BSBai-Peng Song

Bai-Peng Song

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bai-Peng Song has a total of 141 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interfacial charge transport regulation in nanocoated polyimide films toward combined mitigation of electron-beam charging and surface flashover

    by Wentong An, Baipeng Song, Yuetong Liu, Fei Pang, Guangyu Sun, Huapeng Li, Liyao Zhang, Jiaqi Deng, Dan Wang, Xiaogang Qin, et al.

  • Open Access

    Numerical Simulation of Shock Wave Generation and Energy Conversion Efficiency in Underwater Nanosecond Pulsed Discharge

    by Jiaqi Deng, Kehan Cao, Huapeng Li, Yanqun Fu, Chao Lyu, Yunpeng Lu, Qiang Yue, Mingyi Zhang, Jiaqi Wen, Peng Wang, et al.

    Shock waves generated by underwater nanosecond pulsed discharge offer advantages such as high peak pressure, broad bandwidth, and strong controllability, showing promising application prospects in areas like underwater acoustic sources. Current research largely focuses on individual stages and lacks a full-process analysis framework that spans from discharge parameters to shock wave output. To address this, this paper develops a numerical simulation model covering both the pre-breakdown and main discharge stages. In the pre-breakdown stage, based on field-induced ionization theory, coupled equations of charged particle drift-diffusion, Poisson’s equation, and heat transfer are established to simulate the evolution of the streamer from initiation to bridging; the parameters obtained at the end of pre-breakdown are then used as initial values for the main discharge stage. In the main discharge stage, the plasma channel is modeled as a variable-resistance cylinder, and the discharge circuit is coupled with the energy conservation equation to quantitatively describe the conversion process from electrical energy to the mechanical energy of the shock wave, as well as to analyze the attenuation characteristics of the shock wave during near-field propagation. Based on the above, this paper systematically investigates the influence of pulse voltage amplitude, electrode gap, and electrode curvature radius on the discharge process and energy conversion. Increasing the voltage can shorten the breakdown time delay and enhance the deposited energy, but high-temperature radiation leads to a decrease in the shock wave energy conversion efficiency; increasing the electrode gap distance is beneficial for enhancing the deposited energy, but increases thermal radiation loss; increasing the curvature radius has a limited effect on improving energy conversion. The influence of each parameter on the shock wave amplitude exhibits a saturation effect, the intrinsic mechanism of which stems from the competition between the deposited energy gain and the dissipation mechanism. The integrated simulation framework established in this paper provides a basis for analysing parameter trends and for guiding the design of underwater pulsed discharge acoustic sources, subject to the assumptions and validation discussed in the paper.

  • Atomic oxygen-induced surface reconstruction and insulation degradation mechanisms of commercial and intrinsic fluorinated polyimide films

    by Changchun Qi, Xiong Yang, Jiufeng Dong, Guangyu Sun, Wenrui Li, Ke Li, Fei Pang, Haoyan Liu, Xiaogang Qin, Baipeng Song, et al.

  • Prediction of vacuum surface flashover thresholds: comparison of physical, statistical, and machine learning models

    by Yao-Qi Wu, Guang-Yu Sun, Chang-Chun Qi, Wen-Dong Li, Xiong Yang, Bai-Peng Song, Guan-Jun Zhang

    Vacuum surface flashover remains a major constraint for a variety of high-voltage vacuum insulation systems. Because flashover is governed by numerous coupled effects of material, geometry, voltage waveform, surface condition, and discharge history, reliable flashover threshold prediction using statistical and physics-based models remains challenging. To address this issue, a first-of-its-kind machine-learning (ML) based framework for vacuum surface flashover is proposed. First, a comprehensive vacuum flashover database is constructed. Six ML models were evaluated on the original dataset, and random forest (RF) and Histogram Gradient Boosting (HGB) demonstrated superior performance to the others. To further increase the prediction accuracy, several data augmentation methods were employed to increase the size of the database. It was found that threefold PureBootstrap performed the best, achieving a column shapes score of 96.10% and a column pair trends score of 97.78%. After augmentation, the dataset containing 902 samples and 19 features was used to further train RF and HGB for flashover threshold prediction. Compared with the J. C. Martin empirical formula and physical model based on the secondary electron emission avalanche, the ML models achieve substantially better prediction performance, with R 2 values of 0.92 for RF and 0.93 for HGB, higher than 0.24 and 0.22 for the J. C. Martin formula and the physical model, respectively. The employed ML models are interpretable, and illustrated that insulation system geometry and applied voltage waveform are among the most critical factors determining the flashover threshold. This work offers novel insights into flashover risk assessment in vacuum insulation design.

  • Ion irradiation-induced degradation of surface insulation performance in Cu–PI alternating structures for solar array drive assemblies

    by Huapeng Li, Baipeng Song, Changchun Qi, Jiaqi Deng, Fei Pang, Liyao Zhang, Sheng Zhou, Ke Li, Yongliang Liu, Feng Zou, et al.

    The development of high-voltage and high-power spacecraft subjects the vacuum surface insulation reliability of solar array drive assembly conductive slip rings to severe challenges from high-energy charged particle irradiation in space. Addressing the issue that existing studies often neglect the in situ metal–insulator coupling effect, this work focuses on Cu–polyimide (PI) alternating structures to systematically investigate the degradation mechanisms of insulation performance under Ar+ irradiation with different irradiation times. Multi-scale morphological and chemical composition characterizations indicate that the ion irradiation damage is associated with the concurrent occurrence of matrix etching degradation and metal sputtering deposition. Irradiation induces deoxidation, denitrogenation, and main-chain scission of the PI substrate, leading to a structurally disordered porous surface; simultaneously, copper atoms from lateral sputtering aggregate on the PI surface, oxidizing to form Cu-containing nanoclusters. Isothermal surface potential decay measurements reveal that the destruction of the intrinsic PI structure and the introduction of the metal interface lead to an increase in shallow trap density. Concurrently, the surface resistivity decreases significantly, the secondary electron yield (SEY) rises, and the pulsed flashover threshold drops. Analysis based on the secondary electron emission avalanche model indicates that the synergistic effect of the increased shallow traps, decreased surface resistivity, and elevated SEY leads to a drastic reduction in the vacuum pulsed flashover threshold of this alternating structure. The in situ coupled irradiation degradation mechanism of the planar Cu–PI alternating structure investigated in this work can provide an experimental reference for the anti-irradiation design of high-voltage spacecraft insulation structures.

  • Open Access

    Atomic Oxygen-Induced Surface Reconstruction and Insulation Degradation Mechanisms of Commercial and Intrinsic Fluorinated Polyimide Films

    by Changchun Qi, Xiong Yang, Jiufeng Dong, Guangyu Sun, Wenrui Li, Ke Li, Fei Pang, Haoyan Liu, Xiaogang Qin, Baipeng Song, et al.

    Atomic oxygen (AO) erosion in the low Earth orbit (LEO) environment causes severe surface degradation and flashover risk in insulating materials, threatening the stable operation of high-voltage spacecraft systems. A systematic understanding of the correlation between AO-induced multiscale structural evolution and dielectric surface charging/discharging behavior is crucial for developing AO-resistant spacecraft dielectrics. Herein, an intrinsically fluorinated polyimide (FPI) was prepared and a commercial PMDA‐ODA polyimide (KPI) was used as a reference to systematically investigate the effects of AO erosion on surface morphology, chemical structure, and surface electrical properties. The results show that AO erosion leads to physical, chemical and electrical evolution, including surface roughening and particle agglomeration, triggers destruction of the aromatic skeleton, molecular chain scission, and oxidation reactions, and concurrently causes loosening of chain packing and an increase in free volume. These structural evolutions further modulate surface trap states and gas adsorption-desorption characteristics, thereby altering secondary electron emission behavior and surface flashover characteristics. KPI exhibits enhanced secondary electron emission avalanche (SEEA) owing to greater oxidation and increased secondary electron yield (SEY), leading to pronounced insulation degradation. In contrast, the -CF3 groups in FPI effectively suppress AO-induced surface damage and reduce SEY by deepening trap levels, thereby significantly inhibiting surface flashover; even after high-fluence AO exposure, the surface insulating strength of FPI remains superior to that of pristine KPI. A phenomenological model of secondary electron emission under AO erosion was established to explain the opposite trends in secondary electron yield (SEY) observed for KPI and FPI. This study reveals the coupling relationship between polymer surface structure, and discharge behavior under AO exposure, providing a new molecular structure modification strategy for the design of polymer insulating materials with high AO erosion resistance for the space applications.

  • Influence of pre-existing negative surface charges on secondary electron emission avalanche evolution in vacuum surface flashover of spacecraft

    by Yue-Tong Liu, Bai-Peng Song, Guang-Yu Sun, Xiong Yang, Wen-Tong An, Li-Yao Zhang, Fei Pang, Jia-Qi Deng, Tian-Cun Hu, Fei Li, et al.

    Surface charging of dielectric materials is commonly observed in spacecraft under complex space environments. The accumulated charges on dielectric surfaces can modify the local electric-field distribution and subsequently affect secondary electron emission avalanche (SEEA), which plays a critical role in vacuum surface flashover. However, the influence mechanism of pre-existing surface charges formed before discharge initiation on the subsequent SEEA evolution remains insufficiently understood. In this work, a 2-spatial- and 3-velocity-dimensional particle-in-cell model is employed to investigate the effect of pre-existing negative surface charges near the cathode on vacuum surface flashover development. Different levels of localized negative surface charge densities are introduced as initial charging states, and their effects on electron emission, avalanche evolution, surface charge accumulation, and electric-field redistribution are systematically analyzed. The results demonstrate that the pre-existing charge of dielectric surfaces can strongly regulate subsequent vacuum flashover behavior, providing new insights into the coupling mechanism between surface charging and SEEA development in spacecraft and vacuum insulation systems.

  • Simulation Study on the Pre-Breakdown Process of Underwater High-Voltage Pulsed Discharge Based on Field-Induced Ionization Theory

    by Kehan Cao, Xing Zhang, Yanfang Wu, Qiang Yue, Yunpeng Lu, Xinyuan Cai, Guanjun Zhang, Baipeng Song

  • Effect of ultraviolet-induced chemical structure degradation on surface insulation strength of polyimide films

    by Wen-Rui Li, Shi-Yin Zeng, Yu-Cheng Zhang, Guang-Yu Sun, Hao-Yan Liu, Chang-Chun Qi, Fei Pang, Xiao-Gang Qin, Bai-Peng Song, Guan-Jun Zhang

    Ultraviolet (UV) irradiation can induce pronounced surface degradation in polyimide (PI), which can consequently impair their surface insulation strength (the surface flashover threshold). In this work, the influence of UV-induced degradation on the surface flashover behavior of PI films is systematically investigated. Two commercially available PI films with distinct molecular structures are selected and subjected to accelerated UV irradiation to introduce controlled degradation states. The results indicate that UV exposure triggers molecular chain scission and surface structural reconstruction, leading not only to a deterioration in mechanical properties and thermal conductivity, but more critically to substantial modifications of near-surface electrical processes closely associated with surface flashover. Comprehensive characterizations of dielectric response, charge transport behavior, trap state distribution, and secondary electron emission properties indicate that UV-induced degradation promotes field electron emission at the cathode triple junction, deepens trap energy levels and suppresses charge dissipation, enhances secondary electron multiplication, and may intensify outgassing-related processes. These degradation-induced effects facilitate earlier flashover initiation and accelerates the subsequent development. In addition, the two PI films exhibit different sensitivities to UV-induced degradation, and the disparity in the deterioration of their surface flashover performance can be attributed to molecular-structure-dependent degradation pathways.


  • Study on discharge characteristics of different electrode structures in next-generation voltage level spacecraft under low-pressure environment

    by Huapeng Li, Jiaqi Deng, Yuanfeng Li, Kehan Cao, Liyao Zhang, Fei Pang, Changchun Qi, Sheng Zhou, Sha Zheng, Chengan Wan, et al.

    To meet the demand for 400 V bus voltage in next-generation spacecraft, insulation structures must withstand low-pressure discharge caused by material outgassing. However, existing studies on electrode geometries are insufficient for such high-voltage design. In this paper, we design six representative electrode structures (screw, busbar, I-type busbar, H-type busbar, circular, and circular with PI film) based on typical insulation-weak regions in spacecraft busbars, using FR-4 substrate and brass electrodes. Combining experiments and simulations in nitrogen (1–1000 Pa), we investigate how electrode configuration and pressure–distance parameter ( pd , with fixed gap distances) affect discharge voltage ( V d ) and extinction voltage ( V e ). The results indicate that all samples exhibit Paschen-like discharge characteristics, and the electrode structure influences the discharge threshold by regulating the discharge path length and the electric field concentration. The H-type busbar shows the best performance, with a long discharge path and diffused field distribution, achieving a minimum V d of 678 V. In contrast, traditional busbar electrodes and circular electrodes exhibit a minimum V d of only about 360 V, and the PI-film coating does not significantly improve the insulation performance of the tested circular configuration under the present conditions. These findings provide experimental data and engineering guidance for the design and protection of next-generation high-voltage insulation structures in spacecraft.