from –11.8‰ to –13.2‰ depending on air mass origin, while δ¹³CH4 varied between –47.2‰ and –50.7‰, reflecting marine–continental transitions. Spatially, bivariate plots and isotopic mapping identified strong CH₄ enhancements (>0.5 ppm) and highly depleted δ¹³ CH4 (−50.5‰ to −51‰) over the McCarty landfill, indicating dominant microbial methane generation, further confirmed by canister measurements δ¹³CH4 ≈ −60.3‰. Estimated emissions from the McCarty Landfill, based on our isotopic mass-balance analysis, were ~2,100 kg CH₄ h⁻¹ ±55%, exceeding the EPA GHGRP inventory value (~857 kg CH₄ h⁻¹) and moderately higher than the Carbon Mapper satellite-derived flux but within combined uncertainties (~1,427 kg CH₄ h⁻¹ ±91%). highlighting that bottom-up inventories underestimate methane emissions from large urban landfills such as McCarty. Overall, the isotopic evidence demonstrates that integrating δ¹³C analyses data provides critical insights into source attribution and the relative roles of combustion, industrial, and microbial processes shaping Houston’s CO2 and CH4 emission landscape.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Investigation of phthalate emissions from incense stick, scented candle and perfume through a chamber experiment
Phthalate exposure has been rampant with the growing use of these compounds in personal care and other plastic products. Phthalates have been associated with endocrine, neurological, and reproductive disorders resulting from their continuous release from plastic surfaces throughout their lifecycle. These endocrine disruptors are used in personal care products to increase their shelf life. This paper aims to identify phthalates and their concentration in three test materials, perfume, scented candles, and incense sticks, through a chamber experiment. This experiment aids in understanding phthalate emissions into air during the use of these materials in indoor environments. Sampling was performed using Tenax TA tubes, which were placed inside the glass chambers for 30 minutes while maintaining a positive flow rate using a mass flow controller and pump. The tubes capture gas-phase phthalates efficiently. The tubes were then further analyzed using TD-30 and GC/MS. Three phthalates, which were detected in the test materials, were dimethyl phthalate (DEP), dibutyl phthalate (DBP), and butyl benzyl phthalate (BBP). The phthalate concentration was found to be high in incense sticks, with DEP being the most prominent phthalate, followed by DBP. Scented candles had the high concentration of DBP, followed by BBP. A similar pattern was observed in perfumes. The high concentrations of these compounds detected in the test materials underscore growing concerns about the widespread use of phthalates in manufacturing of plastic products.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessInvestigation of phthalate emissions from incense stick, scented candle and perfume through a chamber experiment
Phthalate exposure has been rampant with the growing use of these compounds in personal care and other plastic products. Phthalates have been associated with endocrine, neurological, and reproductive disorders resulting from their continuous release from plastic surfaces throughout their lifecycle. These endocrine disruptors are used in personal care products to increase their shelf life. This paper aims to identify phthalates and their concentration in three test materials, perfume, scented candles, and incense sticks, through a chamber experiment. This experiment aids in understanding phthalate emissions into air during the use of these materials in indoor environments. Sampling was performed using Tenax TA tubes, which were placed inside the glass chambers for 30 minutes while maintaining a positive flow rate using a mass flow controller and pump. The tubes capture gas-phase phthalates efficiently. The tubes were then further analyzed using TD-30 and GC/MS. Three phthalates, which were detected in the test materials, were dimethyl phthalate (DEP), dibutyl phthalate (DBP), and butyl benzyl phthalate (BBP). The phthalate concentration was found to be high in incense sticks, with DEP being the most prominent phthalate, followed by DBP. Scented candles had the high concentration of DBP, followed by BBP. A similar pattern was observed in perfumes. The high concentrations of these compounds detected in the test materials underscore growing concerns about the widespread use of phthalates in manufacturing of plastic products.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Vegetation Dynamics and Atmospheric Glyoxal in Houston, Texas (2018-2022)
Twenty years of MODIS satellite data (2002-2022), TROPOMI glyoxal observations (2018-2022), and ground-based isoprene measurements were used to examine vegetation greenness (NDVI) and atmospheric glyoxal over Houston, Texas. Biogenically produced glyoxal grew by 51% between 2018 and 2022, despite a 2% per decade decrease in summer vegetation greenness and continued urbanization. Ambient mixing ratios of isoprene, the main biogenic glyoxal precursor, paradoxically dropped by 14% within the same time frame. Temperature (+0.68°C/year), ozone (+28%), and photochemical oxidants all significantly increased over this time, according to analysis of concurrent environmental data. The results indicate that higher temperature-driven isoprene emissions (+35%) and accelerated photochemical oxidation (+10%) overcame the declining vegetation signal, resulting in net increases in atmospheric glyoxal. This suggests that Houston's remaining flora is experiencing temperature-driven changes in biogenic volatile organic compound (VOC) emissions per unit area, even while its greenness has reduced.Keywords: MODIS NDVI; TROPOMI glyoxal; Isoprene emissions; Photochemical oxidation
- 14 March 2026
- Published by Copernicus GmbH
Open AccessVegetation Dynamics and Atmospheric Glyoxal in Houston, Texas (2018-2022)
Twenty years of MODIS satellite data (2002-2022), TROPOMI glyoxal observations (2018-2022), and ground-based isoprene measurements were used to examine vegetation greenness (NDVI) and atmospheric glyoxal over Houston, Texas. Biogenically produced glyoxal grew by 51% between 2018 and 2022, despite a 2% per decade decrease in summer vegetation greenness and continued urbanization. Ambient mixing ratios of isoprene, the main biogenic glyoxal precursor, paradoxically dropped by 14% within the same time frame. Temperature (+0.68°C/year), ozone (+28%), and photochemical oxidants all significantly increased over this time, according to analysis of concurrent environmental data. The results indicate that higher temperature-driven isoprene emissions (+35%) and accelerated photochemical oxidation (+10%) overcame the declining vegetation signal, resulting in net increases in atmospheric glyoxal. This suggests that Houston's remaining flora is experiencing temperature-driven changes in biogenic volatile organic compound (VOC) emissions per unit area, even while its greenness has reduced.Keywords: MODIS NDVI; TROPOMI glyoxal; Isoprene emissions; Photochemical oxidation
- Open Access
- 18 January 2026
- Published by MDPI AG in Atmosphere
- Vol. 17 (1) , 100
Vegetation Dynamics and Atmospheric Glyoxal in Houston, Texas (2018–2022)
Twenty years of MODIS satellite data (2002–2022), TROPOMI glyoxal observations (2018–2022), and ground-based isoprene measurements were used to examine vegetation greenness (NDVI) and atmospheric glyoxal over Houston, Texas. Biogenically produced glyoxal grew by 51% between 2018 and 2022, despite a 2% per decade decrease in summer vegetation greenness and continued urbanization. Ambient mixing ratios of isoprene, the main biogenic glyoxal precursor, paradoxically dropped by 14% within the same time frame. Temperature (+0.68 °C/year), ozone (+28%), and photochemical oxidants all significantly increased over this time, according to analysis of concurrent environmental data. The results indicate that higher temperature-driven isoprene emissions (+35%) and accelerated photochemical oxidation (+10%) overcame the declining vegetation signal, resulting in net increases in atmospheric glyoxal. This suggests that Houston’s remaining flora is experiencing temperature-driven changes in biogenic volatile organic compound (VOC) emissions per unit area, even while its greenness has reduced.
- 18 January 2026
- Published by MDPI AG in Atmosphere
- Vol. 17 (1) , 100
Open AccessVegetation Dynamics and Atmospheric Glyoxal in Houston, Texas (2018–2022)
Twenty years of MODIS satellite data (2002–2022), TROPOMI glyoxal observations (2018–2022), and ground-based isoprene measurements were used to examine vegetation greenness (NDVI) and atmospheric glyoxal over Houston, Texas. Biogenically produced glyoxal grew by 51% between 2018 and 2022, despite a 2% per decade decrease in summer vegetation greenness and continued urbanization. Ambient mixing ratios of isoprene, the main biogenic glyoxal precursor, paradoxically dropped by 14% within the same time frame. Temperature (+0.68 °C/year), ozone (+28%), and photochemical oxidants all significantly increased over this time, according to analysis of concurrent environmental data. The results indicate that higher temperature-driven isoprene emissions (+35%) and accelerated photochemical oxidation (+10%) overcame the declining vegetation signal, resulting in net increases in atmospheric glyoxal. This suggests that Houston’s remaining flora is experiencing temperature-driven changes in biogenic volatile organic compound (VOC) emissions per unit area, even while its greenness has reduced.
- 30 December 2025
- Published by Elsevier in Chemosphere
- Vol. 394, 144813
Box-modelling of HOx in Mexico City
- 30 December 2025
- Published by Elsevier in Chemosphere
- Vol. 394, 144813
Box-modelling of HOx in Mexico City
- 28 November 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 366
Integrating surface-based in-situ and satellite observations to characterize CO2 and CH4 emission hotspots in Houston, USA
- 28 November 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 366
Integrating surface-based in-situ and satellite observations to characterize CO2 and CH4 emission hotspots in Houston, USA
- 16 October 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 363
Box-modeling of O3 and its sensitivity towards VOCs and NOx in Mexico city under altered emission conditions
- 16 October 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 363
Box-modeling of O3 and its sensitivity towards VOCs and NOx in Mexico city under altered emission conditions
- Open Access
- 1 August 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (8) , 931
Machine-Learning Models for Surface Ozone Forecast in Mexico City
Mexico City frequently experiences high near-surface ozone concentrations, and exposure to elevated near-surface ozone causes harmful effects to the inhabitants and the environment of Mexico City. This necessitates developing models for Mexico City that predict near-surface ozone levels in advance. Such models are crucial for regulatory procedures and can save a great deal of near-surface ozone detrimental effects by serving as early warning systems. We utilize three machine-learning models, trained on seven-year data (2015–2021) and tested on one-year data (2022), to forecast the near-surface ozone concentrations. The trained models predict the next day’s 24-h near-surface ozone concentrations for up to one month; before forecasting the following months, the models are trained again and updated. Based on prediction results, the convolutional neural network outperforms the rest of the models on a yearly scale with an index of agreement of 0.93 for three stations, 0.92 for nine stations, and 0.91 for one station.
- 1 August 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (8) , 931
Open AccessMachine-Learning Models for Surface Ozone Forecast in Mexico City
Mexico City frequently experiences high near-surface ozone concentrations, and exposure to elevated near-surface ozone causes harmful effects to the inhabitants and the environment of Mexico City. This necessitates developing models for Mexico City that predict near-surface ozone levels in advance. Such models are crucial for regulatory procedures and can save a great deal of near-surface ozone detrimental effects by serving as early warning systems. We utilize three machine-learning models, trained on seven-year data (2015–2021) and tested on one-year data (2022), to forecast the near-surface ozone concentrations. The trained models predict the next day’s 24-h near-surface ozone concentrations for up to one month; before forecasting the following months, the models are trained again and updated. Based on prediction results, the convolutional neural network outperforms the rest of the models on a yearly scale with an index of agreement of 0.93 for three stations, 0.92 for nine stations, and 0.91 for one station.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Air Quality in Mexico-City: Emissions, Transport, and Chemical Transformation
During the period March 12-17, 2016, Mexico-City experienced its most severe smog episode since 2007. The Metropolitan Index of Air Quality (IMECA) for Mexico-City surpassed the value of 200, indicating an extremely bad situation. Hourly peak values for both, NO2 and O3, exceeded 200 ppb, while for CO more than 2 ppm were observed. Restrictions on traffic and industrial activities, among other emergency measures, were imposed. We describe results from Positive Matrix Factorization (PMF) for source apportionment based on a commixture of gasphase compounds (VOCs, CO, NO, NO2, SO2, NH3) along with equivalent black carbon (eBC), and ions (Na+, Mg2+, Ca2+, NO3-, NH4+) in combination with an analysis of regional meteorological processes and boundary layer conditions retrieved from continuous microwave radiometer measurements. Apart from more traditional emission sources, the PMF analysis also deciphered a geogenic source. Continuous boundary layer height data was used to normalize mixing ratios of pollutants representative for each source factor. This procedure allowed the retrieval of diurnal variations of pollutants predominantly determined by emissions and removal mechanisms. The results show prolonged daytime emissions of O3 precursors beyond the typical morning rush hour, an important information to optimize O3 mitigation strategies. Propylene Equivalent and Maximum Incremental Reactivity (MIR) methods identified isoprene and ethylene as the highest oxidant and O3 forming species which indicates some interchange of individual top VOC contributors to ozone formation in that city over the last decades. This presentation concludes with results from air quality modeling including Machine Learning approaches. While the Deep Neural Network, Random Forest and Gradient Tree Boosting models are depicting diurnal O3 levels nicely, as long as O3 mixing ratios are at moderate levels (≤120 ppb) only the Deep Neural Network may capture peak ozone values (>160 ppb), which are most critical with regard to public health.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessAir Quality in Mexico-City: Emissions, Transport, and Chemical Transformation
During the period March 12-17, 2016, Mexico-City experienced its most severe smog episode since 2007. The Metropolitan Index of Air Quality (IMECA) for Mexico-City surpassed the value of 200, indicating an extremely bad situation. Hourly peak values for both, NO2 and O3, exceeded 200 ppb, while for CO more than 2 ppm were observed. Restrictions on traffic and industrial activities, among other emergency measures, were imposed. We describe results from Positive Matrix Factorization (PMF) for source apportionment based on a commixture of gasphase compounds (VOCs, CO, NO, NO2, SO2, NH3) along with equivalent black carbon (eBC), and ions (Na+, Mg2+, Ca2+, NO3-, NH4+) in combination with an analysis of regional meteorological processes and boundary layer conditions retrieved from continuous microwave radiometer measurements. Apart from more traditional emission sources, the PMF analysis also deciphered a geogenic source. Continuous boundary layer height data was used to normalize mixing ratios of pollutants representative for each source factor. This procedure allowed the retrieval of diurnal variations of pollutants predominantly determined by emissions and removal mechanisms. The results show prolonged daytime emissions of O3 precursors beyond the typical morning rush hour, an important information to optimize O3 mitigation strategies. Propylene Equivalent and Maximum Incremental Reactivity (MIR) methods identified isoprene and ethylene as the highest oxidant and O3 forming species which indicates some interchange of individual top VOC contributors to ozone formation in that city over the last decades. This presentation concludes with results from air quality modeling including Machine Learning approaches. While the Deep Neural Network, Random Forest and Gradient Tree Boosting models are depicting diurnal O3 levels nicely, as long as O3 mixing ratios are at moderate levels (≤120 ppb) only the Deep Neural Network may capture peak ozone values (>160 ppb), which are most critical with regard to public health.