Wenlong Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Wenlong Tian has a total of 123 co-authors. Here are the top co-authors by number of shared publications:
- Jiangfeng Zhu
Xidian University
17 shared publications - Zhiyi Wei
Chinese Academy of Sciences
17 shared publications Geyang Wang
Xidian University
13 shared publicationsYang Yu
Xidian University
13 shared publicationsJiangfeng Zhu
Xidian University
10 shared publicationsLi Zheng
Shaanxi University of Technology
10 shared publications
Latest Publications
- Open Access
- 25 June 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-15
10-mJ level Regenerative Amplifier Based on Yb:CALGO Single Crystal with Spectral Shaping for Gain Narrowing Suppression
In this work, we demonstrate a high-energy regenerative amplifier based on a single Yb:CaGdAlO 4 (Yb:CALGO) crystal, delivering a pulse energy of 11.2 mJ at a 1 kHz repetition rate. To the best of our knowledge, this represents the highest pulse energy directly obtained from an Yb:CALGO single-crystal regenerative amplifier to date. To mitigate the severe gain narrowing typically associated with high-energy amplification, a specially designed polarization-spectral filter was integrated into the system to pre-shape the seed spectrum, enabling an amplified full width at half maximum spectral bandwidth of 10.1 nm. As a result, the amplified pulses were able to be compressed to a pulse duration of 198 fs without any pedestal. The output power stability, measured over 200 minutes, exhibited a root mean square fluctuation of 0.27%, and the beam quality factors were M x 2 = 1.08 and M y 2 = 1.17.
- 25 June 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-15
Open Access10-mJ level Regenerative Amplifier Based on Yb:CALGO Single Crystal with Spectral Shaping for Gain Narrowing Suppression
In this work, we demonstrate a high-energy regenerative amplifier based on a single Yb:CaGdAlO 4 (Yb:CALGO) crystal, delivering a pulse energy of 11.2 mJ at a 1 kHz repetition rate. To the best of our knowledge, this represents the highest pulse energy directly obtained from an Yb:CALGO single-crystal regenerative amplifier to date. To mitigate the severe gain narrowing typically associated with high-energy amplification, a specially designed polarization-spectral filter was integrated into the system to pre-shape the seed spectrum, enabling an amplified full width at half maximum spectral bandwidth of 10.1 nm. As a result, the amplified pulses were able to be compressed to a pulse duration of 198 fs without any pedestal. The output power stability, measured over 200 minutes, exhibited a root mean square fluctuation of 0.27%, and the beam quality factors were M x 2 = 1.08 and M y 2 = 1.17.
- 23 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1255-1258
High-performance Yb:CaYAlO 4 dual-crystal regenerative amplifier at 5 and 50 kHz repetition frequency
The Yb:CaYAlO 4 (Yb:CALYO) crystal, which boasts a very broad emission spectrum and moderate thermal conductivity, is highly promising for the generation of high-power femtosecond lasers with short pulse durations. However, research into Yb:CALYO-based high-power femtosecond amplifiers has been limited. Here, we report on a Yb:CALYO-based dual-crystal regenerative amplifier capable of delivering high average power and high pulse energy. The maximum single-pulse energy of 6.5 mJ was achieved at a 5-kHz repetition rate, corresponding to an average power of 32.5 W. Additionally, the maximum average power of 65.2 W was achieved at a 50-kHz repetition rate, corresponding to a single-pulse energy of 1.3 mJ. In both instances, the pulse durations were shorter than 200 fs, accompanied by good power stability. To the best of our knowledge, these results represent the highest average power and pulse energy ever achieved from a Yb:CALYO-based femtosecond amplifier, indicating that Yb:CALYO is an excellent candidate for high-power femtosecond lasers with both high energy and short pulse duration. It is believed that it could develop femtosecond lasers at the 10-mJ level with average power exceeding 100 W and sub-200 fs pulse duration.
- 23 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1255-1258
High-performance Yb:CaYAlO 4 dual-crystal regenerative amplifier at 5 and 50 kHz repetition frequency
The Yb:CaYAlO 4 (Yb:CALYO) crystal, which boasts a very broad emission spectrum and moderate thermal conductivity, is highly promising for the generation of high-power femtosecond lasers with short pulse durations. However, research into Yb:CALYO-based high-power femtosecond amplifiers has been limited. Here, we report on a Yb:CALYO-based dual-crystal regenerative amplifier capable of delivering high average power and high pulse energy. The maximum single-pulse energy of 6.5 mJ was achieved at a 5-kHz repetition rate, corresponding to an average power of 32.5 W. Additionally, the maximum average power of 65.2 W was achieved at a 50-kHz repetition rate, corresponding to a single-pulse energy of 1.3 mJ. In both instances, the pulse durations were shorter than 200 fs, accompanied by good power stability. To the best of our knowledge, these results represent the highest average power and pulse energy ever achieved from a Yb:CALYO-based femtosecond amplifier, indicating that Yb:CALYO is an excellent candidate for high-power femtosecond lasers with both high energy and short pulse duration. It is believed that it could develop femtosecond lasers at the 10-mJ level with average power exceeding 100 W and sub-200 fs pulse duration.
- Open Access
- 16 February 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-20
Power scaling of a fundamental-mode thin-disk laser using a gain-enhanced soft-aperture resonator
We present a novel, compact resonator design for large-mode thin-disk lasers, producing 300 W average output power at a 1-kHz repetition rate within a cavity length of less than 5 m. High beam quality with M 2 x = 1.06 and M 2 y = 1.15 is achieved by breaking conventional mode-matching ratios and fully exploiting the disk’s soft-aperture effect. In this work, an ytterbium-doped yttrium aluminum garnet thin-disk resonator is shown to produce fundamental transverse mode lasing with a mode size approaching or surpassing the pump spot dimension. Theoretical analysis demonstrates that the proposed cavity configuration enables a thin-disk regenerative amplifier to deliver pulse energy exceeding 200 mJ at 1 kHz repetition rate with excellent beam quality.
- 16 February 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-20
Open AccessPower scaling of a fundamental-mode thin-disk laser using a gain-enhanced soft-aperture resonator
We present a novel, compact resonator design for large-mode thin-disk lasers, producing 300 W average output power at a 1-kHz repetition rate within a cavity length of less than 5 m. High beam quality with M 2 x = 1.06 and M 2 y = 1.15 is achieved by breaking conventional mode-matching ratios and fully exploiting the disk’s soft-aperture effect. In this work, an ytterbium-doped yttrium aluminum garnet thin-disk resonator is shown to produce fundamental transverse mode lasing with a mode size approaching or surpassing the pump spot dimension. Theoretical analysis demonstrates that the proposed cavity configuration enables a thin-disk regenerative amplifier to deliver pulse energy exceeding 200 mJ at 1 kHz repetition rate with excellent beam quality.
- 8 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 52852-52859
12.7 mJ travelling-wave amplifier based on Yb:CALGO crystals at 1 kHz
In this paper, we demonstrate, for what we believe is the first time, a quasi-continuous-wave (QCW), one kilohertz, two-stage, double-pass travelling-wave amplifier based on Yb:CALGO crystals. A compact travelling-wave amplifier delivered an amplified pulse energy of 12.7 mJ at the central wavelength of 1038.1 nm. The amplified spectrum featured a full width at half maximum (FWHM) of 5.8 nm. Using a double-pass single-grating compressor, a pulse duration of 281 fs was measured. Owing to effective thermal management, the amplified laser beam profile exhibited a well-defined Gaussian distribution with a beam ellipticity of 0.92, corresponding to a beam quality factor (M 2 ) < 1.30 in each stage.
- 8 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 52852-52859
12.7 mJ travelling-wave amplifier based on Yb:CALGO crystals at 1 kHz
In this paper, we demonstrate, for what we believe is the first time, a quasi-continuous-wave (QCW), one kilohertz, two-stage, double-pass travelling-wave amplifier based on Yb:CALGO crystals. A compact travelling-wave amplifier delivered an amplified pulse energy of 12.7 mJ at the central wavelength of 1038.1 nm. The amplified spectrum featured a full width at half maximum (FWHM) of 5.8 nm. Using a double-pass single-grating compressor, a pulse duration of 281 fs was measured. Owing to effective thermal management, the amplified laser beam profile exhibited a well-defined Gaussian distribution with a beam ellipticity of 0.92, corresponding to a beam quality factor (M 2 ) < 1.30 in each stage.
- 1 December 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7420-7423
Generation of gigahertz-repetition-rate femtosecond vortex beams by an optical parametric oscillator
The generation of GHz-repetition-rate femtosecond vortex beams is reported for the first time, to the best of our knowledge. A self-developed GHz-repetition-rate Kerr-lens mode-locked Yb:CYA laser was used to pump an optical parametric oscillator (OPO). Hermite–Gaussian (HG) beams with tunable orders from the 1st to the 7th were generated in the OPO and subsequently converted into vortex beams of the corresponding orders outside the cavity. The generated vortex beams exhibit a repetition rate of 1.02 GHz, a wavelength tuning range spanning 1.47–1.66 μm, and a pulse duration ranging from ~100 fs to ~200 fs. This work provides a flexible and reliable approach for generating GHz-repetition-rate femtosecond vortex beams and offers a high-performance optical source for relevant applications.
- 1 December 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7420-7423
Generation of gigahertz-repetition-rate femtosecond vortex beams by an optical parametric oscillator
The generation of GHz-repetition-rate femtosecond vortex beams is reported for the first time, to the best of our knowledge. A self-developed GHz-repetition-rate Kerr-lens mode-locked Yb:CYA laser was used to pump an optical parametric oscillator (OPO). Hermite–Gaussian (HG) beams with tunable orders from the 1st to the 7th were generated in the OPO and subsequently converted into vortex beams of the corresponding orders outside the cavity. The generated vortex beams exhibit a repetition rate of 1.02 GHz, a wavelength tuning range spanning 1.47–1.66 μm, and a pulse duration ranging from ~100 fs to ~200 fs. This work provides a flexible and reliable approach for generating GHz-repetition-rate femtosecond vortex beams and offers a high-performance optical source for relevant applications.
- Open Access
Research on Nanosecond High-Pulse-Energy Regenerative Amplifier with Adjustable Pulse Duration and Third Harmonic Generation
We reported on a nanosecond regenerative amplified laser with a repetition rate of 1 kHz by employing laser diodes (LDs) with distinct wavelengths as both the seed laser and the pump source and utilizing Nd:YAG as the gain medium. The single-pulse energy was 1.58 mJ and the pulse duration was adjustable, ranging from 1 to 5 ns. Combining two oppositely oriented BBO crystals for second harmonic generation (SHG) and an LBO crystal for third harmonic generation (THG), a 355 nm laser with a single-pulse energy of 257 μJ was attained, corresponding to a THG efficiency of 16.2%.
Open AccessResearch on Nanosecond High-Pulse-Energy Regenerative Amplifier with Adjustable Pulse Duration and Third Harmonic Generation
We reported on a nanosecond regenerative amplified laser with a repetition rate of 1 kHz by employing laser diodes (LDs) with distinct wavelengths as both the seed laser and the pump source and utilizing Nd:YAG as the gain medium. The single-pulse energy was 1.58 mJ and the pulse duration was adjustable, ranging from 1 to 5 ns. Combining two oppositely oriented BBO crystals for second harmonic generation (SHG) and an LBO crystal for third harmonic generation (THG), a 355 nm laser with a single-pulse energy of 257 μJ was attained, corresponding to a THG efficiency of 16.2%.
- 1 April 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (7) , 2453
Watt-level multi-gigahertz-repetition-rate femtosecond optical parametric oscillator
A watt-level multi-gigahertz (GHz) repetition-rate femtosecond optical parametric oscillator (OPO) synchronously pumped by a GHz-repetition-rate Kerr-lens mode-locked Yb:CYA laser is demonstrated in this letter. The output signal had a wavelength tuning range from 1.41 to 1.64 μm, a maximum average power of 1.58 W, a minimum pulse duration of 139 fs, and a repetition rate of 1 GHz, while the mid-infrared idler had a wavelength tuning range from 2.8 to 4.0 μm, a maximum average power of 1 W, a minimum pulse duration of 103 fs, and a repetition rate of 1 GHz. Through increasing the cavity length of the OPO by a unit fraction of the cavity length of the pump source, the output signal with repetition rates of 2, 3, and 4 GHz was obtained, respectively, and the output power of each was above 1 W. This work represents the highest, to the best of our knowledge, power of GHz femtosecond OPOs.
- 1 April 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (7) , 2453
Watt-level multi-gigahertz-repetition-rate femtosecond optical parametric oscillator
A watt-level multi-gigahertz (GHz) repetition-rate femtosecond optical parametric oscillator (OPO) synchronously pumped by a GHz-repetition-rate Kerr-lens mode-locked Yb:CYA laser is demonstrated in this letter. The output signal had a wavelength tuning range from 1.41 to 1.64 μm, a maximum average power of 1.58 W, a minimum pulse duration of 139 fs, and a repetition rate of 1 GHz, while the mid-infrared idler had a wavelength tuning range from 2.8 to 4.0 μm, a maximum average power of 1 W, a minimum pulse duration of 103 fs, and a repetition rate of 1 GHz. Through increasing the cavity length of the OPO by a unit fraction of the cavity length of the pump source, the output signal with repetition rates of 2, 3, and 4 GHz was obtained, respectively, and the output power of each was above 1 W. This work represents the highest, to the best of our knowledge, power of GHz femtosecond OPOs.
- 6 December 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (24) , 7024-7027
Kerr-lens mode-locked GHz-repetition-rate Yb:CYA laser with 11-W average power
We demonstrate on a high-power 1-GHz Kerr-lens mode-locked (KLM) ytterbium (Yb):CYA laser delivering 149-fs pulses with an average power of 11.1 W. The corresponding single-pulse energy and peak power are 10.3 nJ and 60.8 kW, respectively. The mode-locking operation can be consistently sustained with root mean square (RMS) values of power fluctuations of only 0.52% for 100 min. To the best of our knowledge, this is the highest average power ever reported from a GHz femtosecond mode-locked oscillator.
- 6 December 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (24) , 7024-7027
Kerr-lens mode-locked GHz-repetition-rate Yb:CYA laser with 11-W average power
We demonstrate on a high-power 1-GHz Kerr-lens mode-locked (KLM) ytterbium (Yb):CYA laser delivering 149-fs pulses with an average power of 11.1 W. The corresponding single-pulse energy and peak power are 10.3 nJ and 60.8 kW, respectively. The mode-locking operation can be consistently sustained with root mean square (RMS) values of power fluctuations of only 0.52% for 100 min. To the best of our knowledge, this is the highest average power ever reported from a GHz femtosecond mode-locked oscillator.
- Open Access
- 15 November 2024
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 12, e66
Diode-pumped high-power gigahertz Kerr-lens mode-locked solid-state oscillator enabled by a dual-confocal ring cavity
Femtosecond oscillators with gigahertz (GHz) repetition rate are appealing sources for spectroscopic applications benefiting from the individually accessible and high-power comb line. The mode mismatch between the potent pump laser diode (LD) and the incredibly small laser cavity, however, limits the average output power of existing GHz Kerr-lens mode-locked (KLM) oscillators to tens of milliwatts. Here, we present a novel method that solves the difficulty and permits high average power LD-pumped KLM oscillators at GHz repetition rate. We propose a numerical simulation method to guide the realization of Kerr-lens mode-locking and comprehend the dynamics of the Kerr-lens mode-locking process. As a proof-of-principle demonstration, an LD-pumped Yb:KGW oscillator with up to 6.17-W average power and 184-fs pulse duration at 1.6-GHz repetition rate is conducted. The simulation had a good agreement with the experimental results. The cost-effective, compact and powerful laser source opens up new possibilities for research and industrial applications.
- 15 November 2024
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 12, e66
Open AccessDiode-pumped high-power gigahertz Kerr-lens mode-locked solid-state oscillator enabled by a dual-confocal ring cavity
Femtosecond oscillators with gigahertz (GHz) repetition rate are appealing sources for spectroscopic applications benefiting from the individually accessible and high-power comb line. The mode mismatch between the potent pump laser diode (LD) and the incredibly small laser cavity, however, limits the average output power of existing GHz Kerr-lens mode-locked (KLM) oscillators to tens of milliwatts. Here, we present a novel method that solves the difficulty and permits high average power LD-pumped KLM oscillators at GHz repetition rate. We propose a numerical simulation method to guide the realization of Kerr-lens mode-locking and comprehend the dynamics of the Kerr-lens mode-locking process. As a proof-of-principle demonstration, an LD-pumped Yb:KGW oscillator with up to 6.17-W average power and 184-fs pulse duration at 1.6-GHz repetition rate is conducted. The simulation had a good agreement with the experimental results. The cost-effective, compact and powerful laser source opens up new possibilities for research and industrial applications.