Ravi Gautam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ravi Gautam has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Hossein Sepehri Amin
National Institute for Materials Science, Tsukuba, Japan
4 shared publications - Hiroaki Mamiya
National Institute for Materials Science (NIMS), Tsukuba, Japan
2 shared publications Nikita Kulesh
National Institute for Materials Science (NIMS), Tsukuba, Japan
2 shared publicationsNobuhisa Ono
Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, Sendai, Japan
2 shared publicationsSatoshi Okamoto
National Institute for Materials Science (NIMS), Tsukuba, Japan
2 shared publicationsShozo Hiramoto
Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, Sendai, Japan
2 shared publications
Latest Publications
- 17 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41226-41235
Role of Grain Boundary Features in the Thermal Stability of LASTT-10 Thermoelectric Materials
Nanostructured PbTe-based compounds, including n-type LAST-m (AgPbmSbTem+2) and p-type LASTT-m (Ag(Pb1−xSnx)mSbTem+2), exhibit high thermoelectric performance, but their long-term thermal stability remains a major limitation for high-temperature applications. In this work, we provide detailed insights into the origin of thermal instabilities in p-type LASTT compounds by studying the Ag0.9(Pb0.5Sn0.5)10Sb0.8Te12 (LASTT-10) composition synthesized via melting, annealing, and spark plasma sintering. The prepared bulk samples exhibit a high zT of ∼1.05 ± 0.10 at 673 K. Systematic thermal cycling and isothermal annealing experiments reveal that the observed irreversible changes in transport properties stem from microstructural evolution of Te-rich (Ag1−xSbx)1+yTe2 (x = 0.12, y = 0.18) secondary phases located at the grain boundaries. Differential thermal analysis of LASTT-10 identifies an endothermic reaction ∼630 K associated with the thermodynamic instability of the grain boundary phases. Beyond 610 K, (Ag1−xSbx)1+yTe2 undergoes multiple phase transformations, which lead to macroscopic thermal instability. Cyclic power generation tests indicate a stable performance for LASTT-10 below 610 K, with maximum power density ∼0.51 W/cm2 and conversion efficiency ∼4.3% at ΔT ∼316 K. These findings clarify the mechanisms underlying the thermal degradation in LASTT-10 and highlight critical parameters for improving the thermal robustness of PbTe-based thermoelectric materials for high-temperature power generation.
- 17 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41226-41235
Role of Grain Boundary Features in the Thermal Stability of LASTT-10 Thermoelectric Materials
Nanostructured PbTe-based compounds, including n-type LAST-m (AgPbmSbTem+2) and p-type LASTT-m (Ag(Pb1−xSnx)mSbTem+2), exhibit high thermoelectric performance, but their long-term thermal stability remains a major limitation for high-temperature applications. In this work, we provide detailed insights into the origin of thermal instabilities in p-type LASTT compounds by studying the Ag0.9(Pb0.5Sn0.5)10Sb0.8Te12 (LASTT-10) composition synthesized via melting, annealing, and spark plasma sintering. The prepared bulk samples exhibit a high zT of ∼1.05 ± 0.10 at 673 K. Systematic thermal cycling and isothermal annealing experiments reveal that the observed irreversible changes in transport properties stem from microstructural evolution of Te-rich (Ag1−xSbx)1+yTe2 (x = 0.12, y = 0.18) secondary phases located at the grain boundaries. Differential thermal analysis of LASTT-10 identifies an endothermic reaction ∼630 K associated with the thermodynamic instability of the grain boundary phases. Beyond 610 K, (Ag1−xSbx)1+yTe2 undergoes multiple phase transformations, which lead to macroscopic thermal instability. Cyclic power generation tests indicate a stable performance for LASTT-10 below 610 K, with maximum power density ∼0.51 W/cm2 and conversion efficiency ∼4.3% at ΔT ∼316 K. These findings clarify the mechanisms underlying the thermal degradation in LASTT-10 and highlight critical parameters for improving the thermal robustness of PbTe-based thermoelectric materials for high-temperature power generation.
- Open Access
- 8 May 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Author Correction: Ultra-low core loss in Fe-enriched soft magnetic ribbons enabled by nanostructure and high-frequency domain engineering
- 8 May 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessAuthor Correction: Ultra-low core loss in Fe-enriched soft magnetic ribbons enabled by nanostructure and high-frequency domain engineering
- Open Access
- 31 March 2026
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 27 (1)
Structural heterogeneity-induced enhancement of transverse magneto-thermoelectric conversion revealed by thermoelectric imaging in functionally graded materials
Functionally graded materials (FGMs) exhibit continuous property variations that enable unique functionalities and provide efficient platforms for systematic property optimization. Here, we report the fabrication of FGMs with graded structural heterogeneity by annealing an amorphous metal under a one-dimensional temperature gradient. Using lock-in thermography (LIT), we spatially mapped transverse thermoelectric conversion with high spatial and temperature resolution. A pronounced non-monotonic response was observed, with the maximum anomalous Ettingshausen effect, a transverse charge-to-heat conversion in magnetic materials, appearing in the atomic-heterogeneity regime well before crystallization. This enhancement was not captured by conventional structural or longitudinal transport measurements, highlighting the exceptional sensitivity of transverse thermoelectric phenomena to subtle structural variations. Structural analyses using scanning transmission electron microscopy and atom probe tomography revealed Fe-based crystalline alloys and Cu nanoclusters embedded in the amorphous matrix, whose heterogeneity accounts for the enhanced response. These findings establish temperature-gradient-annealed FGMs, combined with LIT, as a powerful methodology for probing structural-heterogeneity-driven transverse electron transport and for designing high-performance flexible materials.
- 31 March 2026
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 27 (1)
Open AccessStructural heterogeneity-induced enhancement of transverse magneto-thermoelectric conversion revealed by thermoelectric imaging in functionally graded materials
Functionally graded materials (FGMs) exhibit continuous property variations that enable unique functionalities and provide efficient platforms for systematic property optimization. Here, we report the fabrication of FGMs with graded structural heterogeneity by annealing an amorphous metal under a one-dimensional temperature gradient. Using lock-in thermography (LIT), we spatially mapped transverse thermoelectric conversion with high spatial and temperature resolution. A pronounced non-monotonic response was observed, with the maximum anomalous Ettingshausen effect, a transverse charge-to-heat conversion in magnetic materials, appearing in the atomic-heterogeneity regime well before crystallization. This enhancement was not captured by conventional structural or longitudinal transport measurements, highlighting the exceptional sensitivity of transverse thermoelectric phenomena to subtle structural variations. Structural analyses using scanning transmission electron microscopy and atom probe tomography revealed Fe-based crystalline alloys and Cu nanoclusters embedded in the amorphous matrix, whose heterogeneity accounts for the enhanced response. These findings establish temperature-gradient-annealed FGMs, combined with LIT, as a powerful methodology for probing structural-heterogeneity-driven transverse electron transport and for designing high-performance flexible materials.
- Top Cited PapersOpen Access
- 3 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Ultra-low core loss in Fe-enriched soft magnetic ribbons enabled by nanostructure and high-frequency domain engineering
The next generation of power electronics necessitates materials capable of rapid response at tens of kilohertz frequencies while ensuring minimal core losses. Accelerating the advancement of power electronics hinges on addressing the current shortage of ultra-low core loss soft magnets, thereby enabling sustainable energy utilization and paving the way toward achieving zero carbon footprints. Here we demonstrate an approach that integrates nanostructure engineering with high-frequency domain structure control, significantly enhancing the performance of Fe-enriched amorphous ribbons. Our strategy reduces core loss by 55%, achieving an ultra-low loss of ~ 75 ± 1.3 W/kg at 10 kHz, 1 T. We attribute this improvement to optimized perpendicular magnetic anisotropy, which is induced by positive magnetostriction and compressive stress generated from partial nanocrystallization of α-Fe in a residual amorphous matrix. These configurations lead to the formation of a narrow stripe-shaped magnetic domain (~ 4.8 ± 0.6 μm wide), resulting in minimal excess loss. These findings highlight a pivotal advancement in soft magnet design, facilitating energy-efficient, miniaturized power electronics for modern applications.
- 3 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Top Cited PapersOpen AccessUltra-low core loss in Fe-enriched soft magnetic ribbons enabled by nanostructure and high-frequency domain engineering
The next generation of power electronics necessitates materials capable of rapid response at tens of kilohertz frequencies while ensuring minimal core losses. Accelerating the advancement of power electronics hinges on addressing the current shortage of ultra-low core loss soft magnets, thereby enabling sustainable energy utilization and paving the way toward achieving zero carbon footprints. Here we demonstrate an approach that integrates nanostructure engineering with high-frequency domain structure control, significantly enhancing the performance of Fe-enriched amorphous ribbons. Our strategy reduces core loss by 55%, achieving an ultra-low loss of ~ 75 ± 1.3 W/kg at 10 kHz, 1 T. We attribute this improvement to optimized perpendicular magnetic anisotropy, which is induced by positive magnetostriction and compressive stress generated from partial nanocrystallization of α-Fe in a residual amorphous matrix. These configurations lead to the formation of a narrow stripe-shaped magnetic domain (~ 4.8 ± 0.6 μm wide), resulting in minimal excess loss. These findings highlight a pivotal advancement in soft magnet design, facilitating energy-efficient, miniaturized power electronics for modern applications.
- 12 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 55 (8) , 1-5
Microstructure and Magnetic Properties of Anisotropic Strontium Hexaferrite Powders
Anisotropic strontium hexaferrite powders were prepared by solid-state method with subsequent magnetic field alignment and annealing. The microstructure of the powders was investigated using X-ray diffraction and scanning electron microscopy to understand the effect of the process on magnetic properties, magnetic texture, particle size, and morphology of the powders. The magnetic properties were measured using a vibrating sample magnetometer. A high coercivity (Hc) of 502 kA/m, hysteresis squareness (Mr/Ms) of 96%, and maximum energy product [(BH)max] of 32.2 kJ/m³ were obtained in the powders prepared via magnetic field (800 kA/m) alignment and annealing. The high Mr/Ms and Hc obtained in the powders were correlated with the magnetic texture, and defect free fine particles present in the powder.
- 12 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 55 (8) , 1-5
Microstructure and Magnetic Properties of Anisotropic Strontium Hexaferrite Powders
Anisotropic strontium hexaferrite powders were prepared by solid-state method with subsequent magnetic field alignment and annealing. The microstructure of the powders was investigated using X-ray diffraction and scanning electron microscopy to understand the effect of the process on magnetic properties, magnetic texture, particle size, and morphology of the powders. The magnetic properties were measured using a vibrating sample magnetometer. A high coercivity (Hc) of 502 kA/m, hysteresis squareness (Mr/Ms) of 96%, and maximum energy product [(BH)max] of 32.2 kJ/m³ were obtained in the powders prepared via magnetic field (800 kA/m) alignment and annealing. The high Mr/Ms and Hc obtained in the powders were correlated with the magnetic texture, and defect free fine particles present in the powder.
- Open Access
- 1 July 2017
- Published by Triveni Enterprises in Journal of Environmental Biology
- Vol. 38 (4) , 641-648
Comparative effect of formulated kairomonal dusts on parasitization efficiency of Trichogramma spp.
- 1 July 2017
- Published by Triveni Enterprises in Journal of Environmental Biology
- Vol. 38 (4) , 641-648
Open AccessComparative effect of formulated kairomonal dusts on parasitization efficiency of Trichogramma spp.