Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuepeng Zhang has a total of 144 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Geometry-engineered ion transport enables over 4000-h salt-free solar evaporation using Janus electrospun membranes

    by Xi Zhang, Omar A. Kazi, Yue Feng, Bratin Sengupta, Yan Zhao, Jeffrey W. Elam, Yuepeng Zhang, Seth B. Darling

    Salt accumulation and surface fouling remain major barriers to long-term solar-driven interfacial evaporation. Here we report a geometry-engineered Janus electrospun membrane that integrates asymmetric wetting with structural design to suppress salt buildup. The membrane combines a hydrophobic carbon black–polystyrene photothermal layer for broadband solar absorption and localized heating with a hydrophilic polyacrylonitrile transport layer and a cotton scaffold ensuring continuous capillary water supply. A systematic comparison of nine geometries fabricated from the same membrane reveals that evaporator geometry governs heat localization, ion transport pathways, and salinity tolerance. Among different configurations, an inverted-cone architecture exhibits exceptional durability, sustaining evaporation fluxes of 1.03–1.36 kg m⁻² h⁻¹ and solar thermal conversion efficiencies of 70%–92% under 1-sun illumination in 3.5 wt% NaCl without visible salt deposition for over 4224 h. These findings reveal macroscopic geometry-controlled ion transport as a key design principle for scalable, salt-resistant solar evaporation.

  • Open Access

    Toward bridging the gap between lab discovery and high-throughput synthesis: synthesis of nitrogen-doped PtNi nanocatalysts using a multichannel continuous flow reactor with preheated solvent

    by Pengxi Zhu, Natalie E. Hooven, Huiyi Mei, Yuzi Liu, Elena Shevchenko, Jianlin Li, Yuepeng Zhang, Jie Li

    Platinum-nickel (PtNi) nanocatalysts are among the most promising electrocatalysts, yet translating laboratory syntheses to gram-scale production with preserved activity and durability remains challenging. Here we report the development of a multichannel continuous-flow reactor via integrating "hot injection" and "heat-up" method that enables high-throughput synthesis of nitrogen-doped PtNi (PtNi:N) nanoparticles (NPs) with tight control over nucleation, growth, and phase evolution. We show that control over residence time and precursor concentration enables the control of the average particle size in the range from 78 nm to 4 nm. The solvent preheating is found to facilitate the separation of nucleation step from growth, narrowing the distribution and favoring the formation of smaller NPs. Post-synthesis annealing at 185 °C effectively removed surface ligands without sintering of NPs and nitriding in a gas-fluidized bed promoted ordering of the alloy and it’s doping. The optimized process delivered ~10 g of PtNiN/C per ~2 h run while maintaining lab-to-pilot reproducibility: TEM showed uniformly dispersed ~5-6 nm particles in both lab-scale (0.5 g) and scaled batches (5 g/h), dynamic light scattering indicated stable hydrodynamic diameters during extended operation, and XRD patterns were invariant upon scale-up. Electrochemical testing demonstrated high oxygen-reduction activity, comparable to state-of-the-art Pt-alloy benchmarks and superior to commercial Pt/C on a mass-activity basis. Finally, we use machine learning to develop a surrogate model to prescreen the parameter space in synthesis of NPs with controllable sizes in an effort to increase our experimental efficiency. Collectively, these results establish solvent-preheated continuous flow as a practical route to reproducible, gram-scale manufacturing of ordered PtNiN PEMFC catalysts and provide a foundation for data-driven optimization toward future industrial deployment.

  • Top Cited Papers

    A large-scale stretchable neuromorphic circuit for on-body edge computing

    by Songsong Li, Zixuan Zhao, Max Weires, Shiyu Hu, Yang Li, Lingfeng Tang, Shilei Dai, Yahao Dai, Youdi Liu, Nan Li, et al.


  • Open Access

    Formation of Non-Doped Cubic Lithium Lanthanum Zirconium Oxide Nanofibers: Insights from In Situ Synchrotron X-Ray Scattering

    by Guanyi Wang, Byeongdu Lee, Devon Powers, Meghan Burns, Young-Geun Lee, Michael C. Tucker, Jeong Seop Yoon, Pallab Barai, Yuzi Liu, Venkat Srinivasan, et al.

    This study investigates the formation mechanism of non-doped cubic lithium lanthanum zirconium oxide (c-LLZO) nanofibers using in situ synchrotron X-ray scattering techniques. Electrospun polymer precursor nanofibers were annealed at temperatures up to 800 °C, enabling real-time tracking of phase transitions via simultaneous small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), and evolved CO2 gas analysis. The results reveal a three-step transformation pathway: polymer decomposition, formation of La2Zr2O7 (LZO), and direct conversion of LZO to c-LLZO without intermediate tetragonal phases detected within the sensitivity of our in situ WAXS measurement. Cryo-electron energy loss spectroscopy (EELS) further elucidates the role of lithium diffusion, showing Li enrichment at fiber surfaces and Li deficiency in the interior, which stabilizes the cubic phase. This Li segregation effect in nanostructured LLZO materials extends beyond the previously reported size effect. This work advances the understanding of c-LLZO formation mechanisms and provides practical insights for optimizing synthesis routes to achieve phase-pure c-LLZO for solid-state battery applications.


  • Open Access

    Accelerating Discovery to Deployment: Argonne's Materials Engineering Research Facility (MERF) and Its Role in Scaling Materials Technologies for Water and Resource Solutions

    by Yuepeng Zhang, Bratin Sengupta, Xiaoao Shi, Haihui Pu, Jeffrey W. Elam, Gregory K. Krumdick, Jessica Durham Macholz, Allison Bennett Irion, Junhong Chen, Seth B. Darling

    The U.S. Department of Energy (DOE) national laboratories represent a unique class of government‐owned, contractor‐operated research institutions dedicated to conducting research and development (R&D) related activities that address national priorities, supporting and advancing the DOE mission. They play a vital role in sustaining U.S. innovation capacity, stewarding the nation's technical base, and nurturing science and technologies. In this perspective, we highlight the processing science and scaleup capabilities of the Materials Engineering Research Facility (MERF) at DOE's Argonne National Laboratory to demonstrate how DOE National Laboratories bridge fundamental science and applied technology development to accelerate deployment. Case studies are presented on selective membranes for critical mineral recovery, sensors for per‐ and polyfluoroalkyl substances (PFAS) detection, surface functionalization via atomic layer deposition (ALD) and sequential infiltration synthesis (SIS), and lithium recovery from battery recycling waste streams using a novel electrodialysis process. These examples underscore MERF's role in translating innovative technologies into practical solutions for renewable water and critical resource recovery, which also leverage Argonne's analytical and computational capabilities. This perspective also outlines mechanisms for collaborating with the DOE national laboratories to strengthen partnerships across government, the national laboratories, academia, and industry.

  • Open Access

    Scalable Layer‐by‐Layer Electrospray‐Assisted Interfacial Polymerization: Enabling Large‐Area Polyamide Membrane Fabrication

    by Yue Feng, Feng Gao, Mert Can Hacifazlioglu, Jason Zhao, Jeffrey R. McCutcheon, Yuepeng Zhang

    Layer‐by‐layer electrospray‐assisted interfacial polymerization (LBL‐EAIP) has recently been proposed as an alternative approach for fabricating polyamide membranes with precisely controlled thickness and polymerization degree, showing great potential for reverse osmosis (RO) membrane synthesis. In this article, we report a scale‐up strategy for LBL‐EAIP to enable its practical application in RO membrane manufacturing. A multi‐jet electrospray apparatus was developed, and the device configuration and process parameters were carefully adjusted to produce polyamide‐on‐polyethersulfone thin film composite (TFC) membranes with consistently high salt rejection and water permeance across the membrane area. Specifically, an average 97.1% NaCl rejection from a 2000 ppm NaCl feed was achieved with an area‐to‐area deviation of 1%, along with a deionized water permeance of 0.90 ± 0.11 LMH/bar at 15 bar feed pressure. In addition, a Fourier‐transform infrared spectroscopy (FTIR)‐based analytical method was developed for semi‐quantitative assessment of membrane thickness and compositional uniformity, enabling rapid mapping of film microstructure and chemical variations. This work provides a pathway to scale up LBL‐EAIP technology, bridging the gap between laboratory‐scale innovation and industrial‐scale manufacturing.


  • Open Access

    Recent Progress in Solid‐State Lithium Batteries through Cathode Microstructure Engineering

    by Hyunji Park, Samuel David Miller, Guanyi Wang, Yue Feng, Jianlin Li, Yuepeng Zhang, Zhenxing Feng

    A high‐performance cathode is necessary to realize the great potentials of solid‐state batteries such as high energy density and long cycle life. It is also needed to validate electrolyte performance, which is lacking. Currently, cathodes for solid‐state batteries are thinner and have lower cathode active material content than their lithium‐ion battery counterpart, resulting from insufficient conductivity and limiting the battery energy density. This review article provides an overview of recent development in cathode microstructures and their impact on battery properties, including compatibility between cathode and electrolyte, cathode architecture design, interface engineering, correlation between material properties, cathode processing approaches, and performance, as well as the advanced characterization methods used to understand the above correlations . Some perspectives on future development are shared including utilizing in situ and operando characterization tools to better understand dynamic evolution of the cathode/electrolyte interface, adapting artificial intelligence and machine learning to design and optimize cathode structures. The article is aimed to promote research interest on cathode development and advance solid‐state battery technologies.


  • Open Access

    Tunable 3D Aerosol Jet Printing of Low‐Power Redox‐Gated Transistors with Multicomponent Inks

    by Andrew J. Erwin, Shiyu Hu, Hua Zhou, Samuel D. Miller, Evan J. Musterman, Andrew M. Kiss, Yang Yang, Yuepeng Zhang, Wei Chen

    Printed hybrid electronics (PHE) offer a promising alternative for microelectronics fabrication, addressing some limitations of traditional subtractive manufacturing. Despite the versatility of PHE, particularly in the customization of printing inks, these devices have not yet matched the performance of silicon‐based electronics due to challenges in gating mechanisms and operational stability. However, the potential of low‐voltage redox‐gating to achieve significant carrier modulations in correlated metal oxides remains unexplored in PHE. This study systematically investigates vanadium dioxide (VO2) nanoparticles and redox inks, linking their organization in solution to their morphology, phase state, and properties in solid films and multilayered structures. Using an aerosol jet printer (AJP), a solid‐state VO2 transistor is fabricated, operating at just 0.4 V gating voltage. The printed VO2 films demonstrate redox‐modulated conductivity and consistent transistor behavior. The solid‐state redox gating materials also provide long‐term stability, with the device maintaining performance over 6000 cycles without degradation. These results highlight the potential of redox gating to enhance the application of functional nanoparticles in printed hybrid microelectronics, especially for flexible, low‐voltage, and energy‐efficient devices.


  • Open Access

    Autonomous Synthesis and Inverse Design of Electronic Polymers with High Efficiency and Accuracy

    by Yukun Wu, Aikaterini Vriza, Doga Ozgulbas, Rafael Vescovi, Jianing Zhou, Zhiyang Wang, Shiyu Hu, Yuepeng Zhang, Qiaomu Yang, Anna Österholm, et al.

    The design and synthesis of functional polymers, aimed at targeted properties through specific structures, has long been challenged by their complex and often nonlinear structure-property relationships. Key processes, including knowledge accumulation for predictive design and experimental refinement and validation, are traditionally labor-insensitive and time-consuming, making it difficult to balance accuracy and efficiency. Here, we introduce an accelerated, autonomous system for the on-demand synthesis of electronic polymers that achieves desired electrochromic functionality with high accuracy and efficiency. Our approach leverages large language model-assisted data mining, a physics-informed copolymer machine learning model, and an AI-driven autonomous robotic workflow in the Polybot lab. Within 72 hours, Polybot autonomously synthesized electrochromic polymers with targeted, unreported color values, including green polymers with specific absorption profiles, precisely fine-tuning copolymer structures with a 5% step size in comonomer composition within a three-monomer system. A publicly accessible electrochromic polymer informatics database has also been created to foster knowledge exchange.


  • Open Access

    Large-scale stretchable neuromorphic circuits for on-body edge processing of sensory data

    by Songsong Li, Zixuan Zhao, Max Weires, Shiyu Hu, Yang Li, Lingfeng Tang, Shilei Dai, Yahao Dai, Youdi Liu, Nan Li, et al.

    The rapid development of intrinsically stretchable electronics for use on the human bodies and robots has significantly enhanced the ability to collect multi-modal data at high spatiotemporal resolutions, over extended periods, and across diverse body locations. This progress has generated a growing demand for enhanced computing capabilities to process sensory data, making near-sensor edge computing an attractive solution. Stretchable organic electrochemical transistors (OECTs) have been demonstrated to be as a viable platform for integrating neuromorphic edge computing functions into these human-interfaced systems. However, the lack of a scalable fabrication method for stretchable OECT arrays and circuits has limited the achievable computing complexity. Here, we address this limitation through synergistic innovations in material designs and device fabrication processes, enabling large-scale, intrinsically stretchable OECT arrays with a high density of up to 10,000 transistors per cm2. These OECT devices exhibit good synaptic performance in terms of linear, precise, and repeatable programming of conductance states, as well as a good retention time. With high performance uniformity at these integration levels, we have unprecedentedly utilized a stretchable circuit to achieve the hardware implementation of artificial neural network (ANN) for processing health data, including physiological data for heart-attack risk assessment and kernel convolution for locating propagation wavefronts in cardiac ventricular fibrillation. Additionally, we explored the potential of implementing reinforcement learning algorithms for robotic applications.