Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Irina Vladimirovna Mursenkova has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Shock wave influence on the afterglow of nanosecond discharge in air

    by Irina V. Mursenkova, Anna A. Ivanova, Alexander Yu. Kuznetsov

    This work investigates the afterglow features of a nanosecond combined volume discharge in air in the presence of shock waves with Mach numbers 3.0–5.0. The discharge glow was recorded with nanosecond time resolution. The measurements were performed near the front of a plane shock wave and a diffracted shock wave. An increase in the glow intensity was observed during the afterglow stage in all experiments. The discharge radiation analysis was complemented by modeling of molecular nitrogen emission in shock-compressed discharge plasma. The modeling results indicate that the afterglow maximum is related to the kinetics of the excited states of molecular nitrogen under shock compression of the relaxing plasma. Plasma-chemical processes in discharge plasma interacting with a shock wave are important for plasma-aerodynamic approaches to controlling high-speed flows.

  • Open Access

    Investigation and Application of Nanosecond Discharges for Supersonic Flow Structure Visualization

    by I.V. Mursenkova, A.A. Ivanova, A.S. Sazonov

    An experimental study was carried out on the spatial distribution of glow in a nanosecond surface sliding discharge and a combined volume discharge in supersonic air flows around a streamlined axisymmetric body in a channel. The flow in the discharge chamber included shock waves generated by the flow around the body and those reflected from the channel walls. Flow visualization was performed by the direct shadowgraphy and by recording the discharge glow with photo cameras and ICCD camera. Supersonic air flows with Mach numbers of 1.36–1.60 were generated behind plane shock waves with Mach numbers of 3.0–4.4 in a in a rectangular shock tube channel. Discharges were initiated under a voltage pulse of 25 kV either along the surface or within the volume, extending up to 100 mm along the flow direction. Spatial emission characteristics of the discharge initiated at various stages of gas-dynamic flow were analyzed. Digital image processing and analysis of the glow captured during discharge development were carried out and compared with shadowgraphy images of the flow field. A correlation was demonstrated between the emission distribution of the sliding surface discharge in supersonic flows and the state of the boundary layer on the channel wall where the discharge develops. Comparison of volume discharge images with shadowgraphy frames enabled the reconstruction of the three‑dimensional structure of the supersonic flow, featuring a bow shock in front of the body and the oblique shock waves downstream.

  • Diffracted shock wave propagation in a pulsed volume discharge plasma

    by A. Ivanova, I. Mursenkova, I. Kryukov, I. Ivanov, I. Znamenskaya

    The paper presents the results of experimental and numerical studies of the interaction of a nanosecond combined volume discharge and diffracted shock waves in air at Mach numbers ranging from 2.20 to 4.40. The spatial and temporal characteristics of the discharge were determined by analyzing the current waveforms, photographing the discharge glow, and imaging the discharge radiation with nanosecond resolution. The gasdynamic flow in the test section, which had transparent sidewalls, was visualized using the direct shadowgraph technique and recorded by a high-speed video camera operating at up to 525 000 fps. The experiments demonstrated changes in the dynamics of the shock wave configuration as it moved through the plasma region. Numerical simulations were performed based on the Navier–Stokes equations for viscous compressible gas. The power and dynamics of the energy deposition were varied to compare with the experimental flow patterns. The electrical energy of the discharge converted into heat was estimated to range from 0.12 to 0.20 J for the volumetric region and from 0.23 to 0.35 J for the areas of surface energy input. The obtained results help clarify the mechanism of influence of the pulsed energy deposition on supersonic flow with consideration of relaxation processes in the plasma. In general, the change in shock wave flow resulting from the interaction of shock waves with plasma regions is important when considering ways to control high-speed flows.


  • Investigation of a Nanosecond Sliding Surface Discharge in Time-Dependent Supersonic Air Flow in a Channel

    by I. E. Ivanov, I. V. Mursenkova, A. S. Sazonov, N. N. Sysoev

    The regimes of development of a 500 ns sliding surface discharge are experimentally studied in time-dependent supersonic air flows in the channel of shock tube with a rectangular cross-section. The Mach numbers of the shock waves were from 2.30 to 5.00 at the initial air pressures from 2 to 100 Torr and the Mach numbers in the flow were from 1.18 to 1.66. A 100 mm-long sliding surface discharge was initiated at a given moment of time in different stages of the time-dependent supersonic flow after plane shock wave diffraction on an obstacle and in a quasistationary flow past the obstacle in the presence of an inclined shock wave. The discharge current and spatial radiation characteristics were analyzed. The high-speed shadowgraphy of the flow fields was carried out at the frequency up to 525 000 frames per second. The numerical modeling of the channel flow was performed within the framework of the Navier–Stokes equations. The comparison of the experimental and numerical results made it possible to establish the correlation between the parameters of a low-density zone formed as a result of the interaction between the oblique shock wave and a boundary layer and the regime in which the discharge current proceeds. The flow structure in the channel is analyzed after the discharge initiation, when a near-semi-cylindrical shock wave is formed. The comparison of the experimental and numerical results shows the thermal energy released in the discharge current region amounts to from 0.15 to 0.36 J.


  • Open Access

    High-Speed Flow Visualization by a Nanosecond Volume Discharge during Shock Wave Diffraction on an Obstacle

    by I. Mursenkova, A. Ivanova, I. Ivanov, N. Sysoev, A. Karimov

    We study the spatial structure of nonstationary inhomogeneous supersonic airflows as shock wave diffraction on an obstacle occurs in a shock tube of a rectangular cross section. The Mach numbers of shock waves were 2.7–4.4 at initial air pressures of 10–30 Torr. The supersonic flow in the discharge chamber was visualized by high-speed shadowgraphy and by the registration of radiation of combined volume discharge by photo camera and by ICCD camera. In experiments, a combined volume discharge with a current duration of ~ 500 ns was initiated 40–150 μs after the initial shock wave have passed an obstacle. It has been established that the radiation of the volume phase of discharge lasts 400–700 ns, and the displacement of the flow during this time does not exceed 0.6 mm. A correlation is established between the spatial distribution of discharge radiation and the low-density local areas determined as a result of two-dimensional Navier-Stokes based numerical simulation of the flow. As visualized by the glow of the discharge, the shape of the shock wave front is in good agreement with the results of shadowgraphy at different stages of diffraction and with the numerical simulation results.


  • The Study of Surface Sliding Discharge Interacting with an Oblique Shock Wave

    by I. V. Mursenkova, I. E. Ivanov, Yu. Liao, A. F. Ziganshin

    A distributed surface sliding discharge with a duration of 500 ns in supersonic air flows with an oblique shock wave had been experimentally studied. The Mach numbers of the flows were 1.18–1.68, the density was 0.02–0.45 kg/m3. The discharge was initiated in a single pulse mode. With a voltage of 25 kV, the discharge current was about 1 kA. It is shown that the discharge current, as well as the spatio-temporal characteristics of the radiation depend on the parameters of the local rarefaction zone in the boundary layer. In a stationary flow with an oblique shock wave, the discharge is generated as a single channel. Analysis of high-speed shadowgraphy of the flow after discharge showed that a single discharge channel generates a semi-cylindrical shock wave. The purpose of the work was to study the motion of the shock wave generated from the discharge under different conditions of supersonic flow. Comparison of the experimental dynamic of the shock wave with the results of numerical modelling of the flow based on the non-stationary Navier–Stokes equations showed that the value of the thermal energy released in the discharge channel is 0.15–0.36 J.

  • Experimental Study of the Motion of a Shock Wave in the Plasma of a Pulsed Volume Discharge in Air

    by A. A. Ivanova, I. V. Mursenkova

    The motion of quasi-plane shock waves with Mach numbers M $$=2.20{-}3.50$$ in the plasma of a nanosecond combined volume discharge in air at an initial pre


  • Open Access

    Experimental and Numerical Investigation of a Surface Sliding Discharge in a Supersonic Flow with an Oblique Shock Wave

    by Irina V. Mursenkova, Igor E. Ivanov, Yugan Liao, Igor A. Kryukov

    This study presents an experimental and numerical investigation on a surface sliding discharge in a supersonic airflow in the presence of an oblique shock wave. In experiments, flow Mach numbers were 1.20–1.68 in the shock tube combined with the discharge chamber. A single high-voltage 25 kV pulse sustains the plasma; the discharge current has a duration of ~500 ns. A surface sliding discharge is developed as a localized channel in a zone of interaction of an oblique shock wave with a boundary layer on the upper wall of the discharge chamber. The discharge channel acts as a linear source of heat and is at the origin of the induced shock wave. The flow field in the discharge chamber is spatio-temporally surveyed using high-speed shadowgraphy imaging with a frequency of up to 525,000 frames per second. The experiments show that the perturbed flow restored the initial structure after more than 100 μs. Numerical simulation with local energy input into the supersonic flow in a flat channel is carried out on the base of unsteady two-dimensional Navier–Stokes equations. It is determined that the dynamics of an induced shock wave are dependent on the energy input regime and on the flow parameters. The thermal energy release in the discharge channel of 0.22–0.29 J was estimated from a comparison of experimental data and numerical simulations.


  • Open Access

    Investigation on nanosecond surface sliding discharge in a supersonic airflow with oblique shock wave

    by I Mursenkova, I Ivanov, P Ulanov, Yu Liao, A Sazonov

    We report investigations of the nanosecond surface sliding discharge in supersonic airflows with the oblique shock wave at Mach numbers of the flow 1.30-1.60 in shock tube. We show that the surface sliding discharge developed in flows as a single channel located near a zone of interaction of the oblique shock with the boundary layer on the wall of the channel. A pulse voltage of 25 kV powered the discharge; the electric current was of 1 kA. The electron concentration in the localized discharge channel was (0.7-1.4).1015 cm-3 and the electron energy was of 1.8-2.2 eV from the analysis the emission spectra. High-speed flow field shadowgraphy after the surface sliding discharge showed that the localized discharge channel generates a strong shock wave, leading to restructuring the shock-wave structure of the flow within ∼100 μs and subsequent relaxation to a stationary configuration.