TRTorsten Reissland

Torsten Reissland

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Torsten Reissland has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hybrid Beamforming for Multi-User Joint Communication and Sensing With URA Under Partially Connected Architectures

    by Mengyu Zhang, Yanpeng Su, Norman Franchi, Robert Weigel, Torsten Reissland

    Joint Communication and Sensing (JCAS) is a key enabler for future 6G networks, allowing data transmission and environmental sensing through shared spectral and hardware resources. To address challenges such as the sensing-communication trade-off, hardware limitations, and multi-user interference, we propose a scalable Multiple Input Multiple Output (MIMO) framework based on Uniform Rectangular Arrays (URA) with partially connected hybrid beamforming (PC-HBF). On the transmitter side, a fairnessaware beamforming optimization maximizes sensing gain while ensuring communication quality, solved via an Interior-Point Method (IPM) with adaptive initialization for improved convergence. At the receiver, a two-stage Block Orthogonal Matching Pursuit (Block-OMP) with Adaptive Dictionary Selection and Refinement (ADSR) enhances combining accuracy under hardware constraints while maintaining low complexity. For radar sensing, we introduce a hybrid direction-of-arrival (DoA) estimation method combining Beamscan and MUSIC algorithms. This design enables accurate angle estimation despite PC-HBF limitations, providing a practical sensing solution for JCAS scenarios. Simulation results demonstrate the practical effectiveness of our design: IPM-based beamforming converges within 15 iterations, ADSR-enhanced combining improves spectral efficiency by up to 1 dB over baseline OMP, approaching the performance of fully digital beamforming while supporting joint sensing, and the DoA method resolves targets spaced as closely as 5°. These gains underline the framework’s potential in real-world applications such as smart mobility and autonomous driving, enabling scalable and high-performance JCAS systems.


  • Open Access

    Analysis of an Architecture for Integrated Sensing and Communication in 5G OpenRAN

    by Daniel Lindenschmitt, Tobias Jung, Prudhvi Kumar Kakani, Torsten Reissland, Norman Franchi, Hans D. Schotten

    This paper analyzes the functional requirements and architectural considerations for Integrated Sensing and Communication ( ISAC) in a 5G Open Radio Access Network (OpenRAN) environment, with emphasis on secure and modular deployment. Focusing on a mono-static, half-duplex sensing approach, it evaluates radar setup options, signal types, and processing placement within the Radio Access Network ( RAN), considering performance and security implications. The proposed architecture minimizes hardware modifications by leveraging sniffer Radio Units (RU s) and existing OpenRAN fronthaul interfaces, while protecting sensitive In-phase and Quadrature (I/Q) data and control traffic against potential attacks. Security threats, such as passive sensing, spoofing, and privacy violations, are mapped to mitigation strategies within the OpenRAN framework. The result is a deployment blueprint applicable to both Public Land Mobile Networks ( PLMNs) and Non-Public Networks (NPNs), supporting future 6G ISAC capabilities in a standards-compliant manner.

  • Open Access

    AARC-FE: Electrical Assembly Authentication with Random Convolution Kernels and Fuzzy Extractors

    by Christian Spinnler, Torsten Reißland, Norman Franchi

    Identity management of devices in the Internet of Things (IoT) has become an essential part of a secure IoT infrastructure. Enrollment and authentication is performed based on public key infrastructure (PKI) in state-of-the-art deployments. This ensures device authenticity based on certificates. To mitigate the risk of compromised certificates and to strengthen the security, the certificates can be created on the device during enrollment based on physical properties, such as a physical unclonable function (PUF) of the device or a connected secure element. Identity management of devices in the Internet of Things (IoT) has become an essential part of a secure IoT infrastructure. Enrollment and authentication is performed based on public key infrastructure (PKI) in state-of-the-art deployments. This ensures device authenticity based on certificates. To mitigate the risk of compromised certificates and to strengthen the security, the certificates can be created on the device during enrollment based on physical properties, such as a physical unclonable function (PUF) of the device or a connected secure element. To add further physical properties to the device identity, we propose AARC-FE: Electrical Assemblie Authentication with Random Convoultion Kernels and Fuzzy Extractors. This is a new approach for hardware fingerprint creation of a serial communication interface. The proposed solution uses characteristics of the analog signal introduced by manufacturing variances, which are made detectable by using random convolutional kernels. The features produced by the convolution are transformed in a two-step approach to suit the requirements of a fuzzy extractor that is used to create strong keys for the observed communication interface. We create a stochastic model for evaluating the analog domain and transfer this model to a SPICE-based simulation of a common communication bus: $${\textrm{I}^{2}}\textrm{C}$$ I 2 C . To characterize the approach, metrics for Physical Unclonable Functions (PUFs) and authentication systems are applied. The evaluation shows, that AARC-FE is a feasible approach for key generation of an electrical assembly. Depending on the chosen parameters, the authentication system achieves an equal error rate (EER) as low as 0.09. With this approach, it is possible to detect attacks such as device swapping or sniffing attacks on a serial communication bus. The system derives asymmetric keys from the analog values of the communication bus and can thus participate in standard public key authentication schemes.


  • Open Access

    Toward AI in 6G: Concepts, Techniques, and Standards

    by Sina Shafaei, Alex Palaios, Zied Ennaceur, Jiajing Zhang, Vedhas Pandit, Pramesh Gautam, Afsaneh Gharouni, Borislava Gajic, Bitan Banerjee, Sachinkumar B. Mallikarjun, et al.

    The rapid evolution of cellular networks, driven by the proliferation of mobile devices and the exponential growth of the Internet of Things (IoT), has significantly advanced wireless communication technologies. Fifth generation of wireless communications technology (5G) enhanced data rates, latency, and network capacity, resulting in the emergence of new applications. However, the sixth generation (6G) is foreseen to support a new set of use cases with diverse requirements. This paper explores the critical role of artificial intelligence (AI) in shaping the trajectory from 5G to 6G. We discuss AI applications in 5G for network planning, resource allocation, traffic management, and security, as well as propose infrastructure upgrades, like edge servers and enhanced network topologies, to support AI in 6G. Additionally, we outline a visionary perspective on AI’s potential contributions to 6G, highlighting its role in enabling innovative services and applications. By providing this forward-looking perspective, this paper aims to stimulate discussion and guide the development of intelligent and autonomous 6G networks.


  • Open Access

    Combining an FMCW radar system with FSK modulation to a joint communication and sensing system

    by Samira Faghih-Naini, Michael Schneider, Sebastian Peters, Robert Weigel, Torsten Reissland

    Due to the rising occupancy of the radio spectrum, new strategies for covering the ever increasing amount of data are necessary. This work presents a system for integrating data transmission into a frequency-modulated continuous wave (FMCW) radar by modulating the radar signal with frequency shift keying (FSK). The system offers a high chirp bandwidth of 5 GHz and uses the 60 GHz band. The FSK carrier frequency affects the noise level. A higher frequency leads to a lower noise floor due to 1/f-noise but requires a higher sampling rate. Therefore, 15 MHz was chosen as a compromise. A high data rate allows for a fast data transmission but requires a short chirp time, which leads to a noisier frequency chirp. The radar parameters are also affected by this choice. This leads to a baud rate of 20.8 kbit/s. With a higher order FSK, higher data rates are possible. This proves that the data transmission via FMCW radar signals is possible and a first choice if lower data rates are sufficient, because the hardware effort is comparatively low.


  • Hardware Design Challenges and Modulation Schemes in Joint Communication and Sensing: Analyzation and Comparison of the State-of-the-Art Co-Located Communication and Sensing Systems

    by Samira Faghih-Naini, Caroline Sebastian, Torsten Reissland, Robert Weigel, Benedict Scheiner

    Joint communication and sensing (JCAS) holds great potential in a variety of applications because it combines radar signaling and data transmission into a single system. This means that both applications share their spectrum or even their waveform within the RF spectrum, a scarce and expensive resource. Meanwhile, research on beyond 5G and 6G is increasing tremendously. The advance of software-defined radio, where the signal processing mainly takes place in software, allows different implementations for communication and sensing [1] . Another reason for the integration of both into one system is the growing sensor density, which entails mutual interference. Furthermore, sharing hardware requires a sustainable and resource-efficient solution in the field of RF engineering.


  • High-Accuracy True Speed-Over-Ground Measurement Approaches for Rail Vehicles: Comparison of Highly Accurate State of the Art True Speed-Over-Ground Measurement Approaches for Rail Vehicles

    by Torsten Reissland, Robert Weigel, Alexander Koelpin, Fabian Lurz

    Increasing the use of rail-based passenger transportation, compared to passenger cars, is a key factor in the pursuit of a climate-friendly transport sector. For example, in Germany in 2021, carbon dioxide emissions per person-kilometer produced by long-distance train transportation were 72% lower compared to transportation by passenger cars [1] . To strengthen the competitiveness of rail transport, its reliability and cost from the user’s perspective need to be optimized. One way to achieve this goal is to enable higher levels of automation in rail transport, as is being sought in the automotive sector. And just as in the automotive sector, sensor systems are crucial for a reliable estimation of a vehicle’s condition. This reliable estimation is a necessary prerequisite for enabling automation functions.


  • Influence of Self-Interference in a Radar System for a Correlation Based True-Speed-Over-Ground Estimation Approach

    by Torsten Reissland, Fabian Michler, Robert Weigel, Alexander Koelpin, Fabian Lurz

    In this paper we present an experimental examination on the influence of self-interference in a true-speed-overground measurement system. The setup is based on two antenna pairs, in which interference is to be expected if they transmit simultaneously. This work compares the estimation results for simultaneous and for time division multiplexed transmission. Furthermore, an approach for the decoupling of the receive channels is introduced and examined.


  • Postprocessing and Evaluation for a Radar-Based True-Speed-Over-Ground Estimation System

    by Torsten Reissland, Fabian Michler, Benedict Scheiner, Alexander Koelpin, Robert Weigel

    This work presents a cross-correlation based true-speed-over-ground estimation approach based on experiences from an earlier system. The radar system parameters as well as the antenna configuration were adapted to fit the requirements of the presented application. Also, challenges regarding the previously limited velocity range are addressed and an appropriate solution is proposed. The entire system was thoroughly tested in a train scenario over a wide range of velocities. Very promising measurement results are presented and compared to related approaches.


  • Open Access

    Micrometer Sensing With Microwaves: Precise Radar Systems for Innovative Measurement Applications

    by Fabian Michler, Benedict Scheiner, Torsten Reissland, Robert Weigel, Alexander Koelpin

    Radar sensors have been widely used to estimate speed and displacement of remote targets. A novel market for contactless radar sensing is emerging in the field of automatization and process analysis, where non destructive testing and evaluation methods are desired. Here, modern radar systems offer various advantages over conventional sensors since they enable the contactless, continuous, and cost-efficient measurement of static or dynamic ranges. These can further be used for vibration and vital sign characterization. Advances in microwave technology, an increasing integration density, and the development of novel algorithms keep boosting the performance of the systems. After introducing the most common operation principles, such as unmodulated and frequency-modulated continuous-wave radar, different design aspects and building blocks of cutting-edge systems are explained in detail. In the second part, selected applications are described in detail. These include the sheet thickness monitoring of metallic foils, and the measurement of the ground speed of vehicles with the latest approaches. Exemplary low-power radar systems are presented to show the limits in terms of power consumption while still offering a high measurement precision. In addition, the topics of mechanical vibration sensing and vital sign sensing are addressed by introducing tailored systems.