WDWei Du

Wei Du

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wei Du has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Predictive energy management of series-parallel hybrid electric vehicles and its sensitivity analysis to dynamic traffic environment

    by Yubo Lian, Binggen Zhao, Wei Du, Dong Zeng, Song Li, Puxi Wang

    This paper proposes a efficient model predictive controller (MPC) for the energy management problem of dual mode intelligent (DM-i) hybrid powertrain equipped vehicles in navigation driving scenarios. The controller is divided into two layers where the upper-layer plans the optimal state of charge (SOC) trajectory according to the dynamic traffic information provided by the navigation system, while the lower-layer determines the optimal operation mode and engine working points. The alternating direction multiplier method (ADMM) is employed in the upper-layer to obtain the optimal solution considering mode switching. Simulation results show that compared with the rule-based strategy, MPC operates the powertrain with 1.48% and 2.49% lower fuel consumption in urban and highway routes, respectively. In the complex routes composed of urban and highway, the fuel-saving rate of MPC is 6.2% and 8.92%, respectively. In the varying scenarios where the driver temporarily changes the driving route, the economy of MPC is still better than the rule-based strategy, which ensures that MPC has strong robustness in practical applications.


  • A study of powertrain parameter optimization based on performance requirements of a vehicle platform

    by Puxi Wang, Wei Du, Dong Zeng, Song Li, Yicheng Lv

    Powertrain top down design is a vital process for vehicle platformization and performance development. To obtain the optimal component size of a plug-in hybrid electric vehicle (PHEV) platform, this study proposes an optimization framework with the goal of minimizing performance redundancy. First, we analyze the characteristics of the powertrain architecture, and propose the indicators through performance gradient planning of the vehicle platform. Then we establish the mathematical model of the powertrain, and formulate the optimization problem. Particle Swarm Optimization (PSO) is used to solve the problem and a platform optimization problem with eight vehicle models is performed. Optimization results show that compared to traditional single vehicle powertrain optimization, platform based powertrain optimization can greatly reduce the number of components and save development costs through the sharing of components. With only three electric machines, two engines, two generators, and two sets of transmissions, the performance requirements of the entire platform can be met, and the maximum performance redundancy of different vehicle models is only 0.205. It can be seen that platform based powertrain optimization can greatly reduce vehicle costs and improve profit margins.

  • Open Access

    Deterministic and stochastic model predictive energy management of hybrid electric vehicles using two improved speed predictors

    by Jingzhou Gao, Kai Xu, Ke Li, Wei Du, Zhenhao Zheng, Shengdun Zhao, Lijun Yan

    The performance of model predictive control strategies for hybrid electric vehicles (HEVs) highly depends on the accuracy of future speed predictions. This paper proposes improved prediction models for deterministic model predictive control (DMPC) and stochastic model predictive control (SMPC), respectively. For DMPC, the neural network-based predictor is first introduced and taken as the benchmark predictor. A novel deterministic predictor considering historical prediction errors is proposed, which relies on the assumption that the offset between the prediction and measurement at current instant is a good estimate of the offset in the short future. Based on the proposed deterministic predictor, a stochastic predictor that considers the distribution law of historical data at different locations is further proposed for SMPC. Simulation results show that the controller using the proposed deterministic prediction model improves fuel economy by 2.89%, and the controller using the proposed stochastic prediction model improves fuel economy by 4.5% compared with the benchmark.


  • Profit-effective component sizing for electric delivery trucks with dual motor coupling powertrain

    by Fei Ju, Wei Du, Weichao Zhuang, Bingbing Li, Tao Wang, Weiwei Wang, Huijie Ma


  • Open Access

    Design and utilization of thrust fluctuation of slotted-tubular permanent magnet linear motor: Mechatronics for low-frequency vibration forming machine

    by Jingzhou Gao, Wei Du, Zhenhao Zheng, Shengdun Zhao, Weiming He

    Usually, the conventional low-frequency vibration forming machine has a main transmission mechanism as the driving source to provide forming force and an auxiliary mechanism as the vibration source to generate vibration force. The transmission chain is long and the structure is complex and bloated, which affects the forming process and product quality. This paper presents a novel mechatronics idea of low-frequency vibration forming machine, which uses a slotted tubular permanent magnet synchronous linear motor (slotted-TPMLM) as both the driving source and the vibration source. The key is that the slotted-TPMLM provides sufficient forming force accompanied with a certain low-frequency vibration force. Consequently, this paper focuses on the thrust fluctuation caused by the structure. Firstly, the effect of end force and the influence of cogging force are discussed in detail through Fourier analyses, especially the stator adjustment length and pole-slot combination. Then, the slotted-TPMLM is designed, manufactured, and tested. The results show that the slotted-TPMLM can provide a certain low-frequency vibration force (low frequency of 4.8 Hz at 100 mm/s and 48 Hz at 1000 mm/s), which meets the technical requirements. Consequently, the feasibility of the novel mechatronics idea of a low-frequency vibration forming machine has been verified. This research will contribute to the field of linear motors and metal forming machines.

  • Meta-Learning-Based Predictive Energy Management for 4WD Battery Electric Vehicles

    by Zhiyan Feng, Wei Du, Chin-Boon Chng, Chee-Kong Chui, Shengdun Zhao

    The predictive energy management (PEM) of four-wheel drive (4WD) battery electric vehicles (BEVs) requires high accuracy in the driving information forecast of velocity and road gradient. In this paper, a meta-learning-based driving information prediction (DIP) method is proposed aiming to improve the performances of real-time PEM of 4WD-BEVs with a dual-electric machine (EM) driving system in each wheel. The proposed meta-learning-based DIP method is demonstrated to have higher accuracy, better robustness and faster computation speed by testing on collected real-world driving cycles. Then, a novel PEM method is proposed based on the model predictive controller (MPC), the reference projection of which is generated by the proposed meta-learning predictor. Our PEM strategy applies dynamic programming (DP) to solve the optimal control problem. The practicability of the proposed PEM method is analyzed in regard to the model accuracy, robustness to disturbances, generalization ability and real-time applicability. The proposed PEM method takes both the power distribution between the front and rear axles and that between two motors in each wheel into consideration. The simulation results reveal that the state-of-charge (SOC) declination of the proposed PEM method is better than the benchmark by 2.66% to 3.64%.


  • Real-Time Eco-Driving Control With Mode Switching Decisions for Electric Trucks With Dual Electric Machine Coupling Propulsion

    by Wei Du, Nikolce Murgovski, Fei Ju, Jingzhou Gao, Shengdun Zhao, Zhenhao Zheng

    This paper proposes a locally convergent, computationally efficient model predictive controller with mode switching decisions for the eco-driving problem of electric trucks. The problem is formulated as a bi-level program where the high-level optimises the speed trajectory and operation mode implicitly, while the low-level computes an explicit policy for power distribution of two electric machines. The alternating direction method of multipliers (ADMM) is employed at the high-level to obtain a locally optimal solution considering both speed optimisation and integer switching decisions. Simulation results indicate that the ADMM operates the powertrain with 0.9% higher total cost and 0.86% higher energy consumption than the global optimum obtained by dynamic programming for a quantised version of the same problem. Compared to a benchmark solution that maintains a constant velocity, the ADMM, running in a model predictive control framework (ADMM_MPC), operates the powertrain with a 8.77% lower total cost and 10.3% lower energy consumption, respectively. The average time for each ADMM_MPC update is 4.6ms on a standard PC, indicating its suitability for real-time control. Simulation results also show that the prediction errors of speed limits and road slope in ADMM_MPC cause only 0.12%-0.56% performance degradation.


  • Stochastic Model Predictive Energy Management of Electric Trucks in Connected Traffic

    by Wei Du, Nikolce Murgovski, Fei Ju, Jingzhou Gao, Shengdun Zhao

    This paper proposes a cost-effective power management strategy utilizing the data provided by V2I communication techniques for dual electric machine coupling propulsion trucks. We formulate a bilevel program where the high-level optimizes operation mode implicitly, while the low-level computes an explicit policy for power distribution of two electric machines. Stochastic model predictive control (SMPC) strategy is employed at the high-level, the performance of which highly depends on the prediction accuracy of future driving information. To establish a position-dependent stochastic velocity predictor using limited amount of historical data, two improved approaches are developed: 1) Predictor using multiple features; 2) Predictor combining data and model. Simulations are performed to validate the performance of the proposed predictors compared with a benchmark. The results show that the controllers using the proposed predictors can reduce driving cost by 3.36 % and 4.26 %, respectively.


  • A Novel Claw Pole Motor With Soft Magnetic Composites

    by Wei Du, Shengdun Zhao, Haixia Zhang, Mimi Zhang, Jingzhou Gao

    The integrated starter generator used in micro hybrid electric vehicle is usually claw pole motor. The claw pole core in the motor is forged by low carbon steel, which is of complex technology and the eddy current loss of the whole conductor in the magnetic field is large. To solve these problems, a novel claw pole motor is proposed in this article, which uses iron-based soft magnetic composites to prepare claw pole core and to insert permanent magnet between claw poles. By studying the preparation process parameters of iron-based soft magnetic composites, it is found that the mechanical properties and magnetic properties of the soft magnetic composites are the best under 700 MPa pressing pressure and 500 °C annealing temperature. A prototype is designed and manufactured, and its power generation and starting performance are tested, which can meet the performance requirements of 48 V micro hybrid system.


  • Parameter optimization of rule-based control strategy for multi-mode hybrid electric vehicle

    by Wei Du, Shengdun Zhao, Liying Jin, Jinzhou Gao, Hao Li

    Multi-mode hybrid electric vehicle is considered as the best hybrid power solution because it has many operational modes and can achieve a wider and more efficient transmission range. But at the same time, it also brings some problems, such as the choice of operational mode. At present, the most commonly used mode-switching strategy is rule-based control strategy, but it needs to determine the logical threshold value of each control variable in advance. Usually these values are determined by experience, but cannot guarantee that the value obtained is the optimal solution. This paper combines the improved NSGA_II algorithm with the rule-based control strategy and optimizes the logic threshold value by using the improved NSGA_II algorithm to get the optimal logic threshold value. Combining the optimized rule-based control strategy with the minimum equivalent fuel consumption strategy, a real-time control strategy for multi-mode hybrid electric vehicle is proposed. The advantages of the proposed control strategy are proved by an example.