WZWei Zhou

Wei Zhou

*This is an algorithmically generated author record based on publicly available information.

Wei Zhou has a total of 88 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Self-interferometric helical phase resolving of 2 μm vortex beams

    by Xiaozhao Song, Jiacheng Ma, Tongxi Gu, Kairui Miao, Yongzheng Liu, Ziyi Jin, Zhiwei Cao, Yao Zhou, Yanzu Jiang, Zhaoji Wang, et al.

    Optical vortex beams are characterized by helical phase fronts and phase singularities, whereas vector vortex beams additionally contain spatially varying polarization that can strongly affect interference visibility. This makes the phase topology of directly emitted vector vortex lasers difficult to identify by conventional self-referenced interferometry, especially when imperfect coherence obscures forked dislocations. Here, we demonstrate a Mach-Zehnder self-interferometric phase-retrieval method for 2 μm vector vortex beams. By using controllable lateral displacement, relative phase gradients, and calibrated lens-induced curvature, the inherent phase characteristics of orbital angular momentum (OAM) are revealed through interference fringes. Combined with inverse Fourier phase retrieval and a locally plane or calibrated spherical reference, the magnitude and sign of the OAM topological charge can be determined from the recovered helical phase. Interference simulations further show that transverse displacement redistributes visible phase singularities, while the contour-defined winding number of a specified scalar component remains invariant provided that the component is nonzero on the contour and no zero crosses it. To the best of our knowledge, this is the first experimental resolution of the helical phase of vector vortex beams in the 2 μm band. The method also separates OAM phase winding from polarization-dependent visibility and provides a practical diagnostic route for mid-infrared structured-light sources used in free-space optical links, lidar, and mode-resolved beam characterization.

  • Observation of a 2-µm flat-top beam carrying orbital angular momentum by intracavity incoherent superposition

    by Kairui Miao, Tongxi Gu, Xiaozhao Song, Yongzheng Liu, Kexian Cao, Rui Cheng, Hui Kang, Xin Hou, Senxin Fu, Zhishneg Qian, et al.

    Flat-top beams exhibit symmetrical intensity and steep edge in cross-section with wide application. Especially, orbital angular momentum (OAM) endows it with the potential to achieve uniform angular momentum transfer or phase encoding. In this Letter, we observed a flat-top beam carrying + ℏ OAM by intracavity incoherent superposition in an X-cavity Tm: YAG ceramic laser. The corresponding M 2 factors are 2.24 and 2.08 with a typical output power of 470 mW around ~2011.2 nm. Simultaneously, a radially polarized vortex beam (RPVB) with + ℏ OAM was observed. Further simulations and experiments revealed that a flat-top beam is formed by the incoherent superposition of RPVB and a Gaussian beam. Using a homemade M–Z interferometer, we observed vortex stripes’ chirality reversal before and after the focal plane of the convex lens. To the best of our knowledge, this is the first observation of a flat-top beam with OAM at 2 µm wavelength.

  • 2 µm spatiotemporal mode-locked fiber laser based on intelligent hybrid fiber structure strategy

    by Tianchen Yao, Fangfang Zheng, Hui Kang, Qiang Zhu, Xiaozhao Song, Jiachen Ma, Wei Zhou, Haotian Wang, Fei Wang, Yishan Wang, et al.


  • Intracavity vector vortex pattern generation in a diode-pumped Tm:Y2O3 ceramic laser with X-type folded resonator

    by Hui Kang, Xiaozhao Song, Kairui Miao, Tianchen Yao, Jiacheng Ma, Zhisheng Qian, Tongxi Gu, Yongzheng Liu, Senxin Fu, Xin Hou, et al.

    This paper reports 2 μm intracavity vector vortex pattern generation in a diode-pumped isotropic Tm:Y2O3 ceramic laser with an X-folded cavity configuration. By employing off-axis non-collinear hybrid pumping technology and control of the aperture, it demonstrates the direct generation and switching of four distinct polarized vortex beams—linearly polarized, elliptically polarized, anti-radially polarized and anti-azimuthally polarized—with a central wavelength of ∼2050 nm and carrying orbital angular momentum (OAM) of ±1ℏ. The corresponding M2 factors are measured between 2.03 and 2.3, while maintaining high stability (minimum RMS of 0.47%), high purity (maximum SNR of 16.7 dB), and typical output power up to 242 mW. Additionally, various vortex arrays with different numbers of vortices having OAM of ±1ℏ are generated, and their basis vector synthesis and orbital angular momentum are theoretically simulated and experimentally verified. To the best of our knowledge, this represents the first laser that directly generates vector vortex beams using isotropic ceramics at the 2 μm wavelength. As such, it establishes a paradigm for structured light field manipulation based on ceramic gain media in the mid-infrared spectral region.


  • Mode-locked cylindrical vector vortex beam unlocked the generation of a 2 µm multidimensional ultrafast laser

    by Hui Kang, Tong Xu, Kairui Miao, Qiang Zhu, Tianchen Yao, Xiaozhao Song, Jiacheng Ma, Wei Zhou, Zhisheng Qian, Zhengpin Xie, et al.

    The development of multidimensional lasers, particularly 2 µm vector vortex pulsed beams, has garnered significant interest for applications in laser medicine and optical communication. This paper reports the successful achievement of mode-locked azimuthally polarized vector beams (APVB) and radially polarized vector beams (RPVB) in a c-cut Tm:CaYAlO4 crystal cavity. Utilizing a semiconductor saturable absorber mirror (SESAM), the laser produced output powers of 110 mW (APVB) and 98 mW (RPVB), with pulse durations of 41.2 ps and 49.7 ps, and vortex topological charges of -1 and +1, respectively. This represents the first stable mode-locked states of the cylindrical vector vortex beam in a 2 µm solid-state laser.


  • Observation of 2 µm multiple annular structured vortex pulsed beams by cavity-mode tailoring

    by Qiang Zhu, Xiaozhao Song, Luyao Li, Hui Kang, Tianchen Yao, Guangmiao Liu, Kairui Miao, Wei Zhou, Haotian Wang, Xiaodong Xu, et al.

    In the past few years, annular structured beams have been extensively studied due to their unique “doughnut” structure and characteristics such as phase and polarization vortices. Especially in the 2 µm wavelength range, they have shown promising applications in fields such as novel laser communication, optical processing, and quantum information processing. In this Letter, we observed basis vector patterns with orthogonality and completeness by finely cavity-mode tailoring with end-mirror space position in a Tm:CaYAlO4 laser. Multiple annular structured beams including azimuthally, linearly, and radially polarized beams (APB, LPB, and RPB) operated at a Q-switched mode-locking (QML) state with a typical output power of ∼18 mW around 1962 nm. Further numerical simulation proved that the multiple annular structured beams are the coherent superposition of different Hermitian Gaussian modes. Using a self-made M–Z interferometer, we have demonstrated that the obtained multiple annular beams have a vortex phase with orbital angular momentum (OAM) of l = ±1. To the best of our knowledge, this is the first observation of vector and scalar annular vortex beams in the 2 µm solid-state laser.


  • Near thermal noise limit, 5W single frequency fiber laser base on the ring cavity configuration

    by Jianing Zhang, Xiaolan Liu, Haotian Wang, Jun Guo, Xiaofang Yang, Chuanyong Ren, Wei Zhou, Deyuan Shen

    In this study, we present an ultralow noise single-frequency fiber laser operating at 1550 nm, utilizing a traveling-wave ring cavity configuration. The frequency noise of the laser approaches the thermal noise limit, achieving a white noise level of 0.025 Hz2/Hz, resulting in an instantaneous linewidth of 0.08 Hz. After amplification, the output power reaches 4.94 W while maintaining the same low white noise level as the laser oscillator. The integration linewidths of the laser oscillator and amplifier are 221 Hz and 665 Hz, respectively, with both exhibiting relative intensity noises that approach the quantum shot noise limit. To the best of our knowledge, this work shows the lowest frequency noise combined with relatively high power for this type of ring cavity fiber laser.


  • Laser frequency stabilization based on Fano resonance in a microcylinder cavity

    by Yaohui Xu, Haotian Wang, Jun Guo, Jianing Zhang, Wei Zhou, Deyuan Shen

    We investigate the application of Fano resonance in microcylinder cavities for laser frequency stabilization. By combining Fano resonance and the differential subtraction method, we successfully reproduce the error signal of the traditional Pound–Drever–Hall (PDH) technique. The frequency noise of the laser, when locked to both microsphere and microcylinder cavities, approaches the thermal noise limit. The microcylinder cavity, with a high Q factor of ∼108, benefiting from its large mode volume, exhibits a significant reduction in frequency noise by one order of magnitude compared with a microsphere in the frequency range of 0.1 to 10 kHz, achieving a minimum noise of ∼2.25 Hz2/Hz at 10 kHz. As this approach eliminates the need for additional electronic circuits typically used in the PDH technique, it holds promise as a cost-effective and reliable solution for laser frequency stabilization.


  • 2 µm cylindrical vector beam generation from a c-cut Tm:CaYAlO4 crystal resonator

    by Yangyu Liu, Luyao Li, Xiaozhao Song, Wei Zhou, Qiang Zhu, Guangmiao Liu, Xiaodong Xu, Haotian Wang, Xue Cao, Yishan Wang, et al.

    Different from the traditional ideal column symmetry cavities, we directly generated the cylindrical vector pulsed beams in the folded six-mirror cavity by employing a c-cut Tm:CaYAlO4 (Tm:CYA) crystal and SESAM. By adjusting the distance between the curved cavity mirror (M4) and the SESAM, both the radially polarized beam and azimuthally polarized beam are generated around 1962 nm and the two vectorial modes can be freely switched in the resonator. Further increased the pump power to 7 W, the stable radially polarized Q-switched mode-locked (QML) cylindrical vector beams were also obtained with an output power of 55 mW, the sub-pulse repetition rate of 120.42 MHz, pulse duration of ∼0.5 ns and the beam quality factor M2 of ∼2.9. To our knowledge, this is the first report of radially and azimuthally polarized beams in the 2 µm wavelength solid-state resonator.


  • Energy prediction with physics-guided neural networks for high-power laser facility

    by Lu Zou, Yuanchao Geng, Guodong Liu, Lanqin Liu, Bingguo Liu, Fengdong Chen, Wei Zhou, Dongxia Hu, Qiang Yuan

    The energy accuracy of laser beams is an essential property of inertial confinement fusion (ICF). However, the energy gain is difficult to be predicted and controlled precisely due to the dramatically-increasing complexity of huge optical systems. Artificial neural network is a numerical algorithm with valuable flexibility that maps inputs to output values, which provides an approach to figure out this issue. In the study, a novel method combining deep neural networks and the Frantz- Nodvik equations is proposed to predict the output energy of the main amplifier in the high-power ICF laser system. To improve the prediction performance, the artificial neural network counts in more related factors that are neglected in traditional configurations. Dynamic state parameters describing amplification capacity are output by neural network and constrained by physical prior knowledge. The experimental results show that the proposed method provides a more accurate prediction of output energy than the conventional fitting approaches, from 6.5% to 4.2% on relative deviation. The study investigates the methodology of combining neural networks with physical models to reproduce a complex energy gain process and to represent a nonlinear unresolvable model, which can be exploited to aid model development of other measurable processes in physical science.