LXLi-Qun Xu

Li-Qun Xu

*This is an algorithmically generated author record based on publicly available information.

Li-Qun Xu has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Kinetically Regulated Isothermal Amplification Enables Enhanced microRNA Sensing via Solid‐State Nanopores

    by Chongxin Tao, Xunyu Zheng, Changhui Xu, Fei Zheng, Wenye Zheng, Zepeng Sun, Liqun Xu, Jingjie Sha, Jian Li

    Solid‐state nanopore sensing has become a common method for biomarker detection, but it still faces challenges with short nucleic acid markers (<50 nt) such as microRNAs (miRNAs). A simple but effective signal amplification strategy, specifically optimized for nanopore detection, is therefore needed. Here, we have developed an efficient workflow based on hybridization chain reaction (HCR) to specifically extend the target miRNA and conduct single‐molecule analysis within solid‐state nanopores. The miRNA translocation signals in nanopores were amplified with an enhanced signal‐to‐noise ratio (SNR) through multi‐step optimization and screening of amplification system design, enabling effective analysis across a wide range of nanopore sizes and voltages. We then introduced kinetically regulated hairpin engineering, validated by thermodynamic and molecular dynamics simulations, to address the challenges posed by the high heterogeneity of standard amplification products. This modification enables controlled amplification to improve product length uniformity, promote natural folding of DNA concatemers, and increase inter‐molecule repulsive forces, thereby enhancing signal quality. With further optimization of nanopore size, we achieved accurate detection of target miRNA below 10 pM and verified quantitative performance in serum samples. Our work is expected to provide an easy and robust pathway for enhanced sensing of small nucleic acids using solid‐state nanopores.

  • Bidirectionally Guided Large Language Models for Consumer-Centric Personalized Recommendation

    by Linfang Yu, Peng Xiao, Liqun Xu, Saru Kumari, Mohammed J. F. Alenazi

    With the increasing abundance of consumer electronics, consumers are facing the challenge of information overload, making personalized recommendation systems (RSs) crucial for enhancing consumer experience and promoting sales. Recently, LLM-driven RSs have attracted widespread attention. Nevertheless, the application of LLMs in recommendation still encounters challenges: how to effectively integrate user/item content (CT) and collaborative filtering (CF) information; how to effectively process heterogeneous token sequences; and how to efficiently generate recommendations. Therefore, we propose BGLLM4Rec, a bidirectionally guided LLM for recommendation. Specifically, a bidirectionally guided pre-training strategy is proposed to extend user/item ID tokens into the vocabulary of the pre-trained LLM, and leverage both CF LLM and CT LLM to learn their embedding representations. Meanwhile, a heterogeneous-homogeneous (Het-Hom) prompting strategy is proposed to decompose the input sequence into heterogeneous prompt and homogeneous main text parts, performing language modeling solely on the latter to enhance modeling effectiveness and stability. Finally, a recommendation-specific masked prompting fine-tuning strategy is employed to further refine the pre-trained CF LLM, enabling the efficient generation of multiple recommended items without hallucinations. Extensive experiments conducted on three public datasets have demonstrated that BGLLM4Rec exhibits exceptional performance in recommendation tasks.


  • Open Access

    Scheme Design and Challenges of DNA Sequencing Terminal Equipment Based on Solid-State Nanopore Sequencing

    by Yuanzhe Zhao, Jie Zhang, Zepeng Sun, Zheqi Cao, Liqun Xu, Jian Li

    Nanopore sequencing has become the primary technology for modern DNA sequencing. Solid nanopores are favored for their cost-effectiveness, stability, and scalability, particularly for portable applications. This paper presents a new design for a portable solid-state nanopore sequencing device based on the Linux platform. It employs a cutting-edge biological sequencing chip with a nanopore channel to capture through-hole data. Electrical signals from the chip are processed to create DNA sequence data files. The Linux-based Raspbian OS serves as the control terminal, facilitating seamless communication between components. Data is then transmitted to a cloud platform via a 5G unit for further analysis. This study integrates software and hardware for instrument validation.

  • SSpose: Self-Supervised Spatial-Aware Model for Human Pose Estimation

    by Linfang Yu, Zhen Qin, Liqun Xu, Zhiguang Qin, Kim-Kwang Raymond Choo

    Human pose estimation heavily relies on the anatomical relationships among different body parts to locate keypoints. Despite the significant progress achieved by CNN-based models in human pose estimation, they typically fail to explicitly learn the global dependencies among various body parts. To overcome this limitation, we propose a spatial-aware human pose estimation model called SSpose that explicitly captures the spatial dependencies between specific key points and different locations in an image. The proposed SSpose model adopts a hybrid CNN-Transformer encoder to simultaneously capture local features and global dependencies. To better preserve image details, a multi-scale fusion module is introduced to integrate coarse and fine-grained image information. By establishing a connection with the activation maximization (AM) principle, the final attention layer of the Transformer aggregates contributions (i.e., attention scores) from all image positions and forms the maximum position in the heatmap, thereby achieving keypoint localization in the head structure. Additionally, to address the issue of visible information leakage in convolutional reconstruction, we have devised a self-supervised training framework for the SSpose model. This framework incorporates mask autoencoder (MAE) technology into SSpose models by utilizing masked convolution and hierarchical masking strategy, thereby facilitating efficient self-supervised learning. Extensive experiments demonstrate that SSpose performs exceptionally well in the pose estimation task. On the COCO val set, it achieves an AP and AR of 77.3% and 82.1%, respectively, while on the COCO test-dev set, the AP and AR are 76.4% and 81.5%. Moreover, the model exhibits strong generalization capabilities on MPII. Code is available at https://github.com/yulinfangylf/SSpose.


  • Open Access

    Designing Interoperable Health Care Services Based on Fast Healthcare Interoperability Resources: Literature Review

    by Jingwen Nan, Li-Qun Xu

    Background: With the advent of the digital economy and the aging population, the demand for diversified health care services and innovative care delivery models has been overwhelming. This trend has accelerated the urgency to implement effective and efficient data exchange and service interoperability, which underpins coordinated care services among tiered health care institutions, improves the quality of oversight of regulators, and provides vast and comprehensive data collection to support clinical medicine and health economics research, thus improving the overall service quality and patient satisfaction. To meet this demand and facilitate the interoperability of IT systems of stakeholders, after years of preparation, Health Level 7 formally introduced, in 2014, the Fast Healthcare Interoperability Resources (FHIR) standard. It has since continued to evolve. FHIR depends on the Implementation Guide (IG) to ensure feasibility and consistency while developing an interoperable health care service. The IG defines rules with associated documentation on how FHIR resources are used to tackle a particular problem. However, a gap remains between IGs and the process of building actual services because IGs are rules without specifying concrete methods, procedures, or tools. Thus, stakeholders may feel it nontrivial to participate in the ecosystem, giving rise to the need for a more actionable practice guideline (PG) for promoting FHIR’s fast adoption.Objective: This study aimed to propose a general FHIR PG to facilitate stakeholders in the health care ecosystem to understand FHIR and quickly develop interoperable health care services.Methods: We selected a collection of FHIR-related papers about the latest studies or use cases on designing and building FHIR-based interoperable health care services and tagged each use case as belonging to 1 of the 3 dominant innovation feature groups that are also associated with practice stages, that is, data standardization, data management, and data integration. Next, we reviewed each group’s detailed process and key techniques to build respective care services and collate a complete FHIR PG. Finally, as an example, we arbitrarily selected a use case outside the scope of the reviewed papers and mapped it back to the FHIR PG to demonstrate the effectiveness and generalizability of the PG.Results: The FHIR PG includes 2 core elements: one is a practice design that defines the responsibilities of stakeholders and outlines the complete procedure from data to services, and the other is a development architecture for practice design, which lists the available tools for each practice step and provides direct and actionable recommendations.Conclusions: The FHIR PG can bridge the gap between IGs and the process of building actual services by proposing actionable methods, procedures, and tools. It assists stakeholders in identifying participants’ roles, managing the scope of responsibilities, and developing relevant modules, thus helping promote FHIR-based interoperable health care services.


  • Open Access

    Portable nanopore-sequencing technology: Trends in development and applications

    by Pin Chen, Zepeng Sun, Jiawei Wang, Xinlong Liu, Yun Bai, Jiang Chen, Anna Liu, Feng Qiao, Yang Chen, Chenyan Yuan, et al.

    Sequencing technology is the most commonly used technology in molecular biology research and an essential pillar for the development and applications of molecular biology. Since 1977, when the first generation of sequencing technology opened the door to interpreting the genetic code, sequencing technology has been developing for three generations. It has applications in all aspects of life and scientific research, such as disease diagnosis, drug target discovery, pathological research, species protection, and SARS-CoV-2 detection. However, the first- and second-generation sequencing technology relied on fluorescence detection systems and DNA polymerization enzyme systems, which increased the cost of sequencing technology and limited its scope of applications. The third-generation sequencing technology performs PCR-free and single-molecule sequencing, but it still depends on the fluorescence detection device. To break through these limitations, researchers have made arduous efforts to develop a new advanced portable sequencing technology represented by nanopore sequencing. Nanopore technology has the advantages of small size and convenient portability, independent of biochemical reagents, and direct reading using physical methods. This paper reviews the research and development process of nanopore sequencing technology (NST) from the laboratory to commercially viable tools; discusses the main types of nanopore sequencing technologies and their various applications in solving a wide range of real-world problems. In addition, the paper collates the analysis tools necessary for performing different processing tasks in nanopore sequencing. Finally, we highlight the challenges of NST and its future research and application directions.


  • Open Access

    LDMD: A database of microbes in human lung disease

    by Li-Qun Xu, Jing Yang, Weicheng Liang, Jiang Chen, Zepeng Sun, Qiang Zhang, Xinlong Liu, Feng Qiao, Jian Li

    Background: Lungs were initially thought to be sterile. However, with the development of sequencing technologies, various commensal microorganisms, especially bacteria, have been observed in the lungs of healthy humans. Several studies have also linked lung microbes to infectious lung diseases. However, few databases have focused on the metagenomics of lungs to provide microbial compositions and corresponding metadata information. Such a database would be handy for researching and treating lung diseases.Methods: To provide researchers with a preliminary understanding of lung microbes and their research methods, the LDMD collated nearly 10,000 studies in the literature covering over 30 diseases, gathered basic information such as the sources of lung microbe samples, sequencing methods, and processing software, as well as analyzed the metagenomic sequencing characteristics of lung microbes. Besides, the LDMD also contained data collected in our laboratory.Results: In this study, we established the Lung Disease Microorganisms Database (LDMD), a comprehensive database of microbes involved in lung disease. The LDMD offered sequence analysis capabilities, allowing users to upload their sequencing results, align them with the data collated in the database, and visually analyze the results.Conclusion: In conclusion, the LDMD possesses various functionalities that provide a convenient and comprehensive resource to study the lung metagenome and treat lung diseases.


  • Open Access

    Designing Interoperable Health Care Services Based on Fast Healthcare Interoperability Resources: Literature Review (Preprint)

    by Jingwen Nan, Li-Qun Xu

    BACKGROUND With the advent of the digital economy and the aging population, the demand for diversified health care services and innovative care delivery models has been overwhelming. This trend has accelerated the urgency to implement effective and efficient data exchange and service interoperability, which underpins coordinated care services among tiered health care institutions, improves the quality of oversight of regulators, and provides vast and comprehensive data collection to support clinical medicine and health economics research, thus improving the overall service quality and patient satisfaction. To meet this demand and facilitate the interoperability of IT systems of stakeholders, after years of preparation, Health Level 7 formally introduced, in 2014, the Fast Healthcare Interoperability Resources (FHIR) standard. It has since continued to evolve. FHIR depends on the Implementation Guide (IG) to ensure feasibility and consistency while developing an interoperable health care service. The IG defines rules with associated documentation on how FHIR resources are used to tackle a particular problem. However, a gap remains between IGs and the process of building actual services because IGs are rules without specifying concrete methods, procedures, or tools. Thus, stakeholders may feel it nontrivial to participate in the ecosystem, giving rise to the need for a more actionable practice guideline (PG) for promoting FHIR’s fast adoption. OBJECTIVE This study aimed to propose a general FHIR PG to facilitate stakeholders in the health care ecosystem to understand FHIR and quickly develop interoperable health care services. METHODS We selected a collection of FHIR-related papers about the latest studies or use cases on designing and building FHIR-based interoperable health care services and tagged each use case as belonging to 1 of the 3 dominant innovation feature groups that are also associated with practice stages, that is, data standardization, data management, and data integration. Next, we reviewed each group’s detailed process and key techniques to build respective care services and collate a complete FHIR PG. Finally, as an example, we arbitrarily selected a use case outside the scope of the reviewed papers and mapped it back to the FHIR PG to demonstrate the effectiveness and generalizability of the PG. RESULTS The FHIR PG includes 2 core elements: one is a practice design that defines the responsibilities of stakeholders and outlines the complete procedure from data to services, and the other is a development architecture for practice design, which lists the available tools for each practice step and provides direct and actionable recommendations. CONCLUSIONS The FHIR PG can bridge the gap between IGs and the process of building actual services by proposing actionable methods, procedures, and tools. It assists stakeholders in identifying participants’ roles, managing the scope of responsibilities, and developing relevant modules, thus helping promote FHIR-based interoperable health care services.


  • Open Access

    AutoNanopore: An Automated Adaptive and Robust Method to Locate Translocation Events in Solid-State Nanopore Current Traces

    by Zepeng Sun, Xinlong Liu, Wei Liu, Jiahui Li, Jing Yang, Feng Qiao, Jianjun Ma, Jingjie Sha, Jian Li, Li-Qun Xu

    Solid-state nanopore sequencing has shown impressive performances in several research scenarios but is still challenging, mainly due to the ultrafast speed of DNA translocation and significant noises embedded in raw signals. Hence, event detection, aiming to locate precisely these translocation events, is the fundamental step of data analysis. However, existing event detection methods use either a user-defined global threshold or an adaptive threshold determined by the data, assuming the baseline current to be stable over time. These disadvantages limit their applications in real-world application scenarios, especially considering that the results of different methods are often inconsistent. In this study, we develop an automated adaptive method called AutoNanopore, for fast and accurate event detection in current traces. The method consists of three consecutive steps: current trace segmentation, current amplitude outlier identification by straightforward statistical analyses, and event characterization. Then we propose ideas/metrics on how to quantitatively evaluate the performance of an event detection method, followed by comparing the performance of AutoNanopore against two state-of-the-art methods, OpenNanopore and EventPro. Finally, we examine if one method can detect the overlapping events detected by the other two, demonstrating that AutoNanopore has the highest coverage ratio. Moreover, AutoNanopore also performs well in detecting challenging events: e.g., those with significantly varying baselines.


  • Enabling Tiered and Coordinated Services in a Health Community of Primary Care Facilities and County Hospitals Based on HL7 FHIR

    by Jingwen Nan, Li-Qun Xu, Qingsong Wang, Changyu Bu, Jianjun Ma, Feng Qiao

    The HL7 FHIR is an emerging international standard designed to facilitate the interoperability among IT systems of healthcare providers' and other stakeholders'. The implementation of interoperability relies on three key elements: unified data standards, API specifications and the coordinated scheduling. In this paper, we addressed the interoperability between a health community of primary care facilities and county hospitals in China, which usually adopted diversified legacy health IT systems from different vendors over the years. We designed a series of open service FHIR API specifications targeting seven prior applications commonly encountered in such a community, as well as developed an integration service platform (ISPf) to serve these APIs. The seven scenarios included outpatient appointment process, two-way referrals, access to regional LIS, access to regional PACS, retrieval of medical service history, payment request and access to PHR. Each care institution needs to access the ISPf as per open service API specifications. The ISPf provides API authorization, calling and secure management services among healthcare providers. Our work demonstrated an open, flexible, effective and standards complied approach to promoting health IT systems' interoperability to enable tiered and coordinated healthcare services to the great benefit of under-served citizens.