Neil Rostand
Research Subjects
Neil Rostand has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Marc Gaillardin
CEA, DAM, CEA-Gramat, Gramat, France
4 shared publications Olivier Duhamel
CEA DAM DIF
4 shared publications- Damien Lambert
CEA/CESTA
3 shared publications - Melanie Raine
CEA, DAM, DIF, Arpajon, France
3 shared publications C. Marcandella
CEA, DAM, DIF, Arpajon, France
2 shared publicationsChristophe Delbos
CEA, DAM, CEG, F-46500 Gramat, France
2 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (9) , 3679-3688
Bayesian Statistical Method for Quantifying the Uncertainty on the Measurement of Single Event Effects
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (9) , 3679-3688
Bayesian Statistical Method for Quantifying the Uncertainty on the Measurement of Single Event Effects
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Modélisation compacte de l'effet des radiations naturelles des dispositifs sub-28nm pour des applications automobiles et aéronautiques
L’objectif de cette thèse était le développement de modèles SET (Single Event Transient) et TID (Total Ionizing Dose) pour les MOSFETs de technologies fortement intégrées, reposant notamment sur la technologie SOI. Ces modèles devaient respecter les standards de la modélisation compacte afin d’assurer leur utilisation dans les simulateurs de circuits SPICE (ELDO, SPECTRE, PSPICE …) tout en assurant la justesse du contenu physique. Le langage d’implémentation est alors le Verilog-A. En 1A, l’investigation physique des SET a été effectuée à l’aide de simulations TCAD. Cette tâche a supporté le développement d’un premier modèle physique SET (validé par la TCAD) adapté aux technologies BULK.En 2A, le modèle physique a été rendu compact et implémenté en Verilog-A. Ce travail a nécessité le développement d’une méthode d’implémentation faisant appel à la considération d’un circuit électrique équivalent au phénomène SET. Le modèle ainsi implémenté en SPICE a été capable de prédire l’occurrence de SEUs (Single Event Upset) dans les mémoires et des erreurs plus fonctionnelles dans les registres à décalage. En parallèle, l’investigation physique du TID a été effectuée à l’aide simulations TCAD. Par ailleurs, les effets TID ont été modélisés et implémentés dans le modèle standard compact LETI – UTSOI décrivant le fonctionnement des transistors FDSOI. Le modèle a été validé à l’aide de simulations TCAD et a été utilisé pour extraire les paramètres TID sur des MOSFETs FDSOI irradiés au CEA/DAM.En 3A, un modèle compact SET pour technologies fortement intégrées (reposant sur la technologie SOI) a été développé. Ce modèle prend en compte l’amplification bipolaire inhérente à ce type de structure ainsi que la morphologie 3D de la charge générée par la particule ionisante. Des validations TCAD de ce modèle ont été effectuées. Par ailleurs, ce modèle SET a été interfacé avec le simulateur multi-physiques MUSCA SEP3 afin d’estimer le risque SEE sur des matrices mémoires FDSOI. L’apport du modèle SET a été mis en évidence dans la fiabilité de cette estimation.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Modélisation compacte de l'effet des radiations naturelles des dispositifs sub-28nm pour des applications automobiles et aéronautiques
L’objectif de cette thèse était le développement de modèles SET (Single Event Transient) et TID (Total Ionizing Dose) pour les MOSFETs de technologies fortement intégrées, reposant notamment sur la technologie SOI. Ces modèles devaient respecter les standards de la modélisation compacte afin d’assurer leur utilisation dans les simulateurs de circuits SPICE (ELDO, SPECTRE, PSPICE …) tout en assurant la justesse du contenu physique. Le langage d’implémentation est alors le Verilog-A. En 1A, l’investigation physique des SET a été effectuée à l’aide de simulations TCAD. Cette tâche a supporté le développement d’un premier modèle physique SET (validé par la TCAD) adapté aux technologies BULK.En 2A, le modèle physique a été rendu compact et implémenté en Verilog-A. Ce travail a nécessité le développement d’une méthode d’implémentation faisant appel à la considération d’un circuit électrique équivalent au phénomène SET. Le modèle ainsi implémenté en SPICE a été capable de prédire l’occurrence de SEUs (Single Event Upset) dans les mémoires et des erreurs plus fonctionnelles dans les registres à décalage. En parallèle, l’investigation physique du TID a été effectuée à l’aide simulations TCAD. Par ailleurs, les effets TID ont été modélisés et implémentés dans le modèle standard compact LETI – UTSOI décrivant le fonctionnement des transistors FDSOI. Le modèle a été validé à l’aide de simulations TCAD et a été utilisé pour extraire les paramètres TID sur des MOSFETs FDSOI irradiés au CEA/DAM.En 3A, un modèle compact SET pour technologies fortement intégrées (reposant sur la technologie SOI) a été développé. Ce modèle prend en compte l’amplification bipolaire inhérente à ce type de structure ainsi que la morphologie 3D de la charge générée par la particule ionisante. Des validations TCAD de ce modèle ont été effectuées. Par ailleurs, ce modèle SET a été interfacé avec le simulateur multi-physiques MUSCA SEP3 afin d’estimer le risque SEE sur des matrices mémoires FDSOI. L’apport du modèle SET a été mis en évidence dans la fiabilité de cette estimation.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1276-1284
Modeling of Doped Fully Depleted Behavior Induced by Total Ionizing Dose in Voltage Reference Circuits From a 65-nm Partially Depleted SOI Technology
In this paper, a doped FDSOI behavior for the 65 nm PDSOI technology is demonstrated in order to understand the output voltage shift of a voltage reference undergoing dose deposition in real time. From an in-depth top-bottom analysis, including both experiments and TCAD/SPICE simulations, we highlighted this unexpected doped FDSOI behavior. This study shows how it worsens the total ionizing dose effects due to the coupling effect between the front and back interfaces, not usual in this technology. A new threshold voltage model considering the channel doping and total ionizing dose is developed showing how doping concentration is an important hardening parameter. This model is reused, in a multiscale approach, to reproduce the output voltage shift of a voltage reference based on the PDSOI transistor degradation.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1276-1284
Modeling of Doped Fully Depleted Behavior Induced by Total Ionizing Dose in Voltage Reference Circuits From a 65-nm Partially Depleted SOI Technology
In this paper, a doped FDSOI behavior for the 65 nm PDSOI technology is demonstrated in order to understand the output voltage shift of a voltage reference undergoing dose deposition in real time. From an in-depth top-bottom analysis, including both experiments and TCAD/SPICE simulations, we highlighted this unexpected doped FDSOI behavior. This study shows how it worsens the total ionizing dose effects due to the coupling effect between the front and back interfaces, not usual in this technology. A new threshold voltage model considering the channel doping and total ionizing dose is developed showing how doping concentration is an important hardening parameter. This model is reused, in a multiscale approach, to reproduce the output voltage shift of a voltage reference based on the PDSOI transistor degradation.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (4) , 522-534
Single-Event Transient in Body-Contacted PDSOI Technology: Compact Modeling and Statistical Experimental Calibration
In this paper, a heavy ion induced Single Event Transient compact model is presented for Body Contacted PDSOI MOS transistor, which is interfaced with our Geant4 particle-matter interaction code. Cross comparisons with TCAD simulations are provided as well as some modeling adds-on to existing models, addressing the case of energy deposition in the source and drain and improving the body discharge description through the body contact. In previous works, the experimental calibration of existing compact models rarely relies on the transistor level collected charge distribution, measured during a heavy ions irradiation run. Still the collected charge is a key measurable quantity as its value strongly influences circuit level effects (like SEU in memories). Moreover, reproducing the collected charge distribution within an irradiation run through simulation is providing a proof that the stochastic nature of the experiment is correctly captured by the SET compact model. In this work, we expose an experimental statistical calibration procedure based on collected charges data obtained in GANIL.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (4) , 522-534
Single-Event Transient in Body-Contacted PDSOI Technology: Compact Modeling and Statistical Experimental Calibration
In this paper, a heavy ion induced Single Event Transient compact model is presented for Body Contacted PDSOI MOS transistor, which is interfaced with our Geant4 particle-matter interaction code. Cross comparisons with TCAD simulations are provided as well as some modeling adds-on to existing models, addressing the case of energy deposition in the source and drain and improving the body discharge description through the body contact. In previous works, the experimental calibration of existing compact models rarely relies on the transistor level collected charge distribution, measured during a heavy ions irradiation run. Still the collected charge is a key measurable quantity as its value strongly influences circuit level effects (like SEU in memories). Moreover, reproducing the collected charge distribution within an irradiation run through simulation is providing a proof that the stochastic nature of the experiment is correctly captured by the SET compact model. In this work, we expose an experimental statistical calibration procedure based on collected charges data obtained in GANIL.
- 21 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (5) , 991-1001
TID Effects Induced by ARACOR, 60Co, and ORIATRON Photon Sources in MOS Devices: Impact of Geometry and Materials
Total Ionizing Dose (TID) effects induced by different photon sources are studied in MOS devices. The Dose Factor (DF), defined as the ratio between dose deposition in dosimeter and actual dose deposition in MOS sensitive oxides, is estimated using Monte-Carlo simulations of energetic photons striking simple device structures. An effective TID approach is proposed to account for both the real ionizing dose depositions in small volumes and the charge yield. This method is applied to a Silicon-On-Insulator (SOI) technology using three photon sources: the usual ARACOR and 60Co sources, which deliver several tens of keV photons and 1.25 MeV photons respectively, and a third facility named ORIATRON, a 6 MeV electron linear accelerator that produces photons on a wide energy spectrum. This topic, investigated intensively in the literature a few decades ago, is revisited in the context of several evolutions including: new radiation sources, novel simulation tools and device scaling which all impact ionizing dose deposition in micro-sensitive volumes of current electronic technologies. Dedicated numerical simulations demonstrate the importance of taking into account the entire stack of materials in order to get the most accurate estimations of TID in the sensitive oxide. Descriptions of the Back-End-Of-Line (BEOL) layers (especially when the technology uses Copper), the polysilicon gate, the BOX (for SOI devices), but also of the substrate and package are mandatory in these simulations, since dose enhancement and/or backscattered photons can be a significant source of TID variation in the gate oxide. Also the package lid composition and its thickness can be major TID contributors. The results show that the use of a pre-filter with lead and aluminum can optimize ionizing dose deposition.
- 21 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (5) , 991-1001
TID Effects Induced by ARACOR, 60Co, and ORIATRON Photon Sources in MOS Devices: Impact of Geometry and Materials
Total Ionizing Dose (TID) effects induced by different photon sources are studied in MOS devices. The Dose Factor (DF), defined as the ratio between dose deposition in dosimeter and actual dose deposition in MOS sensitive oxides, is estimated using Monte-Carlo simulations of energetic photons striking simple device structures. An effective TID approach is proposed to account for both the real ionizing dose depositions in small volumes and the charge yield. This method is applied to a Silicon-On-Insulator (SOI) technology using three photon sources: the usual ARACOR and 60Co sources, which deliver several tens of keV photons and 1.25 MeV photons respectively, and a third facility named ORIATRON, a 6 MeV electron linear accelerator that produces photons on a wide energy spectrum. This topic, investigated intensively in the literature a few decades ago, is revisited in the context of several evolutions including: new radiation sources, novel simulation tools and device scaling which all impact ionizing dose deposition in micro-sensitive volumes of current electronic technologies. Dedicated numerical simulations demonstrate the importance of taking into account the entire stack of materials in order to get the most accurate estimations of TID in the sensitive oxide. Descriptions of the Back-End-Of-Line (BEOL) layers (especially when the technology uses Copper), the polysilicon gate, the BOX (for SOI devices), but also of the substrate and package are mandatory in these simulations, since dose enhancement and/or backscattered photons can be a significant source of TID variation in the gate oxide. Also the package lid composition and its thickness can be major TID contributors. The results show that the use of a pre-filter with lead and aluminum can optimize ionizing dose deposition.
- 12 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (5) , 928-936
Investigations on Spectral Photon Radiation Sources to Perform TID Experiments in Micro- and Nano-Electronic Devices
The TID sensitivity of mature and innovative technologies is investigated using both ionizing radiation experiments and Monte-Carlo simulations to discuss the potential of spectral photon radiation sources as an alternative for radiation effects studies. The impact of both technological and radiation test parameters on effective total ionizing dose deposition is also discussed. All the layers struck by the incident radiation flux before reaching the targeted sensitive oxide are the major contributors of final ionizing dose deposits, rather than the actual sensitive oxide itself.
- 12 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (5) , 928-936
Investigations on Spectral Photon Radiation Sources to Perform TID Experiments in Micro- and Nano-Electronic Devices
The TID sensitivity of mature and innovative technologies is investigated using both ionizing radiation experiments and Monte-Carlo simulations to discuss the potential of spectral photon radiation sources as an alternative for radiation effects studies. The impact of both technological and radiation test parameters on effective total ionizing dose deposition is also discussed. All the layers struck by the incident radiation flux before reaching the targeted sensitive oxide are the major contributors of final ionizing dose deposits, rather than the actual sensitive oxide itself.
- 16 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 66 (7) , 1628-1633
Total Ionizing Dose Effects in FDSOI Compact Model for IC Design
- 16 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 66 (7) , 1628-1633
Total Ionizing Dose Effects in FDSOI Compact Model for IC Design