Ebru Gökmeşe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ebru Gökmeşe has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Faruk Gokmeşe
Hitit Üniversitesi
5 shared publications - Aytekin Uzunoglu
Department of Materials and Metallurgical Engineering, Faculty of Chemistry-Metallurgical Engineering, Istanbul Technical University, Istanbul, Turkey
1 shared publication - Dursun Ali Köse
Department of Chemistry, Faculty of Arts and Sciences, Hitit University, Çorum, Turkey
1 shared publication - Esra Ölmez1 shared publication
Faruk Gokmeşe
Hitit Üniversitesi
1 shared publication- Hülya Yıldız
Hitit Üniversitesi
1 shared publication
Latest Publications
- Open Access
- 27 August 2026
- Published by Springer Nature in Communications Chemistry
Nanomolecularly imprinted polymer–surface plasmon resonance platform for monitoring trace-level Bisphenol A in drinking water
Bisphenol A is a widespread endocrine-disrupting contaminant frequently detected in aquatic environments, creating a need for rapid and reliable methods for water quality monitoring. Here we show that a solid-phase-synthesized nanomolecularly imprinted polymer (nanoMIP) can be integrated into a surface plasmon resonance (SPR) platform for selective, label-free detection of bisphenol A in water. The nanoMIPs exhibited uniform spherical morphology with an average hydrodynamic diameter of 94 nm, enabling homogeneous immobilization on gold SPR chips. Real-time measurements showed concentration-dependent binding over the 5–800 nM range with a detection limit of 1.46 nM. The sensor exhibited heterogeneous binding behavior, strong discrimination against structurally related bisphenols, and high imprinting efficiency compared with control nanoMIPs. Validation against liquid chromatography–mass spectrometry yielded recoveries of 96.90–98.93%. Analysis of commercial carboy waters revealed detectable bisphenol A and temperature-dependent migration. These findings demonstrate that the nanoMIP–SPR platform provides a rapid, reusable, and amplification-free strategy for sensitive monitoring of bisphenol A in aqueous environments.
- 27 August 2026
- Published by Springer Nature in Communications Chemistry
Open AccessNanomolecularly imprinted polymer–surface plasmon resonance platform for monitoring trace-level Bisphenol A in drinking water
Bisphenol A is a widespread endocrine-disrupting contaminant frequently detected in aquatic environments, creating a need for rapid and reliable methods for water quality monitoring. Here we show that a solid-phase-synthesized nanomolecularly imprinted polymer (nanoMIP) can be integrated into a surface plasmon resonance (SPR) platform for selective, label-free detection of bisphenol A in water. The nanoMIPs exhibited uniform spherical morphology with an average hydrodynamic diameter of 94 nm, enabling homogeneous immobilization on gold SPR chips. Real-time measurements showed concentration-dependent binding over the 5–800 nM range with a detection limit of 1.46 nM. The sensor exhibited heterogeneous binding behavior, strong discrimination against structurally related bisphenols, and high imprinting efficiency compared with control nanoMIPs. Validation against liquid chromatography–mass spectrometry yielded recoveries of 96.90–98.93%. Analysis of commercial carboy waters revealed detectable bisphenol A and temperature-dependent migration. These findings demonstrate that the nanoMIP–SPR platform provides a rapid, reusable, and amplification-free strategy for sensitive monitoring of bisphenol A in aqueous environments.
- 24 June 2026
- Published by Kastamonu University in Kastamonu University Journal of Engineering and Sciences
- Vol. 12 (1) , 12-20
Evaluation of the Electrochemical Behavior of NADH in the Produced Gold Nanoelectrodes
In this study, gold nanoelectrodes were fabricated using a laser-based micropipette puller method and employed for investigating the nanoelectrochemical behavior of nicotinamide adenine dinucleotide (NADH). Gold wires embedded in borosilicate capillaries were subjected to thinning, sealing, and pulling processes, followed by polishing and thermal annealing to obtain reproducible nanoelectrode surfaces. The produced nanoelectrodes were characterized electrochemically by cyclic voltammetry (CV) using ferrocene as a redox mediator in acetonitrile containing 0.05 M tetrabutylammonium tetrafluoroborate (TBATFB). The average radius of the fabricated nanoelectrodes was calculated as 118.54±51.53 nm at a 95% confidence interval. The electrochemical oxidation behavior of NADH was examined in phosphate buffer solution (pH 7) containing KCl as supporting electrolyte using cyclic voltammetry and square wave voltammetry (SWV). Optimization studies were performed by varying frequency and amplitude parameters to obtain the best analytical response. The concentration–current relationship was investigated in the range of 1–4 mM NADH, and a linear relationship was obtained with a correlation coefficient of R²=0.9954. The nanoelectrodes exhibited stable and symmetrical voltammetric responses, while increased supporting electrolyte concentration improved steady-state electrochemical behavior. The findings demonstrate that laser-fabricated gold nanoelectrodes provide a promising platform for rapid and sensitive electrochemical investigation of NADH. Due to their nanoscale dimensions and favorable mass-transfer characteristics, the produced nanoelectrodes may have potential applications in biomolecule sensing and intracellular electrochemical measurements.
- 24 June 2026
- Published by Kastamonu University in Kastamonu University Journal of Engineering and Sciences
- Vol. 12 (1) , 12-20
Evaluation of the Electrochemical Behavior of NADH in the Produced Gold Nanoelectrodes
In this study, gold nanoelectrodes were fabricated using a laser-based micropipette puller method and employed for investigating the nanoelectrochemical behavior of nicotinamide adenine dinucleotide (NADH). Gold wires embedded in borosilicate capillaries were subjected to thinning, sealing, and pulling processes, followed by polishing and thermal annealing to obtain reproducible nanoelectrode surfaces. The produced nanoelectrodes were characterized electrochemically by cyclic voltammetry (CV) using ferrocene as a redox mediator in acetonitrile containing 0.05 M tetrabutylammonium tetrafluoroborate (TBATFB). The average radius of the fabricated nanoelectrodes was calculated as 118.54±51.53 nm at a 95% confidence interval. The electrochemical oxidation behavior of NADH was examined in phosphate buffer solution (pH 7) containing KCl as supporting electrolyte using cyclic voltammetry and square wave voltammetry (SWV). Optimization studies were performed by varying frequency and amplitude parameters to obtain the best analytical response. The concentration–current relationship was investigated in the range of 1–4 mM NADH, and a linear relationship was obtained with a correlation coefficient of R²=0.9954. The nanoelectrodes exhibited stable and symmetrical voltammetric responses, while increased supporting electrolyte concentration improved steady-state electrochemical behavior. The findings demonstrate that laser-fabricated gold nanoelectrodes provide a promising platform for rapid and sensitive electrochemical investigation of NADH. Due to their nanoscale dimensions and favorable mass-transfer characteristics, the produced nanoelectrodes may have potential applications in biomolecule sensing and intracellular electrochemical measurements.
- Open Access
- 14 June 2026
- Published by Ataturk Universitesi in Ata-Kimya Dergisi
- Vol. 6 (1) , 28-38
FABRICATION AND CHARACTERIZATION OF MULTI NANODISC PLATINUM ELECTRODES BY LASER PULLING METHOD
In this study, multiple nanodisc platinum electrodes were produced using the laser drawing technique to bring together multiple microwires in a single structure. The produced electrodes were characterized using cyclic voltammetry (CV) and scanning electron microscopy (SEM). Ferrocene dissolved in acetonitrile has been used as a redox mediator due to its reversible electron transfer properties. Voltammetric responses showed the steady-state behavior characteristic of the nanoelectrodes, and the obtained current values were used to estimate the effective electrode radius. According to the cyclic voltammetric results, the steady-state currents of the dual and triple platinum nanoelectrodes were approximately two and three times higher, respectively, than that of the single platinum nanoelectrode. SEM analysis confirmed the formation of multiple nanodisc structures with uniform distribution. The developed method provides a simple and reproducible approach for fabricating multiple nanoelectrode systems with potential applications in electrochemical sensing and nanoelectrochemistry.
- 14 June 2026
- Published by Ataturk Universitesi in Ata-Kimya Dergisi
- Vol. 6 (1) , 28-38
Open AccessFABRICATION AND CHARACTERIZATION OF MULTI NANODISC PLATINUM ELECTRODES BY LASER PULLING METHOD
In this study, multiple nanodisc platinum electrodes were produced using the laser drawing technique to bring together multiple microwires in a single structure. The produced electrodes were characterized using cyclic voltammetry (CV) and scanning electron microscopy (SEM). Ferrocene dissolved in acetonitrile has been used as a redox mediator due to its reversible electron transfer properties. Voltammetric responses showed the steady-state behavior characteristic of the nanoelectrodes, and the obtained current values were used to estimate the effective electrode radius. According to the cyclic voltammetric results, the steady-state currents of the dual and triple platinum nanoelectrodes were approximately two and three times higher, respectively, than that of the single platinum nanoelectrode. SEM analysis confirmed the formation of multiple nanodisc structures with uniform distribution. The developed method provides a simple and reproducible approach for fabricating multiple nanoelectrode systems with potential applications in electrochemical sensing and nanoelectrochemistry.
- 2 March 2026
- Published by Turkish National Defense University in Savunma Bilimleri Dergisi
- Vol. 22 (1) , 179-192
Determinatıon of the Relationship Between the Amount of Explosive Material and the Explosion Crater in Terms of Post-Blast Explosion Investigation
Explosion investigations cover events ranging from natural gas accidents at home to major terrorist attacks. The majority of the explosion investigations carried out around the world are terrorist attacks with bombs. Determining the type of explosive and the amount of explosive material is a priority in the investigation of terrorist attacks with explosions. Making these determinations at an early stage of the investigation will allow the incident to be clarified more quickly. There are some characteristic features of the crime scenes where the bomb attacks took place. The eruption crater is the most important and also the richest source of evidence. The size of the explosion crater varies depending on the amount of explosive used in the incident.In this reserach, a numerical study was carried out on the craters formed by six explosive devices of different weights placed under the surface in order to establish the relationship between the amount of explosive material and the explosion crater. Considering the real events, explosive devices were created and the data obtained by conducting crime scene investigations after the explosions were presented. It has been observed that the diameters and volumes of the craters formed by the devices with a higher amount of explosive material are larger than the devices with less explosive material. Expanding such studies in order to be able to determine the amount of explosive material in the investigation of terrorist bombing attacks will make great contributions to the literature and law enforcement units in the field. This study is a pilot study examining the relationship between the amount of explosive material and the explosion crater in Turkey, and is intended to contribute to researchers who want to conduct studies on the subject in the future.
- 2 March 2026
- Published by Turkish National Defense University in Savunma Bilimleri Dergisi
- Vol. 22 (1) , 179-192
Determinatıon of the Relationship Between the Amount of Explosive Material and the Explosion Crater in Terms of Post-Blast Explosion Investigation
Explosion investigations cover events ranging from natural gas accidents at home to major terrorist attacks. The majority of the explosion investigations carried out around the world are terrorist attacks with bombs. Determining the type of explosive and the amount of explosive material is a priority in the investigation of terrorist attacks with explosions. Making these determinations at an early stage of the investigation will allow the incident to be clarified more quickly. There are some characteristic features of the crime scenes where the bomb attacks took place. The eruption crater is the most important and also the richest source of evidence. The size of the explosion crater varies depending on the amount of explosive used in the incident.In this reserach, a numerical study was carried out on the craters formed by six explosive devices of different weights placed under the surface in order to establish the relationship between the amount of explosive material and the explosion crater. Considering the real events, explosive devices were created and the data obtained by conducting crime scene investigations after the explosions were presented. It has been observed that the diameters and volumes of the craters formed by the devices with a higher amount of explosive material are larger than the devices with less explosive material. Expanding such studies in order to be able to determine the amount of explosive material in the investigation of terrorist bombing attacks will make great contributions to the literature and law enforcement units in the field. This study is a pilot study examining the relationship between the amount of explosive material and the explosion crater in Turkey, and is intended to contribute to researchers who want to conduct studies on the subject in the future.
- Open Access
- 31 March 2023
- Published by Hitit University in Hittite Journal of Science and Engineering
- Vol. 10 (1) , 49-56
Monitoring of Lead and Some Heavy Metals in Wheat Flour of Corum Province, Turkey: An Air Quality Comparison
Food security is a priority issue for sustainable global development. Metal uptake by plants could have a significant impact on crop quality in areas of rapid industrialization with high fallout of airborne particles. In this study, concentrations of some heavy metals (copper, Cu; zinc, Zn; and lead, Pb) in flour samples supplied in Çorum, defined as one of the “New Industry Focus”, were investigated using inductively coupled plasma-optical emission spectrometry (ICP-OES) to determine the heavy metal contamination. The results showed that the concentration of Pb in all samples examined exceeded the maximum permissible limit. To monitor the increase in Pb concentration and its relationship with air pollution, a two-year laboratory experiment was conducted. It was found that the increase in Pb concentration of about 47% and 77% for two flour samples was consistent with the increase in annual average particulate matter with diameter 10 micrometers PM10 concentrations (55% and 82%) obtained from two stations.
- 31 March 2023
- Published by Hitit University in Hittite Journal of Science and Engineering
- Vol. 10 (1) , 49-56
Open AccessMonitoring of Lead and Some Heavy Metals in Wheat Flour of Corum Province, Turkey: An Air Quality Comparison
Food security is a priority issue for sustainable global development. Metal uptake by plants could have a significant impact on crop quality in areas of rapid industrialization with high fallout of airborne particles. In this study, concentrations of some heavy metals (copper, Cu; zinc, Zn; and lead, Pb) in flour samples supplied in Çorum, defined as one of the “New Industry Focus”, were investigated using inductively coupled plasma-optical emission spectrometry (ICP-OES) to determine the heavy metal contamination. The results showed that the concentration of Pb in all samples examined exceeded the maximum permissible limit. To monitor the increase in Pb concentration and its relationship with air pollution, a two-year laboratory experiment was conducted. It was found that the increase in Pb concentration of about 47% and 77% for two flour samples was consistent with the increase in annual average particulate matter with diameter 10 micrometers PM10 concentrations (55% and 82%) obtained from two stations.
- 31 March 2021
- Published by Hitit University in Hittite Journal of Science and Engineering
- Vol. 8 (1) , 71-77
Differential Pulse Voltammetric Determination of Clozapine in Drug Dosage Forms at Bismuth Film Electrode
A new differential pulse voltammetric method for the determination of clozapine in drug dosage forms has been described. In this study, the amount of clozapine in commercial forms has been determined at bismuth modified glassy carbon electrode by taking advantage of the electrochemical oxidation of it. The glassy carbon electrode was modified with BiCl3 to prepare the bismuth film electrode. The acetate buffer solution at pH = 5.00 was selected as the supporting electrolyte in where the maximum current was observed for clozapine at the bismuth film electrode. The effect of pH on peak current and peak potential of clozapine was investigated by differential pulse voltammetry (DPV), and the effect of scan rate on the peak current was examined by cyclic voltammetry (CV). With this developed voltammetric method, the detection limit for clozapine in the working range of 1×10-6 M and 10×10-6 M was found to be 6.112×10-9. The amount of clozapine in the drug tablets was stated after the determination of analytical parameters. The recovery study was executed to check the accuracy and precision of the applied method.
- 31 March 2021
- Published by Hitit University in Hittite Journal of Science and Engineering
- Vol. 8 (1) , 71-77
Differential Pulse Voltammetric Determination of Clozapine in Drug Dosage Forms at Bismuth Film Electrode
A new differential pulse voltammetric method for the determination of clozapine in drug dosage forms has been described. In this study, the amount of clozapine in commercial forms has been determined at bismuth modified glassy carbon electrode by taking advantage of the electrochemical oxidation of it. The glassy carbon electrode was modified with BiCl3 to prepare the bismuth film electrode. The acetate buffer solution at pH = 5.00 was selected as the supporting electrolyte in where the maximum current was observed for clozapine at the bismuth film electrode. The effect of pH on peak current and peak potential of clozapine was investigated by differential pulse voltammetry (DPV), and the effect of scan rate on the peak current was examined by cyclic voltammetry (CV). With this developed voltammetric method, the detection limit for clozapine in the working range of 1×10-6 M and 10×10-6 M was found to be 6.112×10-9. The amount of clozapine in the drug tablets was stated after the determination of analytical parameters. The recovery study was executed to check the accuracy and precision of the applied method.
- 22 July 2019
- Published by Springer Nature in Journal of Cluster Science
- Vol. 31 (1) , 231-239
Electrochemical Glucose Detection Using PdAg Nanoparticles Anchored on rGO/MWCNT Nanohybrids
- 22 July 2019
- Published by Springer Nature in Journal of Cluster Science
- Vol. 31 (1) , 231-239
Electrochemical Glucose Detection Using PdAg Nanoparticles Anchored on rGO/MWCNT Nanohybrids