Yong Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yong Cheng has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
Yiming Wen
Faculty of Metallurgy and Mining Kunming Metallurgy University Kunming China
6 shared publications- Qi Nie
Faculty of Metallurgy and Mining Engineering, Kunming Metallurgy College, Kunming 650033, China
4 shared publications - Saihua Xu
Faculty of Land and Resource Engineering, Kunming University of Science and Technology, Kunming 650093, China
4 shared publications - Xiangdong Niu
Faculty of Metallurgy and Mining Engineering, Kunming Metallurgy College, Kunming 650033, China
4 shared publications Cong Liu
Kunming Metallurgy College, Faculty of Metallurgy and Mining, Yun Nan, China
3 shared publications- Yuzhao Hu
Faculty of Land and Resource Engineering, Kunming University of Science and Technology, Kunming 650093, China
3 shared publications
Latest Publications
- 9 September 2026
- Published by Wiley in Geological Journal
Mechanisms of Initial Enrichment of Organic Matter and Metallogenic Elements in Black Rock Series: Evidence From the Lower Cambrian Zhalagou Formation, Eastern Guizhou, China
Black rock series enriched in organic matter and metallogenic elements are potential source rocks for Mississippi Valley‐Type (MVT) Pb–Zn deposits, yet their syn‐sedimentary co‐enrichment mechanism remains unclear. This study uses TOC, major/trace elements, REE, TIMA, and SEM‐EDS analyses to investigate the lower shales of the Cambrian Zhalagou Formation in eastern Guizhou. The aim is to characterise the paleo‐sedimentary environment, identify the controls on organic matter enrichment, and determine the sources of metals. The results show an average TOC of 1.63% and strong enrichment of Ba (EF = 52) and Mo (EF = 16). Positive Eu anomalies (average δEu = 1.35) and low Y/Ho ratios indicate hydrothermal activity. Mo/TOC and U–Mo covariation suggest an anoxic–euxinic, semi‐restricted water column, which is further supported by framboidal pyrite sizes (3.75–6.05 μm). Low P/Ti ratios indicate low paleoproductivity. However, the positive TOC–Ni ex correlation and the nonlinear δEu response imply that moderate hydrothermal input enhanced reducibility and nutrient supply, thereby favouring organic preservation. Excessive input, in contrast, caused dilution. Ba, Cu, Zn, and Pb are mainly hydrothermal in origin, Mo is seawater‐derived, and Ni is multi‐sourced. We propose a coupled model of ‘tectonic triggering – hydrothermal driving – environmental conditioning – biological participation’: Late Ediacaran–Early Cambrian extension reactivated faults, allowing hydrothermal fluids to ascend, bringing metallogenic elements and reinforcing reducing conditions in a semi‐restricted stratified basin, thus leading to synchronous initial enrichment of organic matter and sulfides. This model links organic matter to MVT mineralisation at the source rock stage.
- 9 September 2026
- Published by Wiley in Geological Journal
Mechanisms of Initial Enrichment of Organic Matter and Metallogenic Elements in Black Rock Series: Evidence From the Lower Cambrian Zhalagou Formation, Eastern Guizhou, China
Black rock series enriched in organic matter and metallogenic elements are potential source rocks for Mississippi Valley‐Type (MVT) Pb–Zn deposits, yet their syn‐sedimentary co‐enrichment mechanism remains unclear. This study uses TOC, major/trace elements, REE, TIMA, and SEM‐EDS analyses to investigate the lower shales of the Cambrian Zhalagou Formation in eastern Guizhou. The aim is to characterise the paleo‐sedimentary environment, identify the controls on organic matter enrichment, and determine the sources of metals. The results show an average TOC of 1.63% and strong enrichment of Ba (EF = 52) and Mo (EF = 16). Positive Eu anomalies (average δEu = 1.35) and low Y/Ho ratios indicate hydrothermal activity. Mo/TOC and U–Mo covariation suggest an anoxic–euxinic, semi‐restricted water column, which is further supported by framboidal pyrite sizes (3.75–6.05 μm). Low P/Ti ratios indicate low paleoproductivity. However, the positive TOC–Ni ex correlation and the nonlinear δEu response imply that moderate hydrothermal input enhanced reducibility and nutrient supply, thereby favouring organic preservation. Excessive input, in contrast, caused dilution. Ba, Cu, Zn, and Pb are mainly hydrothermal in origin, Mo is seawater‐derived, and Ni is multi‐sourced. We propose a coupled model of ‘tectonic triggering – hydrothermal driving – environmental conditioning – biological participation’: Late Ediacaran–Early Cambrian extension reactivated faults, allowing hydrothermal fluids to ascend, bringing metallogenic elements and reinforcing reducing conditions in a semi‐restricted stratified basin, thus leading to synchronous initial enrichment of organic matter and sulfides. This model links organic matter to MVT mineralisation at the source rock stage.
- Open Access
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3310 (1) , 012032
Liberation characteristics of sulfide copper ore and their implications for mineral processing: an investigation using TIMA
To facilitate the efficient utilization of low-grade sulfide copper ore resources, this study systematically analyzed the liberation characteristics of major minerals using a Tescan Integrated Mineral Analyzer (TIMA) for a typical ore from a Yunnan deposit, ground to an optimal fineness of 75 % passing 74 μm. The results indicate that at this grinding fineness, the target minerals, chalcopyrite and pyrite, are well liberated, with particles achieving liberation degrees of ⩾75% of 78.85 % and 91.26 %, respectively. However, the incompletely liberated portions primarily exist as middlings. Chalcopyrite is mainly locked with pyrite and quartz, while pyrite is predominantly associated with pyrrhotite, quartz, and chalcopyrite. Such locking relationships are key factors affecting flotation selectivity and leading to mutual contamination of concentrates. Consequently, the study recommends further optimization of the flotation reagent regime and an evaluation of the need for staged grinding and separation processes in subsequent beneficiation, aiming to selectively liberate middlings and mitigate the slime-coating effect caused by the high quartz content. This research provides direct process mineralogical guidance for optimizing the beneficiation of similar ores.
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3310 (1) , 012032
Open AccessLiberation characteristics of sulfide copper ore and their implications for mineral processing: an investigation using TIMA
To facilitate the efficient utilization of low-grade sulfide copper ore resources, this study systematically analyzed the liberation characteristics of major minerals using a Tescan Integrated Mineral Analyzer (TIMA) for a typical ore from a Yunnan deposit, ground to an optimal fineness of 75 % passing 74 μm. The results indicate that at this grinding fineness, the target minerals, chalcopyrite and pyrite, are well liberated, with particles achieving liberation degrees of ⩾75% of 78.85 % and 91.26 %, respectively. However, the incompletely liberated portions primarily exist as middlings. Chalcopyrite is mainly locked with pyrite and quartz, while pyrite is predominantly associated with pyrrhotite, quartz, and chalcopyrite. Such locking relationships are key factors affecting flotation selectivity and leading to mutual contamination of concentrates. Consequently, the study recommends further optimization of the flotation reagent regime and an evaluation of the need for staged grinding and separation processes in subsequent beneficiation, aiming to selectively liberate middlings and mitigate the slime-coating effect caused by the high quartz content. This research provides direct process mineralogical guidance for optimizing the beneficiation of similar ores.
- Open Access
Field-Constrained Screening of High-Displacement Scenarios in Deep Goaf Groups Using Latin Hypercube Sampling (LHS)-FLAC3D and Static Bayesian Inference
Deep metal mines commonly contain vertically stacked goafs whose geometry and rock mass properties are incompletely documented. This study evaluates a field-constrained screening framework for high-displacement material scenarios at the Lehong Pb-Zn mine. The framework combines a Latin hypercube sampling (LHS)-FLAC3D response library with static Bayesian inference. Evidence comprised 93 goaf records, 186 Mathews exposed-surface assessments, laboratory constraints, and 40 archived numerical scenarios, whose maximum downward displacement ranged from 4.48 to 31.75 cm. Friction angle φ showed the strongest marginal Pearson correlation with displacement (r = −0.81), followed by cohesion (r = −0.55) and elastic modulus (r = −0.22). At the response library Q75 threshold of 15.04 cm, the Laplace-smoothed probability increased from 0.262 (95% credible interval, 0.142–0.403) across all scenarios to 0.600 (0.352–0.824) under joint cohesion–friction angle degradation. However, the archived design was not an ideal 40-point LHS, and bootstrap resampling retained the scenario ordering in only 45.8–54.8% of replicates. All 93 inventory identifiers matched the Mathews stability table, enabling reproducible site-level triage when Bayesian network results are combined with treatment and stability evidence. The framework is an exploratory screening tool rather than an absolute failure probability model, collapse propagation model, or dynamic early warning system.
Open AccessField-Constrained Screening of High-Displacement Scenarios in Deep Goaf Groups Using Latin Hypercube Sampling (LHS)-FLAC3D and Static Bayesian Inference
Deep metal mines commonly contain vertically stacked goafs whose geometry and rock mass properties are incompletely documented. This study evaluates a field-constrained screening framework for high-displacement material scenarios at the Lehong Pb-Zn mine. The framework combines a Latin hypercube sampling (LHS)-FLAC3D response library with static Bayesian inference. Evidence comprised 93 goaf records, 186 Mathews exposed-surface assessments, laboratory constraints, and 40 archived numerical scenarios, whose maximum downward displacement ranged from 4.48 to 31.75 cm. Friction angle φ showed the strongest marginal Pearson correlation with displacement (r = −0.81), followed by cohesion (r = −0.55) and elastic modulus (r = −0.22). At the response library Q75 threshold of 15.04 cm, the Laplace-smoothed probability increased from 0.262 (95% credible interval, 0.142–0.403) across all scenarios to 0.600 (0.352–0.824) under joint cohesion–friction angle degradation. However, the archived design was not an ideal 40-point LHS, and bootstrap resampling retained the scenario ordering in only 45.8–54.8% of replicates. All 93 inventory identifiers matched the Mathews stability table, enabling reproducible site-level triage when Bayesian network results are combined with treatment and stability evidence. The framework is an exploratory screening tool rather than an absolute failure probability model, collapse propagation model, or dynamic early warning system.
- Open Access
- 1 May 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3244 (1)
Mineralogical characterization of copper and sulfur concentrates from sulfide Copper ore and its implications for flotation optimization
This study focuses on the beneficiation products of a sulfide copper ore from Yunnan. By integrating chemical multi-element analysis and TIMA (Tescan Integrated Mineral Analyzer) automated mineral quantitative analysis, the elemental distribution and mineral composition of the copper and sulfur concentrates were accurately determined. The results indicate that the primary copper mineral in the copper concentrate is chalcopyrite (62.84%), accompanied by a significant content of pyrite (29.07%), resulting in a copper grade of 22.06%. The sulfur concentrate is predominantly composed of pyrite (91.26%), with a copper content as low as 0.135%, demonstrating high efficiency in copper-sulfur separation. TIMA analysis further revealed key mineralogical factors affecting product quality, including the entrainment of pyrite and the distribution of gangue minerals. Based on these findings, process optimization strategies are proposed, including regrinding and optimization of depressant regimes to enhance concentrate grade, as well as pathways for the comprehensive recovery of associated valuable elements. This study provides essential mineralogical data and theoretical support for the efficient separation and comprehensive utilization of similar ores.
- 1 May 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3244 (1)
Open AccessMineralogical characterization of copper and sulfur concentrates from sulfide Copper ore and its implications for flotation optimization
This study focuses on the beneficiation products of a sulfide copper ore from Yunnan. By integrating chemical multi-element analysis and TIMA (Tescan Integrated Mineral Analyzer) automated mineral quantitative analysis, the elemental distribution and mineral composition of the copper and sulfur concentrates were accurately determined. The results indicate that the primary copper mineral in the copper concentrate is chalcopyrite (62.84%), accompanied by a significant content of pyrite (29.07%), resulting in a copper grade of 22.06%. The sulfur concentrate is predominantly composed of pyrite (91.26%), with a copper content as low as 0.135%, demonstrating high efficiency in copper-sulfur separation. TIMA analysis further revealed key mineralogical factors affecting product quality, including the entrainment of pyrite and the distribution of gangue minerals. Based on these findings, process optimization strategies are proposed, including regrinding and optimization of depressant regimes to enhance concentrate grade, as well as pathways for the comprehensive recovery of associated valuable elements. This study provides essential mineralogical data and theoretical support for the efficient separation and comprehensive utilization of similar ores.
- Open Access
Multi-Scale Process Mineralogy of Cd and Ag in a Pb-Zn Ore: Implications for Recovery Optimization
Efficient recovery of critical metals from complex polymetallic ores relies on clarifying their mineralogical occurrence. A Cd-Ag-rich Pb-Zn ore from southwestern China was investigated via a multi-scale process mineralogy approach integrating reflected-light microscopy, TIMA and LA-ICP-MS. Systematic analysis was conducted on ore texture, mineral liberation characteristics, and the occurrence and distribution of Ag and Cd. The ore is a medium–low grade Pb-Zn deposit (Pb 0.81%, Zn 4.33%) with economically recoverable associated Cd (0.066%) and Ag (5.04 ppm), dominated by sphalerite (7.74%), galena (1.39%), pyrite (3.92%), quartz (47.80%) and calcite (18.66%). TIMA analysis revealed poor liberation of sphalerite and galena, with fully liberated particles accounting for <30%. LA-ICP-MS results showed that Cd is highly enriched in sphalerite (average 5982 ppm, 98%) mainly in isomorphous form, while Ag is dispersed in pyrite (average 178 ppm, 56%), galena (average 227 ppm, 25%) and sphalerite (average 31 ppm, 19%), also primarily as isomorphs; partial Cd in pyrite occurs as micro-inclusions. The multi-scale mineralogical data provide a scientific basis for resource utilization, indicating the necessity of fine grinding and differentiated recovery strategies: “zinc depression followed by lead flotation” for Pb-Zn recovery, the establishment of a comprehensive Ag recovery system with Pb-Zn-Fe as carriers for Ag recovery, and “Zn-carried Cd” flotation for Cd recovery. This study verifies the effectiveness of combined TIMA and LA-ICP-MS in elucidating critical metal occurrence, and provides a mineralogy-based process design for the sustainable processing of such complex ores.
Open AccessMulti-Scale Process Mineralogy of Cd and Ag in a Pb-Zn Ore: Implications for Recovery Optimization
Efficient recovery of critical metals from complex polymetallic ores relies on clarifying their mineralogical occurrence. A Cd-Ag-rich Pb-Zn ore from southwestern China was investigated via a multi-scale process mineralogy approach integrating reflected-light microscopy, TIMA and LA-ICP-MS. Systematic analysis was conducted on ore texture, mineral liberation characteristics, and the occurrence and distribution of Ag and Cd. The ore is a medium–low grade Pb-Zn deposit (Pb 0.81%, Zn 4.33%) with economically recoverable associated Cd (0.066%) and Ag (5.04 ppm), dominated by sphalerite (7.74%), galena (1.39%), pyrite (3.92%), quartz (47.80%) and calcite (18.66%). TIMA analysis revealed poor liberation of sphalerite and galena, with fully liberated particles accounting for <30%. LA-ICP-MS results showed that Cd is highly enriched in sphalerite (average 5982 ppm, 98%) mainly in isomorphous form, while Ag is dispersed in pyrite (average 178 ppm, 56%), galena (average 227 ppm, 25%) and sphalerite (average 31 ppm, 19%), also primarily as isomorphs; partial Cd in pyrite occurs as micro-inclusions. The multi-scale mineralogical data provide a scientific basis for resource utilization, indicating the necessity of fine grinding and differentiated recovery strategies: “zinc depression followed by lead flotation” for Pb-Zn recovery, the establishment of a comprehensive Ag recovery system with Pb-Zn-Fe as carriers for Ag recovery, and “Zn-carried Cd” flotation for Cd recovery. This study verifies the effectiveness of combined TIMA and LA-ICP-MS in elucidating critical metal occurrence, and provides a mineralogy-based process design for the sustainable processing of such complex ores.
- Open Access
Study on the Disintegration Resistance of Different Types of Schist on the Eastern Slope of the Tongman Open-Pit Mine
This study aimed to investigate the disintegration resistance of schist on the eastern slope of the Tongman open-pit mine. It examined the effects of cycle number and mineral composition on the disintegration resistance indexes of four types of schist through thin section identification and laboratory disintegration resistance tests. Furthermore, we analyzed the morphological characteristics of the disintegration residues using laboratory tests. Based on pore micro-damage theory, the mechanisms responsible for the differences in disintegration resistance among the four types of schist were further explored. The results show a negative correlation between the disintegration resistance index and the number of cycles. For the same number of cycles, the disintegration resistance indices for the four schist types were ranked as follows: greenish-gray chlorite-bearing muscovite schist > gray weakly chloritized biotite–muscovite schist > greenish-gray muscovite schist > gray muscovite schist. The disintegration residues of schist samples were categorized into four morphological patterns: thin sheet-like, moderately thick sheet-like, blocky, and granular. These patterns were then thoroughly elucidated. The differences in the disintegration resistance characteristics of schist were closely related to their material composition. The microstructural pore damage within the rock is the essential factor causing schist disintegration. Variations in rock porosity led to differing damage factors, which explain the distinct disintegration resistance characteristics observed across the four types of schist. The proposed preventive measures, developed through a systematic analysis of schist disintegration mechanisms, provide an effective framework for slope stability management. This research offers valuable insights into the weathering characteristics of rock masses in slope engineering, which is significant for understanding the progressive failure modes of disintegrating metamorphic formations.
Open AccessStudy on the Disintegration Resistance of Different Types of Schist on the Eastern Slope of the Tongman Open-Pit Mine
This study aimed to investigate the disintegration resistance of schist on the eastern slope of the Tongman open-pit mine. It examined the effects of cycle number and mineral composition on the disintegration resistance indexes of four types of schist through thin section identification and laboratory disintegration resistance tests. Furthermore, we analyzed the morphological characteristics of the disintegration residues using laboratory tests. Based on pore micro-damage theory, the mechanisms responsible for the differences in disintegration resistance among the four types of schist were further explored. The results show a negative correlation between the disintegration resistance index and the number of cycles. For the same number of cycles, the disintegration resistance indices for the four schist types were ranked as follows: greenish-gray chlorite-bearing muscovite schist > gray weakly chloritized biotite–muscovite schist > greenish-gray muscovite schist > gray muscovite schist. The disintegration residues of schist samples were categorized into four morphological patterns: thin sheet-like, moderately thick sheet-like, blocky, and granular. These patterns were then thoroughly elucidated. The differences in the disintegration resistance characteristics of schist were closely related to their material composition. The microstructural pore damage within the rock is the essential factor causing schist disintegration. Variations in rock porosity led to differing damage factors, which explain the distinct disintegration resistance characteristics observed across the four types of schist. The proposed preventive measures, developed through a systematic analysis of schist disintegration mechanisms, provide an effective framework for slope stability management. This research offers valuable insights into the weathering characteristics of rock masses in slope engineering, which is significant for understanding the progressive failure modes of disintegrating metamorphic formations.
- Open Access
- 1 January 2025
- Published by Chinese Society for Mineralogy, Petrology, and Geochemistry in Acta Petrologica Sinica
- Vol. 41 (8) , 2616-2630
Geochemical characteristics and indicative significance of typical hydrothermal minerals from the newly discovered cobalt ore spot in Wuding, Yunnan Province, China.
位于扬子板块西南缘的康滇地区前寒武纪地层中发育全球著名的Fe-Cu-Co多金属成矿省,其中Fe、Cu成矿作用研究程度高,而Co成矿作用研究薄弱。本研究团队在该成矿省之滇中地区新发现的观天厂独立钴矿点(Co品位为0.03%~0.92%,Co资源潜力近1×104t)为研究钴成矿作用提供了新的载体。本次工作利用LA-ICPMS技术对钴矿石中热液矿物(石英、白云石和黄铜矿)开展了微区原位微量元素组成研究。结果表明,成矿早阶段和主成矿阶段石英(Qtz1和Qtz2)微量元组组成相似,均具有相对较高的Li、Mg、Al、P、Ti元素含量和较低的Ge、Rb、Sr、Ba、U元素含量,其中Al、Mg、Ti、Rb等元素可能主要是以微细独立矿物的形式赋存。主成矿阶段的白云石中Ca、Mn、Fe、Sr、Y、Ba和稀土元素(REE)含量较高,它们很可能主要以类质同象的形式存在。黄铜矿中Se、In、Sn、Pb、Bi和Ge元素含量较高,其中Pb、Bi和Ge等元素部分以独立矿物形式存在,其余元素则多以类质同象形式赋存。黄铜矿微量元素特征与SSC型铜矿床较为相近,即具有相对较高的Ge含量,以及较低的Co、Ni、Zn、Mo、Ag、Cd、Sb、Au、Tl含量,而不同于其他类型矿床。热液矿物原位微量元素组成显示,主成矿阶段热液具有温度>200℃、偏酸性还原环境特征,而成矿晚阶段则由还原环境转变为氧化环境。综上,观天厂钴矿点与SSC型铜矿床可能具有相似的成因,均属于沉积变质-热液矿床,钴矿化很可能是后期热液对区域内含钴地质体(包括海相火山岩地层以及IOCG、SSC型等富钴矿床等)的活化-迁移-再富集的产物。
- 1 January 2025
- Published by Chinese Society for Mineralogy, Petrology, and Geochemistry in Acta Petrologica Sinica
- Vol. 41 (8) , 2616-2630
Open AccessGeochemical characteristics and indicative significance of typical hydrothermal minerals from the newly discovered cobalt ore spot in Wuding, Yunnan Province, China.
位于扬子板块西南缘的康滇地区前寒武纪地层中发育全球著名的Fe-Cu-Co多金属成矿省,其中Fe、Cu成矿作用研究程度高,而Co成矿作用研究薄弱。本研究团队在该成矿省之滇中地区新发现的观天厂独立钴矿点(Co品位为0.03%~0.92%,Co资源潜力近1×104t)为研究钴成矿作用提供了新的载体。本次工作利用LA-ICPMS技术对钴矿石中热液矿物(石英、白云石和黄铜矿)开展了微区原位微量元素组成研究。结果表明,成矿早阶段和主成矿阶段石英(Qtz1和Qtz2)微量元组组成相似,均具有相对较高的Li、Mg、Al、P、Ti元素含量和较低的Ge、Rb、Sr、Ba、U元素含量,其中Al、Mg、Ti、Rb等元素可能主要是以微细独立矿物的形式赋存。主成矿阶段的白云石中Ca、Mn、Fe、Sr、Y、Ba和稀土元素(REE)含量较高,它们很可能主要以类质同象的形式存在。黄铜矿中Se、In、Sn、Pb、Bi和Ge元素含量较高,其中Pb、Bi和Ge等元素部分以独立矿物形式存在,其余元素则多以类质同象形式赋存。黄铜矿微量元素特征与SSC型铜矿床较为相近,即具有相对较高的Ge含量,以及较低的Co、Ni、Zn、Mo、Ag、Cd、Sb、Au、Tl含量,而不同于其他类型矿床。热液矿物原位微量元素组成显示,主成矿阶段热液具有温度>200℃、偏酸性还原环境特征,而成矿晚阶段则由还原环境转变为氧化环境。综上,观天厂钴矿点与SSC型铜矿床可能具有相似的成因,均属于沉积变质-热液矿床,钴矿化很可能是后期热液对区域内含钴地质体(包括海相火山岩地层以及IOCG、SSC型等富钴矿床等)的活化-迁移-再富集的产物。
- Open Access
- 29 September 2024
- Published by China Science Publishing & Media Ltd. in ACTA MINERALOGICA SINICA
- Vol. 45 (4) , 773-785
In situ S-Pb isotopic geochemical characteristics of sulfides in the Qingshuitang zinc deposit in the eastern Guizhou and their geological significances
清水塘锌矿床位于牛角塘Pb-Zn矿田东北部,矿体主要呈层状产于下寒武统清虚洞组(Є1q)白云岩中。该矿床围岩蚀变较弱,以白云石化、黄铁矿化和沥青化为主。矿石类型主要包括角砾状、块状、浸染状和脉状,其矿物组成简单,主要为闪锌矿、黄铁矿、白云石和沥青。清水塘锌矿床的研究薄弱,其限制了对牛角塘矿田矿床成因和成矿规律的整体认识。本次研究对清水塘锌矿床矿石硫化物进行了原位S-Pb同位素分析,以揭示成矿物质来源和成矿机制。硫化物富集重的硫同位素,δ34SV-CDT值为+26.89‰~+30.54‰(平均+28.55‰),其与围岩沥青中黄铁矿的硫同位素组成范围一致,表明硫最终来源于地层硫酸盐。硫化物铅同位素组成分析显示,该矿床成矿金属元素主要来源于下寒武统沉积地层(清虚洞组、牛蹄塘组和乌训组)和下伏变质基底的混合。清水塘锌矿床所在的牛角塘矿田在空间上与麻江大型古油藏重叠,其矿石和围岩中发育有大量的固体沥青,矿石中沥青与闪锌矿共生,暗示了油气有机质通过TSR还原硫酸盐可能为成矿贡献了大量还原硫。综合地质和地球化学的研究成果,本文认为清水塘锌矿床属于MVT铅锌矿床。
- 29 September 2024
- Published by China Science Publishing & Media Ltd. in ACTA MINERALOGICA SINICA
- Vol. 45 (4) , 773-785
Open AccessIn situ S-Pb isotopic geochemical characteristics of sulfides in the Qingshuitang zinc deposit in the eastern Guizhou and their geological significances
清水塘锌矿床位于牛角塘Pb-Zn矿田东北部,矿体主要呈层状产于下寒武统清虚洞组(Є1q)白云岩中。该矿床围岩蚀变较弱,以白云石化、黄铁矿化和沥青化为主。矿石类型主要包括角砾状、块状、浸染状和脉状,其矿物组成简单,主要为闪锌矿、黄铁矿、白云石和沥青。清水塘锌矿床的研究薄弱,其限制了对牛角塘矿田矿床成因和成矿规律的整体认识。本次研究对清水塘锌矿床矿石硫化物进行了原位S-Pb同位素分析,以揭示成矿物质来源和成矿机制。硫化物富集重的硫同位素,δ34SV-CDT值为+26.89‰~+30.54‰(平均+28.55‰),其与围岩沥青中黄铁矿的硫同位素组成范围一致,表明硫最终来源于地层硫酸盐。硫化物铅同位素组成分析显示,该矿床成矿金属元素主要来源于下寒武统沉积地层(清虚洞组、牛蹄塘组和乌训组)和下伏变质基底的混合。清水塘锌矿床所在的牛角塘矿田在空间上与麻江大型古油藏重叠,其矿石和围岩中发育有大量的固体沥青,矿石中沥青与闪锌矿共生,暗示了油气有机质通过TSR还原硫酸盐可能为成矿贡献了大量还原硫。综合地质和地球化学的研究成果,本文认为清水塘锌矿床属于MVT铅锌矿床。
- Open Access
- 1 February 2024
- Published by Elsevier in Ore Geology Reviews
- Vol. 165
Genetic link between Mississippi Valley-type (MVT) Pb–Zn mineralization and hydrocarbon accumulation in the Niujiaotang ore field, SW China
- 1 February 2024
- Published by Elsevier in Ore Geology Reviews
- Vol. 165
Open AccessGenetic link between Mississippi Valley-type (MVT) Pb–Zn mineralization and hydrocarbon accumulation in the Niujiaotang ore field, SW China
- 1 January 2024
- Published by Chinese Society for Mineralogy, Petrology, and Geochemistry in Acta Petrologica Sinica
- Vol. 40 (1) , 43-59
The enrichment characteristics of germanium and it's geological significance in the Banbianjie Ge-Zn deposit, Guizhou
锗(Ge)属于战略性关键矿产资源, 是众多高新技术领域的重要原材料。Ge主要以共/伴生形式产出于Zn、Pb和Cu等热液贱金属矿床和煤矿床中, 目前全球Ge资源主要来源于铅锌矿的副产品。近期取得较大找矿突破的半边街锌矿床(7.70Mt矿石, Zn平均品位5.1%)伴生有超大型规模的金属Ge(>900t @110×10-6), 然而Ge超常富集的机制不清。本次研究利用LA-ICPMS对闪锌矿进行了微区原位微量元素组成和Mapping分析, 以揭示Ge等元素的富集特征、赋存状态和替代方式, 探讨Ge的富集机制。分析结果表明, 半边街矿床闪锌矿中高含量(平均值>100×10-6)微量元素有Fe、Pb、Ge和Cd等, 较高含量(平均值100×10-6~10×10-6)的有Mn、Ga、Sn和Tl, 以及较低含量(平均值< 10×10-6)的有Ag、Cu、In和Sb。相比于各类型铅锌矿床, 半边街闪锌矿Ge超常富集(274×10-6~1938×10-6, 平均为1055×10-6, 达到1000倍富集)。该矿床中Ge以类质同象或纳米颗粒形式赋存于闪锌矿中。微量元素摩尔量相关性图揭示Ge替代Zn的方式以Ge4++Pb2+↔3Zn2+为主, 其次为nGe4++Mn2+↔(2n+1)Zn2+和nGe4++2Tl3+↔(2n+3)Zn2+。综合分析认为, 半边街矿床Ge可能来源于相对富Ge的前寒纪基底; 富有机质的盆地流体在Ge的搬运中发挥重要作用; Ge、Cd等稀散元素的共生分异制约了Ge的最终超常富集。因此, 半边街矿床中Ge的超常富集是"源、运、聚"复杂过程多要素耦合作用的结果。
- 1 January 2024
- Published by Chinese Society for Mineralogy, Petrology, and Geochemistry in Acta Petrologica Sinica
- Vol. 40 (1) , 43-59
The enrichment characteristics of germanium and it's geological significance in the Banbianjie Ge-Zn deposit, Guizhou
锗(Ge)属于战略性关键矿产资源, 是众多高新技术领域的重要原材料。Ge主要以共/伴生形式产出于Zn、Pb和Cu等热液贱金属矿床和煤矿床中, 目前全球Ge资源主要来源于铅锌矿的副产品。近期取得较大找矿突破的半边街锌矿床(7.70Mt矿石, Zn平均品位5.1%)伴生有超大型规模的金属Ge(>900t @110×10-6), 然而Ge超常富集的机制不清。本次研究利用LA-ICPMS对闪锌矿进行了微区原位微量元素组成和Mapping分析, 以揭示Ge等元素的富集特征、赋存状态和替代方式, 探讨Ge的富集机制。分析结果表明, 半边街矿床闪锌矿中高含量(平均值>100×10-6)微量元素有Fe、Pb、Ge和Cd等, 较高含量(平均值100×10-6~10×10-6)的有Mn、Ga、Sn和Tl, 以及较低含量(平均值< 10×10-6)的有Ag、Cu、In和Sb。相比于各类型铅锌矿床, 半边街闪锌矿Ge超常富集(274×10-6~1938×10-6, 平均为1055×10-6, 达到1000倍富集)。该矿床中Ge以类质同象或纳米颗粒形式赋存于闪锌矿中。微量元素摩尔量相关性图揭示Ge替代Zn的方式以Ge4++Pb2+↔3Zn2+为主, 其次为nGe4++Mn2+↔(2n+1)Zn2+和nGe4++2Tl3+↔(2n+3)Zn2+。综合分析认为, 半边街矿床Ge可能来源于相对富Ge的前寒纪基底; 富有机质的盆地流体在Ge的搬运中发挥重要作用; Ge、Cd等稀散元素的共生分异制约了Ge的最终超常富集。因此, 半边街矿床中Ge的超常富集是"源、运、聚"复杂过程多要素耦合作用的结果。