James P. Shaffer
Research Subjects
Research Interests
James P. Shaffer has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Chang Liu
Quantum Valley Ideas Lab
3 shared publicationsDonald Booth
Quantum Valley Ideas Laboratories, Waterloo, Canada
3 shared publications- Donald Booth
Quantum Valley Ideas Laboratories
3 shared publications - Florian Christaller
Quantum Valley Ideas Laboratories
3 shared publications Kent Nickerson
Quantum Valley Ideas Lab
3 shared publicationsMatthias Schmidt
Quantum Valley Ideas Laboratories 485 Wes Graham Way N2L 0A7 Waterloo ON Canada
3 shared publications
Latest Publications
- 9 October 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 137 (15) , 153203
Microelectromechanical System Vapor Cells with Passive Internal Cavities
Microelectromechanical---so-called ``MEMs''---vapor cells are a key component in atom-based quantum sensors, such as clocks, gyroscopes, electric field sensors, and magnetometers. MEMs vapor cell fabrication for Rydberg atom radio frequency sensors is particularly demanding. The Rydberg states used for the sensor can shift in a constant electric field which can be generated by the internal surfaces of the vapor cell cavity. The ratio of the detection wavelength to vapor cell size can span a large range, meaning that the radio frequency field--vapor cell interaction is a critical design consideration. In many radio frequency sensing cases, there is a desire to minimize the interaction between the vapor cell and the target radio frequency field, as well as assure that every vapor cell behaves uniformly. These criteria favor MEMs vapor cells with low background electric fields. Known inert, organic coatings cannot survive the bonding temperatures required for conventional anodic bonding of a MEMs vapor cell. Applying inert, organic coatings to the internal cavities of MEMs vapor cells is a long-standing challenge. In this Letter, we present a low temperature bonding scheme that is compatible with coating the internal cavity of a MEMs vapor cell with octadecyltrichlorosilane [${\mathrm{CH}}_{3}({\mathrm{CH}}_{2}{)}_{17}{\mathrm{SiCl}}_{3}$, OTS]. The coating prevents the Cs used in the vapor cell from sticking to the walls. Spectral linewidths of $\ensuremath{\sim}300\text{ }\text{ }\mathrm{kHz}$ are obtained using Rydberg spectroscopy, with energy shifts corresponding to electric fields $<10\text{ }\mathrm{mV}\text{ }{\mathrm{cm}}^{\ensuremath{-}1}$.- 9 October 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 137 (15) , 153203
Microelectromechanical System Vapor Cells with Passive Internal Cavities
Microelectromechanical---so-called ``MEMs''---vapor cells are a key component in atom-based quantum sensors, such as clocks, gyroscopes, electric field sensors, and magnetometers. MEMs vapor cell fabrication for Rydberg atom radio frequency sensors is particularly demanding. The Rydberg states used for the sensor can shift in a constant electric field which can be generated by the internal surfaces of the vapor cell cavity. The ratio of the detection wavelength to vapor cell size can span a large range, meaning that the radio frequency field--vapor cell interaction is a critical design consideration. In many radio frequency sensing cases, there is a desire to minimize the interaction between the vapor cell and the target radio frequency field, as well as assure that every vapor cell behaves uniformly. These criteria favor MEMs vapor cells with low background electric fields. Known inert, organic coatings cannot survive the bonding temperatures required for conventional anodic bonding of a MEMs vapor cell. Applying inert, organic coatings to the internal cavities of MEMs vapor cells is a long-standing challenge. In this Letter, we present a low temperature bonding scheme that is compatible with coating the internal cavity of a MEMs vapor cell with octadecyltrichlorosilane [${\mathrm{CH}}_{3}({\mathrm{CH}}_{2}{)}_{17}{\mathrm{SiCl}}_{3}$, OTS]. The coating prevents the Cs used in the vapor cell from sticking to the walls. Spectral linewidths of $\ensuremath{\sim}300\text{ }\text{ }\mathrm{kHz}$ are obtained using Rydberg spectroscopy, with energy shifts corresponding to electric fields $<10\text{ }\mathrm{mV}\text{ }{\mathrm{cm}}^{\ensuremath{-}1}$.- 14 April 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (15) , 153201
Transient Phase Sensing in a Three-Photon Rydberg Ladder Scheme
Although Rydberg atoms have shown promise for use in novel types of radio frequency (rf) receivers, they have generally not been considered phase sensitive without the use of closed-loop interferometry or auxiliary rf fields. Here, we show that the high coherency of a narrow-linewidth three-photon ladder excitation scheme unique to cesium atoms enables all-optical sensing of transient changes in rf phase within a room temperature vapor cell. The transient response on the probe laser's transmission originates from phase-to-amplitude conversion via a disturbance of the coherency of the system in response to the phase shift of the rf field. We show that the amplitude and frequency of the oscillatory response provide information on the magnitude and direction of any rf field detuning. We demonstrate that the detuning sensitivity can be used to identify Doppler shifts in radar applications, by applying phase shifts embedded in rf pulses. The phase modulation within the radar pulse acts as a form of compression that facilitates the simultaneous detection of both target position and velocity.
- 14 April 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (15) , 153201
Transient Phase Sensing in a Three-Photon Rydberg Ladder Scheme
Although Rydberg atoms have shown promise for use in novel types of radio frequency (rf) receivers, they have generally not been considered phase sensitive without the use of closed-loop interferometry or auxiliary rf fields. Here, we show that the high coherency of a narrow-linewidth three-photon ladder excitation scheme unique to cesium atoms enables all-optical sensing of transient changes in rf phase within a room temperature vapor cell. The transient response on the probe laser's transmission originates from phase-to-amplitude conversion via a disturbance of the coherency of the system in response to the phase shift of the rf field. We show that the amplitude and frequency of the oscillatory response provide information on the magnitude and direction of any rf field detuning. We demonstrate that the detuning sensitivity can be used to identify Doppler shifts in radar applications, by applying phase shifts embedded in rf pulses. The phase modulation within the radar pulse acts as a form of compression that facilitates the simultaneous detection of both target position and velocity.
- 24 March 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (12) , 123201
Impact of Thermal Fields on Rydberg Atom Radio Frequency Sensors
Rydberg atom radio frequency sensors are unique in a number of ways, including possessing extraordinary carrier bandwidth, self-calibration, and accuracy. In this Letter, we examine the impact of thermal radiation on Rydberg atom sensors. Antennas are limited by their thermal background, while Rydberg atom sensors are coherent sensors. Incoherent thermal radiation does not limit Rydberg atom sensors in the same way as an antenna. The primary consequence of a thermal radiation field on Rydberg atom sensors is to decrease their coherence, as the decay rates of the Rydberg states used for sensing the radio frequency field are increased due to the thermal field, i.e., blackbody, modification of the atomic decay rates. Thermal and coherent field excitation are fundamentally different in that thermal fields produce statistically independent excitations with well-defined frequency, polarization, and propagation direction, while coherent states are coherent superpositions of photon number states. Consequently, thermal fields do not contribute to the coherences of the density matrix that are used for Rydberg atom sensing, except for damping them.
- 24 March 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (12) , 123201
Impact of Thermal Fields on Rydberg Atom Radio Frequency Sensors
Rydberg atom radio frequency sensors are unique in a number of ways, including possessing extraordinary carrier bandwidth, self-calibration, and accuracy. In this Letter, we examine the impact of thermal radiation on Rydberg atom sensors. Antennas are limited by their thermal background, while Rydberg atom sensors are coherent sensors. Incoherent thermal radiation does not limit Rydberg atom sensors in the same way as an antenna. The primary consequence of a thermal radiation field on Rydberg atom sensors is to decrease their coherence, as the decay rates of the Rydberg states used for sensing the radio frequency field are increased due to the thermal field, i.e., blackbody, modification of the atomic decay rates. Thermal and coherent field excitation are fundamentally different in that thermal fields produce statistically independent excitations with well-defined frequency, polarization, and propagation direction, while coherent states are coherent superpositions of photon number states. Consequently, thermal fields do not contribute to the coherences of the density matrix that are used for Rydberg atom sensing, except for damping them.
- Open Access
Micro-Electro-Mechanical System Vapor Cells With Passivated Internal Cavities
Micro-Electro-Mechanical, so called 'MEMs,' vapor cells are a key component in atom-based quantum sensors, such as clocks, gyroscopes, electric field sensors and magnetometers. MEMs vapor cell fabrication for Rydberg atom radio frequency sensors is particularly demanding. The Rydberg states used for the sensor can shift in a constant electric field which can be generated by the internal surfaces of the vapor cell cavity. The ratio of the detection wavelength to vapor cell size can span a large range, meaning that the radio frequency field-vapor cell interaction is a critical design consideration. In many radio frequency sensing cases, there is a desire to minimize the interaction between the vapor cell and the target radio frequency field, as well as assure that every vapor cell behaves uniformly. These criterion favor MEMs vapor cells with low background electric fields. Known inert, organic coatings cannot survive the bonding temperatures required for conventional anodic bonding of a MEMs vapor cell. Applying inert, organic coatings to the internal cavities of MEMs vapor cells is a longstanding challenge. In this paper, we present a low temperature bonding scheme that is compatible with coating the internal cavity of a MEMs vapor cell with Octadecyltrichlorosilane (CH$_3\,$(CH$_2$)$_{17}\,$SiCl$_3$, OTS). The coating prevents the Cs used in the vapor cell from sticking to the walls. Spectral linewidths of $\sim300\,$kHz are obtained using Rydberg spectroscopy, with energy shifts corresponding to electric fields $<$10$\,$mV$\,$cm$^{-1}$.Open AccessMicro-Electro-Mechanical System Vapor Cells With Passivated Internal Cavities
Micro-Electro-Mechanical, so called 'MEMs,' vapor cells are a key component in atom-based quantum sensors, such as clocks, gyroscopes, electric field sensors and magnetometers. MEMs vapor cell fabrication for Rydberg atom radio frequency sensors is particularly demanding. The Rydberg states used for the sensor can shift in a constant electric field which can be generated by the internal surfaces of the vapor cell cavity. The ratio of the detection wavelength to vapor cell size can span a large range, meaning that the radio frequency field-vapor cell interaction is a critical design consideration. In many radio frequency sensing cases, there is a desire to minimize the interaction between the vapor cell and the target radio frequency field, as well as assure that every vapor cell behaves uniformly. These criterion favor MEMs vapor cells with low background electric fields. Known inert, organic coatings cannot survive the bonding temperatures required for conventional anodic bonding of a MEMs vapor cell. Applying inert, organic coatings to the internal cavities of MEMs vapor cells is a longstanding challenge. In this paper, we present a low temperature bonding scheme that is compatible with coating the internal cavity of a MEMs vapor cell with Octadecyltrichlorosilane (CH$_3\,$(CH$_2$)$_{17}\,$SiCl$_3$, OTS). The coating prevents the Cs used in the vapor cell from sticking to the walls. Spectral linewidths of $\sim300\,$kHz are obtained using Rydberg spectroscopy, with energy shifts corresponding to electric fields $<$10$\,$mV$\,$cm$^{-1}$. - Open Access
All-optical radio-frequency phase detection for Rydberg atom sensors using oscillatory dynamics
Rydberg atom radio frequency sensors are a unique platform for precision electromagnetic field measurement, e.g. they have extraordinary carrier bandwidth spanning MHz-THz and can be self-calibrated. These photonic sensors use lasers to prepare and read out the atomic response to a radio frequency electromagnetic field. Most work on Rydberg atom sensors centers on radio frequency electric field strength because the sensor functions as a square law detector, unless an external radio frequency heterodyning field is used. A heterodyning field acts as a local oscillator and enables phase read out at the expense of the radio frequency equipment necessary to generate it. In order to overcome the disadvantages of a radio frequency local oscillator, we investigate all-optical phase-sensitive detection using a five-level closed-loop excitation scheme. We show that under finite detuning of the loop fields, the atomic response oscillates at the frequency of the detuning. The oscillation is transferred to a probe laser absorption signal. The phase, frequency and amplitude of the radio frequency signal are imprinted on the oscillatory dynamics and can be determined using demodulation and matched filter techniques applied to the probe laser transmission signal.
Open AccessAll-optical radio-frequency phase detection for Rydberg atom sensors using oscillatory dynamics
Rydberg atom radio frequency sensors are a unique platform for precision electromagnetic field measurement, e.g. they have extraordinary carrier bandwidth spanning MHz-THz and can be self-calibrated. These photonic sensors use lasers to prepare and read out the atomic response to a radio frequency electromagnetic field. Most work on Rydberg atom sensors centers on radio frequency electric field strength because the sensor functions as a square law detector, unless an external radio frequency heterodyning field is used. A heterodyning field acts as a local oscillator and enables phase read out at the expense of the radio frequency equipment necessary to generate it. In order to overcome the disadvantages of a radio frequency local oscillator, we investigate all-optical phase-sensitive detection using a five-level closed-loop excitation scheme. We show that under finite detuning of the loop fields, the atomic response oscillates at the frequency of the detuning. The oscillation is transferred to a probe laser absorption signal. The phase, frequency and amplitude of the radio frequency signal are imprinted on the oscillatory dynamics and can be determined using demodulation and matched filter techniques applied to the probe laser transmission signal.
- Open Access
- 9 April 2025
- Published by Springer Nature in Communications Engineering
- Vol. 4 (1) , 1-8
A photonic crystal receiver for Rydberg atom-based sensing
Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio frequency electromagnetic field. While these sensors are reasonably sensitive, the best conventional radio frequency sensors still outperform Rydberg atom-based sensors with respect to sensitivity. One approach to increase the sensitivity of Rydberg atom-based sensors is to engineer the vapor cell that contains the atomic gas. In this work, we introduce a passive, all-dielectric amplifier integrated into a Rydberg atom-based sensor vapor cell. The vapor cell is a combination of a slot waveguide and a photonic crystal. The structural features of the vapor cell yield a power amplification of ~24 dB. The radio frequency electromagnetic field is coupled adiabatically into the slot waveguide and slowed to increase the interaction between the radio frequency field and the atoms to effectively amplify the incoming signal, i.e., increase the Rabi frequency on the radio frequency transition. The work shows the utility of vapor cell engineering for atom-based quantum technologies and paves the way for other such devices.
- 9 April 2025
- Published by Springer Nature in Communications Engineering
- Vol. 4 (1) , 1-8
Open AccessA photonic crystal receiver for Rydberg atom-based sensing
Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio frequency electromagnetic field. While these sensors are reasonably sensitive, the best conventional radio frequency sensors still outperform Rydberg atom-based sensors with respect to sensitivity. One approach to increase the sensitivity of Rydberg atom-based sensors is to engineer the vapor cell that contains the atomic gas. In this work, we introduce a passive, all-dielectric amplifier integrated into a Rydberg atom-based sensor vapor cell. The vapor cell is a combination of a slot waveguide and a photonic crystal. The structural features of the vapor cell yield a power amplification of ~24 dB. The radio frequency electromagnetic field is coupled adiabatically into the slot waveguide and slowed to increase the interaction between the radio frequency field and the atoms to effectively amplify the incoming signal, i.e., increase the Rabi frequency on the radio frequency transition. The work shows the utility of vapor cell engineering for atom-based quantum technologies and paves the way for other such devices.
- 8 January 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (2) , 399-402
Stable, narrow-linewidth laser system with a broad frequency tunability and a fast switching time
For a Rydberg atom-based sensor to change its sensing frequency, the wavelength of the Rydberg state excitation laser must be altered. The wavelength shifts required can be on the order of 10 nm. A fast-tunable narrow-linewidth laser with broadband tuning capability is required. Here, we present a demonstration of a laser system that can rapidly switch a coupling laser as much as 8 nm in less than 50 μs. The laser system comprises a frequency-stabilized continuous wave laser and an electro-optic frequency comb. A filter enables selection of individual comb lines. A high-speed electro-optic modulator is used to tune the selected comb line to a specific frequency, i.e., an atomic transition. Through Rydberg atom-based sensing experiments, we demonstrate frequency hopping between two Rydberg states and a fast switching time of 400 μs, which we show can be reduced to ∼50 μs with a ping-pong scheme. If updating the RF frequency is not required during frequency hopping, a 200 ns switching time can be achieved. These results showcase the potential of the laser system for advanced Rydberg atom-based radio frequency sensing applications, like communications and radar.
- 8 January 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (2) , 399-402
Stable, narrow-linewidth laser system with a broad frequency tunability and a fast switching time
For a Rydberg atom-based sensor to change its sensing frequency, the wavelength of the Rydberg state excitation laser must be altered. The wavelength shifts required can be on the order of 10 nm. A fast-tunable narrow-linewidth laser with broadband tuning capability is required. Here, we present a demonstration of a laser system that can rapidly switch a coupling laser as much as 8 nm in less than 50 μs. The laser system comprises a frequency-stabilized continuous wave laser and an electro-optic frequency comb. A filter enables selection of individual comb lines. A high-speed electro-optic modulator is used to tune the selected comb line to a specific frequency, i.e., an atomic transition. Through Rydberg atom-based sensing experiments, we demonstrate frequency hopping between two Rydberg states and a fast switching time of 400 μs, which we show can be reduced to ∼50 μs with a ping-pong scheme. If updating the RF frequency is not required during frequency hopping, a 200 ns switching time can be achieved. These results showcase the potential of the laser system for advanced Rydberg atom-based radio frequency sensing applications, like communications and radar.
- 21 December 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 20 (6) , L061004
Three-photon Rydberg-atom-based radio-frequency sensing scheme with narrow linewidth
We demonstrate Rydberg atom-based radio-frequency sensing with a colinear three-photon scheme in a room-temperature cesium vapor cell that minimizes residual Doppler broadening of the probe-laser absorption feature. A sub-200-kHz spectral linewidth is observed and extends the self-calibrated Autler-Townes sensing regime to weaker fields by a factor of 18 compared to the theoretical limit of the most commonly used two-photon scheme. The sensitivity of the method to microsecond pulses is shown to be sufficient to detect radio-frequency Rabi frequencies of 2π × 0.44 MHz using a 480-kHz bandwidth at 108.9 GHz, demonstrating the ability to sense time-dependent signals suitable for radar and communications.
- 21 December 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 20 (6) , L061004
Three-photon Rydberg-atom-based radio-frequency sensing scheme with narrow linewidth
We demonstrate Rydberg atom-based radio-frequency sensing with a colinear three-photon scheme in a room-temperature cesium vapor cell that minimizes residual Doppler broadening of the probe-laser absorption feature. A sub-200-kHz spectral linewidth is observed and extends the self-calibrated Autler-Townes sensing regime to weaker fields by a factor of 18 compared to the theoretical limit of the most commonly used two-photon scheme. The sensitivity of the method to microsecond pulses is shown to be sufficient to detect radio-frequency Rabi frequencies of 2π × 0.44 MHz using a 480-kHz bandwidth at 108.9 GHz, demonstrating the ability to sense time-dependent signals suitable for radar and communications.
- 28 August 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 20 (2) , 024068
Rydberg-Atom Sensors in Bichromatic Radio-Frequency Fields
Rydberg-atom-based sensors are a type of radio-frequency sensor that is inherently quantum mechanical. Several configurations of the sensor use a local oscillator to determine the properties of the target radio-frequency field. We explain how the physics of Rydberg-atom-based sensors in two or more radio-frequency fields can be precisely described by a multiply dressed Jaynes-Cummings model. Studying Rydberg-atom-based sensors in two or more near-resonant radio-frequency fields is important for understanding how interfering signals as well as the local oscillator can affect measurements. Studies, so far, focus on a simplified approximation for the local oscillator-target field interaction that uses an analogy to radio-frequency heterodyning. The atom acts as a medium for exchanging electromagnetic field excitations of the field modes whose spectrum is a ladder. The Jaynes-Cummings states and their avoided crossings can be used to determine the properties of the radio-frequency fields. Radio-frequency field sensitivity enhancement for nonresonant radio frequencies is achieved and self-calibrated measurements are recovered under specific conditions described by the theory.
- 28 August 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 20 (2) , 024068
Rydberg-Atom Sensors in Bichromatic Radio-Frequency Fields
Rydberg-atom-based sensors are a type of radio-frequency sensor that is inherently quantum mechanical. Several configurations of the sensor use a local oscillator to determine the properties of the target radio-frequency field. We explain how the physics of Rydberg-atom-based sensors in two or more radio-frequency fields can be precisely described by a multiply dressed Jaynes-Cummings model. Studying Rydberg-atom-based sensors in two or more near-resonant radio-frequency fields is important for understanding how interfering signals as well as the local oscillator can affect measurements. Studies, so far, focus on a simplified approximation for the local oscillator-target field interaction that uses an analogy to radio-frequency heterodyning. The atom acts as a medium for exchanging electromagnetic field excitations of the field modes whose spectrum is a ladder. The Jaynes-Cummings states and their avoided crossings can be used to determine the properties of the radio-frequency fields. Radio-frequency field sensitivity enhancement for nonresonant radio frequencies is achieved and self-calibrated measurements are recovered under specific conditions described by the theory.
- Open Access
Rydberg atom-based radio frequency sensors: amplitude regime sensing
Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient and sensitivity in the amplitude regime. We describe the approximations that we applied to obtain the analytic expressions and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. Residual Doppler shifts are shown to limit sensitivity. An analytic expression for the amplitude regime of Rydberg atom-based sensing has not, to our knowledge, been obtained previously. The expressions, approximations and descriptions presented in the paper are important for maximizing the sensitivity of Rydberg atom-based sensors and for providing insight into the physics of multi-level interference phenomena.
Open AccessRydberg atom-based radio frequency sensors: amplitude regime sensing
Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient and sensitivity in the amplitude regime. We describe the approximations that we applied to obtain the analytic expressions and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. Residual Doppler shifts are shown to limit sensitivity. An analytic expression for the amplitude regime of Rydberg atom-based sensing has not, to our knowledge, been obtained previously. The expressions, approximations and descriptions presented in the paper are important for maximizing the sensitivity of Rydberg atom-based sensors and for providing insight into the physics of multi-level interference phenomena.