Maria Iloridou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maria Iloridou has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Foteini-Niovi Pavlidou
School of Electrical and Computer Engineering, Aristotle University of Thessaloniki, 37782 Thessaloniki Greece
5 shared publications - Costas Michaelides
Wireless Networking Research Group, Universitat Pompeu Fabra, Barcelona, Spain
4 shared publications Fotini-Niovi Pavlidou
3 shared publicationsAntonios G. Sarigiannidis
Dept. of Inf., Aristotle Univ. of Thessaloniki, Thessaloniki, Greece
1 shared publicationGeorgios Papadimitriou
Dept. of Inf., Aristotle Univ. of Thessaloniki, Thessaloniki, Greece
1 shared publicationMalamati D. Louta
Dept. of Inf. & Telecommun. Eng., Univ. of Western Macedonia, Kozani, Greece
1 shared publication
Latest Publications
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 25 (5) , 7408-7421
A Low Latency Data Transmission Scheme for Buffered IoT Devices in NB-IoT Networks
In narrowband Internet of Things (NB-IoT) networks, latency reduction is a significant issue especially regarding IoT applications with strict latency requirements. The signalling overhead constitutes the major factor of latency increase. 3GPP made several attempts to decrease the signalling overhead for massive machine type communications (mMTC) in NB-IoT networks. Among that attempts, early data transmission (EDT) is one of the latest efforts that reduces the signalling overhead by allowing data transmission without a connection establishment. Although EDT can support the transmission of multiple data packets besides one, it cannot deal with the randomness of data packet arrivals at buffered IoT devices. In this paper, a new data transmission scheme is proposed that reduces signalling overhead by employing piggybacking. Specifically, the proposed scheme concerns buffered IoT devices, which transmit the first data packet of the buffer by participating in the contention-based random access (RA) and the following data packets on the reserved data channels without taking part in RA again, according to the proposed scheme. The effectiveness of the proposed scheme is evaluated with simulation experiments versus the number of IoT devices and mean interarrival time of data packets at each IoT device. Simulation results show that the proposed scheme reduces dropped packets, service delay and enhances throughput.
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 25 (5) , 7408-7421
A Low Latency Data Transmission Scheme for Buffered IoT Devices in NB-IoT Networks
In narrowband Internet of Things (NB-IoT) networks, latency reduction is a significant issue especially regarding IoT applications with strict latency requirements. The signalling overhead constitutes the major factor of latency increase. 3GPP made several attempts to decrease the signalling overhead for massive machine type communications (mMTC) in NB-IoT networks. Among that attempts, early data transmission (EDT) is one of the latest efforts that reduces the signalling overhead by allowing data transmission without a connection establishment. Although EDT can support the transmission of multiple data packets besides one, it cannot deal with the randomness of data packet arrivals at buffered IoT devices. In this paper, a new data transmission scheme is proposed that reduces signalling overhead by employing piggybacking. Specifically, the proposed scheme concerns buffered IoT devices, which transmit the first data packet of the buffer by participating in the contention-based random access (RA) and the following data packets on the reserved data channels without taking part in RA again, according to the proposed scheme. The effectiveness of the proposed scheme is evaluated with simulation experiments versus the number of IoT devices and mean interarrival time of data packets at each IoT device. Simulation results show that the proposed scheme reduces dropped packets, service delay and enhances throughput.
- Open Access
- 20 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
In Search of the Lost Nodes in BANs
Communication in Body Area Networks (BANs) involves extremely weak signals because of safety regulations. Human mobility adds one more layer of complexity as it has an effect on path loss depending on the activity. In this paper, we improve the quality of service (QoS) by searching for the lost nodes. Specifically, an Emergency Phase (EP) is added after RAP1 of IEEE 802.15.6-2012 superframe. The connected nodes transmit rescue beacons to reach distressed nodes, i.e. nodes that are disconnected. If a distressed node receives a rescue beacon, it participates in the current EP. The packets are buffered and relayed to the hub by the connected nodes. Our results show that when EP is enabled it is feasible to reach more nodes.
- 20 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessIn Search of the Lost Nodes in BANs
Communication in Body Area Networks (BANs) involves extremely weak signals because of safety regulations. Human mobility adds one more layer of complexity as it has an effect on path loss depending on the activity. In this paper, we improve the quality of service (QoS) by searching for the lost nodes. Specifically, an Emergency Phase (EP) is added after RAP1 of IEEE 802.15.6-2012 superframe. The connected nodes transmit rescue beacons to reach distressed nodes, i.e. nodes that are disconnected. If a distressed node receives a rescue beacon, it participates in the current EP. The packets are buffered and relayed to the hub by the connected nodes. Our results show that when EP is enabled it is feasible to reach more nodes.
- Open Access
- 17 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
An Improved Mobility Aware Relaying Scheme for Body Area Networks
Communication in Body Area Networks (BANs) involves weak signals, due to safety regulations, huge pathloss from the absorption and usually high mobility. In this work, we introduce an improved mobility aware relaying scheme for BANs, as an alternative to the two-hop star topology extension of IEEE 802.15.6-2012, in order to enhance packet delivery. Specifically, an emergency phase (EP) is added after the regular random access phase (RAP1) of the superframe and the connected nodes transmit rescue beacons to reach disconnected nodes. When a disconnected node receives a rescue beacon, it participates in the current EP. The packets are buffered and relayed to the hub by the connected nodes. Simulation results show that it is feasible to receive more packets compared to the standard with a justified increase of energy consumption due to random access which is compensated with increased packet delivery.
- 17 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessAn Improved Mobility Aware Relaying Scheme for Body Area Networks
Communication in Body Area Networks (BANs) involves weak signals, due to safety regulations, huge pathloss from the absorption and usually high mobility. In this work, we introduce an improved mobility aware relaying scheme for BANs, as an alternative to the two-hop star topology extension of IEEE 802.15.6-2012, in order to enhance packet delivery. Specifically, an emergency phase (EP) is added after the regular random access phase (RAP1) of the superframe and the connected nodes transmit rescue beacons to reach disconnected nodes. When a disconnected node receives a rescue beacon, it participates in the current EP. The packets are buffered and relayed to the hub by the connected nodes. Simulation results show that it is feasible to receive more packets compared to the standard with a justified increase of energy consumption due to random access which is compensated with increased packet delivery.
- 31 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 7 (6) , 4862-4871
Adaptive Global Reclustering in MWSNs
Energy conservation is crucial for clustered wireless sensor networks (WSNs) due to the bounded energy at sensor nodes. Energy conservation is achieved mainly through load balancing, which is realized with reclustering in frequent time intervals called rounds. Although in clustering the round duration is typically fixed throughout the network lifetime, the use of a dynamic round duration based on energy exhaustion at sensor nodes has also been proposed. Even though many attempts have been made to determine the round duration dynamically, all of them focus on WSNs. However, in mobile wireless sensor networks (MWSNs), apart from energy exhaustion, packet loss due to node mobility is also an important issue to be considered in the case of dynamic round duration. To investigate the problem of the calculation of the dynamic round duration in MWSNs, in this work we evaluate the applicability of an existing recluster triggering scheme initially proposed for WSNs, which is adaptive to energy consumption at cluster-heads (CHs). We also propose a new scheme, the lost ratio reclustering (LRRC), which provides adaptivity to the percentage of mobility-induced packet losses at each CH. Furthermore, the case of reclustering in fixed time intervals is also considered. Simulation results show the effectiveness of the LRRC scheme in increasing the packet delivery ratio (PDR) and reducing the clustering energy overhead.
- 31 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 7 (6) , 4862-4871
Adaptive Global Reclustering in MWSNs
Energy conservation is crucial for clustered wireless sensor networks (WSNs) due to the bounded energy at sensor nodes. Energy conservation is achieved mainly through load balancing, which is realized with reclustering in frequent time intervals called rounds. Although in clustering the round duration is typically fixed throughout the network lifetime, the use of a dynamic round duration based on energy exhaustion at sensor nodes has also been proposed. Even though many attempts have been made to determine the round duration dynamically, all of them focus on WSNs. However, in mobile wireless sensor networks (MWSNs), apart from energy exhaustion, packet loss due to node mobility is also an important issue to be considered in the case of dynamic round duration. To investigate the problem of the calculation of the dynamic round duration in MWSNs, in this work we evaluate the applicability of an existing recluster triggering scheme initially proposed for WSNs, which is adaptive to energy consumption at cluster-heads (CHs). We also propose a new scheme, the lost ratio reclustering (LRRC), which provides adaptivity to the percentage of mobility-induced packet losses at each CH. Furthermore, the case of reclustering in fixed time intervals is also considered. Simulation results show the effectiveness of the LRRC scheme in increasing the packet delivery ratio (PDR) and reducing the clustering energy overhead.
- 23 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (16) , 7141-7148
An Improved Mobility Aware Relaying Scheme for Body Area Networks
Communication in Body Area Networks (BANs) involves weak signals, due to safety regulations, huge pathloss from the absorption and usually high mobility. In this work, we introduce an improved mobility aware relaying scheme for BANs, as an alternative to the two-hop star topology extension of IEEE 802.15.6-2012, in order to enhance packet delivery. Specifically, an emergency phase (EP) is added after the regular random access phase (RAP1) of the superframe and the connected nodes transmit rescue beacons to reach disconnected nodes. When a disconnected node receives a rescue beacon, it participates in the current EP. The packets are buffered and relayed to the hub by the connected nodes. Simulation results show that it is feasible to receive more packets compared to the standard with a justified increase of energy consumption due to random access which is compensated with increased packet delivery.
- 23 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (16) , 7141-7148
An Improved Mobility Aware Relaying Scheme for Body Area Networks
Communication in Body Area Networks (BANs) involves weak signals, due to safety regulations, huge pathloss from the absorption and usually high mobility. In this work, we introduce an improved mobility aware relaying scheme for BANs, as an alternative to the two-hop star topology extension of IEEE 802.15.6-2012, in order to enhance packet delivery. Specifically, an emergency phase (EP) is added after the regular random access phase (RAP1) of the superframe and the connected nodes transmit rescue beacons to reach disconnected nodes. When a disconnected node receives a rescue beacon, it participates in the current EP. The packets are buffered and relayed to the hub by the connected nodes. Simulation results show that it is feasible to receive more packets compared to the standard with a justified increase of energy consumption due to random access which is compensated with increased packet delivery.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 249-250
In Search of the Lost Nodes in BANs
Communication in Body Area Networks (BANs) involves extremely weak signals because of safety regulations. Human mobility adds one more layer of complexity as it has an effect on path loss depending on the activity. In this paper, we improve the quality of service (QoS) by searching for the lost nodes. Specifically, an Emergency Phase (EP) is added after RAP1 of IEEE 802.15.6-2012 superframe. The connected nodes transmit rescue beacons to reach distressed nodes, i.e. nodes that are disconnected. If a distressed node receives a rescue beacon, it participates to the current EP. The packets are buffered and relayed to the hub by the connected nodes. Our results show that when EP is enabled it is feasible to reach more nodes.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 249-250
In Search of the Lost Nodes in BANs
Communication in Body Area Networks (BANs) involves extremely weak signals because of safety regulations. Human mobility adds one more layer of complexity as it has an effect on path loss depending on the activity. In this paper, we improve the quality of service (QoS) by searching for the lost nodes. Specifically, an Emergency Phase (EP) is added after RAP1 of IEEE 802.15.6-2012 superframe. The connected nodes transmit rescue beacons to reach distressed nodes, i.e. nodes that are disconnected. If a distressed node receives a rescue beacon, it participates to the current EP. The packets are buffered and relayed to the hub by the connected nodes. Our results show that when EP is enabled it is feasible to reach more nodes.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 690-695
Poly-parametric performance evaluation of mobility models for clustering Wireless Mobile Sensor Networks
In wireless mobile sensor networks (WMSNs), the majority of clustering algorithms employ random waypoint (RWP) to consider mobility in nodes. In this work we evaluate the performance of clustering under RWP and random walk (RW) derivatives mobility models through simulations, since a particular mobility model cannot represent the mobility behavior of all nodes. The performance evaluation is conducted for two clustering approaches; the non-overlap and overlap clusters. In the first, a non-cluster-head node belongs exactly to one cluster, while in the second to more than one cluster. The latter is quite realistic and scarcely examined in the literature. Simulation results show that the performance of a clustering algorithm is strongly affected by the node mobility model selection and by many aspects of the model.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 690-695
Poly-parametric performance evaluation of mobility models for clustering Wireless Mobile Sensor Networks
In wireless mobile sensor networks (WMSNs), the majority of clustering algorithms employ random waypoint (RWP) to consider mobility in nodes. In this work we evaluate the performance of clustering under RWP and random walk (RW) derivatives mobility models through simulations, since a particular mobility model cannot represent the mobility behavior of all nodes. The performance evaluation is conducted for two clustering approaches; the non-overlap and overlap clusters. In the first, a non-cluster-head node belongs exactly to one cluster, while in the second to more than one cluster. The latter is quite realistic and scarcely examined in the literature. Simulation results show that the performance of a clustering algorithm is strongly affected by the node mobility model selection and by many aspects of the model.
- Open Access
- 15 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 17 (1) , 427-468
Architectures and Bandwidth Allocation Schemes for Hybrid Wireless-Optical Networks
The combination of the most prestigious optical and wireless technologies for implementing a modern broadband integrated access network has been progressively gaining ground. By extending the network coverage in a cost-efficient way, hybrid wireless-optical networks are able to enclose a larger number of potential subscribers than standalone access architectures. Hence, they are capable of increasing revenue levels and facilitating commercial penetration to the telecom market. At the same time, hybrid wireless-optical networks pose an ambitious, alternative, and efficient solution to coping with new bandwidth-hungry user applications. Hybrid wireless-optical networks incorporate sophisticated modules, fabrics, and network entities to effectively provide adequate quality of service (QoS) provisioning. This survey endeavors to classify the main features of wireless-optical integration. We provide a comprehensive compilation of the latest architectures, integrated technologies, QoS features, and dynamic bandwidth allocation (DBA) schemes. In addition, new trends towards wireless-optical convergence are presented. Moreover, as the up-to-date hybrid network standards remain under development, since there is not yet an integrated standard for approving hybrid network access platforms, we accompany this survey with detailed challenges indicating potential avenues of future research.
- 15 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 17 (1) , 427-468
Open AccessArchitectures and Bandwidth Allocation Schemes for Hybrid Wireless-Optical Networks
The combination of the most prestigious optical and wireless technologies for implementing a modern broadband integrated access network has been progressively gaining ground. By extending the network coverage in a cost-efficient way, hybrid wireless-optical networks are able to enclose a larger number of potential subscribers than standalone access architectures. Hence, they are capable of increasing revenue levels and facilitating commercial penetration to the telecom market. At the same time, hybrid wireless-optical networks pose an ambitious, alternative, and efficient solution to coping with new bandwidth-hungry user applications. Hybrid wireless-optical networks incorporate sophisticated modules, fabrics, and network entities to effectively provide adequate quality of service (QoS) provisioning. This survey endeavors to classify the main features of wireless-optical integration. We provide a comprehensive compilation of the latest architectures, integrated technologies, QoS features, and dynamic bandwidth allocation (DBA) schemes. In addition, new trends towards wireless-optical convergence are presented. Moreover, as the up-to-date hybrid network standards remain under development, since there is not yet an integrated standard for approving hybrid network access platforms, we accompany this survey with detailed challenges indicating potential avenues of future research.