RTRiku Takahashi

Riku Takahashi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Riku Takahashi has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Chemical functionalization of a photopolymer resin to enable protein immobilization in 3D-printed microfluidic devices

    by Tamara M. Iakimova, Teresa Bosch-Tamayo, Riku Takahashi, Aya Tanaka, Amy Q. Shen, Mark V. Sullivan


  • Open Access

    Model-based Analysis and Prediction of Swelling-induced Buckling of Hydrogel Structures using a Finite Element Method

    by Hiroki Miyazako, Riku Takahashi, Aya Tanaka, Masumi Yamaguchi

    Non-linear buckling of hydrogels has been studied across fields from soft robotics to microfluidics.Recently, it was found that swelling of hydrogel partially bonded to a substrate spontaneously forms unique patterns known as telephone-cord buckling, which have since been used for various biological actuators such as for chemical stimulation of cells and biomimetics of peristaltic pumping. However, reliable prediction of these complex buckled structures prior to fabrication remains a challenge due to the non-linear and coupled nature of swelling and buckling. To address this, we propose a physical model of buckling hydrogel based on a finite element method (FEM). The proposed model simplifies the buckling process by representing it as a combination of inelastic deformation caused by swelling and physical contact between the hydrogel and rigid substrate. It is designed to be intuitive and compatible with standard FEM software, making it broadly accessible. We show that it can simulate buckled structures consistent with experimentally observed ones. Furthermore, it enables simulations of buckling in complex geometries and with non-uniform swelling. These results suggest that our framework is a practical computational tool for pre-experimental design of buckled hydrogel systems, with potential impact on soft actuators, programmable materials, and organ-on-a-chip applications.


  • Open Access

    Organ‐On‐A‐Chip Platforms Created Through Buckled Microchannels of Porous Hydrogel Films

    by Riku Takahashi, Aya Tanaka, Tomoki Saito, Shinya Ohashi, Manabu Muto, Masumi Yamaguchi

    Hydrogel‐based microchannels with biologically similar morphologies and properties can provide excellent platforms for advanced tissue/organ formation in vitro. However, there are still many restrictions on channel morphology, material selection, tubing connections, etc. Here, a novel and versatile method is proposed that couples cononsolvency photopolymerization, which enables the incorporation of porous structures into hydrogels, with on‐chip microchannels formed by buckling of a thin film. This method provides a hydrogel‐based microchannel with improved permeability while maintaining its mechanical properties by incorporating a continuous porous structure into a synthetic polymer network with excellent mechanical properties. Furthermore, by culturing vascular endothelial cells into the microchannel, it is demonstrated that the microchannel works as a vessel‐on‐a‐chip platform that can be used for the evaluation of barrier function, fabrication of various channel shapes, and development of co‐culture systems. This method, which can be adapted to various swellable hydrogels, can provide platforms with properties and functions tailored to the tissue/organ and, thus, it will contribute to the creation of physiologically relevant biological models.


  • Open Access

    Direct Metal Transfer on Swellable Hydrogel with Dehydration-Induced Physical Adhesion

    by Shogo Himori, Riku Takahashi, Aya Tanaka, Masumi Yamaguchi

    Composites of hydrogels and metals are gaining interest because of each material's unique properties. However, the stable adhesion of metals on hydrogels is challenging due to the mechanical mismatch at the soft-hard interface and the liquidity of the water components in hydrogels. We propose a facile physical-adhesion method that involves the dehydration process of hydrogels to transfer metals from a glass substrate. This method is based on the hydrophobic interaction between polymer chains and metals and is stable, even in water. Continuous metal wiring was achieved on a swollen hydrogel, and electrical conduction was effective for a soft electronic device. Therefore, our method could be a versatile method for integrating hydrogels and metals.


  • Open Access

    Biomorphic Actuation Driven Via On‐Chip Buckling of Photoresponsive Hydrogel Films

    by Riku Takahashi, Aya Tanaka, Masumi Yamaguchi

    Remotely controllable photoresponsive hydrogel actuators are promising for applications in multiple fields. However, simple deformation mechanisms, which rely on the general swelling/deswelling, limit their performance and application. Herein, we report a displacement amplification mechanism based on the buckling deformation of photoresponsive hydrogel film. The on‐chip buckled architecture of the hydrogel enables actuation between a flat 2D shape and tubular 3D buckled shape with remarkable performances, including high deformation ratio (height ratio: ≈360%), tunable cycle motion frequency (0.1—1 Hz) and high cyclic stability. Moreover, localized buckling deformation, such as tube opening and closing, can be controlled in response to photostimulation. Inspired by these biomorphic shapes and motions, an intestine‐mimetic device and demonstrate segmentation with substance crushing and peristalsis motion with substance propelling were further fabricated. This study will provide a useful design principle for hydrogel actuators and shed light on diverse applications in soft robotics, dynamic microfluidics and organs‐on‐chips.


  • Open Access

    Collective motion of epithelial cells along a wrinkled 3D-buckled hydrogel

    by Kazuyuki Shigeta, Tatsuya Fukuyama, Riku Takahashi, Kazusa Beppu, Aya Tanaka, Yusuke T. Maeda

    Collective motion of epithelial cell monolayer was studied on a 3D-buckled hydrogel mimicking a wrinkled epithelial surface. Emergent spatial correlation in velocity was found near the wrinkled gel boundary.


  • Tough, permeable and biocompatible microfluidic devices formed through the buckling delamination of soft hydrogel films

    by Riku Takahashi, Hiroki Miyazako, Aya Tanaka, Yuko Ueno, Masumi Yamaguchi

    We demonstrate pressure-driven microfluidic devices based on buckle-delaminated architectures of thin hydrogel films, which exhibit high durability, permeability, and biocompatibility with intricate 3D morphologies.


  • Hydrogel/Elastomer Laminates Bonded via Fabric Interphases for Stimuli-Responsive Actuators

    by Amber M. Hubbard, Wei Cui, Yiwan Huang, Riku Takahashi, Michael D. Dickey, Jan Genzer, Daniel R. King, Jian Ping Gong


  • Dynamic Creation of 3D Hydrogel Architectures via Selective Swelling Programmed by Interfacial Bonding

    by Riku Takahashi, Hiroki Miyazako, Aya Tanaka, Yuko Ueno

    The topological features of material surfaces are crucial to the emergence of functions based on characteristic architectures. Among them, the combination of surface architectures and soft materials, which are highly deformable and flexible, has great potential as regards developing functional materials toward providing/enhancing advanced functions such as switchability and variability. Therefore, a simple yet versatile method for creating three-dimensional (3D) architectures based on soft materials is strongly required. In this study, hydrogels are selected as the soft materials and hydrogel film/rigid substrate layer composites are fabricated to obtain a 3D hydrogel architecture based on swelling instability. When a hydrogel film weakly attached to a rigid substrate is exposed to water, swelling-driven compressive stress induces buckle-delamination of the film from the substrate. Utilizing the chemical modification of a rigid substrate and a conventional photolithography technique, the delamination location is successfully controlled, resulting in a high-aspect-ratio folding architecture at an arbitrary position. In addition, we systematically designed the delamination geometry and chemically tuned the swelling ratio of the hydrogel, leading to the discovery of several new morphology transitions and relationships between the morphologies and the controllable parameters. This work provides a new approach to fabricating highly programmable 3D architectures of soft materials.


  • Double network hydrogels based on semi-rigid polyelectrolyte physical networks

    by Riku Takahashi, Takuma Ikai, Takayuki Kurokawa, Daniel R. King, Jian Ping Gong

    Applying the double network principle to develop tough hydrogels with different polymer chemistries is important for the potential application of hydrogel materials. Synthesis of the two interpenetrated networks with contrasting structure and properties required for double networks usually involves a two-step polymerization process. In this work, we present a new method to synthesize tough double network hydrogels by post-physical crosslinking of linear semi-rigid polyelectrolytes entrapped in a chemically crosslinked neutral network. Owing to their semi-rigid structure, the linear polyelectrolytes form a brittle physical network above their overlap concentration in multi-valent ZrCl2O ion solutions without macroscopic phase separation within the flexible neutral network. The double network hydrogels thus prepared exhibit high modulus (∼1.7 MPa), strength (∼1.3 MPa), fracture strain (∼7.3), and strain energy density (∼5.9 MJ m−3), while containing over 80% water. These materials also exhibit modest self-healing ability (∼51% after 30 minutes), demonstrating an additional benefit of a physical sacrificial network. This method is simpler than the conventional two-step polymerization and could be applied to develop tough hydrogels from rigid polyelectrolytes, including biopolymers such as DNA, HA, and chondroitin sulfate.