TGTerry N. Guo

Terry N. Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Terry N. Guo has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    I/Q Imbalance Fingerprinting for Identifying Counterfeit Wireless COTS Transceivers

    by Quy Ton Le, Wesam Al Amiri, Terry N. Guo, Syed Rafay Hasan

    Counterfeits in commercial-off-the-shelf (COTS) devices pose significant security risks to supply chains, emphasizing the need for robust authentication methods. As the Internet of Things (IoT) continues to expand across various domains, such as autonomous vehicles (AVs), smart homes, and industrial automation, IoT devices have become ubiquitous. Many of these devices are equipped with wireless transceivers, enabling the use of radio frequency fingerprinting (RFF) for device authentication. One of the common RFF techniques is to extract unique features from in-phase and quadrature (I/Q) imbalance measurements. However, existing RFF techniques often rely on the use of a common test receiver, which limits their applicability in real world deployments. In this work, we propose a novel RFF technique independent of a common test receiver that leverages the crosstalk effect in the transceiver. An individual I/Q imbalance measurement is converted into an abstract data point that can be a vector value or, more generally, a probability density function (PDF). Our approach employs a statistical modeling framework that is lightweight and computationally efficient, eliminating the need for large labeled datasets or frequent model retraining. This makes the method well suited to real time implementation on platforms with limited computation and memory, since constellation gating, I/Q imbalance estimation, and PDF comparison can be implemented with simple streaming updates and a single distance check per recording. To examine the feasibility of the proposed method, we conducted extensive experiments using software-defined radios (SDRs) in different environments. Statistical analysis of the extracted fingerprints reveals that for a given device, the maximum measurement deviation (MMD) between a measured data point and the center of multiple measured points remains consistently smaller than the minimum inter-device distance, suggesting that it is feasible to generate stable and discriminative RFFs to authenticate COTS devices with transceivers in the supply chain.


  • Open Access

    Supply Chain Exploitation of Secure ROS 2 Systems: A Proof-of-Concept on Autonomous Platform Compromise via Keystore Exfiltration

    by Tahmid Hasan Sakib, Yago Romano Martinez, Carter Brady, Syed Rafay Hasan, Terry N. Guo

    This paper presents a proof-of-concept supply chain attack against the Secure ROS 2 (SROS 2) framework, demonstrated on a Quanser QCar2 autonomous vehicle platform. A Trojan-infected Debian package modifies core ROS 2 security commands to exfiltrate newly generated keystore credentials via DNS in base64-encoded chunks to an attacker-controlled nameserver. Possession of these credentials enables the attacker to rejoin the SROS 2 network as an authenticated participant and publish spoofed control or perception messages without triggering authentication failures. We evaluate this capability on a secure ROS 2 Humble testbed configured for a four-stop-sign navigation routine using an Intel RealSense camera for perception. Experimental results show that control-topic injections can cause forced braking, sustained high-speed acceleration, and continuous turning loops, while perception-topic spoofing can induce phantom stop signs or suppress real detections. The attack generalizes to any data distribution service (DDS)-based robotic system using SROS 2, highlighting the need for both supply chain integrity controls and runtime semantic validation to safeguard autonomous systems against insider and impersonation threats.

  • Open Access

    Survey of Navigational Perception Sensors’ Security in Autonomous Vehicles

    by Abhijeet Solanki, Wesam Al Amiri, Marim Mahmoud, Blaine Swieder, Syed Rafay Hasan, Terry N. Guo

    The adoption of autonomous vehicles (AVs) significantly increased in recent years, playing a crucial role in enhancing transportation safety and efficiency, expanding mobility options, and reducing user costs. However, as AVs become more connected and automated, they also become more susceptible to malicious attacks, making it imperative to prioritize their security. Specifically, AVs are vulnerable to a range of cyber-threats, leading to a growing body of literature on potential cyberattacks targeting AVs. A key focus of existing research is understanding these threats and proposing mitigation strategies, particularly those aimed at attacks on navigational perception sensors, which are critical to AV navigation and decision-making. AVs rely on an array of navigational perception sensors, including LiDAR, cameras, RADAR, global positioning system (GPS) sensors, and ultrasonic sensors, to ensure secure and safe operation. However, adversarial manipulation of these sensors can compromise an AV’s navigational perception system, potentially leading to catastrophic consequences. While existing surveys provide valuable insights on AV cybersecurity challenges, several gaps remain unexplored, such as hardware security issues in AVs, analyzing sensor fusion attacks and evaluating practical defense implementations. To address these gaps, this paper makes a novel contribution by offering a comprehensive review of sensor fusion vulnerabilities that have not been sufficiently addressed in previous literature, specifically focusing on the compounded effects of sensor manipulation in AVs. In addition, this paper introduces a new classification of sensor vulnerabilities, highlighting practical defense mechanisms based on real-world simulation and testbed environments, a key contribution not explored in earlier works. We also introduce a detailed classification of sensor vulnerabilities, categorize the attacks that exploit these vulnerabilities, and critically assess existing countermeasures and defense mechanisms. Our study provides unique insights into the practical implementation of these countermeasures through simulations and testbeds, which have been underrepresented in prior research. This approach aims to support the development of more robust security solutions for AVs.


  • Open Access

    Towards Trustworthy AI: Analyzing Model Uncertainty through Monte Carlo Dropout and Noise Injection

    by Chern Chao Tai, Wesam Al Amiri, Abhijeet Solanki, Douglas Alan Talbert, Nan Guo, Syed Rafay Hasan

    Autonomous vehicles require intelligent computer vision (CV) to perform critical navigational perception tasks. To achieve this, sensors such as camera, LiDAR and radar are utilized to provide data to artificial intelligence (AI) systems. Continuous monitoring of these intelligent CV systems is required to achieve a trustworthy AI system in a zero-trust (ZT) environment. This paper introduces a novel two-stage framework that provides a mechanism towards achieving this monitoring for a ZT environment. We made use of Monte Carlo (MC) dropout with One-Class Classification techniques to propose a framework towards trustworthy AI systems for AVs. Through extensive experimentation with varying noise levels and number of MC samples, we demonstrate that our framework achieves promising results in anomaly detection. In particular, our framework explores the trade-off between detection accuracy and computational overhead, where we achieved a high FPS of 46.4 with MC size of 5 while the accuracy is as low as 61.5%. This study would provide us with valuable insights for real-world AV applications.


  • Precise Carrier-Phase-Based Ranging and Motion Detection by Reusing OFDM Data Subcarriers: Analysis and Demonstration

    by Wesam Al Amiri, Terry N. Guo, Allen B. MacKenzie

    Carrier-phase-based ranging can achieve highly accurate ranging at the sub-wavelength level. This paper explores and experimentally demonstrates the reuse of orthogonal frequency division multiplexing (OFDM) communication signals for precise carrier-phase-based ranging. The approach involves leveraging a large number of phases extracted from OFDM subcarriers, including both pilot and data subcarriers, to suppress phase noise. For the best outcome, optimal selection of subcarrier frequencies is considered. The selection is formulated as a max-min optimization problem and studied with consideration of measurement error tolerance, along with analysis and quantitative assessment of range ambiguity defined in pairwise error probability. A decision-assistance phase extraction method is introduced to make use of data subcarriers in addition to the pilots. An iterative algorithm is proposed for ultra-accurate carrier frequency offset (CFO) correction, which is essential to measure the range-related phase polluted by phase noise for precise ranging. Laboratory proof-of-concept prototyping and experiments are conducted based on a bi-static setup in the fashion of simultaneous communication and sensing (a subcategory of integrated sensing and communication (ISAC)), which can be extended to a multi-static configuration. The simulation and experimental results demonstrate that, by using four or more data subcarriers in addition to the four pilots in a WiFi signal centered at 2 GHz, the proposed scheme can effectively mitigate the impact of phase noise to achieve millimeter-level accuracy without interrupting communication. This suggests that the proposed method is promising for detecting and estimating micro-motion.


  • Open Access

    Efficient Road Traffic Estimation for Proactive Beam Allocation in an ISAC Setup

    by Wesam Al Amiri, Terry N. Guo, Allen B. Mackenzie

    Building efficient and effective road traffic monitoring systems has become a major challenge in different countries, mainly due to the rapid growth of the metropolis road network and the booming of vehicles. Existing traffic monitoring methods are accurate but typically come with inherent limitations, prompting the exploration of alternative techniques. Integrated sensing and communication (ISAC) offers an effective approach to traffic monitoring by leveraging the synergy between sensing and communication to enhance system efficiency and reduce costs. In this paper, we present a particular ISAC use case tailored for radio-based traffic monitoring. Both traffic density and speed estimations take advantage of communication functionality, involving the reuse of communication waveforms for the sensing purpose. In particular, proactive millimeter-wave (mmWave) beam allocation aided by traffic density estimation is studied to enhance communication coverage of vehicular users in the area of interest for bandwidth-intensive applications. Specifically, we exploit orthogonal frequency division multiplexing (OFDM) communication signals of opportunity reflected from targets (vehicles) to efficiently estimate the road traffic density and speed in a road section. A hybrid scheme combining model-based and data-driven methods is considered to build efficient estimators that require reduced-size training data and are less computationally complex. Simulation and comparison results demonstrate that the proposed traffic estimation techniques can accurately handle a wide range of numbers of vehicles, even with a small-sized dataset. Furthermore, the proactive beam allocation analysis shows that the quality of service (QoS, in terms of outage probability) of the communication system is effectively improved.


  • Open Access

    Multi-Agent Reinforcement Learning With Measured Difference Reward for Multi-Association in Ultra-Dense mmWave Network

    by Xuebin Li, Terry N. Guo, Allen B. Mackenzie

    Millimeter Wave (mmWave) communication technology is anticipated to play a vital role in meeting the growing demand for the scarce bandwidth in wireless communications. However, mmWave networks are highly susceptible to blockage. Thus, some mitigation techniques, such as multi-connectivity, need to be considered. Densely deploying mmWave base stations (mBSs) to form an ultra-dense network (UDN) also helps. With a mix of different technologies, optimally allocating resources becomes challenging. In this paper, we study mmWave user multi-association in a two-tier heterogeneous ultra-dense network (HetUDN) with a relatively large number of user equipments (UEs). We propose a framework of multi-agent reinforcement learning (MARL) to tackle the complicated optimization problem, leveraging its adaptivity to the communication environment. The proposed scheme considers mmWave beam-division based multi-connectivity and takes advantage of a macro base station (MBS) for indirect cooperation among agents (UEs). In particular, we borrow a credit-assignment technique called difference reward (DR) to deal with a relatively large MARL system with a large action space, which, to the best of our knowledge, is the first time to apply MARL with DR in user association. Furthermore, the proposed schemes are scalable mainly due to fixed observation dimensions and individual actions taken by UEs independently, ensuring that the operation is independent of the numbers of mBSs and UEs. Numerical results suggest that the two MARL schemes with measured DR could achieve a good balance between energy efficiency and QoS outage, and the one using extended DR (EDR) offers additional performance improvement.


  • Open Access

    The Influence of Smart Manufacturing towards Energy Conservation: A Review

    by Shane Terry, Hao Lu, Ismail Fidan, Yunbo Zhang, Khalid Tantawi, Terry Guo, Bahram Asiabanpour

    Today, the current trends of manufacturing are towards the adaptation and implementation of smart manufacturing, which is a new initiative to turn the traditional factories into profitable innovation facilities. However, the concept and technologies are still in a state of infancy, since many manufacturers around the world are not fully knowledgeable about the benefits of smart manufacturing compared to their current practices. This article reviews several aspects of smart manufacturing and introduces its advantages in terms of energy-saving and production efficiency. This article also points out that some areas need further research so that smart manufacturing can be shaped better.


  • A Fast Multi-Source Sound DOA Estimator Considering Colored Noise in Circular Array

    by Yuhong Yao, Terry N. Guo, Zhe Chen, Chong Fu

    Sound direction of arrival (DOA) estimation keeps finding new applications. For instance, real-time sound DOA estimation enabled by acoustic sensors on low-cost and limited-resource devices can enhance or create many consumer use cases. Indeed, tracking multiple moving sound sources in noisy or reverberated condition with a cost-effective platform is highly desirable. In this paper, we develop a computation-aware DOA estimator that uses weighting in frequency domain. It relies on single source zones (SSZs) and circular integrated cross spectrum (CICS) techniques and peak search on DOA histogram. The existing histogram-based multi-source DOA estimation is fundamentally limited in angular resolution, and the CICS process is very time consuming. To tackle these problems, we propose a weighting method that exploits the unevenness of intermediate DOA estimation errors over the frequencies of interest, and a simple yet effective strategy to reduce search range. Two underlying mechanisms, the impact of the colored noise of microphones and the frequency-dependent behavior (statistic model) of DOA estimation errors, are unveiled. We have developed an experimental platform using commercially off-the-shelf devices to verify design objectives, including feasibility and real-time requirement. The proposed techniques are validated on the developed platform and the system performance is evaluated experimentally in a real-world environment. It is observed the DOA estimation resolution is improved roughly from 30° to 15° and the overall computation is reduced by 68%.