Yoshiaki Nakano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yoshiaki Nakano has a total of 217 co-authors. Here are the top co-authors by number of shared publications:
- Masakazu Sugiyama
The University of Tokyo
45 shared publications - Takuo Tanemura
Department of Electrical Engineering and Information Systems, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
37 shared publications - Kentaroh Watanabe
The University of Tokyo
28 shared publications - Hassanet Sodabanlu
The University of Tokyo
14 shared publications - Ryota Tanomura
Department of Electrical Engineering and Information Systems, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
13 shared publications - Go Soma
School of Engineering, The University of Tokyo, Tokyo, Japan
11 shared publications
Latest Publications
- 9 November 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (22) , 6291
High-resolution speckle-based single-pixel imaging using a silicon photonic nonredundant optical phased array
An optical phased array (OPA) is a promising wavefront-controlling device for imaging applications due to its compact and high-speed nature. However, conventional periodic OPA has a limited number of resolvable points, which scales only linearly with the number of optical antennas N . Here, we experimentally demonstrate high-resolution imaging using a nonredundant OPA (NR-OPA). Due to the nonredundant antenna layout of the NR-OPA based on the Costas array, the number of resolvable points scales quadratically with N . Combined with the speckle-based single-pixel imaging (SSPI) scheme, which avoids the need for precise phase calibration, we experimentally achieve a large number of resolvable imaging points exceeding 10,000 using a silicon photonic NR-OPA chip with only N =127 without sweeping the wavelength. The demonstrated scheme provides a promising route toward megapixel imaging by a compact OPA chip with a reduced number of phase shifters.
- 9 November 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (22) , 6291
High-resolution speckle-based single-pixel imaging using a silicon photonic nonredundant optical phased array
An optical phased array (OPA) is a promising wavefront-controlling device for imaging applications due to its compact and high-speed nature. However, conventional periodic OPA has a limited number of resolvable points, which scales only linearly with the number of optical antennas N . Here, we experimentally demonstrate high-resolution imaging using a nonredundant OPA (NR-OPA). Due to the nonredundant antenna layout of the NR-OPA based on the Costas array, the number of resolvable points scales quadratically with N . Combined with the speckle-based single-pixel imaging (SSPI) scheme, which avoids the need for precise phase calibration, we experimentally achieve a large number of resolvable imaging points exceeding 10,000 using a silicon photonic NR-OPA chip with only N =127 without sweeping the wavelength. The demonstrated scheme provides a promising route toward megapixel imaging by a compact OPA chip with a reduced number of phase shifters.
- Open Access
- 1 July 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (7)
Nonlocal electro-optic metasurface modulator using Q -tuned dimerized nanometallic grating
Electro-optic metasurface modulators are attracting increasing interest for spatiotemporal applications, including high-speed imaging, free-space optical communication, and diffractive computing. In this paper, we demonstrate high-speed nonlocal metasurface modulators utilizing a single-layer dimerized nanometallic grating integrated with an organic electro-optic material. By introducing a symmetry-breaking perturbation to the grating spacings, we achieve systematic tuning of the resonance quality (Q) factor across a broad spectral range from 1350 to 1450 nm. As a result, we obtain a high Q factor of 570, along with a large modulation depth exceeding 50% through precise Q tuning to achieve a high extinction ratio. The measured 3-dB modulation bandwidth reaches 650 MHz for a 150-μm-square device, which is currently limited by the RC time constant and should scale to tens-of-GHz regime with reduced device dimensions. Owing to its simple single-layer structure and spatially scalable surface-normal configuration, the demonstrated platform offers a promising pathway toward compact and high-speed free-space electro-optic modulators.
- 1 July 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (7)
Open AccessNonlocal electro-optic metasurface modulator using Q -tuned dimerized nanometallic grating
Electro-optic metasurface modulators are attracting increasing interest for spatiotemporal applications, including high-speed imaging, free-space optical communication, and diffractive computing. In this paper, we demonstrate high-speed nonlocal metasurface modulators utilizing a single-layer dimerized nanometallic grating integrated with an organic electro-optic material. By introducing a symmetry-breaking perturbation to the grating spacings, we achieve systematic tuning of the resonance quality (Q) factor across a broad spectral range from 1350 to 1450 nm. As a result, we obtain a high Q factor of 570, along with a large modulation depth exceeding 50% through precise Q tuning to achieve a high extinction ratio. The measured 3-dB modulation bandwidth reaches 650 MHz for a 150-μm-square device, which is currently limited by the RC time constant and should scale to tens-of-GHz regime with reduced device dimensions. Owing to its simple single-layer structure and spatially scalable surface-normal configuration, the demonstrated platform offers a promising pathway toward compact and high-speed free-space electro-optic modulators.
- 9 June 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (10) , 1213-1224
Design and Demonstration of InGaAs/GaAs/GaAsP Stepped Quantum Well Solar Cell
In the present work, a series of multiple‐stepped quantum well (MSQW) solar cells were demonstrated, with GaAs step layers inserted between strain‐balanced InGaAs wells and GaAsP barriers. We have studied carrier recombination dynamics and carrier escape kinetics from the wells, comparing the MSQW with the normal multiple quantum well (MQW). Carrier recombination rate was examined by time‐resolved photoluminescence (PL), and a longer carrier lifetime was observed for the MSQW. Carrier escape from the wells was also investigated in terms of temperature‐dependent PL, and smaller thermal activation energy was also observed for the MSQW. Carrier radiative recombination loss was investigated by bias‐dependent PL, and it was found to be smaller for the MSQW than for the normal MQW. Such advantages of the MSQW allowed us to stack a sufficient number of quantum wells to increase short‐circuit current without degrading fill factor. The simulation has also been performed in triple‐junction GaInP/GaAs/Ge solar cell devices with InGaAs/GaAs/GaAsP stepped quantum wells. When standard GaInP/GaAs/Ge solar cells had optimal active layer thickness, the conversion efficiency increased from 24.2% to 33.4%. The positive effects of embedded quantum wells are proven to help improve triple‐junction GaInP/GaAs/Ge solar cell performance.
- 9 June 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (10) , 1213-1224
Design and Demonstration of InGaAs/GaAs/GaAsP Stepped Quantum Well Solar Cell
In the present work, a series of multiple‐stepped quantum well (MSQW) solar cells were demonstrated, with GaAs step layers inserted between strain‐balanced InGaAs wells and GaAsP barriers. We have studied carrier recombination dynamics and carrier escape kinetics from the wells, comparing the MSQW with the normal multiple quantum well (MQW). Carrier recombination rate was examined by time‐resolved photoluminescence (PL), and a longer carrier lifetime was observed for the MSQW. Carrier escape from the wells was also investigated in terms of temperature‐dependent PL, and smaller thermal activation energy was also observed for the MSQW. Carrier radiative recombination loss was investigated by bias‐dependent PL, and it was found to be smaller for the MSQW than for the normal MQW. Such advantages of the MSQW allowed us to stack a sufficient number of quantum wells to increase short‐circuit current without degrading fill factor. The simulation has also been performed in triple‐junction GaInP/GaAs/Ge solar cell devices with InGaAs/GaAs/GaAsP stepped quantum wells. When standard GaInP/GaAs/Ge solar cells had optimal active layer thickness, the conversion efficiency increased from 24.2% to 33.4%. The positive effects of embedded quantum wells are proven to help improve triple‐junction GaInP/GaAs/Ge solar cell performance.
- Open Access
- 5 December 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (49) , eaea3538
17-GHz lossless InP-membrane active metasurface
High-speed active metasurfaces enable spatiotemporal light control within an ultrathin device layer, offering previously unexplored possibilities for optical communication, sensing, and computing. However, a trade-off between electrical conductivity and optical loss has hindered the realization of a high-speed, low-loss device. Here, we experimentally demonstrate an active metasurface operating at 1.5-μm wavelength range that achieves a record-high 17.5-GHz modulation bandwidth while maintaining a high quality ( Q ) factor of 102 and an ultralow optical loss of 0.56 dB. This is enabled by the indium phosphide (InP) membrane platform, where n-InP offers high electron mobility and low free-carrier absorption simultaneously. A high- Q Friedrich-Wintgen quasi-bound-state-in-the-continuum mode within the InP-membrane high-contrast grating (InP HCG) traps light in the organic electro-optic material for efficient modulation. The InP HCG also functions as an ultralow-resistance interdigitated electrode, enabling 50-fold faster modulation than silicon-based counterparts. Our work paves the way toward active metasurfaces for high-speed spatiotemporal light control beyond the GHz regime.
- 5 December 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (49) , eaea3538
Open Access17-GHz lossless InP-membrane active metasurface
High-speed active metasurfaces enable spatiotemporal light control within an ultrathin device layer, offering previously unexplored possibilities for optical communication, sensing, and computing. However, a trade-off between electrical conductivity and optical loss has hindered the realization of a high-speed, low-loss device. Here, we experimentally demonstrate an active metasurface operating at 1.5-μm wavelength range that achieves a record-high 17.5-GHz modulation bandwidth while maintaining a high quality ( Q ) factor of 102 and an ultralow optical loss of 0.56 dB. This is enabled by the indium phosphide (InP) membrane platform, where n-InP offers high electron mobility and low free-carrier absorption simultaneously. A high- Q Friedrich-Wintgen quasi-bound-state-in-the-continuum mode within the InP-membrane high-contrast grating (InP HCG) traps light in the organic electro-optic material for efficient modulation. The InP HCG also functions as an ultralow-resistance interdigitated electrode, enabling 50-fold faster modulation than silicon-based counterparts. Our work paves the way toward active metasurfaces for high-speed spatiotemporal light control beyond the GHz regime.
- Open Access
- 24 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10070
Ultrafast one-chip optical receiver with functional metasurface
High-speed optical receivers are crucial in modern optical communication systems. While complex photonic integrated circuits (PICs) are widely employed to harness the full degrees of freedom (DOFs) of light for efficient data transmission, their waveguide nature inherently constrains two-dimensional spatial scaling to accommodate a large number of optical signals in parallel. Here we present a scalable optical receiver platform that fully exploits the high spatial parallelism and ultrabroad bandwidth of light, while leveraging all DOFs—intensity, phase, and polarization. Our solution integrates a thin metasurface, composed of silicon nanoposts, with ultrafast membrane photodetectors on a compact chip. The metasurface provides all the functionalities of conventional PICs for normal-incident spatially parallelized light, enabling high-speed detection of optical signals in various modulation formats, including simultaneous detection of 320-gigabit-per-second four-channel four-level pulse amplitude modulation (PAM4) signals and coherent detection of 240-gigabit-per-second 64-ary quadrature amplitude modulation (64QAM) signals.
- 24 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10070
Open AccessUltrafast one-chip optical receiver with functional metasurface
High-speed optical receivers are crucial in modern optical communication systems. While complex photonic integrated circuits (PICs) are widely employed to harness the full degrees of freedom (DOFs) of light for efficient data transmission, their waveguide nature inherently constrains two-dimensional spatial scaling to accommodate a large number of optical signals in parallel. Here we present a scalable optical receiver platform that fully exploits the high spatial parallelism and ultrabroad bandwidth of light, while leveraging all DOFs—intensity, phase, and polarization. Our solution integrates a thin metasurface, composed of silicon nanoposts, with ultrafast membrane photodetectors on a compact chip. The metasurface provides all the functionalities of conventional PICs for normal-incident spatially parallelized light, enabling high-speed detection of optical signals in various modulation formats, including simultaneous detection of 320-gigabit-per-second four-channel four-level pulse amplitude modulation (PAM4) signals and coherent detection of 240-gigabit-per-second 64-ary quadrature amplitude modulation (64QAM) signals.
- Open Access
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1061-1067
Silicon Photonic Coherent WDM Transmitter Employing Cascaded Micro-Ring Modulators on a Mach–Zehnder Interferometer
The explosive growth of generative AI and cloud computing demands higher-speed transceivers at datacenter interconnects. Conventional wavelength-division-multiplexed (WDM) coherent systems enable large-capacity transmission but suffer from high complexity and cost due to multiple discrete components required at the transceivers. Optical frequency combs (OFCs) potentially offer a promising solution to provide cost-effective multi-wavelength sources, but compact WDM in-phase quadrature (IQ) modulators compatible with OFC sources remain undeveloped. In this paper, we present a silicon photonic WDM IQ modulator using micro-ring modulators (MRMs) for OFC-based coherent systems. Through comprehensive numerical analysis, we reveal that the 4-MRMs/$\lambda$ configuration allows nearly chirp-free coherent modulation both in the over- and under-coupled MRM driving conditions. A proof-of-concept experimental demonstration is achieved using a compact silicon photonic chip containing 16 integrated MRMs. Dual-wavelength 28-Gbaud quadrature phase-shift keying signals are generated through precise tuning of resonant wavelengths of all MRMs and phase biases.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (3) , 1061-1067
Open AccessSilicon Photonic Coherent WDM Transmitter Employing Cascaded Micro-Ring Modulators on a Mach–Zehnder Interferometer
The explosive growth of generative AI and cloud computing demands higher-speed transceivers at datacenter interconnects. Conventional wavelength-division-multiplexed (WDM) coherent systems enable large-capacity transmission but suffer from high complexity and cost due to multiple discrete components required at the transceivers. Optical frequency combs (OFCs) potentially offer a promising solution to provide cost-effective multi-wavelength sources, but compact WDM in-phase quadrature (IQ) modulators compatible with OFC sources remain undeveloped. In this paper, we present a silicon photonic WDM IQ modulator using micro-ring modulators (MRMs) for OFC-based coherent systems. Through comprehensive numerical analysis, we reveal that the 4-MRMs/$\lambda$ configuration allows nearly chirp-free coherent modulation both in the over- and under-coupled MRM driving conditions. A proof-of-concept experimental demonstration is achieved using a compact silicon photonic chip containing 16 integrated MRMs. Dual-wavelength 28-Gbaud quadrature phase-shift keying signals are generated through precise tuning of resonant wavelengths of all MRMs and phase biases.
- Open Access
- 7 September 2025
- Published by MDPI AG in Inorganics
- Vol. 13 (9) , 302
Prototypes of Highly Effective Stress Balancing AlN Interlayers in MOVPE GaN-on-Si (111)
The GaN-on-Si virtual substrate is now an indispensable platform for the application of GaN in the fields of power devices, radio frequency, light-emitting devices, etc. Such applications are still in need of more effective stress balancing techniques to achieve higher quality and stress balance in GaN-on-Si at a lower thickness. In this study, three promising practical prototypes of highly effective stress-balancing structures are proposed to realize the concept of an ideal AlN interlayer (AlN-IL) featuring a completely relaxed lower AlN/GaN interface and a fully strained upper GaN/AlN interface. The first is a single-layer AlN interlayer grown via precursor pulsed-injection (PI-AlN-IL). The second combines a low-temperature AlN (LT-AlN) underlayer with a PI-AlN-IL. The third integrates LT-AlN with a high-temperature AlN cap. Compared with optimal conventional single-layer AlN interlayer references, all these designs more effectively induced compressive stress and strain in overlying GaN layers. This study opens new technical paths to balancing stress in GaN-on-Si systems at a reduced thickness more efficiently.
- 7 September 2025
- Published by MDPI AG in Inorganics
- Vol. 13 (9) , 302
Open AccessPrototypes of Highly Effective Stress Balancing AlN Interlayers in MOVPE GaN-on-Si (111)
The GaN-on-Si virtual substrate is now an indispensable platform for the application of GaN in the fields of power devices, radio frequency, light-emitting devices, etc. Such applications are still in need of more effective stress balancing techniques to achieve higher quality and stress balance in GaN-on-Si at a lower thickness. In this study, three promising practical prototypes of highly effective stress-balancing structures are proposed to realize the concept of an ideal AlN interlayer (AlN-IL) featuring a completely relaxed lower AlN/GaN interface and a fully strained upper GaN/AlN interface. The first is a single-layer AlN interlayer grown via precursor pulsed-injection (PI-AlN-IL). The second combines a low-temperature AlN (LT-AlN) underlayer with a PI-AlN-IL. The third integrates LT-AlN with a high-temperature AlN cap. Compared with optimal conventional single-layer AlN interlayer references, all these designs more effectively induced compressive stress and strain in overlying GaN layers. This study opens new technical paths to balancing stress in GaN-on-Si systems at a reduced thickness more efficiently.
- Top Cited PapersOpen Access
- 25 August 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Complete vectorial optical mode converter using multi-layer metasurface
Vectorial optical mode converters that can transform orthogonal sets of multiple input vector beams into other orthogonal sets are attractive for various applications in optics and photonics. While multi-plane light conversion (MPLC) and metasurface technologies have been explored to individually address multiple spatial mode conversion and polarization mode manipulation, there has been no universal methodology to simultaneously convert a set of multiple vectorial modes with spatially non-uniform wavefronts and polarizations. Here, we present a general device framework to achieve complete vectorial mode conversion based on the MPLC concept incorporating multi-layer metasurfaces. The effectiveness of our method is confirmed experimentally by demonstrating 6-mode (3 spatial modes × 2 polarization modes) multiplexer fabricated on a compact chip. Additionally, we apply it to design devices with more advanced functionalities: a mode-division-multiplexed dual-polarization coherent receiver and spatial-mode-multiplexed vectorial holography. The versatility of our protocol makes it a powerful tool for realizing universal optical mode converters.
- 25 August 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Top Cited PapersOpen AccessComplete vectorial optical mode converter using multi-layer metasurface
Vectorial optical mode converters that can transform orthogonal sets of multiple input vector beams into other orthogonal sets are attractive for various applications in optics and photonics. While multi-plane light conversion (MPLC) and metasurface technologies have been explored to individually address multiple spatial mode conversion and polarization mode manipulation, there has been no universal methodology to simultaneously convert a set of multiple vectorial modes with spatially non-uniform wavefronts and polarizations. Here, we present a general device framework to achieve complete vectorial mode conversion based on the MPLC concept incorporating multi-layer metasurfaces. The effectiveness of our method is confirmed experimentally by demonstrating 6-mode (3 spatial modes × 2 polarization modes) multiplexer fabricated on a compact chip. Additionally, we apply it to design devices with more advanced functionalities: a mode-division-multiplexed dual-polarization coherent receiver and spatial-mode-multiplexed vectorial holography. The versatility of our protocol makes it a powerful tool for realizing universal optical mode converters.
- 13 December 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (24) , 7238-7241
Metasurface-based functional optical splitter for a spatially parallelized dual-polarization coherent modulator
We propose a surface-normal dual-polarization in-phase and quadrature modulator (DP-IQM) that employs a thin dielectric metasurface (MS) layer inserted on a high-speed electro-absorptive modulator array. The metasurface provides the functionalities of all the passive components necessary for a DP-IQM, including a polarization beam splitter/combiner and an interferometric circuit, to a normal-incident beam. A dielectric metasurface composed of silicon nanoposts is designed and fabricated to experimentally demonstrate polarization and beam splitting functionalities with a phase error of less than 0.08 rad and a power imbalance of less than 0.9 dB. These small errors correspond to an error-vector magnitude of less than 7% when it is used to generate dual-polarization quaternary phase-shift-keying (DP-QPSK) or 16 quadrature amplitude modulation (DP-16QAM) signals. The surface-normal configuration of our scheme allows scaling to a large two-dimensional (2D) array to generate spatially parallelized DP coherent signals for various applications, including optical communication, computing, and sensing.
- 13 December 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (24) , 7238-7241
Metasurface-based functional optical splitter for a spatially parallelized dual-polarization coherent modulator
We propose a surface-normal dual-polarization in-phase and quadrature modulator (DP-IQM) that employs a thin dielectric metasurface (MS) layer inserted on a high-speed electro-absorptive modulator array. The metasurface provides the functionalities of all the passive components necessary for a DP-IQM, including a polarization beam splitter/combiner and an interferometric circuit, to a normal-incident beam. A dielectric metasurface composed of silicon nanoposts is designed and fabricated to experimentally demonstrate polarization and beam splitting functionalities with a phase error of less than 0.08 rad and a power imbalance of less than 0.9 dB. These small errors correspond to an error-vector magnitude of less than 7% when it is used to generate dual-polarization quaternary phase-shift-keying (DP-QPSK) or 16 quadrature amplitude modulation (DP-16QAM) signals. The surface-normal configuration of our scheme allows scaling to a large two-dimensional (2D) array to generate spatially parallelized DP coherent signals for various applications, including optical communication, computing, and sensing.