Christoph Schmüdderich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christoph Schmüdderich has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Torsten Wichtmann
Ruhr-Universität Bochum
7 shared publications - Franz Tschuchnigg
Graz University of Technology
3 shared publications - Jan Machaček
Department of Civil and Environmental Engineering, Institute of Geotechnics, Technische Universität Darmstadt, Darmstadt, Germany
3 shared publications - Luis Felipe Prada-Sarmiento
Department of Civil and Architectural Engineering, Aarhus University, Aarhus, Denmark
3 shared publications - Arash Alimardani Lavasan
Research Group Computational Soil Mechanics and Foundation Engineering (COMPSOIL), Department of Engineering, Faculty of Science, Technology and Medicine University of Luxembourg Luxembourg Luxembourg
2 shared publications - Chenyang Zhao
Sun Yat-sen University
2 shared publications
Latest Publications
- Open Access
- 18 November 2024
- Published by Springer Nature in Acta Geotechnica
- Vol. 20 (1) , 303-322
A two-step dynamic FEM-FELA approach for seismic slope stability assessment
The determination of the factor of safety (FoS) of slopes during seismic excitation can be complex if the relevant effects of pore water pressure accumulation, nonlinear material response and variable shear strength are duly accounted for. A rational two-step approach to tackle this task based on a hydro-mechanically coupled dynamic simulation and finite element limit analyses is henceforth introduced. To ensure accurate transfer of the hydro-mechanical soil state, a mapping concept is presented, accounting for spatial distributions of stresses, excess pore water pressures, inertial forces and shear strength. The proposed approach is compared to limit equilibrium method (LEM) for the case of a large-scale water-saturated open cast mine slope subjected to seismic loading. In comparison with LEM, the new approach to assess seismic slope stability proves to be simpler in its implementation and straightforward, which could be an important asset for practitioners.
- 18 November 2024
- Published by Springer Nature in Acta Geotechnica
- Vol. 20 (1) , 303-322
Open AccessA two-step dynamic FEM-FELA approach for seismic slope stability assessment
The determination of the factor of safety (FoS) of slopes during seismic excitation can be complex if the relevant effects of pore water pressure accumulation, nonlinear material response and variable shear strength are duly accounted for. A rational two-step approach to tackle this task based on a hydro-mechanically coupled dynamic simulation and finite element limit analyses is henceforth introduced. To ensure accurate transfer of the hydro-mechanical soil state, a mapping concept is presented, accounting for spatial distributions of stresses, excess pore water pressures, inertial forces and shear strength. The proposed approach is compared to limit equilibrium method (LEM) for the case of a large-scale water-saturated open cast mine slope subjected to seismic loading. In comparison with LEM, the new approach to assess seismic slope stability proves to be simpler in its implementation and straightforward, which could be an important asset for practitioners.
- Open Access
- 5 February 2024
- Published by MDPI AG in Geosciences
- Vol. 14 (2) , 44
Influence of Sampling Methods on the Accuracy of Machine Learning Predictions Used for Strain-Dependent Slope Stability
Supervised machine learning (ML) techniques have been widely used in various geotechnical applications. While much attention is given to the ML techniques and the specific geotechnical problem being addressed, the influence of sampling methods on ML performance has received relatively less scrutiny. This study applies supervised ML to the strain-dependent slope stability (SDSS) method for the prediction of the factor of safety (FoS) using hypoplasticity. It delves into different sampling strategies for training the ML model, emphasizing predictions of soil behavior in lower stress ranges. A novel sampling method is introduced to ensure a more representative distribution of samples in these ranges, which is challenging to achieve through traditional sampling approaches. The ML models were trained using traditional and modified sampling methods. Subsequently, slope stability analyses using SDSS were conducted with ML models trained from six different sampling methods. The results illustrate the impact of sampling methods on the FoS. Besides a noticeable improvement in predictions of shear stresses within the lower stress ranges, a decisive effect on the overall FoS was observed as well.
- 5 February 2024
- Published by MDPI AG in Geosciences
- Vol. 14 (2) , 44
Open AccessInfluence of Sampling Methods on the Accuracy of Machine Learning Predictions Used for Strain-Dependent Slope Stability
Supervised machine learning (ML) techniques have been widely used in various geotechnical applications. While much attention is given to the ML techniques and the specific geotechnical problem being addressed, the influence of sampling methods on ML performance has received relatively less scrutiny. This study applies supervised ML to the strain-dependent slope stability (SDSS) method for the prediction of the factor of safety (FoS) using hypoplasticity. It delves into different sampling strategies for training the ML model, emphasizing predictions of soil behavior in lower stress ranges. A novel sampling method is introduced to ensure a more representative distribution of samples in these ranges, which is challenging to achieve through traditional sampling approaches. The ML models were trained using traditional and modified sampling methods. Subsequently, slope stability analyses using SDSS were conducted with ML models trained from six different sampling methods. The results illustrate the impact of sampling methods on the FoS. Besides a noticeable improvement in predictions of shear stresses within the lower stress ranges, a decisive effect on the overall FoS was observed as well.
- 11 October 2022
- Published by Elsevier in Computers and Geotechnics
- Vol. 152
Strain-dependent slope stability for earthquake loading
- 11 October 2022
- Published by Elsevier in Computers and Geotechnics
- Vol. 152
Strain-dependent slope stability for earthquake loading
- Open Access
- 21 May 2021
- Published by Springer Nature in Acta Geotechnica
- Vol. 17 (1) , 81-92
Significance of flow rule for the passive earth pressure problem
Determination of earth pressures is one of the fundamental tasks in geotechnical engineering. Although many different methods have been utilized to present passive earth pressure coefficients, the influence of non-associated plasticity on the passive earth pressure problem has not been discussed intensively. In this study, finite-element limit analysis and displacement finite-element analysis are applied for frictional materials. Results are compared with selected data from literature in terms of passive earth pressure coefficients, shape of failure mechanism and robustness of the numerical simulation. The results of this study show that passive earth pressure coefficients determined with an associated flow rule are comparable to the Sokolovski solution. However, comparison with a non-associated flow rule reveals that passive earth pressure coefficients are significantly over predicted when following an associated flow rule. Moreover, this study reveals that computational costs for determination of passive earth pressure are considerably larger following a non-associated flow rule. Additionally, the study shows that numerical instabilities arise and failure surfaces become non-unique. It is shown that this problem may be overcome by applying the approach suggested by Davis (Soil Mech 341–354, 1968).
- 21 May 2021
- Published by Springer Nature in Acta Geotechnica
- Vol. 17 (1) , 81-92
Open AccessSignificance of flow rule for the passive earth pressure problem
Determination of earth pressures is one of the fundamental tasks in geotechnical engineering. Although many different methods have been utilized to present passive earth pressure coefficients, the influence of non-associated plasticity on the passive earth pressure problem has not been discussed intensively. In this study, finite-element limit analysis and displacement finite-element analysis are applied for frictional materials. Results are compared with selected data from literature in terms of passive earth pressure coefficients, shape of failure mechanism and robustness of the numerical simulation. The results of this study show that passive earth pressure coefficients determined with an associated flow rule are comparable to the Sokolovski solution. However, comparison with a non-associated flow rule reveals that passive earth pressure coefficients are significantly over predicted when following an associated flow rule. Moreover, this study reveals that computational costs for determination of passive earth pressure are considerably larger following a non-associated flow rule. Additionally, the study shows that numerical instabilities arise and failure surfaces become non-unique. It is shown that this problem may be overcome by applying the approach suggested by Davis (Soil Mech 341–354, 1968).
- 1 September 2020
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 369
Stochastic field simulation of slope stability problems: Improvement and reduction of computational effort
- 1 September 2020
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 369
Stochastic field simulation of slope stability problems: Improvement and reduction of computational effort
- 1 September 2020
- Published by Elsevier in Computers and Geotechnics
- Vol. 125
Strategies for numerical simulation of cast-in-place piles under axial loading
- 1 September 2020
- Published by Elsevier in Computers and Geotechnics
- Vol. 125
Strategies for numerical simulation of cast-in-place piles under axial loading
- 1 June 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 146 (6)
Behavior of Nonidentical Differently Loaded Interfering Rough Footings
- 1 June 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 146 (6)
Behavior of Nonidentical Differently Loaded Interfering Rough Footings
- 1 June 2020
- Published by Emerald Publishing in Géotechnique Letters
- Vol. 10 (2) , 100-105
Rigorous lower and upper bounds for the 3D passive earth pressure problem
With the advent of advanced numerical methods, the three-dimensional (3D) passive earth pressure problem has received increasing attention within the last two decades. However, narrow brackets for the exact solution obtained via lower and upper bound simulations have not been presented. In this study, finite-element limit analysis is utilised to determine rigorous bounds for the 3D passive earth pressure problem. A parametric study accounting for different wall geometries, friction angles and wall friction ratios is performed and results are presented in terms of lateral earth pressure coefficient, Kpγh. The results of the lower and upper bound analyses show that in all analysed cases, the exact solution is bracketed within a very narrow range. Furthermore, comparison with existing approaches reveals that, in general, a good agreement is achieved between the current results with data from literature. Furthermore, both lower and upper bound have been improved, especially for narrow geometries, large friction angles and large wall friction ratios.
- 1 June 2020
- Published by Emerald Publishing in Géotechnique Letters
- Vol. 10 (2) , 100-105
Rigorous lower and upper bounds for the 3D passive earth pressure problem
With the advent of advanced numerical methods, the three-dimensional (3D) passive earth pressure problem has received increasing attention within the last two decades. However, narrow brackets for the exact solution obtained via lower and upper bound simulations have not been presented. In this study, finite-element limit analysis is utilised to determine rigorous bounds for the 3D passive earth pressure problem. A parametric study accounting for different wall geometries, friction angles and wall friction ratios is performed and results are presented in terms of lateral earth pressure coefficient, Kpγh. The results of the lower and upper bound analyses show that in all analysed cases, the exact solution is bracketed within a very narrow range. Furthermore, comparison with existing approaches reveals that, in general, a good agreement is achieved between the current results with data from literature. Furthermore, both lower and upper bound have been improved, especially for narrow geometries, large friction angles and large wall friction ratios.
- Open Access
- 1 February 2020
- Published by Elsevier in Soils and Foundations
- Vol. 60 (1) , 229-238
Bearing capacity of a strip footing placed next to an existing footing on frictional soil
- 1 February 2020
- Published by Elsevier in Soils and Foundations
- Vol. 60 (1) , 229-238
Open AccessBearing capacity of a strip footing placed next to an existing footing on frictional soil
- 1 November 2019
- Published by Elsevier in Computers and Geotechnics
- Vol. 115
Response of building to shallow tunnel excavation in different types of soil
- 1 November 2019
- Published by Elsevier in Computers and Geotechnics
- Vol. 115
Response of building to shallow tunnel excavation in different types of soil