De-Quan Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
De-Quan Zhou has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Chen-Xi Feng
School of Civil Engineering, Nanyang Institute of Technology, Nanyang 473004, China
3 shared publications - Qin Zhu
School of Civil Architectural Engineering, Shaoyang University, Shaoyang, People’s Republic of China
2 shared publications - Chuang-Ye Wang
School of Civil engineering, Changsha University of Science and Technology, Changsha, China
1 shared publication - Chuangye Wang
College of Civil Engineering, Changsha University of Science and Technology, Changsha 410114, China
1 shared publication Cong Yan
Changsha University of Science and Technology
1 shared publication- Fei Pang
School of Civil Engineering, Nanyang Institute of Technology, Nanyang, China
1 shared publication
Latest Publications
- 31 October 2025
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 43 (9) , 1-24
Experimental and Theoretical Study on the Behavior of Passive Batter Piles under Surcharge-Induced Lateral Soil Movement
- 31 October 2025
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 43 (9) , 1-24
Experimental and Theoretical Study on the Behavior of Passive Batter Piles under Surcharge-Induced Lateral Soil Movement
- Open Access
- 15 September 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (18) , 10333
Experimental Investigation on Performances of Battered Piles Resisting Embankment-Induced Lateral Soil Movement
The performance of passive battered piles resisting the embankment-induced lateral soil movements may differ from that of the active battered pile and axially loaded existing vertical piles adjacent to embankment constructions. This study was part of a preliminary feasibility investigation for a reinforcement plan of an actual embankment project, aiming to experimentally investigate the performance of passive battered piles under embankment-induced lateral soil movement. To this end, a sequence of reduced-scale model tests of battered piles near the surcharges was first designed in sandy soil with a similarity ratio of 1:30. The effects of pile inclinations (β = −20°, −10°, 0°, +10°, and +20°), surcharge magnitudes, and constraint conditions at the pile tip (free-tip and fixed-tip) on the responses of passive battered piles were explored. Finally, the response characteristics of battered piles resisting the embankment-induced lateral soil movement were analyzed to clarify the working mechanism of these battered piles.
- 15 September 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (18) , 10333
Open AccessExperimental Investigation on Performances of Battered Piles Resisting Embankment-Induced Lateral Soil Movement
The performance of passive battered piles resisting the embankment-induced lateral soil movements may differ from that of the active battered pile and axially loaded existing vertical piles adjacent to embankment constructions. This study was part of a preliminary feasibility investigation for a reinforcement plan of an actual embankment project, aiming to experimentally investigate the performance of passive battered piles under embankment-induced lateral soil movement. To this end, a sequence of reduced-scale model tests of battered piles near the surcharges was first designed in sandy soil with a similarity ratio of 1:30. The effects of pile inclinations (β = −20°, −10°, 0°, +10°, and +20°), surcharge magnitudes, and constraint conditions at the pile tip (free-tip and fixed-tip) on the responses of passive battered piles were explored. Finally, the response characteristics of battered piles resisting the embankment-induced lateral soil movement were analyzed to clarify the working mechanism of these battered piles.
- Open Access
- 25 April 2023
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-10
Mechanical Property of Lateral Piles for Pile Composite Foundation Loaded by Model Test
Under vertical load, the composite foundation may be damaged due to insufficient lateral restraint capacity. If the lateral restraint pile is added to the edge of the composite foundation, the lateral stability can be effectively enhanced. This new reinforcement scheme is called a combined composite foundation. For the combined composite foundation, the lateral restraint piles will bear a certain force when the composite foundation is loaded, and the force may cause the piles horizontal displacement, instability, or even failure. After preload on the composite foundation, the mechanical behavior of lateral restraint piles will be more sophisticated. To study the mechanical behavior of lateral restraint piles under such condition, a laboratory model test was conducted. The results are suggested as follows: Axial force distribution curves tend to be S shape with two peak values at the upper and lower parts, respectively. The negative axial force is distributed at the upper part, and the positive axial force is distributed at the lower part. The bending moment and lateral soil pressure distribution of piles appear with the regularity of increase-decrease along the depth. Such a phenomenon is associated with the expansion of a potential slip surface. In accordance with the relative location of the potential slide surface and the piles, the lateral restraint piles can fall into three sections. Different sections get different stresses. The reinforcement scopes have an impact on the stress of different lateral restraint piles. With the increase of the reinforcement scope, the axial force, soil pressure, and bending moment show the regularity of increase. The values of axial force, the lateral soil pressure, and the bending moment increase with load growth and become stable when the load is larger than 60kN. This is associated with the piles in the composite foundation, which verifies the reinforcement effect to prevent the soil slide and the foundation deformation.
- 25 April 2023
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-10
Open AccessMechanical Property of Lateral Piles for Pile Composite Foundation Loaded by Model Test
Under vertical load, the composite foundation may be damaged due to insufficient lateral restraint capacity. If the lateral restraint pile is added to the edge of the composite foundation, the lateral stability can be effectively enhanced. This new reinforcement scheme is called a combined composite foundation. For the combined composite foundation, the lateral restraint piles will bear a certain force when the composite foundation is loaded, and the force may cause the piles horizontal displacement, instability, or even failure. After preload on the composite foundation, the mechanical behavior of lateral restraint piles will be more sophisticated. To study the mechanical behavior of lateral restraint piles under such condition, a laboratory model test was conducted. The results are suggested as follows: Axial force distribution curves tend to be S shape with two peak values at the upper and lower parts, respectively. The negative axial force is distributed at the upper part, and the positive axial force is distributed at the lower part. The bending moment and lateral soil pressure distribution of piles appear with the regularity of increase-decrease along the depth. Such a phenomenon is associated with the expansion of a potential slip surface. In accordance with the relative location of the potential slide surface and the piles, the lateral restraint piles can fall into three sections. Different sections get different stresses. The reinforcement scopes have an impact on the stress of different lateral restraint piles. With the increase of the reinforcement scope, the axial force, soil pressure, and bending moment show the regularity of increase. The values of axial force, the lateral soil pressure, and the bending moment increase with load growth and become stable when the load is larger than 60kN. This is associated with the piles in the composite foundation, which verifies the reinforcement effect to prevent the soil slide and the foundation deformation.
- 1 August 2021
- Published by Springer Nature in Journal of Central South University
- Vol. 28 (8) , 2574-2588
Influence of water-rich tunnel by shield tunneling on existing bridge pile foundation in layered soils
- 1 August 2021
- Published by Springer Nature in Journal of Central South University
- Vol. 28 (8) , 2574-2588
Influence of water-rich tunnel by shield tunneling on existing bridge pile foundation in layered soils
- Open Access
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Reinforcement Effect of Inclined Prestressed Concrete Pipe Piles on an Inclined Soft Foundation
The embankment slope is vulnerable to slip and collapse, when prestressed concrete pipe (PCP) piles are used to reinforce the inclined soft foundation to bear the load of the embankment. Accordingly, this study puts forward new programs for strengthening embankment foundation with inclined, rather than vertical, PCP piles. Based on an actual engineering accident with embankment slope collapse, this study establishes a finite element model, accompanied by analysis of engineering characteristics and reinforcement effects of the foundation. The main conclusions are drawn as follows: (1) when a pile‐supported foundation is used to strengthen the inclined soft foundation, PCP piles in the lower part of the embankment are subjected to bending moments, with their maximum value appearing in the upper part of the PCP pile at the embankment slope foot. During the embankment filling, the maximum pile bending moment may reach the ultimate bending load, resulting in bending failure accompanied with large lateral displacement and even slope collapse. The maximum horizontal displacement of the foundation is located at the foot of the embankment slope. (2) Reinforcement using inclined PCP piles contributes to smaller maximum pile body bending moments than that using vertical PCP piles and loading berms, and such contribution is enhanced when the inclination angle of PCP piles in the lower part of the slope gets larger. Therefore, inclined PCP piles with high angles are optimum in improving the overall stability of the foundation. (3) Compared with vertical PCP piles, inclined PCP piles contribute to smaller horizontal displacement and vertical settlement in foundation reinforcement, which means better reinforcement effects. Moreover, as the inclination angle of PCP piles increases, the maximum displacement decreases rapidly, associated with greatly enhanced lateral stability.
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Open AccessReinforcement Effect of Inclined Prestressed Concrete Pipe Piles on an Inclined Soft Foundation
The embankment slope is vulnerable to slip and collapse, when prestressed concrete pipe (PCP) piles are used to reinforce the inclined soft foundation to bear the load of the embankment. Accordingly, this study puts forward new programs for strengthening embankment foundation with inclined, rather than vertical, PCP piles. Based on an actual engineering accident with embankment slope collapse, this study establishes a finite element model, accompanied by analysis of engineering characteristics and reinforcement effects of the foundation. The main conclusions are drawn as follows: (1) when a pile‐supported foundation is used to strengthen the inclined soft foundation, PCP piles in the lower part of the embankment are subjected to bending moments, with their maximum value appearing in the upper part of the PCP pile at the embankment slope foot. During the embankment filling, the maximum pile bending moment may reach the ultimate bending load, resulting in bending failure accompanied with large lateral displacement and even slope collapse. The maximum horizontal displacement of the foundation is located at the foot of the embankment slope. (2) Reinforcement using inclined PCP piles contributes to smaller maximum pile body bending moments than that using vertical PCP piles and loading berms, and such contribution is enhanced when the inclination angle of PCP piles in the lower part of the slope gets larger. Therefore, inclined PCP piles with high angles are optimum in improving the overall stability of the foundation. (3) Compared with vertical PCP piles, inclined PCP piles contribute to smaller horizontal displacement and vertical settlement in foundation reinforcement, which means better reinforcement effects. Moreover, as the inclination angle of PCP piles increases, the maximum displacement decreases rapidly, associated with greatly enhanced lateral stability.
- Open Access
- 1 September 2019
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 23 (9) , 3907-3923
Engineering Characteristics and Reinforcement Program of Inclined Pre-stressed Concrete Pipe Piles
- 1 September 2019
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 23 (9) , 3907-3923
Open AccessEngineering Characteristics and Reinforcement Program of Inclined Pre-stressed Concrete Pipe Piles
- Open Access
- 25 May 2018
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 22 (10) , 3818-3826
Experimental Study of Mechanical Behavior of Passive Loaded Piles Adjacent to Piled Foundation
- 25 May 2018
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 22 (10) , 3818-3826
Open AccessExperimental Study of Mechanical Behavior of Passive Loaded Piles Adjacent to Piled Foundation
- 1 December 2008
- Published by Springer Nature in Journal of Central South University of Technology
- Vol. 15 (2) , 58-62
Geological behavior of wet outflow deposition fly ash
- 1 December 2008
- Published by Springer Nature in Journal of Central South University of Technology
- Vol. 15 (2) , 58-62
Geological behavior of wet outflow deposition fly ash