Jing Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Chen has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Linling Wang
School of Environmental Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
12 shared publications John C. Crittenden
Brook Byers Institute for Sustainable Systems, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA 30332, United States
8 shared publicationsXiaohui Wu
Huazhong University of Science and Technology
8 shared publicationsYao Shi
Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of Environmental Science & Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, Hubei, 430074, China
8 shared publicationsHuijie Hou
School of Environmental Science and Engineering, Huazhong University of Science and Technology, 1037 Luoyu Road, Wuhan 430074, China
7 shared publicationsZezhou Zhao
Hubei Key Laboratory of Multi-media Pollution Cooperative Control in Yangtze Basin, School of Environmental Science & Engineering, Huazhong University of Science and Technology (HUST), 1037 Luoyu Road, Wuhan, Hubei, 430074, China
7 shared publications
Latest Publications
- 29 August 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (36) , 25935-25946
Achieving Polymerization-Oriented Phenolic Pollutant Capture and Minimized Metal Residue in the Permanganate/Polyferric Sulfate Process via a Synergistic Polymerization-Coagulation Strategy
Permanganate (KMnO4) is widely recognized as a green and efficient oxidant for water purification. During the oxidation of phenolic contaminants, however, soluble coupling products and Mn-containing species (e.g., MnOx colloids and dissolved Mn ions) may remain in the aqueous phase, increasing the burden of downstream separation. Herein, we demonstrate that commercial polyferric sulfate (PFS) can simultaneously serve as a KMnO4 activator and an in situ coagulant, establishing a one-step synergistic polymerization-coagulation strategy for efficient 4-chlorophenol (4-CP) removal with minimal soluble oligomers and leachable metal species. Mechanistic studies reveal that PFS forms a positively charged Fe-(hydr)oxide interface that facilitates KMnO4 activation via electrostatic interactions. Meanwhile, PFS serves as a solid scaffold that stabilizes the critical 4-chlorophenoxyl radical intermediate via bis(4-chlorocatecholato)iron(III) complex formation, thereby driving polymer chain growth. Leveraging its inherent coagulation property, PFS effectively captures organic polymers, increasing chemical oxygen demand (COD) removal from 35.4% to 56.2% within 10 min, while efficiently sequestering MnOx colloids and reducing residual Fe and Mn concentrations in the treated supernatant by 99.2% and 99.4%, respectively. This work addresses limitations of conventional KMnO4 oxidation through in situ polymerization-coagulation, offering a strategy for phenolic pollutant remediation with reduced soluble oligomer accumulation and metal residuals.
- 29 August 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (36) , 25935-25946
Achieving Polymerization-Oriented Phenolic Pollutant Capture and Minimized Metal Residue in the Permanganate/Polyferric Sulfate Process via a Synergistic Polymerization-Coagulation Strategy
Permanganate (KMnO4) is widely recognized as a green and efficient oxidant for water purification. During the oxidation of phenolic contaminants, however, soluble coupling products and Mn-containing species (e.g., MnOx colloids and dissolved Mn ions) may remain in the aqueous phase, increasing the burden of downstream separation. Herein, we demonstrate that commercial polyferric sulfate (PFS) can simultaneously serve as a KMnO4 activator and an in situ coagulant, establishing a one-step synergistic polymerization-coagulation strategy for efficient 4-chlorophenol (4-CP) removal with minimal soluble oligomers and leachable metal species. Mechanistic studies reveal that PFS forms a positively charged Fe-(hydr)oxide interface that facilitates KMnO4 activation via electrostatic interactions. Meanwhile, PFS serves as a solid scaffold that stabilizes the critical 4-chlorophenoxyl radical intermediate via bis(4-chlorocatecholato)iron(III) complex formation, thereby driving polymer chain growth. Leveraging its inherent coagulation property, PFS effectively captures organic polymers, increasing chemical oxygen demand (COD) removal from 35.4% to 56.2% within 10 min, while efficiently sequestering MnOx colloids and reducing residual Fe and Mn concentrations in the treated supernatant by 99.2% and 99.4%, respectively. This work addresses limitations of conventional KMnO4 oxidation through in situ polymerization-coagulation, offering a strategy for phenolic pollutant remediation with reduced soluble oligomer accumulation and metal residuals.
- 20 November 2025
- Published by Elsevier in Environmental Research
- Vol. 289, 123338
Long-term stabilization of realgar tailings via enhancing mineralogical transformation with microwave and FeSO4 treatment
- 20 November 2025
- Published by Elsevier in Environmental Research
- Vol. 289, 123338
Long-term stabilization of realgar tailings via enhancing mineralogical transformation with microwave and FeSO4 treatment
- 19 August 2025
- Published by Elsevier in Environmental Research
- Vol. 285 (Pt 5) , 122636
The adsorption route and stabilization mechanism of Cd and Pb in soil from Pb-Zn smelter using ferrous sulfide coated with alginate
- 19 August 2025
- Published by Elsevier in Environmental Research
- Vol. 285 (Pt 5) , 122636
The adsorption route and stabilization mechanism of Cd and Pb in soil from Pb-Zn smelter using ferrous sulfide coated with alginate
- 18 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (28) , 14153-14161
Calcite-Induced Epitaxial Crystallization of Ca Arsenite Enhances As(III) Stability
Calcite plays a significant role in regulating As speciation in natural and engineering systems. However, known processes, including surface adsorption and probable structural incorporation, likely underestimate the effect of calcite-induced surface reactions on the As fate. This study reveals the epitaxial crystallization of calcium arsenite (CaHAsO3) on calcite surfaces, which is responsible for the enhanced As(III) stability caused by calcite during lime interaction with As(III). SEM images showed that Ca arsenite grew in a "standing" geometry on the calcite (104) face and appeared in order as micrometer-sized, well-crystallized platy crystals, rather than poorly crystallized nanosheets formed in the absence of calcite. The higher crystallinity/order and larger size of the epitaxial Ca arsenite led to its lower As(III) solubility. By electron diffraction analyses, lattice matching between calcite and Ca arsenite was evidenced. Despite the lack of Ca arsenite's crystallographic data, the epitaxial relationship was determined as (hkl)d=3.05Å// (104)calcite; [uvw]Ca-As-Ca PBC// [-441]calcite, where PBC stands for periodic bond chain. In contrast, no epitaxial crystallization of Ca arsenate minerals was observed on calcite surfaces; thus, the presence of calcite had little effect on As(V) stability. Our findings improve the understanding of calcite's role in affecting As speciation and broaden the application of calcite-containing materials in environmental remediation.
- 18 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (28) , 14153-14161
Calcite-Induced Epitaxial Crystallization of Ca Arsenite Enhances As(III) Stability
Calcite plays a significant role in regulating As speciation in natural and engineering systems. However, known processes, including surface adsorption and probable structural incorporation, likely underestimate the effect of calcite-induced surface reactions on the As fate. This study reveals the epitaxial crystallization of calcium arsenite (CaHAsO3) on calcite surfaces, which is responsible for the enhanced As(III) stability caused by calcite during lime interaction with As(III). SEM images showed that Ca arsenite grew in a "standing" geometry on the calcite (104) face and appeared in order as micrometer-sized, well-crystallized platy crystals, rather than poorly crystallized nanosheets formed in the absence of calcite. The higher crystallinity/order and larger size of the epitaxial Ca arsenite led to its lower As(III) solubility. By electron diffraction analyses, lattice matching between calcite and Ca arsenite was evidenced. Despite the lack of Ca arsenite's crystallographic data, the epitaxial relationship was determined as (hkl)d=3.05Å// (104)calcite; [uvw]Ca-As-Ca PBC// [-441]calcite, where PBC stands for periodic bond chain. In contrast, no epitaxial crystallization of Ca arsenate minerals was observed on calcite surfaces; thus, the presence of calcite had little effect on As(V) stability. Our findings improve the understanding of calcite's role in affecting As speciation and broaden the application of calcite-containing materials in environmental remediation.
- 17 June 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (25) , 12667-12678
Pore-Size-Dependent Kinetics and Product Distribution of Fe(II)-Catalyzed Ferrihydrite Transformation
Fe(II)-catalyzed ferrihydrite (Fh) transformation is a widely occurring biogeochemical process in the porous media of anaerobic soils and sediments, but how pore-scale spaces affect the kinetics and product distribution of Fh transformation remains poorly understood. This study investigated the transformation of Fh nanoparticle film across a continuum of sizes of pore-scale spaces created by pressing a glass bead onto the film and immersing in 2 mM and 10 mM FeSO4 at pH = 7.0. While lepidocrocite (Lp) dominated over goethite (Gt) on the static Fh film, both minerals were observed to preferentially precipitate in micropore regions adjacent to the Fh film-glass bead contact area. The natural logarithm of product formation rates decreased linearly as increasing pore height (h) from 5 to 600 μm, revealing pronounced kinetic inhibition in macropore regions. Product mineral particles in smaller pore regions exhibited reduced primary particle size (146.1 ± 57.6 nm at h = 0.11 μm) compared with those in larger pores (222.5 ± 61.8 nm at h = 561.84 μm). COMSOL-based reaction-diffusion modeling shows that rapid Fe(III)labile intermediate supply from Fe(II)-catalyzed Fh dissolution drives its localized accumulation and elevated supersaturation within confined micropores, which ultimately dictates the pore-size-dependent distribution, formation kinetics, and primary particle size of the resulting product minerals. These findings provide mechanistic insights into the dominant role of intermediate precursor supply in dictating confinement-regulated phase transformation and highlight the notable effects of micropore size on Fh transformation and element cycling in natural porous media.
- 17 June 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (25) , 12667-12678
Pore-Size-Dependent Kinetics and Product Distribution of Fe(II)-Catalyzed Ferrihydrite Transformation
Fe(II)-catalyzed ferrihydrite (Fh) transformation is a widely occurring biogeochemical process in the porous media of anaerobic soils and sediments, but how pore-scale spaces affect the kinetics and product distribution of Fh transformation remains poorly understood. This study investigated the transformation of Fh nanoparticle film across a continuum of sizes of pore-scale spaces created by pressing a glass bead onto the film and immersing in 2 mM and 10 mM FeSO4 at pH = 7.0. While lepidocrocite (Lp) dominated over goethite (Gt) on the static Fh film, both minerals were observed to preferentially precipitate in micropore regions adjacent to the Fh film-glass bead contact area. The natural logarithm of product formation rates decreased linearly as increasing pore height (h) from 5 to 600 μm, revealing pronounced kinetic inhibition in macropore regions. Product mineral particles in smaller pore regions exhibited reduced primary particle size (146.1 ± 57.6 nm at h = 0.11 μm) compared with those in larger pores (222.5 ± 61.8 nm at h = 561.84 μm). COMSOL-based reaction-diffusion modeling shows that rapid Fe(III)labile intermediate supply from Fe(II)-catalyzed Fh dissolution drives its localized accumulation and elevated supersaturation within confined micropores, which ultimately dictates the pore-size-dependent distribution, formation kinetics, and primary particle size of the resulting product minerals. These findings provide mechanistic insights into the dominant role of intermediate precursor supply in dictating confinement-regulated phase transformation and highlight the notable effects of micropore size on Fh transformation and element cycling in natural porous media.
- 27 June 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (27) , 12123-12134
Enhanced Arsenate Immobilization by Kaolinite via Heterogeneous Pathways during Ferrous Iron Oxidation
Clay minerals are ubiquitous in subsurface environments and have long been recognized as having a limited or negligible impact on the fate of arsenic (As) due to their negatively charged surfaces. Here, we demonstrate the significant role of kaolinite (Kln), a pervasive clay mineral, in enhancing As(V) immobilization during ferrous iron (Fe(II)) oxidation at near-neutral pH. Our results showed that Fe(II) oxidation alone was not capable of immobilizing As(V) at relatively low Fe/As molar ratios (≤2) due to the generation of Fe(III)-As(V) nanocolloids that could still migrate easily as truly dissolved As did. In the presence of kaolinite, dissolved As(V) was significantly immobilized on the kaolinite surfaces via forming Kln-Fe(III)-As(V) ternary precipitates, which had large sizes (at micrometer levels) to reduce the As mobility. The kaolinite-induced heterogeneous pathways for As(V) immobilization involved Fe(II) adsorption, heterogeneous oxidation of adsorbed Fe(II), and finally heterogeneous nucleation/precipitation of Fe(III)-As(V) phases on the edge surfaces of kaolinite. The surface precipitates were mixtures of amorphous basic Fe(III)-arsenate and As-rich hydrous ferric oxide. Our findings provide new insights into the role of clay minerals in As transformation, which is significant for the fate of As in natural and engineered systems.
- 27 June 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (27) , 12123-12134
Enhanced Arsenate Immobilization by Kaolinite via Heterogeneous Pathways during Ferrous Iron Oxidation
Clay minerals are ubiquitous in subsurface environments and have long been recognized as having a limited or negligible impact on the fate of arsenic (As) due to their negatively charged surfaces. Here, we demonstrate the significant role of kaolinite (Kln), a pervasive clay mineral, in enhancing As(V) immobilization during ferrous iron (Fe(II)) oxidation at near-neutral pH. Our results showed that Fe(II) oxidation alone was not capable of immobilizing As(V) at relatively low Fe/As molar ratios (≤2) due to the generation of Fe(III)-As(V) nanocolloids that could still migrate easily as truly dissolved As did. In the presence of kaolinite, dissolved As(V) was significantly immobilized on the kaolinite surfaces via forming Kln-Fe(III)-As(V) ternary precipitates, which had large sizes (at micrometer levels) to reduce the As mobility. The kaolinite-induced heterogeneous pathways for As(V) immobilization involved Fe(II) adsorption, heterogeneous oxidation of adsorbed Fe(II), and finally heterogeneous nucleation/precipitation of Fe(III)-As(V) phases on the edge surfaces of kaolinite. The surface precipitates were mixtures of amorphous basic Fe(III)-arsenate and As-rich hydrous ferric oxide. Our findings provide new insights into the role of clay minerals in As transformation, which is significant for the fate of As in natural and engineered systems.
- 11 March 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 486
Long-term stabilization of arsenic-alkali residues via adjusting As redistribution and mineralogical transformation
- 11 March 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 486
Long-term stabilization of arsenic-alkali residues via adjusting As redistribution and mineralogical transformation
- 18 April 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (23) , 64565-64575
Evaluation on leachability of heavy metals from tailings: risk factor identification and cumulative influence
The leachability of heavy metals (HMs) in tailings is significantly affected by multivariate factors associated with environmental conditions. However, the leaching patterns of HMs in molybdenum (Mo) tailings due to environmental change and cumulative influences of multi-leaching factors remain unclear. The leaching behaviors of HMs in Mo tailings were studied through static leaching tests. The key leaching factors were discussed via simulating acid rain leaching scenario in terms of global and local environmental conditions. The potential risk factors were identified, and their cumulative influences on the leachability of HMs were evaluated with boosted regression trees (BRT) and generalized additive model (GAM) analyses. Environmental factors showed interactive effects on the leachability of HMs in tailings. The leachability of HMs in tailings decreased significantly with the interaction of increasing liquid/solid (L/S) ratio and pH. Rebound of leachability was observed with high L/S ratio (> 60) and long-time leaching (> 30 h). L/S ratio and pH were the most sensitive factors to the leachability of HMs with the corresponding contribution of 40.8% and 27.1%, respectively, followed by leaching time and temperature (~ 16%). The total contribution of global climate-associated factors, i.e., L/S ratio, leaching time, and temperature to the leachability of HMs was up to 70%, while leachate pH shared the other 30%. With the increase of persistent heavy rain in summer globally, As and Cd were found to having higher leaching risks than the other HMs in tailings, although an obvious decrease in their leachability was obtained due to the improvement of acid rain pollution in China. The study provides a valuable method for the identification of potential risk factors and their associations with the leaching behaviors of HMs in tailings under the background of obvious improvement on acid rain pollution in China and global climate change.
- 18 April 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (23) , 64565-64575
Evaluation on leachability of heavy metals from tailings: risk factor identification and cumulative influence
The leachability of heavy metals (HMs) in tailings is significantly affected by multivariate factors associated with environmental conditions. However, the leaching patterns of HMs in molybdenum (Mo) tailings due to environmental change and cumulative influences of multi-leaching factors remain unclear. The leaching behaviors of HMs in Mo tailings were studied through static leaching tests. The key leaching factors were discussed via simulating acid rain leaching scenario in terms of global and local environmental conditions. The potential risk factors were identified, and their cumulative influences on the leachability of HMs were evaluated with boosted regression trees (BRT) and generalized additive model (GAM) analyses. Environmental factors showed interactive effects on the leachability of HMs in tailings. The leachability of HMs in tailings decreased significantly with the interaction of increasing liquid/solid (L/S) ratio and pH. Rebound of leachability was observed with high L/S ratio (> 60) and long-time leaching (> 30 h). L/S ratio and pH were the most sensitive factors to the leachability of HMs with the corresponding contribution of 40.8% and 27.1%, respectively, followed by leaching time and temperature (~ 16%). The total contribution of global climate-associated factors, i.e., L/S ratio, leaching time, and temperature to the leachability of HMs was up to 70%, while leachate pH shared the other 30%. With the increase of persistent heavy rain in summer globally, As and Cd were found to having higher leaching risks than the other HMs in tailings, although an obvious decrease in their leachability was obtained due to the improvement of acid rain pollution in China. The study provides a valuable method for the identification of potential risk factors and their associations with the leaching behaviors of HMs in tailings under the background of obvious improvement on acid rain pollution in China and global climate change.