Vanessa de Souza Gomes
Research Subjects
Vanessa de Souza Gomes has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Patrícia Anjos Bittencourt Barreto-Garcia
State University of Southwest Bahia
3 shared publications - Carolina Souza Jarochinski e Silva
Department of Forest Sciences, Federal University of Lavras, P.O. Box 3037, Lavras 37200-000, MG, Brazil
2 shared publications - Jhuly Ely Santos Pereira
Veracel Celulose, Brasil
2 shared publications - Lucas Rezende Gomide
Federal University of Lavras, Brazil
2 shared publications - Rafael Nogueira Scoriza
Universidade Federal Rural do Rio de Janeiro, Brasil
2 shared publications - Adalberto Brito de Novaes
State University of Southwest Bahia
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in CERNE
- Vol. 31, e-103392
Optimization of queueing complexity in the forest transportation problem
Background: The principal challenge in forest transportation lies in minimizing the fleet of vehicles and cranes while adhering to operational constraints. Addressing this intricate operational issue yields numerous advantages. This research is dedicated to the development and evaluation of a controlling device designed to enhance timber logistics. A queue simulator is utilized to estimate prospective wait times for the optimized system. Two scenarios are analyzed: one integrating the controlling device and the other excluding it. The study underscores the advantages of vehicle type A, which, due to its higher number of wheelers and fewer cranes compared to vehicle type B, demonstrates greater efficacy in establishing a robust queuing system.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in CERNE
- Vol. 31, e-103392
Open AccessOptimization of queueing complexity in the forest transportation problem
Background: The principal challenge in forest transportation lies in minimizing the fleet of vehicles and cranes while adhering to operational constraints. Addressing this intricate operational issue yields numerous advantages. This research is dedicated to the development and evaluation of a controlling device designed to enhance timber logistics. A queue simulator is utilized to estimate prospective wait times for the optimized system. Two scenarios are analyzed: one integrating the controlling device and the other excluding it. The study underscores the advantages of vehicle type A, which, due to its higher number of wheelers and fewer cranes compared to vehicle type B, demonstrates greater efficacy in establishing a robust queuing system.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 94 (2) , e20200247
Influence of different Eucalyptus hybrids on soil macrofauna
The present work aimed to evaluate the influence of different eucalyptus hybrids on the edaphic macrofauna community. It is hypothesized that the density and diversity of edaphic fauna are influenced by the quantity and quality of the litter deposited by the different hybrids on the soil surface. The study area is in the city of Vitória da Conquista (BA) and consists of seven eucalyptus hybrids, one from sexual reproduction (seminal) and six from asexual (clonal) reproduction. Sampling of the soil macrofauna was performed by the Tropical Soil Biology and Fertility method. All visible invertebrates were collected and identified at the level of large taxonomic groups. The relative density, group richness, and diversity index were calculated. Hybrids did not influence the total density and richness of the soil macrofauna. However, it was possible to observe changes in litter accumulation and composition, and as a result in the diversity indexes and in the presence or absence of macrofauna groups. Among the studied hybrids, those from Eucalyptus urophylla (seminal, 1335 and 1249) promote greater macrofauna diversity and favor the occurrence of detritivores organisms, suggesting the occurrence of better quality and more palatable litter for the edaphic fauna.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 94 (2) , e20200247
Open AccessInfluence of different Eucalyptus hybrids on soil macrofauna
The present work aimed to evaluate the influence of different eucalyptus hybrids on the edaphic macrofauna community. It is hypothesized that the density and diversity of edaphic fauna are influenced by the quantity and quality of the litter deposited by the different hybrids on the soil surface. The study area is in the city of Vitória da Conquista (BA) and consists of seven eucalyptus hybrids, one from sexual reproduction (seminal) and six from asexual (clonal) reproduction. Sampling of the soil macrofauna was performed by the Tropical Soil Biology and Fertility method. All visible invertebrates were collected and identified at the level of large taxonomic groups. The relative density, group richness, and diversity index were calculated. Hybrids did not influence the total density and richness of the soil macrofauna. However, it was possible to observe changes in litter accumulation and composition, and as a result in the diversity indexes and in the presence or absence of macrofauna groups. Among the studied hybrids, those from Eucalyptus urophylla (seminal, 1335 and 1249) promote greater macrofauna diversity and favor the occurrence of detritivores organisms, suggesting the occurrence of better quality and more palatable litter for the edaphic fauna.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Revista Árvore
- Vol. 46
SILVICULTURAL TASKS SCHEDULING OPTIMIZATION: A CASE STUDY OF FUNCTIONS AND METHODS
Scheduling problems are tasks of the operational routine in companies, which demand an optimal solution to support the decision. However, these problems have not been frequently investigated in forestry science. Therefore, it was proposed to describe a mathematical formulation for silviculture optimization under scheduling restriction of the workforce /sequencing of tasks (SSRCMM). Seeking the most suitable method to solve this combinatorial problem, two strategies were compared: i) Integer Linear Programming (ILP) and ii) simulated annealing (SA). The main criteria to assess strategies’ performance were to provide feasible solutions at an acceptable processing time and final project cost. The instance approached is a real problem outlined in 32 stands and five silvicultural tasks scheduled within a 40-day deadline. Three objective functions were also tested, defining case studies (S) to attend to the recurring managers’ decisions by minimizing: S1 – project cost, S2 – makespan, and S3 – workforce usage. The results reveal a robust model to support the forest planner in operational-level tasks. The ILP achieved the optimal solution only for the minimization of the project cost (S1) due to the delay in processing time of the other case studies. Thus, the SA stands out as an efficient method to solve the SSRCMM by providing satisfactory solutions in a reduced time. All the objective functions fitted properly with their proposed goals. The makespan and workforce usage functions increased by US$1,820.29 (S2) and US$2,146.39 (S3) from the S1, respectively, to finish the project earlier and reduce the oscillation of workforce usage over the days. Facing these findings, it is suggested that future researchers incorporate other challenges in decision-making, involving a multi-objective formulation or methods to reveal new insights for forest management and planning.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Revista Árvore
- Vol. 46
Open AccessSILVICULTURAL TASKS SCHEDULING OPTIMIZATION: A CASE STUDY OF FUNCTIONS AND METHODS
Scheduling problems are tasks of the operational routine in companies, which demand an optimal solution to support the decision. However, these problems have not been frequently investigated in forestry science. Therefore, it was proposed to describe a mathematical formulation for silviculture optimization under scheduling restriction of the workforce /sequencing of tasks (SSRCMM). Seeking the most suitable method to solve this combinatorial problem, two strategies were compared: i) Integer Linear Programming (ILP) and ii) simulated annealing (SA). The main criteria to assess strategies’ performance were to provide feasible solutions at an acceptable processing time and final project cost. The instance approached is a real problem outlined in 32 stands and five silvicultural tasks scheduled within a 40-day deadline. Three objective functions were also tested, defining case studies (S) to attend to the recurring managers’ decisions by minimizing: S1 – project cost, S2 – makespan, and S3 – workforce usage. The results reveal a robust model to support the forest planner in operational-level tasks. The ILP achieved the optimal solution only for the minimization of the project cost (S1) due to the delay in processing time of the other case studies. Thus, the SA stands out as an efficient method to solve the SSRCMM by providing satisfactory solutions in a reduced time. All the objective functions fitted properly with their proposed goals. The makespan and workforce usage functions increased by US$1,820.29 (S2) and US$2,146.39 (S3) from the S1, respectively, to finish the project earlier and reduce the oscillation of workforce usage over the days. Facing these findings, it is suggested that future researchers incorporate other challenges in decision-making, involving a multi-objective formulation or methods to reveal new insights for forest management and planning.
- Open Access
- 16 July 2019
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 49 (3) , 571-578
BIOMASS AND NUTRIENTS REMOVAL IN PURE AND MIXED POPULATIONS OF Pinus sp. IN SOUTHWEST BAHIA - BRAZIL
The magnitude of export of nutrients with forest harvest depends on the adopted waste management and, above all, on the distribution of biomass and nutrients in the trees, which is conditioned by the genetic potential and the species composition of forest stand. The objective of this study was to quantify the biomass and nutrients of the trees and evaluate the effect of the management of harvest residues on the removal of nutrients from pure and mixed plantations of Pinus sp.. The study areas are located in the Southwest region of Bahia State, Brazil. Twenty trees per species were selected and felled under both planting conditions. The biomass quantification was performed by the destructive method. Samples of the tree components were analyzed for N, P, K, Ca and Mg contents. The total biomass was 75 Mg ha-1 for pure planting, and 81 Mg ha-1 for mixed planting, with wood and bark as the most representative compartments. Removal of the wood with bark led to too much nutrient removal, reaching a further 50% of the total contained in the biomass. Mixed planting has been shown more prone to export P, K and Mg. For both plantations, 64% of the N, P, K, Ca and Mg are in other components of the aerial part of the tree, and not in the wood. The elements that represent the highest risk for maintaining productivity are Ca and Mg.
- 16 July 2019
- Published by Universidade Federal do Parana in FLORESTA
- Vol. 49 (3) , 571-578
Open AccessBIOMASS AND NUTRIENTS REMOVAL IN PURE AND MIXED POPULATIONS OF Pinus sp. IN SOUTHWEST BAHIA - BRAZIL
The magnitude of export of nutrients with forest harvest depends on the adopted waste management and, above all, on the distribution of biomass and nutrients in the trees, which is conditioned by the genetic potential and the species composition of forest stand. The objective of this study was to quantify the biomass and nutrients of the trees and evaluate the effect of the management of harvest residues on the removal of nutrients from pure and mixed plantations of Pinus sp.. The study areas are located in the Southwest region of Bahia State, Brazil. Twenty trees per species were selected and felled under both planting conditions. The biomass quantification was performed by the destructive method. Samples of the tree components were analyzed for N, P, K, Ca and Mg contents. The total biomass was 75 Mg ha-1 for pure planting, and 81 Mg ha-1 for mixed planting, with wood and bark as the most representative compartments. Removal of the wood with bark led to too much nutrient removal, reaching a further 50% of the total contained in the biomass. Mixed planting has been shown more prone to export P, K and Mg. For both plantations, 64% of the N, P, K, Ca and Mg are in other components of the aerial part of the tree, and not in the wood. The elements that represent the highest risk for maintaining productivity are Ca and Mg.
- Open Access
- 28 March 2018
- Published by Revista Brasileira de Ciencias Agrarias in Revista Brasileira de Ciências Agrárias - Brazilian Journal of Agricultural Sciences
- Vol. 13 (1) , 1-6
Arbuscular mycorrhizal fungi in soils of arboreal Caatinga submitted to forest management
Fungos micorrízicos arbusculares em solo sob Caatinga arbórea submetida a manejo florestal - DOI:10.5039/agraria.v13i1a5497
- 28 March 2018
- Published by Revista Brasileira de Ciencias Agrarias in Revista Brasileira de Ciências Agrárias - Brazilian Journal of Agricultural Sciences
- Vol. 13 (1) , 1-6
Open AccessArbuscular mycorrhizal fungi in soils of arboreal Caatinga submitted to forest management
Fungos micorrízicos arbusculares em solo sob Caatinga arbórea submetida a manejo florestal - DOI:10.5039/agraria.v13i1a5497