Mabel Moreno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mabel Moreno has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Luis Velasquez
Instituto de Investigación Interdisciplinar en Ciencias Biomédicas SEK (I3CBSEK) Facultad Ciencias de la Salud Universidad SEK Fernando Manterola 0789 Providencia 7520317 Santiago Chile
4 shared publications- Anjana Devi
Leibniz Institute for Solid State and Materials Research
3 shared publications - Daniel Navas
Instituto de Ciencias Naturales Facultad de Medicina Veterinaria y Agronomía Universidad de Las Américas Sede Providencia, Avenida Manuel Montt 948 Santiago 7500975 Chile
3 shared publications - Guillermo González
Facultad de Ciencias Departamento de Química Universidad de Chile Las Palmeras 3425 Nuñoa 7750000 Santiago Chile
3 shared publications Paula Solar
Departamento De Ciencias Biológicas y Químicas Facultad De Ciencias Universidad San Sebastián Santiago Chile
3 shared publicationsRuairi McGlynn
Ulster University Belfast UK
3 shared publications
Latest Publications
- Open Access
- 17 June 2026
- Published by Wiley in Advanced Healthcare Materials
- Vol. 15 (26) , e71329
Atomic Layer Deposition Processes: Versatile Platforms for Engineering ZnO‐Chitosan Biointerfaces
This study explores zinc‐functionalized chitosan (CS) for engineering bio‐multifunctional interfaces via three atomic‐scale techniques: vapor phase metalation (VPM), multiple pulsed vapor phase infiltration (MPI), and O2 plasma‐enhanced atomic layer deposition (PEALD). X‐ray photoelectron spectroscopy (XPS) analysis and scanning electron microscopy (SEM) with integrated energy‐dispersive X‐ray (EDX) elemental mapping confirmed homogeneous Zn distribution in all regimes, while AFM revealed a topographical transition from planarization in VPM (Rq = 5.6 nm) to high‐surface‐area nucleation in MPI (Rq = 123.9 nm). X‐ray diffraction (XRD) analysis demonstrated structural reconfiguration, with VPM reducing the hydrated phase crystallite size (7.4 to 4.6 nm) and MPI achieving the finest nanocrystallinity (1.83 nm). Notably, PEALD‐modified interfaces exhibited the highest interfacial energy (0.102 J/m 2 ) and enhanced swelling. Physicochemical characterization showed the functionalization method dictates semiconductor properties, while biological assays revealed C2C12 cell proliferation comparable to the control, along with tailored antiseptic activity against E. coli and H. pylori . Significantly, in vivo subcutaneous implantation revealed that CS‐ZnO PEALD scaffolds act as immunomodulatory interfaces, promoting active angiogenesis and a balanced immune response with stable anti‐inflammatory IL‐10 levels and near‐basal pro‐inflammatory expression (IL‐6 = 0.5 pg/mL). These findings highlight the versatility of ALD‐based processes for next‐generation intelligent medical implants and bio‐integrated electronics.
- 17 June 2026
- Published by Wiley in Advanced Healthcare Materials
- Vol. 15 (26) , e71329
Open AccessAtomic Layer Deposition Processes: Versatile Platforms for Engineering ZnO‐Chitosan Biointerfaces
This study explores zinc‐functionalized chitosan (CS) for engineering bio‐multifunctional interfaces via three atomic‐scale techniques: vapor phase metalation (VPM), multiple pulsed vapor phase infiltration (MPI), and O2 plasma‐enhanced atomic layer deposition (PEALD). X‐ray photoelectron spectroscopy (XPS) analysis and scanning electron microscopy (SEM) with integrated energy‐dispersive X‐ray (EDX) elemental mapping confirmed homogeneous Zn distribution in all regimes, while AFM revealed a topographical transition from planarization in VPM (Rq = 5.6 nm) to high‐surface‐area nucleation in MPI (Rq = 123.9 nm). X‐ray diffraction (XRD) analysis demonstrated structural reconfiguration, with VPM reducing the hydrated phase crystallite size (7.4 to 4.6 nm) and MPI achieving the finest nanocrystallinity (1.83 nm). Notably, PEALD‐modified interfaces exhibited the highest interfacial energy (0.102 J/m 2 ) and enhanced swelling. Physicochemical characterization showed the functionalization method dictates semiconductor properties, while biological assays revealed C2C12 cell proliferation comparable to the control, along with tailored antiseptic activity against E. coli and H. pylori . Significantly, in vivo subcutaneous implantation revealed that CS‐ZnO PEALD scaffolds act as immunomodulatory interfaces, promoting active angiogenesis and a balanced immune response with stable anti‐inflammatory IL‐10 levels and near‐basal pro‐inflammatory expression (IL‐6 = 0.5 pg/mL). These findings highlight the versatility of ALD‐based processes for next‐generation intelligent medical implants and bio‐integrated electronics.
- Open Access
- 7 March 2026
- Published by Elsevier in Applied Surface Science Advances
- Vol. 33
Ti-metalation of chitosan films by VPM, MPI and PEALD processes: An avenue to antiseptic scaffolds and functional biopolymers
- 7 March 2026
- Published by Elsevier in Applied Surface Science Advances
- Vol. 33
Open AccessTi-metalation of chitosan films by VPM, MPI and PEALD processes: An avenue to antiseptic scaffolds and functional biopolymers
- 21 January 2026
- Published by Wiley in Chemistry–Methods
- Vol. 6 (1)
Cover Feature: Metamorphosis of Multilayered‐(NH 4 ) 2 V 7 O 16 Squares to Zinc Vanadate and w‐ZnO Nanoparticles via Zinc Metalation through Atomic Layer Deposition: Precision and Sustainability in Material Transformation (Chem. Methods 1/2026)
- 21 January 2026
- Published by Wiley in Chemistry–Methods
- Vol. 6 (1)
Cover Feature: Metamorphosis of Multilayered‐(NH 4 ) 2 V 7 O 16 Squares to Zinc Vanadate and w‐ZnO Nanoparticles via Zinc Metalation through Atomic Layer Deposition: Precision and Sustainability in Material Transformation (Chem. Methods 1/2026)
- Open Access
- 21 January 2026
- Published by Springer Nature in Research Square
Vapour-Phase-Metalation Nanosurgery by ALD: A Tool for Single Molecular Replacement on Enterobactin for Drug Discovery and Nanomaterial Design
For the first time, the innovative vapour-phase metalation (VPM) process has been employed to functionalize soft materials such as Ferric Enterobactin (FeH x EB) and Enterobactin (H 6 EB) by linking ZnOH fragments, solely pulsing diethylzinc (DEZ). The samples were characterised through a suite of advanced techniques, including 1H and 13C 2D-HSQC nuclear magnetic resonance (NMR), infrared (IR) spectroscopy, UV-Vis spectroscopy, and MALDI-TOF mass spectrometry (MS). Groundbreaking density functional theory calculations successfully correlated the IR and NMR data, shedding light on the profound influence of the ZnOH fragments on the architectures of FeH 3 EB and H 6 EB. Moreover, insightful molecular dynamics and molecular docking studies were conducted to explore the affinity energy between the ZnOH-modified and non-modified siderophore and the ferric protein enterobactin receptor (FepA). Spectroscopic analyses not only confirmed the successful Zn-modification of FeH 3 EB and H 6 EB but also underscored the potential of the VPM process for attaching metals to soft materials. The docking results revealed a compelling interaction between the ZnOH-modified siderophore and FepA, boasting an affinity equal to or even surpassing that of their unmodified counterparts. This work positions VPM as a cornerstone technology for atomic-level molecular engineering, with transformative implications across healthcare, materials science, and environmental sustainability.
- 21 January 2026
- Published by Springer Nature in Research Square
Open AccessVapour-Phase-Metalation Nanosurgery by ALD: A Tool for Single Molecular Replacement on Enterobactin for Drug Discovery and Nanomaterial Design
For the first time, the innovative vapour-phase metalation (VPM) process has been employed to functionalize soft materials such as Ferric Enterobactin (FeH x EB) and Enterobactin (H 6 EB) by linking ZnOH fragments, solely pulsing diethylzinc (DEZ). The samples were characterised through a suite of advanced techniques, including 1H and 13C 2D-HSQC nuclear magnetic resonance (NMR), infrared (IR) spectroscopy, UV-Vis spectroscopy, and MALDI-TOF mass spectrometry (MS). Groundbreaking density functional theory calculations successfully correlated the IR and NMR data, shedding light on the profound influence of the ZnOH fragments on the architectures of FeH 3 EB and H 6 EB. Moreover, insightful molecular dynamics and molecular docking studies were conducted to explore the affinity energy between the ZnOH-modified and non-modified siderophore and the ferric protein enterobactin receptor (FepA). Spectroscopic analyses not only confirmed the successful Zn-modification of FeH 3 EB and H 6 EB but also underscored the potential of the VPM process for attaching metals to soft materials. The docking results revealed a compelling interaction between the ZnOH-modified siderophore and FepA, boasting an affinity equal to or even surpassing that of their unmodified counterparts. This work positions VPM as a cornerstone technology for atomic-level molecular engineering, with transformative implications across healthcare, materials science, and environmental sustainability.
- Top Cited PapersOpen Access
- 3 January 2026
- Published by MDPI AG in Pharmaceuticals
- Vol. 19 (1) , 93
Pharmacological Insights and Technological Innovations in Curcuma longa L. and Echinacea purpurea (L.) Moench as Plant-Derived Immunomodulators
Immune dysregulation and chronic inflammation are central contributors to many diseases. Curcuma longa L. and Echinacea purpurea (L.) Moench are widely used medicinal plants with extensive preclinical evidence supporting immunomodulatory effects. Their key metabolites, curcuminoids, turmerones, alkamides, polysaccharides, and caffeic acid derivatives, engage with critical pathways, including NF-κB, MAPK, JAK/STAT, and Nrf2. This interaction modulates cytokine production, oxidative stress responses, and both innate and adaptive immune activities. Although numerous mechanistic and early clinical studies support these actions, human evidence remains inconsistent, partly due to poor and variable oral bioavailability and substantial heterogeneity in extract composition, despite the existence of some standardized preparations. Recent technological strategies, including micelles, phytosomes, phospholipid complexes, nanoemulsions, polymeric nanoparticles, and liposomal systems, have improved solubility, stability, and systemic exposure of key metabolites, particularly curcuminoids. However, clinical results are still limited and often derived from small or heterogeneous trials. This review summarizes the ethnopharmacological background, mechanistic data, clinical findings, and formulation advances for both species and highlights the translational barriers that restrict their therapeutic application. Rigorous clinical studies using standardized and technologically optimized preparations are required to determine the true immunomodulatory potential of C. longa and E. purpurea.
- 3 January 2026
- Published by MDPI AG in Pharmaceuticals
- Vol. 19 (1) , 93
Top Cited PapersOpen AccessPharmacological Insights and Technological Innovations in Curcuma longa L. and Echinacea purpurea (L.) Moench as Plant-Derived Immunomodulators
Immune dysregulation and chronic inflammation are central contributors to many diseases. Curcuma longa L. and Echinacea purpurea (L.) Moench are widely used medicinal plants with extensive preclinical evidence supporting immunomodulatory effects. Their key metabolites, curcuminoids, turmerones, alkamides, polysaccharides, and caffeic acid derivatives, engage with critical pathways, including NF-κB, MAPK, JAK/STAT, and Nrf2. This interaction modulates cytokine production, oxidative stress responses, and both innate and adaptive immune activities. Although numerous mechanistic and early clinical studies support these actions, human evidence remains inconsistent, partly due to poor and variable oral bioavailability and substantial heterogeneity in extract composition, despite the existence of some standardized preparations. Recent technological strategies, including micelles, phytosomes, phospholipid complexes, nanoemulsions, polymeric nanoparticles, and liposomal systems, have improved solubility, stability, and systemic exposure of key metabolites, particularly curcuminoids. However, clinical results are still limited and often derived from small or heterogeneous trials. This review summarizes the ethnopharmacological background, mechanistic data, clinical findings, and formulation advances for both species and highlights the translational barriers that restrict their therapeutic application. Rigorous clinical studies using standardized and technologically optimized preparations are required to determine the true immunomodulatory potential of C. longa and E. purpurea.
- Open Access
- 17 November 2025
- Published by Wiley in Chemistry–Methods
- Vol. 6 (1)
Metamorphosis of Multilayered‐(NH 4 ) 2 V 7 O 16 Squares to Zinc Vanadate and w‐ZnO Nanoparticles via Zinc Metalation through Atomic Layer Deposition: Precision and Sustainability in Material Transformation
Vapor phase metalation (VPM) via atomic layer deposition is emerging as a sustainable, solvent‐free method for precise material functionalization. This study demonstrates selective zinc metalation of multilayered (NH 4 ) 2 V 7 O1 16 nanostructured squares using diethylzinc (DEZ) as a volatile precursor. A sequence of samples—(HDA)V 7 O 16 ·nH 2 O (S‐1), (NH 4 ) 2 V 7 O 16 ·nH 2 O (S‐2), iodine‐functionalized (S‐3), and Zn‐metalated (S‐4)—was characterised via XRD, HRTEM/SAED, FIB‐SEM, ESEM, ATR‐FTIR, Raman microscopy, and XPS. The V7 7 O 16 bilayer framework revealed a triclinic crystal structure (P‐1 space group) for the first time. VPM enabled the transformation into Zn 3 V3 3 O 8 and wurtzite ZnO nanoparticles with structural precision and minimal waste. Metalation was achieved from a single half‐cycle (210 seconds total), allowing fine control over deposition dynamics. This process also induced a magnetic transition from spin‐frustrated semiconducting behavior to ferrimagnetism. The results underscore VPM's potential for low‐impact, high‐precision synthesis of multifunctional oxides, aligning with circular economy principles by reducing waste and enhancing recyclability. Applications span spintronics, neuromorphic computing, and sustainable catalysis.
- 17 November 2025
- Published by Wiley in Chemistry–Methods
- Vol. 6 (1)
Open AccessMetamorphosis of Multilayered‐(NH 4 ) 2 V 7 O 16 Squares to Zinc Vanadate and w‐ZnO Nanoparticles via Zinc Metalation through Atomic Layer Deposition: Precision and Sustainability in Material Transformation
Vapor phase metalation (VPM) via atomic layer deposition is emerging as a sustainable, solvent‐free method for precise material functionalization. This study demonstrates selective zinc metalation of multilayered (NH 4 ) 2 V 7 O1 16 nanostructured squares using diethylzinc (DEZ) as a volatile precursor. A sequence of samples—(HDA)V 7 O 16 ·nH 2 O (S‐1), (NH 4 ) 2 V 7 O 16 ·nH 2 O (S‐2), iodine‐functionalized (S‐3), and Zn‐metalated (S‐4)—was characterised via XRD, HRTEM/SAED, FIB‐SEM, ESEM, ATR‐FTIR, Raman microscopy, and XPS. The V7 7 O 16 bilayer framework revealed a triclinic crystal structure (P‐1 space group) for the first time. VPM enabled the transformation into Zn 3 V3 3 O 8 and wurtzite ZnO nanoparticles with structural precision and minimal waste. Metalation was achieved from a single half‐cycle (210 seconds total), allowing fine control over deposition dynamics. This process also induced a magnetic transition from spin‐frustrated semiconducting behavior to ferrimagnetism. The results underscore VPM's potential for low‐impact, high‐precision synthesis of multifunctional oxides, aligning with circular economy principles by reducing waste and enhancing recyclability. Applications span spintronics, neuromorphic computing, and sustainable catalysis.
- Open Access
- 25 October 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (44) , 22203-22233
Zn and Al vapour-phase metalation of polyamide-6 via ALD: structural, functional, and biomedical insights
This study reports the effect of diethylzinc (DEZ) and trimethylaluminium (TMA) functionalization on polyamide-6 (PA6) films using the vapour-phase metalation (VPM) process within an atomic layer deposition (ALD) chamber. The resulting zinc- and aluminium-functionalized films are referred to henceforth as PA6-Zn and PA6-Al, respectively. Biocompatibility was preliminarily assessed via C2C12 cytotoxicity testing. Reaction mechanisms were examined using density functional theory, electrostatic potential maps, Mulliken charge distribution, and X-ray photoelectron spectroscopy, revealing interactions between metal precursors and PA6 amide groups. DFT confirmed α-PA6 as the dominant structure and identified reactive sites influencing functionalization pathways. Structural and morphological changes were analysed via environmental scanning electron microscopy and X-ray diffraction. ESEM showed Zn-functionalized PA6 forming strand-like structures, while Al-functionalized PA6 developed pore-like cavities. XRD indicated increased crystallinity upon metalation, with the α/γ crystallite size ratio following the trend: PA6-Al > PA6-Zn > PA6. Spectroscopic analysis using infrared and Raman microscopy, along with UV–visible spectroscopy, highlighted modifications in chemical bonding and polymorphism, aligning with DFT predictions. Al functionalization had a stronger influence on PA6’s spectroscopic and some mechanical properties, whereas Zn functionalization notably enhanced failure strain. Barrier and mechanical properties were evaluated, showing that Zn-functionalized PA6 exhibited superior oxygen permeability, while both metal-modified films improved water vapour transmission rates compared to bare PA6. Cytotoxicity testing revealed enhanced C2C12 cell proliferation in the order PA6-Al > PA6-Zn > PA6, suggesting VPM-modified PA6 as a promising material for biomedical applications. Graphical Abstract
- 25 October 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (44) , 22203-22233
Open AccessZn and Al vapour-phase metalation of polyamide-6 via ALD: structural, functional, and biomedical insights
This study reports the effect of diethylzinc (DEZ) and trimethylaluminium (TMA) functionalization on polyamide-6 (PA6) films using the vapour-phase metalation (VPM) process within an atomic layer deposition (ALD) chamber. The resulting zinc- and aluminium-functionalized films are referred to henceforth as PA6-Zn and PA6-Al, respectively. Biocompatibility was preliminarily assessed via C2C12 cytotoxicity testing. Reaction mechanisms were examined using density functional theory, electrostatic potential maps, Mulliken charge distribution, and X-ray photoelectron spectroscopy, revealing interactions between metal precursors and PA6 amide groups. DFT confirmed α-PA6 as the dominant structure and identified reactive sites influencing functionalization pathways. Structural and morphological changes were analysed via environmental scanning electron microscopy and X-ray diffraction. ESEM showed Zn-functionalized PA6 forming strand-like structures, while Al-functionalized PA6 developed pore-like cavities. XRD indicated increased crystallinity upon metalation, with the α/γ crystallite size ratio following the trend: PA6-Al > PA6-Zn > PA6. Spectroscopic analysis using infrared and Raman microscopy, along with UV–visible spectroscopy, highlighted modifications in chemical bonding and polymorphism, aligning with DFT predictions. Al functionalization had a stronger influence on PA6’s spectroscopic and some mechanical properties, whereas Zn functionalization notably enhanced failure strain. Barrier and mechanical properties were evaluated, showing that Zn-functionalized PA6 exhibited superior oxygen permeability, while both metal-modified films improved water vapour transmission rates compared to bare PA6. Cytotoxicity testing revealed enhanced C2C12 cell proliferation in the order PA6-Al > PA6-Zn > PA6, suggesting VPM-modified PA6 as a promising material for biomedical applications. Graphical Abstract
- Open Access
- 25 August 2021
- Published by Universidad Nacional Autonoma de Mexico in Mundo Nano. Revista Interdisciplinaria en Nanociencias y Nanotecnología
- Vol. 16 (30) , 1e-34e
La problemática de los micro y nanoplásticos en las costas americanas del Océano Pacífico
Este trabajo aborda la problemática representada por los micro y nanoplásticos (MP y NP, respectivamente) en las costas americanas del Océano Pacífico, desde la perspectiva de la Red Micro y Nano Allpa Pacha. Esta red está conformada por científicos de Chile, Perú, Costa Rica, Colombia, Ecuador, Panamá y México, quienes, preocupados por el impacto en el ambiente y su repercusión en la salud, decidieron establecer colaboraciones científicas internacionales para la geolocalización, monitoreo y caracterización de MP y NP presentes en las costas del Océano Pacífico en el continente americano. Se espera aportar datos basados en evidencias científicas y armonizados, que impacten en la enseñanza y en la planificación de medidas de control y regulación de estos contaminantes en nuestros países. En este trabajo se incluyen algunos aspectos de polímeros y plásticos, definiciones de MP’s y NP’s, y sus diversos impactos, la problemática de la toma de muestras, caracterización adecuada, entre otros. Unas de las conclusiones permitieron determinar que hay muchas características de los NP’s y MP’s sin investigar como la interacción con otros productos químicos, el impacto de la morfología en la biodisponibilidad, la formación de adherencias y liberación de las mismas durante su contacto con los compartimentos ambientales, la dependencia de su composición con su comportamiento y destino, entre otras. Asimismo, se determinó que todo aporte a la mitigación del problema de estos materiales debe incluir la concientización, la prevención y la reducción, mediante un enfoque integral de educación y capacitación, y considerando todos los actores de la sociedad, responsables de la problemática generada, bajo un enfoque de evidencia científica. Finalmente, se determinó que el tema aún está en su fase inicial, y la información es reiterativa y auto referenciada.
- 25 August 2021
- Published by Universidad Nacional Autonoma de Mexico in Mundo Nano. Revista Interdisciplinaria en Nanociencias y Nanotecnología
- Vol. 16 (30) , 1e-34e
Open AccessLa problemática de los micro y nanoplásticos en las costas americanas del Océano Pacífico
Este trabajo aborda la problemática representada por los micro y nanoplásticos (MP y NP, respectivamente) en las costas americanas del Océano Pacífico, desde la perspectiva de la Red Micro y Nano Allpa Pacha. Esta red está conformada por científicos de Chile, Perú, Costa Rica, Colombia, Ecuador, Panamá y México, quienes, preocupados por el impacto en el ambiente y su repercusión en la salud, decidieron establecer colaboraciones científicas internacionales para la geolocalización, monitoreo y caracterización de MP y NP presentes en las costas del Océano Pacífico en el continente americano. Se espera aportar datos basados en evidencias científicas y armonizados, que impacten en la enseñanza y en la planificación de medidas de control y regulación de estos contaminantes en nuestros países. En este trabajo se incluyen algunos aspectos de polímeros y plásticos, definiciones de MP’s y NP’s, y sus diversos impactos, la problemática de la toma de muestras, caracterización adecuada, entre otros. Unas de las conclusiones permitieron determinar que hay muchas características de los NP’s y MP’s sin investigar como la interacción con otros productos químicos, el impacto de la morfología en la biodisponibilidad, la formación de adherencias y liberación de las mismas durante su contacto con los compartimentos ambientales, la dependencia de su composición con su comportamiento y destino, entre otras. Asimismo, se determinó que todo aporte a la mitigación del problema de estos materiales debe incluir la concientización, la prevención y la reducción, mediante un enfoque integral de educación y capacitación, y considerando todos los actores de la sociedad, responsables de la problemática generada, bajo un enfoque de evidencia científica. Finalmente, se determinó que el tema aún está en su fase inicial, y la información es reiterativa y auto referenciada.
- 20 June 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (45) , 17548-17556
Ammonium hexadeca-oxo-heptavanadate microsquares. A new member in the family of the V7O16 mixed-valence nanostructures
This paper presents the new mixed valence heptavanadate (NH4)2V7O16 micro squares, a further but carbonless member of the vanadium oxide nanotubes and nanourchins family, where ammonium ions replace the long carbon chain amines.
- 20 June 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (45) , 17548-17556
Ammonium hexadeca-oxo-heptavanadate microsquares. A new member in the family of the V7O16 mixed-valence nanostructures
This paper presents the new mixed valence heptavanadate (NH4)2V7O16 micro squares, a further but carbonless member of the vanadium oxide nanotubes and nanourchins family, where ammonium ions replace the long carbon chain amines.