Katja E. Goetschl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Katja E. Goetschl has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Bettina Purgstaller
Institute of Applied Geosciences, Graz University of Technology, Rechbauerstrasse 12, 8010 Graz, Austria
3 shared publications - Martin Dietzel
Institute of Applied Geosciences, Graz University of Technology, Graz, Austria
3 shared publications Bettina Purgstaller
2 shared publicationsMartin Dietzel
2 shared publications- Vasileios Mavromatis
Institute of Applied Geosciences, Graz University of Technology, Rechbauerstrasse 12, 8010 Graz, Austria
2 shared publications - Adrian Immenhauser
Institute of Geology, Mineralogy and Geophysics, Ruhr University Bochum, Universitätsstraße 150, 44799 Bochum, Germany
1 shared publication
Latest Publications
- Open Access
- 28 August 2023
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 381 (2258) , 20220356
Glass transition temperatures and crystallization kinetics of a synthetic, anhydrous, amorphous calcium-magnesium carbonate
We report the first calorimetric observations of glass transition temperatures and crystallization rates of anhydrous, amorphous calcium-magnesium carbonate using fast scanning differential scanning calorimetry. Hydrous amorphous Ca 0.95 Mg 0.05 CO 3 · 0.5H 2 O (ACMC) solid was precipitated from a MgCl 2 –NaHCO 3 buffered solution, separated from the supernatant, and freeze-dried. An aliquot of the freeze-dried samples was additionally dried at 250°C for up to 6 h in a furnace and in a high-purity N 2 atmosphere to produce anhydrous ACMC. The glass transition temperature of the anhydrous Ca 0.95 Mg 0.05 CO 3 was determined by applying different heating rates (1000–6000 K s −1 ) and correcting for thermal lag to be 376°C and the relaxational heat capacity was determined to be C p = 0.16 J/(g K). Additionally, the heating rate dependence of the temperature that is associated with the corrected crystallization peaks is used to determine the activation energy of crystallization to be 275 kJ mol −1 . A high-resolution transmission electron microscopy study on the hydrous and anhydrous samples provided further constraints on their compositional and structural states. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 1)'.
- 28 August 2023
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 381 (2258) , 20220356
Open AccessGlass transition temperatures and crystallization kinetics of a synthetic, anhydrous, amorphous calcium-magnesium carbonate
We report the first calorimetric observations of glass transition temperatures and crystallization rates of anhydrous, amorphous calcium-magnesium carbonate using fast scanning differential scanning calorimetry. Hydrous amorphous Ca 0.95 Mg 0.05 CO 3 · 0.5H 2 O (ACMC) solid was precipitated from a MgCl 2 –NaHCO 3 buffered solution, separated from the supernatant, and freeze-dried. An aliquot of the freeze-dried samples was additionally dried at 250°C for up to 6 h in a furnace and in a high-purity N 2 atmosphere to produce anhydrous ACMC. The glass transition temperature of the anhydrous Ca 0.95 Mg 0.05 CO 3 was determined by applying different heating rates (1000–6000 K s −1 ) and correcting for thermal lag to be 376°C and the relaxational heat capacity was determined to be C p = 0.16 J/(g K). Additionally, the heating rate dependence of the temperature that is associated with the corrected crystallization peaks is used to determine the activation energy of crystallization to be 275 kJ mol −1 . A high-resolution transmission electron microscopy study on the hydrous and anhydrous samples provided further constraints on their compositional and structural states. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 1)'.
- Open Access
- 28 July 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (8) , 229
The Relationship between Bacterial Sulfur Cycling and Ca/Mg Carbonate Precipitation—Old Tales and New Insights from Lagoa Vermelha and Brejo do Espinho, Brazil
Over the few past decades, the concept of microbial sulfur cycling catalyzing the precipitation of CaMg (CO3)2 at low temperatures (34SSO4, δ18OSO4, and δ34SH2S), the sulfur isotopic composition of sedimentary pyrite (δ34SCRS), and sulfur and oxygen isotopic compositions of carbonate-associated sulfate (CAS, δ34SCAS and δ18OCAS). The pore-water profiles at Lagoa Vermelha indicate ongoing bacterial sulfate reduction by increasing δ34SSO4, δ18OSO4 and δ34SCRS values downcore. At Brejo do Espinho, the pore-water profiles displayed no depth-dependent isotope trends; the Ca/Mg ratio was, on average, lower, and the δ18OSO4 values in both surface and pore-water were strongly enriched in 18O. There was an overall mismatch between δ34SSO4 and the significantly higher δ34SCAS values. A negative correlation was observed between the Ca/Mg ratio and higher δ34SCAS values. The results show that the size difference between the two lagoons induces differences in the intensity of evaporation, which leads to the increased secretion of extrapolymeric substances (EPSs) by microbes in the smaller Brejo do Espinho. EPS provides the microenvironment where Ca/Mg carbonate can nucleate and preserve increased δ34SCAS values. Apart from EPS, increased sulfur oxidation is proposed to be a second factor causing relative enrichment of Ca/Mg carbonates at Brejo do Espinho. Our results emphasize the role of evaporative processes on Ca/Mg carbonate formation, and indicate that the respective δ34SCAS values reflect microenvironments rather than preserving an open marine δ34SSO4 signature.
- 28 July 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (8) , 229
Open AccessThe Relationship between Bacterial Sulfur Cycling and Ca/Mg Carbonate Precipitation—Old Tales and New Insights from Lagoa Vermelha and Brejo do Espinho, Brazil
Over the few past decades, the concept of microbial sulfur cycling catalyzing the precipitation of CaMg (CO3)2 at low temperatures (34SSO4, δ18OSO4, and δ34SH2S), the sulfur isotopic composition of sedimentary pyrite (δ34SCRS), and sulfur and oxygen isotopic compositions of carbonate-associated sulfate (CAS, δ34SCAS and δ18OCAS). The pore-water profiles at Lagoa Vermelha indicate ongoing bacterial sulfate reduction by increasing δ34SSO4, δ18OSO4 and δ34SCRS values downcore. At Brejo do Espinho, the pore-water profiles displayed no depth-dependent isotope trends; the Ca/Mg ratio was, on average, lower, and the δ18OSO4 values in both surface and pore-water were strongly enriched in 18O. There was an overall mismatch between δ34SSO4 and the significantly higher δ34SCAS values. A negative correlation was observed between the Ca/Mg ratio and higher δ34SCAS values. The results show that the size difference between the two lagoons induces differences in the intensity of evaporation, which leads to the increased secretion of extrapolymeric substances (EPSs) by microbes in the smaller Brejo do Espinho. EPS provides the microenvironment where Ca/Mg carbonate can nucleate and preserve increased δ34SCAS values. Apart from EPS, increased sulfur oxidation is proposed to be a second factor causing relative enrichment of Ca/Mg carbonates at Brejo do Espinho. Our results emphasize the role of evaporative processes on Ca/Mg carbonate formation, and indicate that the respective δ34SCAS values reflect microenvironments rather than preserving an open marine δ34SSO4 signature.
- Open Access
- 1 November 2021
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 312, 357-374
Control of MgSO40(aq) on the transformation of amorphous calcium carbonate to high-Mg calcite and long-term reactivity of the crystalline solid
- 1 November 2021
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 312, 357-374
Open AccessControl of MgSO40(aq) on the transformation of amorphous calcium carbonate to high-Mg calcite and long-term reactivity of the crystalline solid
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Transformation of Amorphous Calcium Carbonate in Air - The Role of Additives and Humidity
Amorphous calcium carbonate (ACC) is one of the six well-known CaCO3.nH2O (0 ≤ n ≤ 6) solids and is of vast interest in the development of advanced materials. ACC offers enhanced performance compared to its crystalline equivalents due to its high solubility, specific surface and porosity. A large body of studies has been devoted to the applicability of ACC in pharmaceutical and industrial domains, pointing out material porosity to be a key property for its application. However, less is known about the material porosity evolution during ACC transformation into crystalline calcium carbonate (e.g. calcite or vaterite).In this study we investigate the transformation of ACC in air and the effect of three additives (magnesium chloride, activated carbon and xanthan) at distinct humidities on the properties of the final crystalline product. ACC standard material was synthesized in either pure form or together with one of the above additives, stamped into a pellet, and exposed to 40 or 75 % RH. Mineralogical characterization of the crystalline products exhibits individual quantitative polymorph distribution induced by different additives and humidities. The most prominent result of the present study is the highly dissimilar pore size distribution when the ACC pellets were exposed to different humidities. Scanning electron microscopy combined with an image analysis software revealed 75 % RH to cause an increase of pore size of the final product by a factor of 10. These findings have significant implications to tailor and improve ACC nanomaterial designs and syntheses for pharmaceutical and industrial applications.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessTransformation of Amorphous Calcium Carbonate in Air - The Role of Additives and Humidity
Amorphous calcium carbonate (ACC) is one of the six well-known CaCO3.nH2O (0 ≤ n ≤ 6) solids and is of vast interest in the development of advanced materials. ACC offers enhanced performance compared to its crystalline equivalents due to its high solubility, specific surface and porosity. A large body of studies has been devoted to the applicability of ACC in pharmaceutical and industrial domains, pointing out material porosity to be a key property for its application. However, less is known about the material porosity evolution during ACC transformation into crystalline calcium carbonate (e.g. calcite or vaterite).In this study we investigate the transformation of ACC in air and the effect of three additives (magnesium chloride, activated carbon and xanthan) at distinct humidities on the properties of the final crystalline product. ACC standard material was synthesized in either pure form or together with one of the above additives, stamped into a pellet, and exposed to 40 or 75 % RH. Mineralogical characterization of the crystalline products exhibits individual quantitative polymorph distribution induced by different additives and humidities. The most prominent result of the present study is the highly dissimilar pore size distribution when the ACC pellets were exposed to different humidities. Scanning electron microscopy combined with an image analysis software revealed 75 % RH to cause an increase of pore size of the final product by a factor of 10. These findings have significant implications to tailor and improve ACC nanomaterial designs and syntheses for pharmaceutical and industrial applications.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Controls of Li incorporation in aragonite
The cation-to-Ca ratio in natural carbonate minerals is routinely used by the geoscientific community in order to reveal information about the conditions occurred during mineral formation in the geological past. Environmental reconstruction, however, relies on our understanding on the mechanisms controlling mineral growth but also on the physico-chemical properties of cations. In this respect experimental studies and laboratory calibrations of elemental ratios in synthetic carbonates provide important insights on the interpretation of the chemical signatures in natural samples. This holds especially truth for the chemical and isotopic signals of carbonates forming in continental environments that are characterized by the absence of bio-induced precipitation, low concentration of solutes in the forming fluid and slow growth rates (e.g. speleothems). In this study, we examine the incorporation of Li in aragonite, owing to its use as a temperature proxy and its importance in paleo-weathering reconstruction. Our preliminary results suggest that aragonite growth rate is likely the most important parameter controlling Li content in the forming phase. This finding comes in excellent agreement with the recent study by Füger et al. (2019). In addition, the experimental work suggest that temperature is also affecting the distribution of Li in aragonite but to a lesser extent than growth rate. It is anticipated that once completed this work will provide the fundamental knowledge needed for adequate interpretation of Li partitioning in aragonite and significantly improve our ability to interpret Li signatures in natural carbonates. References: Füger et al. 2019. Effect of growth rate and pH on lithium incorporation in calcite, Geochim. Cosmochim. Acta., 248, 14-24.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessControls of Li incorporation in aragonite
The cation-to-Ca ratio in natural carbonate minerals is routinely used by the geoscientific community in order to reveal information about the conditions occurred during mineral formation in the geological past. Environmental reconstruction, however, relies on our understanding on the mechanisms controlling mineral growth but also on the physico-chemical properties of cations. In this respect experimental studies and laboratory calibrations of elemental ratios in synthetic carbonates provide important insights on the interpretation of the chemical signatures in natural samples. This holds especially truth for the chemical and isotopic signals of carbonates forming in continental environments that are characterized by the absence of bio-induced precipitation, low concentration of solutes in the forming fluid and slow growth rates (e.g. speleothems). In this study, we examine the incorporation of Li in aragonite, owing to its use as a temperature proxy and its importance in paleo-weathering reconstruction. Our preliminary results suggest that aragonite growth rate is likely the most important parameter controlling Li content in the forming phase. This finding comes in excellent agreement with the recent study by Füger et al. (2019). In addition, the experimental work suggest that temperature is also affecting the distribution of Li in aragonite but to a lesser extent than growth rate. It is anticipated that once completed this work will provide the fundamental knowledge needed for adequate interpretation of Li partitioning in aragonite and significantly improve our ability to interpret Li signatures in natural carbonates. References: Füger et al. 2019. Effect of growth rate and pH on lithium incorporation in calcite, Geochim. Cosmochim. Acta., 248, 14-24.
- Open Access
Mg-Rich Authigenic Carbonates in Coastal Facies of the Vtoroe Zasechnoe Lake (Southwest Siberia): First Assessment and Possible Mechanisms of Formation
The formation of Mg-rich carbonates in continental lakes throughout the world is highly relevant to irreversible CO2 sequestration and the reconstruction of paleo-sedimentary environments. Here, preliminary results on Mg-rich carbonate formation at the coastal zone of Lake Vtoroe Zasechnoe, representing the Setovskiye group of water bodies located in the forest-steppe zone of Southwest Western Siberia, are reported. The Setovskiye lakes are Cl−–Na+–(SO42−) type, alkaline, and medium or highly saline. The results of microscopic and mineralogical studies of microbialites from shallow coastal waters of Lake Vtoroe Zasechnoe demonstrated that Mg in the studied lake was precipitated in the form of hydrous Mg carbonates, which occur as radially divergent crystals that form clusters in a dumbbell or star shape. It is possible that hydrous Mg carbonate forms due to the mineralization of exopolymeric substances (EPS) around bacterial cells within the algal mats. Therefore, the Vtoroe Zasechnoe Lake represents a rare case of Mg-carbonates formation under contemporary lacustrine conditions. Further research on this, as well as other lakes of Setovskiye group, is needed for a better understanding of the possible role of biomineralization and abiotic mechanisms, such as winter freezing and solute concentration, in the formation of authigenic Mg carbonate in modern aquatic environments.
Open AccessMg-Rich Authigenic Carbonates in Coastal Facies of the Vtoroe Zasechnoe Lake (Southwest Siberia): First Assessment and Possible Mechanisms of Formation
The formation of Mg-rich carbonates in continental lakes throughout the world is highly relevant to irreversible CO2 sequestration and the reconstruction of paleo-sedimentary environments. Here, preliminary results on Mg-rich carbonate formation at the coastal zone of Lake Vtoroe Zasechnoe, representing the Setovskiye group of water bodies located in the forest-steppe zone of Southwest Western Siberia, are reported. The Setovskiye lakes are Cl−–Na+–(SO42−) type, alkaline, and medium or highly saline. The results of microscopic and mineralogical studies of microbialites from shallow coastal waters of Lake Vtoroe Zasechnoe demonstrated that Mg in the studied lake was precipitated in the form of hydrous Mg carbonates, which occur as radially divergent crystals that form clusters in a dumbbell or star shape. It is possible that hydrous Mg carbonate forms due to the mineralization of exopolymeric substances (EPS) around bacterial cells within the algal mats. Therefore, the Vtoroe Zasechnoe Lake represents a rare case of Mg-carbonates formation under contemporary lacustrine conditions. Further research on this, as well as other lakes of Setovskiye group, is needed for a better understanding of the possible role of biomineralization and abiotic mechanisms, such as winter freezing and solute concentration, in the formation of authigenic Mg carbonate in modern aquatic environments.
- 1 November 2019
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 265, 505-519
Effect of sulfate on magnesium incorporation in low-magnesium calcite
- 1 November 2019
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 265, 505-519
Effect of sulfate on magnesium incorporation in low-magnesium calcite