Zhenyu Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhenyu Guo has a total of 151 co-authors. Here are the top co-authors by number of shared publications:
- Maria-Magdalena Titirici
Imperial College London
20 shared publications - Zhen Xu
Department of Materials and Henry Royce Institute, University of Manchester, Oxford Rd, Manchester M13 9PL, U.K.
7 shared publications - Heather Au
Department of Chemical Engineering Imperial College London London SW7 2AZ UK
4 shared publications Kaitian Zheng
Department of Chemical Engineering, Imperial College London, London, SW7 2AZ, UK
4 shared publicationsYuanzhu Zhao
Department of Chemical Engineering, Imperial College London, South Kensington Campus, Exhibition Rd, London SW7 2AZ, UK
4 shared publications- Bo Lan
Department of Mechanical Engineering, Imperial College London
3 shared publications
Latest Publications
- 11 November 2026
- Published by Springer Nature in Nature Reviews Clean Technology
- p. 1-23
Zero-excess sodium-metal batteries for post-lithium energy storage
- 11 November 2026
- Published by Springer Nature in Nature Reviews Clean Technology
- p. 1-23
Zero-excess sodium-metal batteries for post-lithium energy storage
- Open Access
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (62) , 43326-43332
The multi-anion environment of Bi 13 S 18 I 2 governs the mechanism of sodium storage
The multi-anion environment of Bi 13 S 18 I 2 modulates the sodium-storage pathway.
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (62) , 43326-43332
Open AccessThe multi-anion environment of Bi 13 S 18 I 2 governs the mechanism of sodium storage
The multi-anion environment of Bi 13 S 18 I 2 modulates the sodium-storage pathway.
- 27 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (59)
Controllable Particle Packing via Scalable Layer‐by‐Layer Assembly of Anode Particles for Fast‐Charging Lithium‐Ion Batteries
Particle packing in battery electrodes is pivotal to the fast‐charging performance of lithium‐ion batteries (LIBs). However, precise control of particle packing structure remains a major challenge in electrode fabrication, primarily owing to the absence of robust interfacial bonding between micron‐scale particles. Herein, we propose a novel layer‐by‐layer single‐layer particle assembly technique to fabricate electrodes with well‐defined particle packing structures. Using this approach, we prepared a 12‐meter‐long graphite (Gr)/hard carbon (HC) hybrid anode featuring a body‐centered cubic (BCC)‐like structure, which maximizes intimate Gr/HC contact interfaces and facilitates solid‐state Li + transport. Coupled with LiFePO 4 (LFP) cathodes, the as‐fabricated anode exhibits a high‐capacity retention of 80.7% after 1650 cycles at 4C. From an electrode design standpoint, this controllable particle‐packing strategy paves the way for a universal framework for developing sustainable, long‐cycling, and fast‐charging electrodes, potentially applicable to many types of battery anodes and cathodes.
- 27 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (59)
Controllable Particle Packing via Scalable Layer‐by‐Layer Assembly of Anode Particles for Fast‐Charging Lithium‐Ion Batteries
Particle packing in battery electrodes is pivotal to the fast‐charging performance of lithium‐ion batteries (LIBs). However, precise control of particle packing structure remains a major challenge in electrode fabrication, primarily owing to the absence of robust interfacial bonding between micron‐scale particles. Herein, we propose a novel layer‐by‐layer single‐layer particle assembly technique to fabricate electrodes with well‐defined particle packing structures. Using this approach, we prepared a 12‐meter‐long graphite (Gr)/hard carbon (HC) hybrid anode featuring a body‐centered cubic (BCC)‐like structure, which maximizes intimate Gr/HC contact interfaces and facilitates solid‐state Li + transport. Coupled with LiFePO 4 (LFP) cathodes, the as‐fabricated anode exhibits a high‐capacity retention of 80.7% after 1650 cycles at 4C. From an electrode design standpoint, this controllable particle‐packing strategy paves the way for a universal framework for developing sustainable, long‐cycling, and fast‐charging electrodes, potentially applicable to many types of battery anodes and cathodes.
- Open Access
- 28 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (53) , e74333
Phase‐Transition Engineering Enables Low‐Strain Cathodes for 192 Wh kg − 1 Sodium‐Ion Batteries
Phase transitions in sodium layered transition metal (TM) oxides often induce microstrain and TM ion migration, leading to structural degradation and poor cycling stability. However, a rational design approach for optimizing phase transitions is still lacking. Here we introduce phase transition potential (Φ phase ) as a rational descriptor to predict and control phase evolution in these cathodes. A lower Φ phase enables smoother Na + migration and slower slab sliding during Na extraction, thereby facilitating a continuous phase transformation rather than abrupt phase changes. Guided by this concept, we design a calcium‐substituted layered oxide, Na 0.96 Ca 0.02 Ni 0.33 Fe 0.33 Mn 0.33 O 2 (NCNFMO), which delivers a specific capacity of 140 mAh g −1 at 0.1 C and retains 84.2% of its initial capacity after 500 cycles at 1 C, compared to only 26.4% retention for NaNi 0.33 Fe 0.33 Mn 0.33 O 2 . Moreover, the NCNFMO||Al@C full cell maintains a high‐capacity retention of 82.5% after 100 cycles, and 6.1 Ah full cell demonstrates an energy density of 192 Wh kg −1 entire cell . These findings offer fundamental insights into phase behavior‐induced microstrain and a promising path toward high‐energy, long‐life sodium‐ion batteries.
- 28 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (53) , e74333
Open AccessPhase‐Transition Engineering Enables Low‐Strain Cathodes for 192 Wh kg − 1 Sodium‐Ion Batteries
Phase transitions in sodium layered transition metal (TM) oxides often induce microstrain and TM ion migration, leading to structural degradation and poor cycling stability. However, a rational design approach for optimizing phase transitions is still lacking. Here we introduce phase transition potential (Φ phase ) as a rational descriptor to predict and control phase evolution in these cathodes. A lower Φ phase enables smoother Na + migration and slower slab sliding during Na extraction, thereby facilitating a continuous phase transformation rather than abrupt phase changes. Guided by this concept, we design a calcium‐substituted layered oxide, Na 0.96 Ca 0.02 Ni 0.33 Fe 0.33 Mn 0.33 O 2 (NCNFMO), which delivers a specific capacity of 140 mAh g −1 at 0.1 C and retains 84.2% of its initial capacity after 500 cycles at 1 C, compared to only 26.4% retention for NaNi 0.33 Fe 0.33 Mn 0.33 O 2 . Moreover, the NCNFMO||Al@C full cell maintains a high‐capacity retention of 82.5% after 100 cycles, and 6.1 Ah full cell demonstrates an energy density of 192 Wh kg −1 entire cell . These findings offer fundamental insights into phase behavior‐induced microstrain and a promising path toward high‐energy, long‐life sodium‐ion batteries.
- Open Access
- 22 March 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (30)
Sustainable Carbon Fibers Enable Stable Long‐Term Lithium Metal Deposition for Prospective Zero‐Excess Lithium Metal Batteries
Three‐dimensional current collectors have emerged as a promising strategy to promote uniform Li deposition and extend the cycle life of zero‐excess lithium metal batteries. However, excessive Li loss in the first cycle due to solid electrolyte interphase (SEI) formation on the large surface area, combined with the use of dense or nonrenewable materials and complex, multistep fabrication processes, limits their practical implementation. In this work, a lightweight, lignin‐derived carbon fiber (CF) current collector is presented. It is fabricated via a simple and sustainable electrospinning process, and after carbonization has abundant structural defects and nanoscale porosity. Surface defects promote the formation of a stable, inorganic‐rich SEI, efficiently passivating the current collector, while pores of ∼1.0–1.4 nm enable quasi‐metallic Li clusters to form before plating, providing a conductive network and distributed nucleation sites that enhance Li plating/stripping reversibility and cycle life. This CF current collector exhibits a first‐cycle active Li loss of only 4.8%–8.9% relative to the typical Li inventory of commercial lithium‐ion battery cathodes and maintains a coulombic efficiency of 99.0% over 200 cycles, demonstrating excellent electrochemical performance.
- 22 March 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (30)
Open AccessSustainable Carbon Fibers Enable Stable Long‐Term Lithium Metal Deposition for Prospective Zero‐Excess Lithium Metal Batteries
Three‐dimensional current collectors have emerged as a promising strategy to promote uniform Li deposition and extend the cycle life of zero‐excess lithium metal batteries. However, excessive Li loss in the first cycle due to solid electrolyte interphase (SEI) formation on the large surface area, combined with the use of dense or nonrenewable materials and complex, multistep fabrication processes, limits their practical implementation. In this work, a lightweight, lignin‐derived carbon fiber (CF) current collector is presented. It is fabricated via a simple and sustainable electrospinning process, and after carbonization has abundant structural defects and nanoscale porosity. Surface defects promote the formation of a stable, inorganic‐rich SEI, efficiently passivating the current collector, while pores of ∼1.0–1.4 nm enable quasi‐metallic Li clusters to form before plating, providing a conductive network and distributed nucleation sites that enhance Li plating/stripping reversibility and cycle life. This CF current collector exhibits a first‐cycle active Li loss of only 4.8%–8.9% relative to the typical Li inventory of commercial lithium‐ion battery cathodes and maintains a coulombic efficiency of 99.0% over 200 cycles, demonstrating excellent electrochemical performance.
- Open Access
- 19 February 2026
- Published by Wiley in Battery Energy
- Vol. 5 (2)
Overdischarge of Spent Lithium Ion Batteries Induced Copper Deposition Onto Cathode for Better Upcycling
An efficient recycling strategy is of importance for reducing the environmental impact of spent lithium‐ion batteries (LIBs), alleviating resource shortages, and achieving high‐value utilization of battery waste. State‐of‐the‐art materials upcycling enables the transformation of spent battery materials into advanced materials with improved performance through modification with external substances. In this work, we introduce an upcycling strategy based on spent LIBs overdischarge, which enables the incorporation of Cu and Li from the anode into LiCoO 2 for the construction of modified LiCoO 2 with structural stability and rate performance. During overdischarge, the anode potential reaches the oxidation potential of Cu foil, generating Cu ions that migrate under the electric field and deposit on the cathode. Simultaneously, lithium from the decomposition of the solid electrolyte interphase on the anode supplements the lithium deficiency in LiCoO 2 . These Cu and Li, combined with cathode electrolyte interphase (CEI) species formed during cycling and Al contamination introduced during the recycling process, contribute to the formation of CEI phases and Cu coated, and Al and Cu doped LiCoO 2 with a stable interface and improved ionic transport properties. Compared with commercial and degraded materials, the upcycled cathode exhibits obvious advantages, delivering an initial capacity of 164.04 mAh g −1 and maintaining 97.4% capacity retention after 300 cycles at 0.5 C. At high current densities of 2 C and 5 C, the material retains capacities of 147.2 mAh g −1 and 132.6 mAh g −1 , respectively. This study demonstrates that introducing beneficial elements during the recycling of spent LIBs enables concurrent improvements in battery performance, cost efficiency, and resource utilization.
- 19 February 2026
- Published by Wiley in Battery Energy
- Vol. 5 (2)
Open AccessOverdischarge of Spent Lithium Ion Batteries Induced Copper Deposition Onto Cathode for Better Upcycling
An efficient recycling strategy is of importance for reducing the environmental impact of spent lithium‐ion batteries (LIBs), alleviating resource shortages, and achieving high‐value utilization of battery waste. State‐of‐the‐art materials upcycling enables the transformation of spent battery materials into advanced materials with improved performance through modification with external substances. In this work, we introduce an upcycling strategy based on spent LIBs overdischarge, which enables the incorporation of Cu and Li from the anode into LiCoO 2 for the construction of modified LiCoO 2 with structural stability and rate performance. During overdischarge, the anode potential reaches the oxidation potential of Cu foil, generating Cu ions that migrate under the electric field and deposit on the cathode. Simultaneously, lithium from the decomposition of the solid electrolyte interphase on the anode supplements the lithium deficiency in LiCoO 2 . These Cu and Li, combined with cathode electrolyte interphase (CEI) species formed during cycling and Al contamination introduced during the recycling process, contribute to the formation of CEI phases and Cu coated, and Al and Cu doped LiCoO 2 with a stable interface and improved ionic transport properties. Compared with commercial and degraded materials, the upcycled cathode exhibits obvious advantages, delivering an initial capacity of 164.04 mAh g −1 and maintaining 97.4% capacity retention after 300 cycles at 0.5 C. At high current densities of 2 C and 5 C, the material retains capacities of 147.2 mAh g −1 and 132.6 mAh g −1 , respectively. This study demonstrates that introducing beneficial elements during the recycling of spent LIBs enables concurrent improvements in battery performance, cost efficiency, and resource utilization.
- Open Access
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (1) , 11-43
Towards inline ultrasonic characterisation of battery slurry mixing: opportunities, challenges, and perspectives
Inefficiencies in the slurry mixing stage are a major factor in high scrap rates in battery manufacturing, thus hindering sustainable production.
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (1) , 11-43
Open AccessTowards inline ultrasonic characterisation of battery slurry mixing: opportunities, challenges, and perspectives
Inefficiencies in the slurry mixing stage are a major factor in high scrap rates in battery manufacturing, thus hindering sustainable production.
- Open Access
- 27 November 2025
- Published by Royal Society of Chemistry (RSC) in EES Batteries
- Vol. 2 (1) , 163-175
Revisiting potassium intercalation in graphite: an operando characterisation and computational approach
A multi-modal, operando characterisation approach was used to revisit the correlation of electrochemical potassiation and structural evolution in graphite, hence unravelling the specific mechanisms of K-ion storage.
- 27 November 2025
- Published by Royal Society of Chemistry (RSC) in EES Batteries
- Vol. 2 (1) , 163-175
Open AccessRevisiting potassium intercalation in graphite: an operando characterisation and computational approach
A multi-modal, operando characterisation approach was used to revisit the correlation of electrochemical potassiation and structural evolution in graphite, hence unravelling the specific mechanisms of K-ion storage.
- Open Access
- 23 November 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (11)
Dendrite Formation and Self‐Healing Mechanism in Ionic Liquid‐Based Magnesium Batteries
Magnesium (Mg) is set as a viable alternative battery material to lithium (Li) owing to its cost, natural abundance, and safety. Nevertheless, the formation of dendrites on Mg anodes remains controversial. While some studies refute their existence, others report contradictory findings influenced by current density and the insufficiently understood roles of electrolyte formulation, additives, and temperature. In this work, these parameters are systematically investigated using symmetric Mg|Mg and asymmetric Mg|TiS 2 cells with tailored ionic‐liquid‐based electrolytes. Furthermore, operando optical microscopy is employed to visualize nucleation and dendritic growth at different current densities. At low current densities (0.1–0.5 mA cm −2 ), non‐uniform island‐like Mg deposits evolved into soft dendrites, finally leading to short‐circuiting. Contrary, higher current densities (1–5 mA cm −2 ) promote uniform, spherical deposits and facilitate stable cycling over 700 cycles. In Mg|TiS 2 asymmetric cells, enhanced cycling stability is observed at 50 mA g −1 , whereas soft dendrite formation at 10 mA g −1 leads to cell failure within 30 cycles. Taking advantage of Mg's safety, cycling of symmetric cells are continued even beyond dendrite‐forming to study morphological and mechanical recovery. Notably, our analysis reveales self‐healing due to dendrite fusion in previously short‐circuited cells. These findings reveal conditions affecting Mg dendrite behavior, highlighting the key roles of current density and temperature in developing stable, rechargeable Mg batteries, and reporting self‐healing in Mg batteries for the first time.
- 23 November 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (11)
Open AccessDendrite Formation and Self‐Healing Mechanism in Ionic Liquid‐Based Magnesium Batteries
Magnesium (Mg) is set as a viable alternative battery material to lithium (Li) owing to its cost, natural abundance, and safety. Nevertheless, the formation of dendrites on Mg anodes remains controversial. While some studies refute their existence, others report contradictory findings influenced by current density and the insufficiently understood roles of electrolyte formulation, additives, and temperature. In this work, these parameters are systematically investigated using symmetric Mg|Mg and asymmetric Mg|TiS 2 cells with tailored ionic‐liquid‐based electrolytes. Furthermore, operando optical microscopy is employed to visualize nucleation and dendritic growth at different current densities. At low current densities (0.1–0.5 mA cm −2 ), non‐uniform island‐like Mg deposits evolved into soft dendrites, finally leading to short‐circuiting. Contrary, higher current densities (1–5 mA cm −2 ) promote uniform, spherical deposits and facilitate stable cycling over 700 cycles. In Mg|TiS 2 asymmetric cells, enhanced cycling stability is observed at 50 mA g −1 , whereas soft dendrite formation at 10 mA g −1 leads to cell failure within 30 cycles. Taking advantage of Mg's safety, cycling of symmetric cells are continued even beyond dendrite‐forming to study morphological and mechanical recovery. Notably, our analysis reveales self‐healing due to dendrite fusion in previously short‐circuited cells. These findings reveal conditions affecting Mg dendrite behavior, highlighting the key roles of current density and temperature in developing stable, rechargeable Mg batteries, and reporting self‐healing in Mg batteries for the first time.
- Open Access
- 14 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Towards Inline Ultrasonic Characterisation of Battery Slurry Mixing: Opportunities, Challenges, and Perspectives
Inefficiencies in the slurry mixing stage are a major factor in high scrap rates in battery manufacturing, thus hindering sustainable production. Current offline characterisation techniques for slurry microstructure and rheology are slow and inadequate for closed-loop quality control or process optimisation. This review evaluates ultrasound as a promising inline, non-invasive characterisation tool to address this crucial need. We critically examine decades of developments and applications in ultrasonic evaluation techniques, assessing their relevance and identifying challenges specific to the high-concentration, non-Newtonian battery slurries. Key wave-slurry interaction mechanisms, including attenuation, wave speed, scattering, and guided wave propagation, are discussed in the context of characterising microstructural features (e.g. particle dispersion and agglomeration) and macroscopic rheological properties (e.g. viscosity and viscoelasticity). To make full use of the crucial yet limited information accessible via ultrasound, we propose a hybrid framework marrying ultrasonic and other offline data through physics-informed machine learning for accurate and comprehensive property estimation. With the analyses and framework, this review points to a clear path towards achieving robust inline monitoring and efficient optimisation of battery slurry mixing.
- 14 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTowards Inline Ultrasonic Characterisation of Battery Slurry Mixing: Opportunities, Challenges, and Perspectives
Inefficiencies in the slurry mixing stage are a major factor in high scrap rates in battery manufacturing, thus hindering sustainable production. Current offline characterisation techniques for slurry microstructure and rheology are slow and inadequate for closed-loop quality control or process optimisation. This review evaluates ultrasound as a promising inline, non-invasive characterisation tool to address this crucial need. We critically examine decades of developments and applications in ultrasonic evaluation techniques, assessing their relevance and identifying challenges specific to the high-concentration, non-Newtonian battery slurries. Key wave-slurry interaction mechanisms, including attenuation, wave speed, scattering, and guided wave propagation, are discussed in the context of characterising microstructural features (e.g. particle dispersion and agglomeration) and macroscopic rheological properties (e.g. viscosity and viscoelasticity). To make full use of the crucial yet limited information accessible via ultrasound, we propose a hybrid framework marrying ultrasonic and other offline data through physics-informed machine learning for accurate and comprehensive property estimation. With the analyses and framework, this review points to a clear path towards achieving robust inline monitoring and efficient optimisation of battery slurry mixing.