Iryna Bernyk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Iryna Bernyk has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Nazarenko
Kyiv National University of Construction and Architecture
12 shared publications - N. V. Novgorodska
Vinnytsia National Agrarian University
9 shared publications - Oleg Dedov
Kyiv National University of Construction and Architecture
5 shared publications - Oleksandr Luhovskyi
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
5 shared publications - Ivan Kots4 shared publications
- Alla Solomon
Vinnytsia National Agrarian University
3 shared publications
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Application of additive technologies in the construction of energy-efficient buildings with a positive energy balance
The article is dedicated to the development of additive technologies, using 3D frames from concrete bags, for the formation of energy-efficient housing structures with a positive energy balance. The advantages of lining 3D-laminated shells with highly efficient thermal insulation materials (PU, ecowool, mineral wool, EPS) in the context of reduced heat loss, increased energy efficiency and fluidity wakefulness. A three-tier research methodology is described - laboratory testing, digital modeling (Revit, Rhinoceros, Grasshopper, Energy Plus) and implementation on a real everyday life with the parameters of the future. The robot examines current approaches to the development of modern 3D technology as one of the promising directions for the post-war renovation of the housing stock of Ukraine. It has been shown that the use of additive technologies makes it possible to significantly speed up the work cycle, reduce the wastage of materials, increase the level of automation of everyday processes and ensure flexibility architectural and planning solutions. Particular attention is paid to ensuring energy efficiency through the integration of thermal insulation materials into the structure of 3D-laminated wall elements, as well as the integration of structural systems from renewed energy sources. The results of the study of the optimal technological parameters of 3D frames, the terms of pressing concrete mixes for 3DPC, the thermal insulation characteristics of wall elements, the modeling of the generation of electrical energy from solar panels are presented. Power station with a varied number of solar panels, technical and economic efficiency of 3D technology compared to traditional technology. Optimal parameters for the hand process have been established, ranging from the relationship between the height of the ball and the diameter of the printer nozzle, the fluidity of the hand and the characteristics of inter-ball adhesion. The results of experimental studies of thermal insulation authorities of various types of insulation materials were compiled and the most effective design solutions were identified to meet the Energy+.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessApplication of additive technologies in the construction of energy-efficient buildings with a positive energy balance
The article is dedicated to the development of additive technologies, using 3D frames from concrete bags, for the formation of energy-efficient housing structures with a positive energy balance. The advantages of lining 3D-laminated shells with highly efficient thermal insulation materials (PU, ecowool, mineral wool, EPS) in the context of reduced heat loss, increased energy efficiency and fluidity wakefulness. A three-tier research methodology is described - laboratory testing, digital modeling (Revit, Rhinoceros, Grasshopper, Energy Plus) and implementation on a real everyday life with the parameters of the future. The robot examines current approaches to the development of modern 3D technology as one of the promising directions for the post-war renovation of the housing stock of Ukraine. It has been shown that the use of additive technologies makes it possible to significantly speed up the work cycle, reduce the wastage of materials, increase the level of automation of everyday processes and ensure flexibility architectural and planning solutions. Particular attention is paid to ensuring energy efficiency through the integration of thermal insulation materials into the structure of 3D-laminated wall elements, as well as the integration of structural systems from renewed energy sources. The results of the study of the optimal technological parameters of 3D frames, the terms of pressing concrete mixes for 3DPC, the thermal insulation characteristics of wall elements, the modeling of the generation of electrical energy from solar panels are presented. Power station with a varied number of solar panels, technical and economic efficiency of 3D technology compared to traditional technology. Optimal parameters for the hand process have been established, ranging from the relationship between the height of the ball and the diameter of the printer nozzle, the fluidity of the hand and the characteristics of inter-ball adhesion. The results of experimental studies of thermal insulation authorities of various types of insulation materials were compiled and the most effective design solutions were identified to meet the Energy+.
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (140)) , 25-34
Substantiating the design of equipment for preparing oil and gas field products for transportation
This study investigates processes that separate gas-liquid flows and purify formation water in the equipment for oil and gas field production preparation units. At the late stage of field development, the efficiency of separation depends on the ability of the equipment to operate under conditions of waterlogging, an increase in the content of mechanical impurities, and a decrease in formation pressure. Under such conditions, conventional separation equipment does not provide the required quality of hydrocarbon separation and purification of formation water. The task addressed in this work has been solved by improving the internal structural elements in the three-phase separator and a cyclone in the hydrocarbon preparation unit. Hydraulic losses were within permissible values; no secondary removal of drops into the gas stream occurred. That was confirmed by the results of thermodynamic and CFD modeling. This is a feature of the approach in comparison with those reported in which studies of new design solutions were not comprehensively conducted. The issues of hydraulic losses and secondary removal of drops into the gas stream remained open. The design solutions proposed in this work affected the separation efficiency – the volume of the selected condensate increased while the total hydraulic losses did not exceed 0.037 MPa. It has been proven that new structural solutions for separation elements provide a more uniform distribution of speeds and form local zones with reduced speeds. The results are explained by a change in the flow structure, an increase in inertial deposition of drops, and a decrease in low-mobility zones in the flow part of the separation elements. The findings could be implemented in the reconstruction of oil and gas treatment plants, in the design of internal separation elements, and when choosing structural solutions for cyclones in order to purify formation water
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (140)) , 25-34
Open AccessSubstantiating the design of equipment for preparing oil and gas field products for transportation
This study investigates processes that separate gas-liquid flows and purify formation water in the equipment for oil and gas field production preparation units. At the late stage of field development, the efficiency of separation depends on the ability of the equipment to operate under conditions of waterlogging, an increase in the content of mechanical impurities, and a decrease in formation pressure. Under such conditions, conventional separation equipment does not provide the required quality of hydrocarbon separation and purification of formation water. The task addressed in this work has been solved by improving the internal structural elements in the three-phase separator and a cyclone in the hydrocarbon preparation unit. Hydraulic losses were within permissible values; no secondary removal of drops into the gas stream occurred. That was confirmed by the results of thermodynamic and CFD modeling. This is a feature of the approach in comparison with those reported in which studies of new design solutions were not comprehensively conducted. The issues of hydraulic losses and secondary removal of drops into the gas stream remained open. The design solutions proposed in this work affected the separation efficiency – the volume of the selected condensate increased while the total hydraulic losses did not exceed 0.037 MPa. It has been proven that new structural solutions for separation elements provide a more uniform distribution of speeds and form local zones with reduced speeds. The results are explained by a change in the flow structure, an increase in inertial deposition of drops, and a decrease in low-mobility zones in the flow part of the separation elements. The findings could be implemented in the reconstruction of oil and gas treatment plants, in the design of internal separation elements, and when choosing structural solutions for cyclones in order to purify formation water
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (1(88)) , 6-16
Determination of force and energy parameters in impact fracture processes of materials of various strengths and rheology properties
The object of research is the processes of impact fracture of materials of different strengths and rheological properties. The problem of determining the force and energy parameters remains the lack of a generally accepted model of the processes of fracture of materials of different strengths and their rheological properties. In most crushing machines in the crushing chamber, the destruction of materials is accompanied by impact loads or is generally shock (impact crushers). The work includes studies of material destruction using the example of granite. The analysis of Johnson-Holmquist models was carried out, according to the plastic fracture model, which is designed to model the behavior of brittle materials, according to the fracture model of porous materials, especially concretes, which are subjected to large deformations, high strain rates and high pressure. It was found that during impact loading, maximum stresses arise on the impact surface, and also spread along the beam to the inner edges of the supports. The difference between the internal and kinetic energies for the JH2 body was 9.2 J, while for the JH1 body it was 15.3 J. The study on the pendulum impactor allowed to estimate the energy spent on the fracture of the material sample. It was established that if the crack crosses the intergranular boundary due to the action of local stress concentration, new cracks appear in the corresponding cleavage planes of neighboring grains, which require additional energy input to the sample. To estimate the dissipated energy in the fracture process, it was proposed to introduce an appropriate resistance coefficient. Based on experimental data, the resistance coefficient value was established for various rocks. The obtained research results can be used in the development and study of equipment for crushing materials. The value of the specific fracture energy can be used to study dynamic processes in building structures under excessive loads.
- 30 April 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (1(88)) , 6-16
Open AccessDetermination of force and energy parameters in impact fracture processes of materials of various strengths and rheology properties
The object of research is the processes of impact fracture of materials of different strengths and rheological properties. The problem of determining the force and energy parameters remains the lack of a generally accepted model of the processes of fracture of materials of different strengths and their rheological properties. In most crushing machines in the crushing chamber, the destruction of materials is accompanied by impact loads or is generally shock (impact crushers). The work includes studies of material destruction using the example of granite. The analysis of Johnson-Holmquist models was carried out, according to the plastic fracture model, which is designed to model the behavior of brittle materials, according to the fracture model of porous materials, especially concretes, which are subjected to large deformations, high strain rates and high pressure. It was found that during impact loading, maximum stresses arise on the impact surface, and also spread along the beam to the inner edges of the supports. The difference between the internal and kinetic energies for the JH2 body was 9.2 J, while for the JH1 body it was 15.3 J. The study on the pendulum impactor allowed to estimate the energy spent on the fracture of the material sample. It was established that if the crack crosses the intergranular boundary due to the action of local stress concentration, new cracks appear in the corresponding cleavage planes of neighboring grains, which require additional energy input to the sample. To estimate the dissipated energy in the fracture process, it was proposed to introduce an appropriate resistance coefficient. Based on experimental data, the resistance coefficient value was established for various rocks. The obtained research results can be used in the development and study of equipment for crushing materials. The value of the specific fracture energy can be used to study dynamic processes in building structures under excessive loads.
- Open Access
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 154
MODELING THE INFLUENCE OF ULTRASONIC CAVITATION MODES ON THE QUALITY OF THE FAT PHASE IN HEMP-BASED BEVERAGE TECHNOLOGY
The relevance of this study is determined by the need to control sonochemical processes in order to prevent excessive oxidative reactions in the lipid phase during ultrasonic stabilization of dispersed systems based on hemp seeds. It is well known that ultrasonic treatment can simultaneously enhance dispersion and intensify oxidation processes, which may negatively affect the quality of the final product. The chemical stability of the lipid phase is one of the key indicators of the quality of plant-based beverages, particularly in terms of total oxidation. The aim of the study is to develop a mathematical model describing the influence of ultrasonic processing parameters on the total oxidation index of the lipid phase of an emulsion obtained from hemp seeds of the Glesia variety. To achieve this objective, a full-factorial experimental design of the 2³ type based on the Box–Wilson method was applied, which enabled the derivation of quadratic regression equations. The main factors considered in the study were ultrasonic power, specific energy input, and medium temperature. The adequacy of the developed model was verified using the Fisher criterion, confirming its statistical reliability and predictive capability. The results indicate that temperature is the most significant factor affecting the oxidation intensity, while ultrasonic power has the least relative influence within the studied parameter range. It was established that the total oxidation index does not exceed 10 units, which meets the requirements for high-quality lipid phases and indicates the absence of critical degradation processes. Rational ranges of ultrasonic processing parameters were determined, ensuring an optimal balance between the stability of the dispersed system and the preservation of lipid phase quality, namely a temperature range of 26–35 °C and a specific energy input of 200–350 kJ/kg. The obtained results can be used to substantiate technological regimes for the production of plant-based beverages from hemp seeds, predict their shelf life, and improve the efficiency of food processing technologies.
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 154
Open AccessMODELING THE INFLUENCE OF ULTRASONIC CAVITATION MODES ON THE QUALITY OF THE FAT PHASE IN HEMP-BASED BEVERAGE TECHNOLOGY
The relevance of this study is determined by the need to control sonochemical processes in order to prevent excessive oxidative reactions in the lipid phase during ultrasonic stabilization of dispersed systems based on hemp seeds. It is well known that ultrasonic treatment can simultaneously enhance dispersion and intensify oxidation processes, which may negatively affect the quality of the final product. The chemical stability of the lipid phase is one of the key indicators of the quality of plant-based beverages, particularly in terms of total oxidation. The aim of the study is to develop a mathematical model describing the influence of ultrasonic processing parameters on the total oxidation index of the lipid phase of an emulsion obtained from hemp seeds of the Glesia variety. To achieve this objective, a full-factorial experimental design of the 2³ type based on the Box–Wilson method was applied, which enabled the derivation of quadratic regression equations. The main factors considered in the study were ultrasonic power, specific energy input, and medium temperature. The adequacy of the developed model was verified using the Fisher criterion, confirming its statistical reliability and predictive capability. The results indicate that temperature is the most significant factor affecting the oxidation intensity, while ultrasonic power has the least relative influence within the studied parameter range. It was established that the total oxidation index does not exceed 10 units, which meets the requirements for high-quality lipid phases and indicates the absence of critical degradation processes. Rational ranges of ultrasonic processing parameters were determined, ensuring an optimal balance between the stability of the dispersed system and the preservation of lipid phase quality, namely a temperature range of 26–35 °C and a specific energy input of 200–350 kJ/kg. The obtained results can be used to substantiate technological regimes for the production of plant-based beverages from hemp seeds, predict their shelf life, and improve the efficiency of food processing technologies.
- Open Access
- 30 October 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (137)) , 55-65
Determining the rational energy level for processing environments of different structures
Vibration processing underlies many technological processes in various sectors of the national economy. The object of the study is a single common wave process of motion of the system, and the subject is the parameters and modes that provide a rational level of energy. At the same time, attention is focused on the use of energy-saving technologies. Most processes use energy-consuming technologies and equipment, the calculations of which are based on the application of formulas for determining energy on discrete and empirical dependencies. Such approaches do not reveal the essence of the material processing processes and cannot accurately estimate energy costs. This problem is solved in the work by determining the parameters and modes based on the conditions for implementing the synergy of the “vibration exciter – processing medium” system. This is the peculiarity and difference of the obtained research results. Discrete-continuous models have been developed taking into account the rheological properties of the media, and analytical solutions and experimental studies have allowed to determine the parameters of low-frequency and high-frequency actions on the processing medium. The work uses a method by which the combination of frequency and amplitude of vibrations determines the intensity of the vibration effect on the processing environment. The resistance of the technological environment to the movement of the working body of the vibration exciter, which consisted of inertial, elastic and dissipative parts, was determined. The study determined the qualitative and quantitative picture of the change in energy dissipation in specific materials and environments under different laws of their loading and processing. The energy level for processing technological environments in low-frequency and high-frequency modes was determined. The research methodology and analytical dependence of energy determination can be used for various environments under load
- 30 October 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (137)) , 55-65
Open AccessDetermining the rational energy level for processing environments of different structures
Vibration processing underlies many technological processes in various sectors of the national economy. The object of the study is a single common wave process of motion of the system, and the subject is the parameters and modes that provide a rational level of energy. At the same time, attention is focused on the use of energy-saving technologies. Most processes use energy-consuming technologies and equipment, the calculations of which are based on the application of formulas for determining energy on discrete and empirical dependencies. Such approaches do not reveal the essence of the material processing processes and cannot accurately estimate energy costs. This problem is solved in the work by determining the parameters and modes based on the conditions for implementing the synergy of the “vibration exciter – processing medium” system. This is the peculiarity and difference of the obtained research results. Discrete-continuous models have been developed taking into account the rheological properties of the media, and analytical solutions and experimental studies have allowed to determine the parameters of low-frequency and high-frequency actions on the processing medium. The work uses a method by which the combination of frequency and amplitude of vibrations determines the intensity of the vibration effect on the processing environment. The resistance of the technological environment to the movement of the working body of the vibration exciter, which consisted of inertial, elastic and dissipative parts, was determined. The study determined the qualitative and quantitative picture of the change in energy dissipation in specific materials and environments under different laws of their loading and processing. The energy level for processing technological environments in low-frequency and high-frequency modes was determined. The research methodology and analytical dependence of energy determination can be used for various environments under load
- Open Access
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (131)) , 34-43
Identifying the parameters and operation modes of the cavitation apparatus taking into account the influence of the processing material
The object of this study is dynamic pressure that takes into account the main parameters of technological process. Under real conditions of cavitation apparatus operation, a discrepancy between actual and calculated parameters of 30–50 % was found, which significantly reduces the efficiency and quality of material processing. The problem was solved through a joint study of the movement of the acoustic apparatus and the technological environment as a single structured system taking into account the influence of materials. This is a peculiarity of the approach and distinctive features of the results in comparison with existing ones, in which the research was conducted separately for the processing material and the cavitation apparatus. The model proposed in the work reflects the elastic, inertial, and dissipative parameters in the equations of motion, provided that their changes are taken into account, both in the acoustic apparatus and in the technological material. This approach has made it possible to reveal the physical essence of the interaction and analytically describe their joint movement. The resulting analytical dependences made it possible to calculate and propose numerical values of vibration amplitudes in the range of 4.0...20.0 μm, sound pressure values in the range of 5.0...30.0∙105 Pa for media with a viscosity of (10–200)∙10-3 Pa∙s. With the set value of the amplitude, it is possible to assign the necessary parameters for the implementation of the cavitation process. The developed calculation algorithm ensures the reliability of the accepted models and parameters of the cavitation apparatus. The proposed approach of joint study of the movement of the acoustic apparatus and the environment is expedient to use for the practical implementation of ultrasonic treatment. In particular, such processes as dispersion, emulsification, mixing, extraction, and others, in order to increase their efficiency
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (131)) , 34-43
Open AccessIdentifying the parameters and operation modes of the cavitation apparatus taking into account the influence of the processing material
The object of this study is dynamic pressure that takes into account the main parameters of technological process. Under real conditions of cavitation apparatus operation, a discrepancy between actual and calculated parameters of 30–50 % was found, which significantly reduces the efficiency and quality of material processing. The problem was solved through a joint study of the movement of the acoustic apparatus and the technological environment as a single structured system taking into account the influence of materials. This is a peculiarity of the approach and distinctive features of the results in comparison with existing ones, in which the research was conducted separately for the processing material and the cavitation apparatus. The model proposed in the work reflects the elastic, inertial, and dissipative parameters in the equations of motion, provided that their changes are taken into account, both in the acoustic apparatus and in the technological material. This approach has made it possible to reveal the physical essence of the interaction and analytically describe their joint movement. The resulting analytical dependences made it possible to calculate and propose numerical values of vibration amplitudes in the range of 4.0...20.0 μm, sound pressure values in the range of 5.0...30.0∙105 Pa for media with a viscosity of (10–200)∙10-3 Pa∙s. With the set value of the amplitude, it is possible to assign the necessary parameters for the implementation of the cavitation process. The developed calculation algorithm ensures the reliability of the accepted models and parameters of the cavitation apparatus. The proposed approach of joint study of the movement of the acoustic apparatus and the environment is expedient to use for the practical implementation of ultrasonic treatment. In particular, such processes as dispersion, emulsification, mixing, extraction, and others, in order to increase their efficiency
- Open Access
- 7 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 26-34
Technology of the boiled-smoked sausage products is for the use of side foods of processing of oil-bearing production
The article examines the issue of expanding the assortment of sausage products with a combined composition of raw materials, using dietary fibers with functional and technological properties that stabilize the quality of meat raw materials to create products with a functional purpose. Enriching meat products with dietary fibers is advisable to achieve specific technological goals in physiologically significant quantities. Pumpkin seed processing products are characterized as gluten-free; their use is relevant for enriching finished products with a vitamin-mineral complex. Fiber from industrial hemp seeds is a by-product of oil production and a unique source of protein, natural carotene, phytosterols, and phospholipids. The recipe and production technology of cooked-smoked sausage products with a combined composition of raw materials has been experimentally confirmed. It was established that using hydrated fiber from hemp seeds and pumpkin seeds in the recipe of sausage products improves structural and mechanical characteristics, has high organoleptic indicators, and ensures the production of a product of increased biological and nutritional value. Food additives of vegetable origin give sausage products an appetizing appearance, proper texture and consistency, and appropriate taste while significantly reducing their production cost. With the optimal selection of the recipe, food supplements of plant origin allow you to balance products from the point of view of nutrition. The best results are a complex of characteristics for using a hydrated hemp and pumpkin seed fiber mixture. The technology aims to solve the problem of expanding the range of meat products for mass consumption with increased nutritional value. Enrichment of sausage products with fiber from pumpkin seeds and industrial hemp helps improve the products' functional properties. It ensures the formation of the necessary structural and mechanical properties. Using processed products of pumpkin seeds and industrial hemp as raw materials for sausage production solves the food industry's resource conservation problem. Досліджено питання розширення асортименту ковбасних виробів з комбінованим складом сировини, за використання харчових волокон з функціонально-технологічними властивостями, які стабілізують якість м’ясної сировини, для створення продуктів функціонального призначення. Збагачення м’ясних продуктів харчовими волокнами доцільне у фізіологічно значущих кількостях та для досягнення конкретних технологічних цілей. Продукти переробки насіння гарбуза характеризують як безглютенові, їх використання є актуальним для збагачення готової продукції вітамінно-мінеральним комплексом. Клітковина з насіння промислових конопель – побічний продукт виробництва олії, унікальне джерело протеїну, натурального каротину, фітостеролів і фосфоліпідів. Експериментально підтверджено рецептуру та технологію виробництва варено-копчених ковбасних виробів з комбінованим складом сировини. Встановлено, що використання гідратованої клітковини з насіння конопель та насіння гарбуза в рецептурі ковбасних виробів забезпечує поліпшення структурно-механічних характеристик, має високі органолептичні показники, забезпечує виробництво продукту підвищеної біологічної та харчової цінності. Харчові добавки рослинного походження надають ковбасним виробам апетитного вигляду, належної текстури й консистенції, відповідного смаку за суттєвого здешевлення їх виробництва. За оптимального підбору рецептури харчові добавки рослинного походження дозволяють збалансувати продукти з точки зору поживності. Найкращі результати за комплексом ознак за використання гідратованої суміші клітковини насіння конопель та насіння гарбуза. Технологія спрямована на вирішення проблеми розширення асортименту м’ясних виробів масового споживання підвищеної харчової цінності. Збагачення ковбасних виробів клітковиною з насіння гарбуза та промислових конопель сприяє поліпшенню функціональних властивостей продукції та забезпечує формування необхідних структурно-механічних властивостей. Використання продуктів переробки насіння гарбуза та промислових конопель як сировини ковбасного виробництва забезпечує вирішення...
- 7 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 26-34
Open AccessTechnology of the boiled-smoked sausage products is for the use of side foods of processing of oil-bearing production
The article examines the issue of expanding the assortment of sausage products with a combined composition of raw materials, using dietary fibers with functional and technological properties that stabilize the quality of meat raw materials to create products with a functional purpose. Enriching meat products with dietary fibers is advisable to achieve specific technological goals in physiologically significant quantities. Pumpkin seed processing products are characterized as gluten-free; their use is relevant for enriching finished products with a vitamin-mineral complex. Fiber from industrial hemp seeds is a by-product of oil production and a unique source of protein, natural carotene, phytosterols, and phospholipids. The recipe and production technology of cooked-smoked sausage products with a combined composition of raw materials has been experimentally confirmed. It was established that using hydrated fiber from hemp seeds and pumpkin seeds in the recipe of sausage products improves structural and mechanical characteristics, has high organoleptic indicators, and ensures the production of a product of increased biological and nutritional value. Food additives of vegetable origin give sausage products an appetizing appearance, proper texture and consistency, and appropriate taste while significantly reducing their production cost. With the optimal selection of the recipe, food supplements of plant origin allow you to balance products from the point of view of nutrition. The best results are a complex of characteristics for using a hydrated hemp and pumpkin seed fiber mixture. The technology aims to solve the problem of expanding the range of meat products for mass consumption with increased nutritional value. Enrichment of sausage products with fiber from pumpkin seeds and industrial hemp helps improve the products' functional properties. It ensures the formation of the necessary structural and mechanical properties. Using processed products of pumpkin seeds and industrial hemp as raw materials for sausage production solves the food industry's resource conservation problem. Досліджено питання розширення асортименту ковбасних виробів з комбінованим складом сировини, за використання харчових волокон з функціонально-технологічними властивостями, які стабілізують якість м’ясної сировини, для створення продуктів функціонального призначення. Збагачення м’ясних продуктів харчовими волокнами доцільне у фізіологічно значущих кількостях та для досягнення конкретних технологічних цілей. Продукти переробки насіння гарбуза характеризують як безглютенові, їх використання є актуальним для збагачення готової продукції вітамінно-мінеральним комплексом. Клітковина з насіння промислових конопель – побічний продукт виробництва олії, унікальне джерело протеїну, натурального каротину, фітостеролів і фосфоліпідів. Експериментально підтверджено рецептуру та технологію виробництва варено-копчених ковбасних виробів з комбінованим складом сировини. Встановлено, що використання гідратованої клітковини з насіння конопель та насіння гарбуза в рецептурі ковбасних виробів забезпечує поліпшення структурно-механічних характеристик, має високі органолептичні показники, забезпечує виробництво продукту підвищеної біологічної та харчової цінності. Харчові добавки рослинного походження надають ковбасним виробам апетитного вигляду, належної текстури й консистенції, відповідного смаку за суттєвого здешевлення їх виробництва. За оптимального підбору рецептури харчові добавки рослинного походження дозволяють збалансувати продукти з точки зору поживності. Найкращі результати за комплексом ознак за використання гідратованої суміші клітковини насіння конопель та насіння гарбуза. Технологія спрямована на вирішення проблеми розширення асортименту м’ясних виробів масового споживання підвищеної харчової цінності. Збагачення ковбасних виробів клітковиною з насіння гарбуза та промислових конопель сприяє поліпшенню функціональних властивостей продукції та забезпечує формування необхідних структурно-механічних властивостей. Використання продуктів переробки насіння гарбуза та промислових конопель як сировини ковбасного виробництва забезпечує вирішення...
- Open Access
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 181-189
Іce cream with berry and vegetable filler
The article examines the issue of expanding the assortment of dairy products with a combined composition of raw materials, using the raw resources of wild and cultivated berries, vegetables. Subject. Pumpkin, actinidia, berry-vegetable filling, ice-cream. Purpose. Development of science-based technology for ice cream enriched with filler of vegetable origin. Method. Standard, commonly used and modified methods of research of physico-chemical and organoleptic indicators of plant raw materials were used to fulfill the tasks. Results. Ukraine has significant untapped resource potential, including raw material and industrial bases, for obtaining functional ingredients and improving the composition of food products. Despite the existing developments and intensive research in this field, the very issue of using natural functional ingredients is extremely relevant. Approaches to the production of ice cream with berry-vegetable filling are substantiated. The technology for preparing actinidia berries and pumpkin puree has been developed. According to the results of organoleptic studies, the ratio of the constituent components in the composition of the filler was established. According to the proposed production technology and the researched ratio of constituent components, the berry-vegetable filler has increased antioxidant activity. The antioxidant activity is quite high, which is related to the content of vitamin C in actinidia berries. The expediency of using a berry-vegetable filler in the production of ice cream, which helps to improve the quality of the finished product, has been theoretically substantiated and experimentally confirmed. The recipe and technology of new types of ice cream are proposed, taking into account the technological properties of the added ingredients. Scope of results. The conducted research can serve as a basis for expanding the assortment of ice cream and obtaining high-quality products.
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 181-189
Open AccessІce cream with berry and vegetable filler
The article examines the issue of expanding the assortment of dairy products with a combined composition of raw materials, using the raw resources of wild and cultivated berries, vegetables. Subject. Pumpkin, actinidia, berry-vegetable filling, ice-cream. Purpose. Development of science-based technology for ice cream enriched with filler of vegetable origin. Method. Standard, commonly used and modified methods of research of physico-chemical and organoleptic indicators of plant raw materials were used to fulfill the tasks. Results. Ukraine has significant untapped resource potential, including raw material and industrial bases, for obtaining functional ingredients and improving the composition of food products. Despite the existing developments and intensive research in this field, the very issue of using natural functional ingredients is extremely relevant. Approaches to the production of ice cream with berry-vegetable filling are substantiated. The technology for preparing actinidia berries and pumpkin puree has been developed. According to the results of organoleptic studies, the ratio of the constituent components in the composition of the filler was established. According to the proposed production technology and the researched ratio of constituent components, the berry-vegetable filler has increased antioxidant activity. The antioxidant activity is quite high, which is related to the content of vitamin C in actinidia berries. The expediency of using a berry-vegetable filler in the production of ice cream, which helps to improve the quality of the finished product, has been theoretically substantiated and experimentally confirmed. The recipe and technology of new types of ice cream are proposed, taking into account the technological properties of the added ingredients. Scope of results. The conducted research can serve as a basis for expanding the assortment of ice cream and obtaining high-quality products.
- Open Access
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 135-142
Evaluation of the quality of brynza cheese from a mixture of dairy raw materials
Natural cheeses are especially important for providing a person with complete nutrition. Cheeses are characterized by high nutritional value, since all the nutrients and biologically active substances of milk are contained in them in a concentrated form. Brynza is the most popular salted cheese in Ukraine. The quality of cheeses depends on many factors, but first of all, on the quality of raw materials. Milk from different types of farm and animals is used in cheese making. Salted cheeses are the high-quality protein food product with high organoleptic indicators, nutritional and biological value. The article substantiates the use of cow's and goat's milk and their mixtures in the production of cheese in order to improve its quality and expand the assortment of cheeses. The organoleptic and physicochemical parameters of raw milk were studied. Samples of cow's and goat's milk according to organic indicators meets to the current regulatory documentation. When preparing mixed compositions from milk, their chemical composition and physicochemical parameters were determined. The results showed that with increasing the amount of cow's milk in the mixture, the content of fat, protein, and dry skimmed milk decreases. According to the rennet sample, the raw material belongs to the 1st class and meets the requirements of syrupiness. It was established that all samples of cheese according to organoleptic indicators meet the requirements of DSTU and have high points according to the point system for evaluating cheeses. It was determined that cheese made from cow's milk has a more pleasant smell and taste, and cheese made from goat's milk has a better consistency. Brynza made from a mixture of cow's and goat's milk in a ratio of 50:50 had the best organoleptic indicators – a white color with a creamy shade, a slightly piquant taste of goat's milk and a salty taste without excessive odors and aromas. It was established that with an increase in the percentage of goat milk to 70 %, the aftertaste and aroma of goat milk was expressed too strongly. Натуральні сири є особливо важливими для забезпечення людини повноцінним харчуванням. Сири характеризуються високою харчовою цінністю, оскільки всі поживні та біологічно активні речовини молока містяться в них у концентрованому вигляді. Бринза є найпопулярнішим розсільним сиром в Україні. Якість сирів залежить від багатьох факторів, але насамперед – від якості сировини. У сироробстві використовується молоко різних видів сільськогосподарських тварин. Розсільні сири є високоякісним білковим харчовим продуктом, що мають високі органолептичні показники, харчову та біологічну цінність. У статті обґрунтовується використання коров’ячого і козиного молока та їх сумішей при виробництві бринзи з метою поліпшення її якості та розширення асортименту розсільних сирів. Вивчено органолептичні та фізико-хімічні показники молока-сировини. Зразки коров’ячого і козиного молока за органічними показниками відповідають діючій нормативній документації. При складанні сумішевих композицій з молока визначали їх хімічний склад та фізико-хімічні показники. Результати показали, що зі збільшенням кількості коров’ячого молока у суміші зменшується вміст жиру, білка, сухого знежиреного молочного залишку. Сировина за сичужною пробою належить до 1 класу і відповідає вимогам сиропридатності. Встановлено, що всі зразки бринзи за органолептичними показниками відповідають вимогам ДСТУ та мають високі бали за бальною системою оцінки сирів. Було визначено, що бринза, виготовлена з коров’ячого молока, має приємніший запах та присмак, а бринза з козиного молока має кращу консистенцію. Бринза, виготовлена з суміші коров’ячого та козиного молока в співвідношенні 50:50, мала найкращі органолептичні показники – білий колір з кремовим відтінком, слабо виражений пікантний присмак козиного молока та солонуватий смак без зайвих запахів та ароматів. Встановлено, що зі збільшенням відсоткової складової козиного молока до 70 % присмак та аромат козиного молока був виражений занадто сильно.
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 135-142
Open AccessEvaluation of the quality of brynza cheese from a mixture of dairy raw materials
Natural cheeses are especially important for providing a person with complete nutrition. Cheeses are characterized by high nutritional value, since all the nutrients and biologically active substances of milk are contained in them in a concentrated form. Brynza is the most popular salted cheese in Ukraine. The quality of cheeses depends on many factors, but first of all, on the quality of raw materials. Milk from different types of farm and animals is used in cheese making. Salted cheeses are the high-quality protein food product with high organoleptic indicators, nutritional and biological value. The article substantiates the use of cow's and goat's milk and their mixtures in the production of cheese in order to improve its quality and expand the assortment of cheeses. The organoleptic and physicochemical parameters of raw milk were studied. Samples of cow's and goat's milk according to organic indicators meets to the current regulatory documentation. When preparing mixed compositions from milk, their chemical composition and physicochemical parameters were determined. The results showed that with increasing the amount of cow's milk in the mixture, the content of fat, protein, and dry skimmed milk decreases. According to the rennet sample, the raw material belongs to the 1st class and meets the requirements of syrupiness. It was established that all samples of cheese according to organoleptic indicators meet the requirements of DSTU and have high points according to the point system for evaluating cheeses. It was determined that cheese made from cow's milk has a more pleasant smell and taste, and cheese made from goat's milk has a better consistency. Brynza made from a mixture of cow's and goat's milk in a ratio of 50:50 had the best organoleptic indicators – a white color with a creamy shade, a slightly piquant taste of goat's milk and a salty taste without excessive odors and aromas. It was established that with an increase in the percentage of goat milk to 70 %, the aftertaste and aroma of goat milk was expressed too strongly. Натуральні сири є особливо важливими для забезпечення людини повноцінним харчуванням. Сири характеризуються високою харчовою цінністю, оскільки всі поживні та біологічно активні речовини молока містяться в них у концентрованому вигляді. Бринза є найпопулярнішим розсільним сиром в Україні. Якість сирів залежить від багатьох факторів, але насамперед – від якості сировини. У сироробстві використовується молоко різних видів сільськогосподарських тварин. Розсільні сири є високоякісним білковим харчовим продуктом, що мають високі органолептичні показники, харчову та біологічну цінність. У статті обґрунтовується використання коров’ячого і козиного молока та їх сумішей при виробництві бринзи з метою поліпшення її якості та розширення асортименту розсільних сирів. Вивчено органолептичні та фізико-хімічні показники молока-сировини. Зразки коров’ячого і козиного молока за органічними показниками відповідають діючій нормативній документації. При складанні сумішевих композицій з молока визначали їх хімічний склад та фізико-хімічні показники. Результати показали, що зі збільшенням кількості коров’ячого молока у суміші зменшується вміст жиру, білка, сухого знежиреного молочного залишку. Сировина за сичужною пробою належить до 1 класу і відповідає вимогам сиропридатності. Встановлено, що всі зразки бринзи за органолептичними показниками відповідають вимогам ДСТУ та мають високі бали за бальною системою оцінки сирів. Було визначено, що бринза, виготовлена з коров’ячого молока, має приємніший запах та присмак, а бринза з козиного молока має кращу консистенцію. Бринза, виготовлена з суміші коров’ячого та козиного молока в співвідношенні 50:50, мала найкращі органолептичні показники – білий колір з кремовим відтінком, слабо виражений пікантний присмак козиного молока та солонуватий смак без зайвих запахів та ароматів. Встановлено, що зі збільшенням відсоткової складової козиного молока до 70 % присмак та аромат козиного молока був виражений занадто сильно.
- Open Access
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 70-76
Juice drinks based on vegetable raw materials
Numerous scientific studies have repeatedly proved the importance of consumption of fresh vegetables and fruits for human health. Natural juices from vegetables and fruits are a concentrated form of vitamins, minerals and antioxidants. Vegetable juices help absorb nutrients at a high rate. When consuming vegetables in the form of juice, β-carotene is absorbed faster, which contributes to the normal formation of the skin and strengthening of the mucous membranes. The purpose of the research is to develop a technology for the production of juice drinks based on vegetable raw materials with a balanced content of nutrients and low calorie content. The article presents data on the development of the technology of juice drinks based on fruit and vegetable raw materials using apple juice, pumpkin and carrot puree. The choice of blending components for creating biologically valuable drinks is substantiated: the basis is pumpkin puree; auxiliary – unclarified apple juice; biologically valuable additive – carrot puree. It has been experimentally investigated that the prescribed amount of apple juice in a blend with pumpkin and carrot should be at least 2.5 parts of the blend. The optimal content of carrot puree in a pumpkin-apple drink has been determined – no more than 10 %. The drink had a pleasant sweet pumpkin taste, a fruity aroma with a hint of orange apple and evenly distributed pulp. Various options for recipe ratios of food components for creating a pumpkin-apple-carrot drink with pulp according to organoleptic evaluation were studied. A technological scheme for the production of pumpkin-based juice with the addition of apple juice and carrot puree has been developed. Organoleptic evaluation and sensory analysis of experimental drinks were carried out. It was found that the ratio of components in mixed drinks against the background of the main one significantly affects the organoleptic indicators of the finished product. Численні наукові дослідження неодноразово доводили важливість споживання свіжих овочів та фруктів для здоров’я людини. Натуральні соки з овочів та фруктів – це концентрована форма вітамінів, мінералів та антиоксидантів. Овочеві соки допомагають засвоювати поживні компоненти з високою швидкістю. При вживанні овочів у вигляді соку β-каротин засвоюється швидше, що сприяє нормальному формуванню шкіри та зміцненню слизових оболонок. Мета дослідження – розробити технологію виробництва сокових напоїв на основі овочевої сировини зі збалансованим вмістом поживних речовин та низькою калорійністю. У статті наведені дані щодо розробки технології сокових напоїв на основі фруктово-овочевої сировини з використанням яблучного соку, гарбузового та морквяного пюре. Обґрунтовано вибір купажних компонентів для створення біологічно цінних напоїв: основа – гарбузове пюре; допоміжна – яблучний неосвітлений сік; біологічно цінна добавка – морквяне пюре. Експериментально досліджено, що рецептурна кількість яблучного соку у купажі з гарбузовим та морквяним повинна бути не меншою ніж 2,5 частини купажу. Визначено оптимальний вміст морквяного пюре в гарбузово-яблучному напої – не більше ніж 10 %. Напій мав приємний солодкий гарбузовий смак, фруктовий аромат з відтінком яблука помаранчевого кольору і рівномірно розподіленою м’якоттю. Досліджено різні варіанти рецептурних співвідношень харчових компонентів для створення гарбузово-яблучного-морквяного напою з м’якоттю за органолептичною оцінкою. Розроблено технологічну схему виробництва соку на основі гарбуза з додаванням яблучного соку і пюре моркви. Проведено органолептичну оцінку та сенсорний аналіз експериментальних напоїв. Виявлено, що співвідношення компонентів у купажованих напоях на фоні основного значно впливають на органолептичні показники готового продукту.
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 70-76
Open AccessJuice drinks based on vegetable raw materials
Numerous scientific studies have repeatedly proved the importance of consumption of fresh vegetables and fruits for human health. Natural juices from vegetables and fruits are a concentrated form of vitamins, minerals and antioxidants. Vegetable juices help absorb nutrients at a high rate. When consuming vegetables in the form of juice, β-carotene is absorbed faster, which contributes to the normal formation of the skin and strengthening of the mucous membranes. The purpose of the research is to develop a technology for the production of juice drinks based on vegetable raw materials with a balanced content of nutrients and low calorie content. The article presents data on the development of the technology of juice drinks based on fruit and vegetable raw materials using apple juice, pumpkin and carrot puree. The choice of blending components for creating biologically valuable drinks is substantiated: the basis is pumpkin puree; auxiliary – unclarified apple juice; biologically valuable additive – carrot puree. It has been experimentally investigated that the prescribed amount of apple juice in a blend with pumpkin and carrot should be at least 2.5 parts of the blend. The optimal content of carrot puree in a pumpkin-apple drink has been determined – no more than 10 %. The drink had a pleasant sweet pumpkin taste, a fruity aroma with a hint of orange apple and evenly distributed pulp. Various options for recipe ratios of food components for creating a pumpkin-apple-carrot drink with pulp according to organoleptic evaluation were studied. A technological scheme for the production of pumpkin-based juice with the addition of apple juice and carrot puree has been developed. Organoleptic evaluation and sensory analysis of experimental drinks were carried out. It was found that the ratio of components in mixed drinks against the background of the main one significantly affects the organoleptic indicators of the finished product. Численні наукові дослідження неодноразово доводили важливість споживання свіжих овочів та фруктів для здоров’я людини. Натуральні соки з овочів та фруктів – це концентрована форма вітамінів, мінералів та антиоксидантів. Овочеві соки допомагають засвоювати поживні компоненти з високою швидкістю. При вживанні овочів у вигляді соку β-каротин засвоюється швидше, що сприяє нормальному формуванню шкіри та зміцненню слизових оболонок. Мета дослідження – розробити технологію виробництва сокових напоїв на основі овочевої сировини зі збалансованим вмістом поживних речовин та низькою калорійністю. У статті наведені дані щодо розробки технології сокових напоїв на основі фруктово-овочевої сировини з використанням яблучного соку, гарбузового та морквяного пюре. Обґрунтовано вибір купажних компонентів для створення біологічно цінних напоїв: основа – гарбузове пюре; допоміжна – яблучний неосвітлений сік; біологічно цінна добавка – морквяне пюре. Експериментально досліджено, що рецептурна кількість яблучного соку у купажі з гарбузовим та морквяним повинна бути не меншою ніж 2,5 частини купажу. Визначено оптимальний вміст морквяного пюре в гарбузово-яблучному напої – не більше ніж 10 %. Напій мав приємний солодкий гарбузовий смак, фруктовий аромат з відтінком яблука помаранчевого кольору і рівномірно розподіленою м’якоттю. Досліджено різні варіанти рецептурних співвідношень харчових компонентів для створення гарбузово-яблучного-морквяного напою з м’якоттю за органолептичною оцінкою. Розроблено технологічну схему виробництва соку на основі гарбуза з додаванням яблучного соку і пюре моркви. Проведено органолептичну оцінку та сенсорний аналіз експериментальних напоїв. Виявлено, що співвідношення компонентів у купажованих напоях на фоні основного значно впливають на органолептичні показники готового продукту.