Alberto Ferraro

In recent years, plastic litter in marine ecosystems has emerged as a global concern. Consequently, efforts to control, mitigate, and remove micro- and macroplastics from marine systems have intensified. In order to thoroughly analyze this topic, the present work provides a comprehensive overview of various strategies aimed at reducing plastic waste pollution spread in marine areas. Based on this, worldwide regulations limiting single-use plastic (SUP) products and microplastics in health care products were discussed. Further attention was also paid to bioplastic production as a potential alternative to non-degradable ones, with particular attention to their different degradability rates in various environmental compartments. Finally, strategies for the reduction in plastic pollution were specifically analyzed through a review of plastic litter collection/removal systems from beaches and the marine environment as well as different waterways. According to the above-mentioned aspects, this work highlights the significance of marine plastic litter pollution and provides support for the identification and selection of effective strategies for the mitigation of the impact of such litter on the environment.

This work provides a comprehensive study of a density separation treatment through sucrose solution for the removal of microplastics (MPs) from marine sediments. The theoretical determination of flotation velocities for 1.0 mm diameter spherical MPs with a density of 1.3 g/cm³ at various solution temperatures and sucrose contents was performed. An optimal velocity of 1.03 m/h was observed with a 70% sucrose solution at 50 °C. The validation of theoretical velocities was carried out through experimental tests at optimal operating conditions for polypropylene (PP), high-density polyethylene (HDPE), polylactic acid (PLA), and polyvinyl chloride (PVC) as target MPs. The results showed an experimental floating velocity slightly lower than the theoretical predictions for PP, HDPE, and PLA. PVC, instead, characterized by a higher density than the separation solution, showed a settling velocity 42% lower than the theoretical one. Further tests were performed to assess the solid-to-liquid (S/L) ratio effect on MPs’ separation efficiency. The results showed an optimal S/L of 75 kg/m³ with 80% PVC removal and total PP, HDPE, and PLA removal. Finally, the design and cost optimization of a longitudinal settling tank were proposed for the pilot/real-scale treatment. The observed outcomes provided in-depth details useful for the development of an environmentally sustainable treatment for the preservation of marine areas.

This work investigates a statistical approach analysing data from monitoring activities on marine-coastal areas for environmental quality determination and surveillance. Analyses were performed on a database of the Environmental Protection and Prevention Agency of the Puglia Region. As, Cr, Ni, and Pb concentration values in marine sediments and biota from 2013 to 2015 and 2017 were processed to investigate different contaminant characteristics. Hierarchical cluster analysis identified three contaminant distribution classes with (1) highest Cr, Ni, and Pb concentrations, (2) highest As concentration, and (3) lowest contaminants concentration. The Kruskal-Wallis and Friedman tests showed that contaminant distributions were statistically different when considering the monitoring years and classes. However, statistical similarities resulted during the 2013–2017 and 2014–2015 periods. Spearman’s coefficients displayed positive correlations among the pollutants in each matrix and mainly negative correlations for matrices comparison. This methodology aims to provide a practical support for monitoring to identify potential environmental deterioration over time and correlations with specific contamination sources.