Jana Kielhorn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jana Kielhorn has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Florian Jakobs
Institut für Hochfrequenztechnik, Technische Universität Braunschweig, 38106 Braunschweig, Germany
7 shared publications - Hans-Hermann Johannes
Institut für Hochfrequenztechnik, Technische Universität Braunschweig, Braunschweig, Germany
5 shared publications Wolfgang Kowalsky
TU Braunschweig, Institut für Hochfrequenztechnik, Braunschweig, Germany
4 shared publications- Daniel Zaremba
Institut für Hochfrequenztechnik, Technische Universität Braunschweig, 38106 Braunschweig, Germany
3 shared publications Detlev Ristau
Laser Zentrum Hannover e.V., Hannover, Germany
3 shared publicationsHans-Hermann Johannes
TU Braunschweig, Institut für Hochfrequenztechnik, Braunschweig, Germany
3 shared publications
Latest Publications
- Open Access
Towards Highly Efficient Polymer Fiber Laser Sources for Integrated Photonic Sensors
Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological or medical sciences. While the microfluidic approach is already broadly addressed, some work needs to be done regarding the integrated optics, especially provision of highly integrable laser sources. Polymer optical fiber (POF) lasers represent an alignment-free, rugged, and flexible technology platform. Additionally, POFs are intrinsically compatible to polymer microfluidic devices. Home-made Rhodamine B (RB)-doped POFs were characterized with experimental and numerical parameter studies on their lasing potential. High output energies of 1.65 mJ, high slope efficiencies of , and -lifetimes of ≥900 k shots were extracted from RB:POFs. Furthermore, RB:POFs show broad spectral tunability over several tens of nanometers. A route to optimize polymer fiber lasers is revealed, providing functionality for a broad range of LoC devices. Spectral tunability, high efficiencies, and output energies enable a broad field of LoC applications.Open AccessTowards Highly Efficient Polymer Fiber Laser Sources for Integrated Photonic Sensors
Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological or medical sciences. While the microfluidic approach is already broadly addressed, some work needs to be done regarding the integrated optics, especially provision of highly integrable laser sources. Polymer optical fiber (POF) lasers represent an alignment-free, rugged, and flexible technology platform. Additionally, POFs are intrinsically compatible to polymer microfluidic devices. Home-made Rhodamine B (RB)-doped POFs were characterized with experimental and numerical parameter studies on their lasing potential. High output energies of 1.65 mJ, high slope efficiencies of , and -lifetimes of ≥900 k shots were extracted from RB:POFs. Furthermore, RB:POFs show broad spectral tunability over several tens of nanometers. A route to optimize polymer fiber lasers is revealed, providing functionality for a broad range of LoC devices. Spectral tunability, high efficiencies, and output energies enable a broad field of LoC applications. - Open Access
Homogeneous Distribution of Polymerizable Coumarin Dyes for Active Few Mode POF
For most kinds of active polymer optical fibers, a homogeneous distribution of dye molecules over the entire fiber length and cross section is required. In this study, chemical bonding of dyes to poly(methyl methacrylate) (PMMA) by copolymerization is achieved within the polymerization process instead of dissolving the dyes in the monomers. In combination with an improved fabrication mechanism, this leads to homogeneous dye distribution within the preforms. A method for proving the integration of the dyes into the polymer chains has been developed using high-performance liquid chromatography (HPLC) and size exclusion chromatography (SEC). Prestructured core-cladding preforms with dye-doped poly(cylohexyl methacrylate-co-methyl methacrylate)-core have been prepared with the Teflon string technique and were heat-drawn to few mode fibers.
Open AccessHomogeneous Distribution of Polymerizable Coumarin Dyes for Active Few Mode POF
For most kinds of active polymer optical fibers, a homogeneous distribution of dye molecules over the entire fiber length and cross section is required. In this study, chemical bonding of dyes to poly(methyl methacrylate) (PMMA) by copolymerization is achieved within the polymerization process instead of dissolving the dyes in the monomers. In combination with an improved fabrication mechanism, this leads to homogeneous dye distribution within the preforms. A method for proving the integration of the dyes into the polymer chains has been developed using high-performance liquid chromatography (HPLC) and size exclusion chromatography (SEC). Prestructured core-cladding preforms with dye-doped poly(cylohexyl methacrylate-co-methyl methacrylate)-core have been prepared with the Teflon string technique and were heat-drawn to few mode fibers.
- Open Access
Characterization of Double-Doped Polymer Optical Fibers as Luminescent Solar Concentrators
This work reports on a diameter dependence analysis of the performance as luminescent solar concentrators of three self-fabricated polymer optical fibers (POFs) doped with a hybrid combination of dopants. The works carried out include the design and self-fabrication of the different diameter fibers; an experimental analysis of the output power, of the output irradiance and of the fluorescent fiber solar concentrator efficiency; a comparison of the experimental results with a theoretical model; a study of the performance of all the fibers under different simulated lighting conditions; and a calculation of the active fiber length of each of the samples, all of them as a function of the fiber core diameter. To the best of our knowledge, this paper reports the first analysis of the influence of the POF diameter for luminescent solar concentration applications. The results obtained offer a general perspective on the optimal design of solar energy concentrating systems based on doped POFs and pave the way for the implementation of cost-effective solar energy concentrating devices.
Open AccessCharacterization of Double-Doped Polymer Optical Fibers as Luminescent Solar Concentrators
This work reports on a diameter dependence analysis of the performance as luminescent solar concentrators of three self-fabricated polymer optical fibers (POFs) doped with a hybrid combination of dopants. The works carried out include the design and self-fabrication of the different diameter fibers; an experimental analysis of the output power, of the output irradiance and of the fluorescent fiber solar concentrator efficiency; a comparison of the experimental results with a theoretical model; a study of the performance of all the fibers under different simulated lighting conditions; and a calculation of the active fiber length of each of the samples, all of them as a function of the fiber core diameter. To the best of our knowledge, this paper reports the first analysis of the influence of the POF diameter for luminescent solar concentration applications. The results obtained offer a general perspective on the optimal design of solar energy concentrating systems based on doped POFs and pave the way for the implementation of cost-effective solar energy concentrating devices.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Polymer Fiber Lasers
Polymers doped with laser dyes are promising materials for solid state dye lasers. The development of dye doped polymer optical fibers is presented. Furthermore, experimental results from polymer bulk and fiber lasers based on these optical materials are reported.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Polymer Fiber Lasers
Polymers doped with laser dyes are promising materials for solid state dye lasers. The development of dye doped polymer optical fibers is presented. Furthermore, experimental results from polymer bulk and fiber lasers based on these optical materials are reported.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Laser-Induced Damage in Passive and Active Polymer Optical Fibers
Optical fibers have many applications in the automobile industries and aviation industry, medicine and laser technology. Polymer optical fibers (POF) show some benefits compared to glass fibers. POFs have high mechanical durability and a low net weight. However, low optical radiation resistivity and high attenuation are limiting factors for possible areas of application. In this study, the maximum transmittable pulse energy which, does not induce a significant damage in polymer optical fibers, is determined using a nanosecond pulsed laser at a wavelength of 532nm and a repetition frequency of 10 Hz. Previous laser-induced damage tests on polymer optical fibers with a diameter of about 500 μm using three different coupling lenses are used for a rough estimate of the power compatibility up to a pulse energy of approximately 0.6 mJ for catastrophic damage [1].
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Laser-Induced Damage in Passive and Active Polymer Optical Fibers
Optical fibers have many applications in the automobile industries and aviation industry, medicine and laser technology. Polymer optical fibers (POF) show some benefits compared to glass fibers. POFs have high mechanical durability and a low net weight. However, low optical radiation resistivity and high attenuation are limiting factors for possible areas of application. In this study, the maximum transmittable pulse energy which, does not induce a significant damage in polymer optical fibers, is determined using a nanosecond pulsed laser at a wavelength of 532nm and a repetition frequency of 10 Hz. Previous laser-induced damage tests on polymer optical fibers with a diameter of about 500 μm using three different coupling lenses are used for a rough estimate of the power compatibility up to a pulse energy of approximately 0.6 mJ for catastrophic damage [1].
- 16 November 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10805, 83
Determination of the laser-induced damage threshold of polymer optical fibers
Investigating the properties of manufactured polymer optical fibers is essential to determine proper areas of application. Using pulsed laser radiation, especially with respect to laser activity in optical fibers, the maximum acceptable transmittable energy without inducing damage is of particular interest. Therefore, this work is related to laser-induced damage in polymer optical fibers at a wavelength of 532 nm and a pulse duration of 7.3 ns. In particular, the influence of the coupling condition on the transmittable pulse energy and the damage behavior applying an R-on-1 test procedure are analyzed in this study. The obtained results give information about the long-term behavior and will be used to optimize the manufacturing process.
- 16 November 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10805, 83
Determination of the laser-induced damage threshold of polymer optical fibers
Investigating the properties of manufactured polymer optical fibers is essential to determine proper areas of application. Using pulsed laser radiation, especially with respect to laser activity in optical fibers, the maximum acceptable transmittable energy without inducing damage is of particular interest. Therefore, this work is related to laser-induced damage in polymer optical fibers at a wavelength of 532 nm and a pulse duration of 7.3 ns. In particular, the influence of the coupling condition on the transmittable pulse energy and the damage behavior applying an R-on-1 test procedure are analyzed in this study. The obtained results give information about the long-term behavior and will be used to optimize the manufacturing process.
- 1 November 2018
- Published by Pleiades Publishing Ltd in Optics and Spectroscopy
- Vol. 125 (5) , 711-715
Integration of β-NaYF4 Upconversion Nanoparticles into Polymers for Polymer Optical Fiber Applications
Producing active polymer optical fibers (POFs) is a key step towards new applications such as fluorescent fiber solar concentrators (FFSCs), sensors, contactless coupling devices, or fiber...
- 1 November 2018
- Published by Pleiades Publishing Ltd in Optics and Spectroscopy
- Vol. 125 (5) , 711-715
Integration of β-NaYF4 Upconversion Nanoparticles into Polymers for Polymer Optical Fiber Applications
Producing active polymer optical fibers (POFs) is a key step towards new applications such as fluorescent fiber solar concentrators (FFSCs), sensors, contactless coupling devices, or fiber...
- 23 May 2018
- Published by Wiley in Polymer International
- Vol. 67 (9) , 1179-1185
Molecular weight variations in perylene‐doped poly(methyl methacrylate) for luminescent solar concentrators
Integrating highly efficient luminescent dyes into poly(methyl methacrylate) matrices with well‐defined parameters, such as degree of polymerization and dispersity, is a key step in the development of emerging technologies such as fiber‐based solar collectors, sensors, contactless coupling devices and integrated light sources. In this work, four perylene‐based fluorescent dyes, perylene from Sigma‐Aldrich, Lumogen F Yellow 083 from BASF, Perylene Orange from TCI and Lumogen F Red 300 from BASF, were polymerized in bulk with methyl methacrylate. The molecular weight distribution was controlled by the ratio between the chain transfer agent and initiator and was measured by size exclusion chromatography. A dopant‐dependent increase in the degree of polymerization, in which the dye causes a drop in the concentration of active growing polymer chains, was observed. Spectroscopic online monitoring of the process in transmission mode confirmed this observation and indicated the formation of stable perylene radicals during the polymerization. Comparative experiments with fluorescent (metal) organic dyes did not show a similar effect. Fitting models for the dye‐dependent molecular weights for Lumogen Yellow and Lumogen Red are proposed. © 2018 Society of Chemical Industry
- 23 May 2018
- Published by Wiley in Polymer International
- Vol. 67 (9) , 1179-1185
Molecular weight variations in perylene‐doped poly(methyl methacrylate) for luminescent solar concentrators
Integrating highly efficient luminescent dyes into poly(methyl methacrylate) matrices with well‐defined parameters, such as degree of polymerization and dispersity, is a key step in the development of emerging technologies such as fiber‐based solar collectors, sensors, contactless coupling devices and integrated light sources. In this work, four perylene‐based fluorescent dyes, perylene from Sigma‐Aldrich, Lumogen F Yellow 083 from BASF, Perylene Orange from TCI and Lumogen F Red 300 from BASF, were polymerized in bulk with methyl methacrylate. The molecular weight distribution was controlled by the ratio between the chain transfer agent and initiator and was measured by size exclusion chromatography. A dopant‐dependent increase in the degree of polymerization, in which the dye causes a drop in the concentration of active growing polymer chains, was observed. Spectroscopic online monitoring of the process in transmission mode confirmed this observation and indicated the formation of stable perylene radicals during the polymerization. Comparative experiments with fluorescent (metal) organic dyes did not show a similar effect. Fitting models for the dye‐dependent molecular weights for Lumogen Yellow and Lumogen Red are proposed. © 2018 Society of Chemical Industry
- Open Access
- 1 May 2018
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 178, 20-28
High performance fluorescent fiber solar concentrators employing double‐doped polymer optical fibers
- 1 May 2018
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 178, 20-28
Open AccessHigh performance fluorescent fiber solar concentrators employing double‐doped polymer optical fibers