Anika Gebauer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anika Gebauer has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Ali Sakhaee
Department of Soil System Science, Helmholtz Centre for Environmental Research—UFZ, Halle (Saale), Germany
2 shared publicationsMareike Ließ
Department of Soil System Science, Helmholtz Centre for Environmental Research—UFZ, Halle (Saale), Germany
2 shared publications- Mareike Ließ
Department Soil System Science, Helmholtz Centre for Environmental Research – UFZ, Halle (Saale), Germany
2 shared publications Monja Ellinger
Department of Soil System Science, Helmholtz Centre for Environmental Research – UFZ, Halle (Saale), Germany
2 shared publicationsVictor M. Brito Gomez
Departamento de Recursos Hídricos y Ciencias Ambientales, Facultad de Ciencias Agropecuarias, Universidad de Cuenca, Cuenca, Ecuador
2 shared publicationsAxel Don
Department of Soil System Science, Helmholtz Centre for Environmental Research—UFZ, Halle (Saale), Germany
1 shared publication
Latest Publications
- Open Access
- 4 January 2022
- Published by Frontiers Media SA in Frontiers in Soil Science
- Vol. 1
Topsoil Texture Regionalization for Agricultural Soils in Germany—An Iterative Approach to Advance Model Interpretation
Site-specific spatially continuous soil texture data is required for many purposes such as the simulation of carbon dynamics, the estimation of drought impact on agriculture, or the modeling of water erosion rates. At large scales, there are often only conventional polygon-based soil texture maps, which are hardly reproducible, contain abrupt changes at polygon borders, and therefore are not suitable for most quantitative applications. Digital soil mapping methods can provide the required soil texture information in form of reproducible site-specific predictions with associated uncertainties. Machine learning models were trained in a nested cross-validation approach to predict the spatial distribution of the topsoil (0–30 cm) clay, silt, and sand contents in 100 m resolution. The differential evolution algorithm was applied to optimize the model parameters. High-quality nation-wide soil texture data of 2,991 soil profiles was obtained from the first German agricultural soil inventory. We tested an iterative approach by training models on predictor datasets of increasing size, which contained up to 50 variables. The best results were achieved when training the models on the complete predictor dataset. They explained about 59% of the variance in clay, 75% of the variance in silt, and 77% of the variance in sand content. The RMSE values ranged between approximately 8.2 wt.% (clay), 11.8 wt.% (silt), and 15.0 wt.% (sand). Due to their high performance, models were able to predict the spatial texture distribution. They captured the high importance of the soil forming factors parent material and relief. Our results demonstrate the high predictive power of machine learning in predicting soil texture at large scales. The iterative approach enhanced model interpretability. It revealed that the incorporated soil maps partly substituted the relief and parent material predictors. Overall, the spatially continuous soil texture predictions provide valuable input for many quantitative applications on agricultural topsoils in Germany.
- 4 January 2022
- Published by Frontiers Media SA in Frontiers in Soil Science
- Vol. 1
Open AccessTopsoil Texture Regionalization for Agricultural Soils in Germany—An Iterative Approach to Advance Model Interpretation
Site-specific spatially continuous soil texture data is required for many purposes such as the simulation of carbon dynamics, the estimation of drought impact on agriculture, or the modeling of water erosion rates. At large scales, there are often only conventional polygon-based soil texture maps, which are hardly reproducible, contain abrupt changes at polygon borders, and therefore are not suitable for most quantitative applications. Digital soil mapping methods can provide the required soil texture information in form of reproducible site-specific predictions with associated uncertainties. Machine learning models were trained in a nested cross-validation approach to predict the spatial distribution of the topsoil (0–30 cm) clay, silt, and sand contents in 100 m resolution. The differential evolution algorithm was applied to optimize the model parameters. High-quality nation-wide soil texture data of 2,991 soil profiles was obtained from the first German agricultural soil inventory. We tested an iterative approach by training models on predictor datasets of increasing size, which contained up to 50 variables. The best results were achieved when training the models on the complete predictor dataset. They explained about 59% of the variance in clay, 75% of the variance in silt, and 77% of the variance in sand content. The RMSE values ranged between approximately 8.2 wt.% (clay), 11.8 wt.% (silt), and 15.0 wt.% (sand). Due to their high performance, models were able to predict the spatial texture distribution. They captured the high importance of the soil forming factors parent material and relief. Our results demonstrate the high predictive power of machine learning in predicting soil texture at large scales. The iterative approach enhanced model interpretability. It revealed that the incorporated soil maps partly substituted the relief and parent material predictors. Overall, the spatially continuous soil texture predictions provide valuable input for many quantitative applications on agricultural topsoils in Germany.
- Open Access
- 3 June 2020
- Published by Copernicus GmbH in SOIL
- Vol. 6 (1) , 215-229
Development of pedotransfer functions for water retention in tropical mountain soil landscapes: spotlight on parameter tuning in machine learning
Machine-learning algorithms are good at computing non-linear problems and fitting complex composite functions, which makes them an adequate tool for addressing multiple environmental research questions. One important application is the development of pedotransfer functions (PTFs). This study aims to develop water retention PTFs for two remote tropical mountain regions with rather different soil landscapes: (1) those dominated by peat soils and soils under volcanic influence with high organic matter contents and (2) those dominated by tropical mineral soils. Two tuning procedures were compared to fit boosted regression tree models: (1) tuning with grid search, which is the standard approach in pedometrics; and (2) tuning with differential evolution optimization. A nested cross-validation approach was applied to generate robust models. The area-specific PTFs developed outperform other more general PTFs. Furthermore, the first PTF for typical soils of Páramo landscapes (Ecuador), i.e., organic soils under volcanic influence, is presented. Overall, the results confirmed the differential evolution algorithm's high potential for tuning machine-learning models. While models based on tuning with grid search roughly predicted the response variables' mean for both areas, models applying the differential evolution algorithm for parameter tuning explained up to 25 times more of the response variables' variance.
- 3 June 2020
- Published by Copernicus GmbH in SOIL
- Vol. 6 (1) , 215-229
Open AccessDevelopment of pedotransfer functions for water retention in tropical mountain soil landscapes: spotlight on parameter tuning in machine learning
Machine-learning algorithms are good at computing non-linear problems and fitting complex composite functions, which makes them an adequate tool for addressing multiple environmental research questions. One important application is the development of pedotransfer functions (PTFs). This study aims to develop water retention PTFs for two remote tropical mountain regions with rather different soil landscapes: (1) those dominated by peat soils and soils under volcanic influence with high organic matter contents and (2) those dominated by tropical mineral soils. Two tuning procedures were compared to fit boosted regression tree models: (1) tuning with grid search, which is the standard approach in pedometrics; and (2) tuning with differential evolution optimization. A nested cross-validation approach was applied to generate robust models. The area-specific PTFs developed outperform other more general PTFs. Furthermore, the first PTF for typical soils of Páramo landscapes (Ecuador), i.e., organic soils under volcanic influence, is presented. Overall, the results confirmed the differential evolution algorithm's high potential for tuning machine-learning models. While models based on tuning with grid search roughly predicted the response variables' mean for both areas, models applying the differential evolution algorithm for parameter tuning explained up to 25 times more of the response variables' variance.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
Applying machine learning and differential evolution optimization for soil texture predictions at national scale (Germany)
In order to assess the carbon and water storage capacity of agricultural soils at national scale (Germany), spatially continuous, high-resolution soil information on the particle size distribution is an essential requirement. Machine learning models are good at computing complex, composite non-linear functions. They can be trained on point data to relate soil properties (response variable) to approximations of soil forming factors (predictors). Finally, the obtained models can be used for spatial soil property predictions.We developed models for topsoil texture regionalization using two powerful algorithms: the boosted regression trees machine learning algorithm, and the differential evolution algorithm applied for parameter tuning. Texture data (clay, silt, sand) originated from two sources: (1) the new soil database of the German Agricultural Soil Inventory (BZE), and (2) the well-known, publicly available database of the European Land Use / Cover Land Survey (LUCAS). BZE texture data results from an eight-kilometer sampling raster (2991 sampling points). LUCAS data from soils under agricultural use (Germany) comprises 1377 sampling points. The predictor datasets included DEM-based topography variables, information on the geographic position, and legacy maps of soil systematic units. In a first step, a nested five-fold cross-validation approach was used to tune and train models on the BZE data. In a second step, the amount of training data was increased by adding two-thirds of the LUCAS data. Model performance was evaluated by (1) cross-validation (RCV²), and (2) by using the remaining LUCAS data as an independent external test set (Rexternal²).Models trained on the BZE data were able to predict the nation-wide spatial distribution of clay, silt and sand (RCV² = 0.57 – 0.76; Rexternal² = 0.68 – 0.83). Model performance was further enhanced by adding the LUCAS data to the training dataset.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessApplying machine learning and differential evolution optimization for soil texture predictions at national scale (Germany)
In order to assess the carbon and water storage capacity of agricultural soils at national scale (Germany), spatially continuous, high-resolution soil information on the particle size distribution is an essential requirement. Machine learning models are good at computing complex, composite non-linear functions. They can be trained on point data to relate soil properties (response variable) to approximations of soil forming factors (predictors). Finally, the obtained models can be used for spatial soil property predictions.We developed models for topsoil texture regionalization using two powerful algorithms: the boosted regression trees machine learning algorithm, and the differential evolution algorithm applied for parameter tuning. Texture data (clay, silt, sand) originated from two sources: (1) the new soil database of the German Agricultural Soil Inventory (BZE), and (2) the well-known, publicly available database of the European Land Use / Cover Land Survey (LUCAS). BZE texture data results from an eight-kilometer sampling raster (2991 sampling points). LUCAS data from soils under agricultural use (Germany) comprises 1377 sampling points. The predictor datasets included DEM-based topography variables, information on the geographic position, and legacy maps of soil systematic units. In a first step, a nested five-fold cross-validation approach was used to tune and train models on the BZE data. In a second step, the amount of training data was increased by adding two-thirds of the LUCAS data. Model performance was evaluated by (1) cross-validation (RCV²), and (2) by using the remaining LUCAS data as an independent external test set (Rexternal²).Models trained on the BZE data were able to predict the nation-wide spatial distribution of clay, silt and sand (RCV² = 0.57 – 0.76; Rexternal² = 0.68 – 0.83). Model performance was further enhanced by adding the LUCAS data to the training dataset.
- Open Access
- 4 November 2019
- Published by Copernicus GmbH in EGUsphere
- Vol. 2019, 1-24
Development of pedotransfer functions for tropical mountain soilscapes: Spotlight on parameter tuning in machine learning
Machine learning algorithms are good in computing non-linear problems and fitting complex composite functions, which makes them an adequate tool to address multiple environmental research questions. One important application is the development of pedotransfer functions (PTF). This study aims to develop water retention PTFs for two remote tropical mountain regions of rather different soil-landscapes, dominated by (1) organic soils under volcanic influence, and (2) tropical mineral soils. Two tuning procedures were compared to fit boosted regression tree models: (1) tuning by grid search, which is the standard approach in pedometrics and (2) tuning by differential evolution optimization. A nested cross-validation approach was applied to generate robust models. The developed area-specific PTFs outrival other more general PTFs. Furthermore, the first PTF for typical soils of Páramo landscapes, i.e. organic soils under volcanic influence, is presented. Overall, results confirmed the differential evolution algorithm’s high potential for tuning machine learning models. While models based on tuning by grid search roughly predicted the response variables' mean for both areas, models applying the differential evolution algorithm for parameter tuning explained up to 22 times more of the response variables' variance.
- 4 November 2019
- Published by Copernicus GmbH in EGUsphere
- Vol. 2019, 1-24
Open AccessDevelopment of pedotransfer functions for tropical mountain soilscapes: Spotlight on parameter tuning in machine learning
Machine learning algorithms are good in computing non-linear problems and fitting complex composite functions, which makes them an adequate tool to address multiple environmental research questions. One important application is the development of pedotransfer functions (PTF). This study aims to develop water retention PTFs for two remote tropical mountain regions of rather different soil-landscapes, dominated by (1) organic soils under volcanic influence, and (2) tropical mineral soils. Two tuning procedures were compared to fit boosted regression tree models: (1) tuning by grid search, which is the standard approach in pedometrics and (2) tuning by differential evolution optimization. A nested cross-validation approach was applied to generate robust models. The developed area-specific PTFs outrival other more general PTFs. Furthermore, the first PTF for typical soils of Páramo landscapes, i.e. organic soils under volcanic influence, is presented. Overall, results confirmed the differential evolution algorithm’s high potential for tuning machine learning models. While models based on tuning by grid search roughly predicted the response variables' mean for both areas, models applying the differential evolution algorithm for parameter tuning explained up to 22 times more of the response variables' variance.