Xinyu Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xinyu Yan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Hu Long
Department of Orthodontics, State Key Laboratory of Oral Diseases & National Center for Stomatology & National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
4 shared publications - Wenli Lai
State Key Laboratory of Oral Diseases & National Center for Stomatology & National Clinical Research Center for Oral Diseases & Department of Orthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, China
4 shared publications - Xiaoqi Zhang
State Key Laboratory of Oral Diseases, National Clinical Research Center of Oral Diseases, Department of Orthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, China
2 shared publications - Yiyin Chen
School of Physical Science and Technology & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, China
2 shared publications - Fan Jian
State Key Laboratory of Oral Diseases, Department of Orthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu, China
1 shared publication - Hengyan Liang
State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
1 shared publication
Latest Publications
- Open Access
- 6 March 2023
- Published by MDPI AG in Diagnostics
- Vol. 13 (5) , 997
Association of Body Mass Index (BMI) with Lip Morphology Characteristics: A Cross-Sectional Study Based on Chinese Population
Background: Lip morphology is essential in diagnosis and treatment of orthodontics and orthognathic surgery to ensure facial aesthetics. Body mass index (BMI) has proved to have influence on facial soft tissue thickness, but its relationship with lip morphology is unclear. This study aimed to evaluate the association between BMI and lip morphology characteristics (LMCs) and thus provide information for personalized treatment. Methods: A cross-sectional study consisted of 1185 patients from 1 January 2010 to 31 December 2020 was conducted. Confounders of demography, dental features, skeletal parameters and LMCs were adjusted by multivariable linear regression to identify the association between BMI and LMCs. Group differences were evaluated with two-samples t-test and one-way ANOVA test. Mediation analysis was used for indirect effects assessment. Results: After adjusting for confounders, BMI is independently associated with upper lip length (0.039, [0.002–0.075]), soft pogonion thickness (0.120, [0.073–0.168]), inferior sulcus depth (0.040, [0.018–0.063]), lower lip length (0.208, [0.139–0.276]), and curve fitting revealed non-linearity to BMI in obese patients. Mediation analysis found BMI was associated with superior sulcus depth and basic upper lip thickness through upper lip length. Conclusions: BMI is positively associated with LMCs, except for nasolabial angle as negatively, while obese patients reverse or weaken these associations.
- 6 March 2023
- Published by MDPI AG in Diagnostics
- Vol. 13 (5) , 997
Open AccessAssociation of Body Mass Index (BMI) with Lip Morphology Characteristics: A Cross-Sectional Study Based on Chinese Population
Background: Lip morphology is essential in diagnosis and treatment of orthodontics and orthognathic surgery to ensure facial aesthetics. Body mass index (BMI) has proved to have influence on facial soft tissue thickness, but its relationship with lip morphology is unclear. This study aimed to evaluate the association between BMI and lip morphology characteristics (LMCs) and thus provide information for personalized treatment. Methods: A cross-sectional study consisted of 1185 patients from 1 January 2010 to 31 December 2020 was conducted. Confounders of demography, dental features, skeletal parameters and LMCs were adjusted by multivariable linear regression to identify the association between BMI and LMCs. Group differences were evaluated with two-samples t-test and one-way ANOVA test. Mediation analysis was used for indirect effects assessment. Results: After adjusting for confounders, BMI is independently associated with upper lip length (0.039, [0.002–0.075]), soft pogonion thickness (0.120, [0.073–0.168]), inferior sulcus depth (0.040, [0.018–0.063]), lower lip length (0.208, [0.139–0.276]), and curve fitting revealed non-linearity to BMI in obese patients. Mediation analysis found BMI was associated with superior sulcus depth and basic upper lip thickness through upper lip length. Conclusions: BMI is positively associated with LMCs, except for nasolabial angle as negatively, while obese patients reverse or weaken these associations.
- Open Access
- 18 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11756
Comparison of Root Parallelism in Extraction Cases Treated with Clear Aligners vs. Fixed Appliances
In the process of orthodontic treatment, root parallelism is related to the relapse of extraction spaces, black triangles, and periodontal health. However, there are few studies on root parallelism in extraction cases with different types of appliances. The objective was to compare the root parallelism in extraction cases treated with clear aligners vs. those treated with fixed appliances by measuring the differences per extraction site and to access the root-movement control capacity of both orthodontic appliances. A retrospective study was conducted on cases in which the first premolars were extracted, treated by clear aligner appliance (“Invisalign” system, 28 patients) or fixed appliance (30 patients). The angulations of the tooth axis (canines, the second premolars, the first molars, and the second molars) were measured to analyze and compare the difference in root parallelism between the two orthodontic appliances. The percentage of root parallelism between the canine and second premolar in both groups had no significant difference. However, judging from the average angle difference value, the fixed appliance might have a greater range in root angulation adjustment than the aligner. In the angulation categories, the aligner mainly showed root apical divergence, while the fixed appliance mainly showed root apical convergence. The dental crown of the molars was mainly non-tipping in both groups, but it could be observed that the dental crown of the maxillary molars had a tendency toward mesial inclination. In conclusion, the same root parallelism and root inclination were obtained in tooth extraction cases whether treated by clear aligners or fixed appliances. This study provides clinicians with more information on the performance of clear aligners and fixed appliances.
- 18 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11756
Open AccessComparison of Root Parallelism in Extraction Cases Treated with Clear Aligners vs. Fixed Appliances
In the process of orthodontic treatment, root parallelism is related to the relapse of extraction spaces, black triangles, and periodontal health. However, there are few studies on root parallelism in extraction cases with different types of appliances. The objective was to compare the root parallelism in extraction cases treated with clear aligners vs. those treated with fixed appliances by measuring the differences per extraction site and to access the root-movement control capacity of both orthodontic appliances. A retrospective study was conducted on cases in which the first premolars were extracted, treated by clear aligner appliance (“Invisalign” system, 28 patients) or fixed appliance (30 patients). The angulations of the tooth axis (canines, the second premolars, the first molars, and the second molars) were measured to analyze and compare the difference in root parallelism between the two orthodontic appliances. The percentage of root parallelism between the canine and second premolar in both groups had no significant difference. However, judging from the average angle difference value, the fixed appliance might have a greater range in root angulation adjustment than the aligner. In the angulation categories, the aligner mainly showed root apical divergence, while the fixed appliance mainly showed root apical convergence. The dental crown of the molars was mainly non-tipping in both groups, but it could be observed that the dental crown of the maxillary molars had a tendency toward mesial inclination. In conclusion, the same root parallelism and root inclination were obtained in tooth extraction cases whether treated by clear aligners or fixed appliances. This study provides clinicians with more information on the performance of clear aligners and fixed appliances.
- Open Access
- 23 January 2022
- Published by MDPI AG in Diagnostics
- Vol. 12 (2) , 285
Evaluation of Optimal Sites for the Insertion of Orthodontic Mini Implants at Mandibular Symphysis Region through Cone-Beam Computed Tomography
This study aims to evaluate the overall bone thickness (OBT) and cortical bone thickness (CBT) of mandibular symphysis and to determine the optimal sites for the insertion of orthodontic mini implants. Cone-beam computed tomography (CBCT) images of 32 patients were included in this study. The sample was further categorized into three facial types: low-, average-, and high-angle. OBT and CBT were measured at the mandibular symphysis region. All measurements were performed at six different heights from the cementoenamel junction [CEJ] and at seven different angles to the occlusal plane. Analysis of variance (ANOVA) was used for statistical comparison and a p value less than 0.05 was considered statistically significant. Our results revealed that neither OBT nor CBT was influenced by age or sex, except for the observation that CBT was significantly greater in adults than in adolescents. OBT and CBT were significantly greater in low-angle cases than in average- and high-angle cases. Both OBT and CBT were significantly influenced by insertion locations, heights and angles, and their interactions. CBT and OBT were greatest at the location between two lower central incisors, and became greater with increases in insertion height and angle. Both recommended and optimal insertion sites were mapped. The mandibular symphysis region was suitable for the placement of orthodontic mini implants. The optimal insertion site was 6–10 mm apical to the CEJ between two lower central incisors, with an insertion angle being 0–60 degrees to the occlusal plane.
- 23 January 2022
- Published by MDPI AG in Diagnostics
- Vol. 12 (2) , 285
Open AccessEvaluation of Optimal Sites for the Insertion of Orthodontic Mini Implants at Mandibular Symphysis Region through Cone-Beam Computed Tomography
This study aims to evaluate the overall bone thickness (OBT) and cortical bone thickness (CBT) of mandibular symphysis and to determine the optimal sites for the insertion of orthodontic mini implants. Cone-beam computed tomography (CBCT) images of 32 patients were included in this study. The sample was further categorized into three facial types: low-, average-, and high-angle. OBT and CBT were measured at the mandibular symphysis region. All measurements were performed at six different heights from the cementoenamel junction [CEJ] and at seven different angles to the occlusal plane. Analysis of variance (ANOVA) was used for statistical comparison and a p value less than 0.05 was considered statistically significant. Our results revealed that neither OBT nor CBT was influenced by age or sex, except for the observation that CBT was significantly greater in adults than in adolescents. OBT and CBT were significantly greater in low-angle cases than in average- and high-angle cases. Both OBT and CBT were significantly influenced by insertion locations, heights and angles, and their interactions. CBT and OBT were greatest at the location between two lower central incisors, and became greater with increases in insertion height and angle. Both recommended and optimal insertion sites were mapped. The mandibular symphysis region was suitable for the placement of orthodontic mini implants. The optimal insertion site was 6–10 mm apical to the CEJ between two lower central incisors, with an insertion angle being 0–60 degrees to the occlusal plane.
- Open Access
- 18 September 2021
- Published by MDPI AG in Diagnostics
- Vol. 11 (9) , 1713
Association of Upper Lip Morphology Characteristics with Sagittal and Vertical Skeletal Patterns: A Cross Sectional Study
Background: Upper lip morphology is essential in diagnosis and treatment of orthodontics and orthognathic surgery. This study is aimed to evaluate the association between upper lip characteristics (ULCs) and skeletal patterns (SPs). Methods: 2079 patients were involved and grouped by sagittal and vertical. Class I, II, and III were identified by ANB angle, while normodivergent, hyperdivergent, and hypodivergent were identified by Facial Height Index and Sum of Angles. ULCs were evaluated by superior sulcus depth, nasolabial angle, upper lip length, basic upper lip thickness, and upper lip thickness. Confounders including demography, malocclusion, upper incisors, and upper lips were adjusted by multivariate linear regression to identify the association between ULCs and SPs. Group differences were evaluated with analysis of variance and Chi-square test. Results: The mean value of ULCs and prevalence of SPs were explored in the Western China population. ULCs were significantly different in various sagittal, vertical, and combined SPs. Superior sulcus depth was negatively related to Class II, and positively related to Class III and the hypodivergent pattern after adjusted by confounders. Conclusions: ULCs significantly varied among different SPs, while only superior sulcus depth was independently associated with SPs, indicating superior sulcus depth is the only ULC that might be significantly corrected by intervention of skeletal growth.
- 18 September 2021
- Published by MDPI AG in Diagnostics
- Vol. 11 (9) , 1713
Open AccessAssociation of Upper Lip Morphology Characteristics with Sagittal and Vertical Skeletal Patterns: A Cross Sectional Study
Background: Upper lip morphology is essential in diagnosis and treatment of orthodontics and orthognathic surgery. This study is aimed to evaluate the association between upper lip characteristics (ULCs) and skeletal patterns (SPs). Methods: 2079 patients were involved and grouped by sagittal and vertical. Class I, II, and III were identified by ANB angle, while normodivergent, hyperdivergent, and hypodivergent were identified by Facial Height Index and Sum of Angles. ULCs were evaluated by superior sulcus depth, nasolabial angle, upper lip length, basic upper lip thickness, and upper lip thickness. Confounders including demography, malocclusion, upper incisors, and upper lips were adjusted by multivariate linear regression to identify the association between ULCs and SPs. Group differences were evaluated with analysis of variance and Chi-square test. Results: The mean value of ULCs and prevalence of SPs were explored in the Western China population. ULCs were significantly different in various sagittal, vertical, and combined SPs. Superior sulcus depth was negatively related to Class II, and positively related to Class III and the hypodivergent pattern after adjusted by confounders. Conclusions: ULCs significantly varied among different SPs, while only superior sulcus depth was independently associated with SPs, indicating superior sulcus depth is the only ULC that might be significantly corrected by intervention of skeletal growth.
- Open Access
- 8 July 2019
- Published by Springer Nature in BMC Oral Health
- Vol. 19 (1) , 1-11
Effectiveness, efficiency and adverse effects of using direct or indirect bonding technique in orthodontic patients: a systematic review and meta-analysis
The direct and indirect bonding techniques are commonly used in orthodontic treatment. The differences of the two techniques deserve evidence-based study. Randomized controlled trials (RCTs), wherein direct and indirect bonding techniques were used in orthodontic patients were considered. The MEDLINE, EMBASE, CENTRAL and Web of Science databases were searched to identify relevant articles published up to December 2018. Grey literature was also searched. Two authors performed data extraction independently and in duplicate using the data collection form. The included trials were assessed using the Cochrane risk of bias assessment tool. Of the 1557 studies screened, 42 full articles were scrutinized and assessed for eligibility. Eight RCTs (247 participants) were finally included for the analyses. The qualitative synthesis showed that no significant difference existed in the accuracy of bracket placement and oral hygiene status between the two bonding techniques. The indirect bonding was found to involve less chairside time but more total working time compared with the direct bonding. The meta-analysis on bond failure rate demonstrated no significant difference between the direct and indirect bonding (RR = 1.13, 95% CI = 0.78–1.64, I2 = 22%, P = 0.50). Consistent results were obtained in the subgroup analyses and sensitivity analyses. Weak evidence suggested that the direct and indirect bonding techniques had no significant difference in bracket placement accuracy, oral hygiene status and bond failure rate, for bonding orthodontic brackets. The indirect bonding might require less chairside time but more total working time in comparison with the direct bonding technique. High-quality well-designed randomized controlled trials are needed before a conclusive recommendation could be made.
- 8 July 2019
- Published by Springer Nature in BMC Oral Health
- Vol. 19 (1) , 1-11
Open AccessEffectiveness, efficiency and adverse effects of using direct or indirect bonding technique in orthodontic patients: a systematic review and meta-analysis
The direct and indirect bonding techniques are commonly used in orthodontic treatment. The differences of the two techniques deserve evidence-based study. Randomized controlled trials (RCTs), wherein direct and indirect bonding techniques were used in orthodontic patients were considered. The MEDLINE, EMBASE, CENTRAL and Web of Science databases were searched to identify relevant articles published up to December 2018. Grey literature was also searched. Two authors performed data extraction independently and in duplicate using the data collection form. The included trials were assessed using the Cochrane risk of bias assessment tool. Of the 1557 studies screened, 42 full articles were scrutinized and assessed for eligibility. Eight RCTs (247 participants) were finally included for the analyses. The qualitative synthesis showed that no significant difference existed in the accuracy of bracket placement and oral hygiene status between the two bonding techniques. The indirect bonding was found to involve less chairside time but more total working time compared with the direct bonding. The meta-analysis on bond failure rate demonstrated no significant difference between the direct and indirect bonding (RR = 1.13, 95% CI = 0.78–1.64, I2 = 22%, P = 0.50). Consistent results were obtained in the subgroup analyses and sensitivity analyses. Weak evidence suggested that the direct and indirect bonding techniques had no significant difference in bracket placement accuracy, oral hygiene status and bond failure rate, for bonding orthodontic brackets. The indirect bonding might require less chairside time but more total working time in comparison with the direct bonding technique. High-quality well-designed randomized controlled trials are needed before a conclusive recommendation could be made.