Akshit Saradagi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Akshit Saradagi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Arun D. Mahindrakar
Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India
3 shared publications - George Nikolakopoulos
Luleå University of Technology
2 shared publications - Vijay Muralidharan
Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India
2 shared publications - Avijit Banerjee
Robotics & AI Team, Department of Computer, Electrical and Space Engineering, Luleå University of Technology, Luleå, Sweden
1 shared publication - Björn Lindqvist
Department of Computer Science, Electrical and Space Engineering, Lule University of Technology, Lule, Sweden
1 shared publication George Nikolakopoulos
1 shared publication
Latest Publications
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Field Robotics
- Vol. 2, 465-484
Deployment of an Aerial Multiagent System for Automated Task Execution in Large-Scale Underground Mining Environments
In this article, we present a framework for deploying aerial multi-agent systems in large-scale subterranean environments with minimal supporting infrastructure. The objective is to optimally and reactively execute routine inspection tasks, selected by a mine operator on-the-fly. The assignment of currently available tasks to the agents is accomplished through an auction-based system, where the agents bid for available tasks, which are used by a central auctioneer to optimally assign the tasks. A mobile Wi-Fi mesh supports inter-agent communication and bi-directional communication between agents and the task allocator, while the task execution is performed completely infrastructure-free. Given a task to be accomplished, reliable and modular agent behavior is synthesized by generating behavior trees from a pool of agent capabilities, using a back-chaining approach. The auction system is reactive and supports the addition of new tasks on-the-go, at any point through a user-friendly operator interface. The framework has been validated in a real underground mining environment using three aerial agents, with several inspection locations spread in an environment of almost 200 meters as a proof-of-concept. The scalability, fault tolerance, and the influence of agent initializations on the multi-agent architecture have been tested through complementary Gazebo simulations in a cave environment. The proposed framework can be utilized in a subterranean environment for missions involving rapid inspection, gas detection, distributed sensing and mapping etc. The proposed framework and its field deployment contribute towards furthering reliable automation in large-scale subterranean environments to offload both routine and dangerous tasks from human operators to autonomous aerial robots.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Field Robotics
- Vol. 2, 465-484
Deployment of an Aerial Multiagent System for Automated Task Execution in Large-Scale Underground Mining Environments
In this article, we present a framework for deploying aerial multi-agent systems in large-scale subterranean environments with minimal supporting infrastructure. The objective is to optimally and reactively execute routine inspection tasks, selected by a mine operator on-the-fly. The assignment of currently available tasks to the agents is accomplished through an auction-based system, where the agents bid for available tasks, which are used by a central auctioneer to optimally assign the tasks. A mobile Wi-Fi mesh supports inter-agent communication and bi-directional communication between agents and the task allocator, while the task execution is performed completely infrastructure-free. Given a task to be accomplished, reliable and modular agent behavior is synthesized by generating behavior trees from a pool of agent capabilities, using a back-chaining approach. The auction system is reactive and supports the addition of new tasks on-the-go, at any point through a user-friendly operator interface. The framework has been validated in a real underground mining environment using three aerial agents, with several inspection locations spread in an environment of almost 200 meters as a proof-of-concept. The scalability, fault tolerance, and the influence of agent initializations on the multi-agent architecture have been tested through complementary Gazebo simulations in a cave environment. The proposed framework can be utilized in a subterranean environment for missions involving rapid inspection, gas detection, distributed sensing and mapping etc. The proposed framework and its field deployment contribute towards furthering reliable automation in large-scale subterranean environments to offload both routine and dangerous tasks from human operators to autonomous aerial robots.
- Open Access
- 17 February 2025
- Published by Elsevier in Control Engineering Practice
- Vol. 158
Switched control barrier functions-based safe docking control strategy for a planar floating platform
- 17 February 2025
- Published by Elsevier in Control Engineering Practice
- Vol. 158
Open AccessSwitched control barrier functions-based safe docking control strategy for a planar floating platform
- 11 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (12) , 11625-11632
Voxel Map to Occupancy Map Conversion Using Free Space Projection for Efficient Map Representation for Aerial and Ground Robots
This article introduces a novel method for converting 3D voxel maps, commonly utilized by robots for localization and navigation, into 2D occupancy maps for both unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs). The generated 2D maps can be used for more efficient global navigation for both UAVs and UGVs, in enabling algorithms developed for 2D maps to be useful in 3D applications, and allowing for faster transfer of maps between multiple agents in bandwidth-limited scenarios. The proposed method uses the free space representation in the voxel mapping solution to generate 2D occupancy maps. During the 3D to 2D map conversion, the method conducts safety checks and eliminates free spaces in the map with dimensions (in the height axis) lower than the robot's safety margins. This ensures that an aerial or ground robot can navigate safely, relying primarily on the 2D map generated by the method. Additionally, the method extracts the height of navigable free space and a local estimate of the slope of the floor from the 3D voxel map. The height data is utilized in converting paths generated using the 2D map into paths in 3D space for both UAVs and UGVs. The slope data identifies areas too steep for a ground robot to traverse, marking them as occupied, thus enabling a more accurate representation of the terrain for ground robots. The proposed method is compared to the existing state-of-the-art fixed projection method in two different environments, over static maps and with progressively expanding maps. The methods proposed in this article have been implemented in the widely-used robotics frameworks ROS and ROS2, and are open-sourced. The code is available at: https://github.com/LTU-RAI/Map-Conversion-3D-Voxel-Map-to-2D-Occupancy-Map .
- 11 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (12) , 11625-11632
Voxel Map to Occupancy Map Conversion Using Free Space Projection for Efficient Map Representation for Aerial and Ground Robots
This article introduces a novel method for converting 3D voxel maps, commonly utilized by robots for localization and navigation, into 2D occupancy maps for both unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs). The generated 2D maps can be used for more efficient global navigation for both UAVs and UGVs, in enabling algorithms developed for 2D maps to be useful in 3D applications, and allowing for faster transfer of maps between multiple agents in bandwidth-limited scenarios. The proposed method uses the free space representation in the voxel mapping solution to generate 2D occupancy maps. During the 3D to 2D map conversion, the method conducts safety checks and eliminates free spaces in the map with dimensions (in the height axis) lower than the robot's safety margins. This ensures that an aerial or ground robot can navigate safely, relying primarily on the 2D map generated by the method. Additionally, the method extracts the height of navigable free space and a local estimate of the slope of the floor from the 3D voxel map. The height data is utilized in converting paths generated using the 2D map into paths in 3D space for both UAVs and UGVs. The slope data identifies areas too steep for a ground robot to traverse, marking them as occupied, thus enabling a more accurate representation of the terrain for ground robots. The proposed method is compared to the existing state-of-the-art fixed projection method in two different environments, over static maps and with progressively expanding maps. The methods proposed in this article have been implemented in the widely-used robotics frameworks ROS and ROS2, and are open-sourced. The code is available at: https://github.com/LTU-RAI/Map-Conversion-3D-Voxel-Map-to-2D-Occupancy-Map .
- 15 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 69 (10) , 7051-7058
Event-Triggered Control for Nonlinear Systems With Center Manifolds
In this work, we consider the problem of event-triggered implementation of control laws designed for the local stabilization of nonlinear systems with center manifolds. We propose event-triggering conditions which are derived from a local input-to-state stability characterization of such systems. The triggering conditions ensure local ultimate boundedness of the trajectories and the existence of a uniform positive lower bound for the inter-event times. The ultimate bound can be made arbitrarily small, by allowing for smaller inter-event times. Under certain assumptions on the controller structure, local asymptotic stability of the origin is also guaranteed. Two sets of triggering conditions are proposed, one for the case where the exact center manifold is known and the other for the case where only an approximation of the center manifold is computable. Two illustrative examples representative of the two scenarios are presented and the applicability of the proposed methods is demonstrated. The second example concerns the event-triggered implementation of a position stabilizing controller for the open-loop unstable Mobile Inverted Pendulum (MIP) robot.
- 15 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 69 (10) , 7051-7058
Event-Triggered Control for Nonlinear Systems With Center Manifolds
In this work, we consider the problem of event-triggered implementation of control laws designed for the local stabilization of nonlinear systems with center manifolds. We propose event-triggering conditions which are derived from a local input-to-state stability characterization of such systems. The triggering conditions ensure local ultimate boundedness of the trajectories and the existence of a uniform positive lower bound for the inter-event times. The ultimate bound can be made arbitrarily small, by allowing for smaller inter-event times. Under certain assumptions on the controller structure, local asymptotic stability of the origin is also guaranteed. Two sets of triggering conditions are proposed, one for the case where the exact center manifold is known and the other for the case where only an approximation of the center manifold is computable. Two illustrative examples representative of the two scenarios are presented and the applicability of the proposed methods is demonstrated. The second example concerns the event-triggered implementation of a position stabilizing controller for the open-loop unstable Mobile Inverted Pendulum (MIP) robot.
- 2 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1
Modelling, design and control of non-isolated single-input multi-output Zeta-Buck-Boost converter
In this paper, we focus on the analytical modelling of non-isolated single-input multiple-output (SIMO) DC-DC converters governed by linear differential algebraic equations (DAEs). The modelling challenge in non-isolated SIMO converters arises due to the switching among multiple DAEs governing the circuit. Averaged models of such converters, described by an ordinary differential equations, are derived using the notion of quasi Weierstrass transformation. Using this technique we derive the averaged model for a non-isolated Zeta-Buck-Boost (ZBB) converter. It is observed that the dynamics of the state variable corresponding to the algebraic constraint is uncontrollable and eliminating this state leads to a fourth-order completely-controllable averaged model. This model is used to design a linear state-feedback controller for line regulation. In the case of bipolar SIMO converters, ZBB being an example, regulation of the two outputs can be achieved using any one of the two output integral states. Although the state-feedback controller successfully rejects the disturbance asymptotically, it is found that the deviations from the set point in the transient phase can be large. To see if smaller deviations can be achieved by appending the linear controller with a nonlinear term, we explore a nonlinear controller based on Lyapunov redesign technique. Smaller deviations with complete disturbance rejection is possible if the disturbance is matched. When it is unmatched, small deviations are achieved at the expense of steady-state errors, whose estimate is explicitly found. The proposed model and control scheme is verified through a laboratory built hardware prototype.
- 2 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1
Modelling, design and control of non-isolated single-input multi-output Zeta-Buck-Boost converter
In this paper, we focus on the analytical modelling of non-isolated single-input multiple-output (SIMO) DC-DC converters governed by linear differential algebraic equations (DAEs). The modelling challenge in non-isolated SIMO converters arises due to the switching among multiple DAEs governing the circuit. Averaged models of such converters, described by an ordinary differential equations, are derived using the notion of quasi Weierstrass transformation. Using this technique we derive the averaged model for a non-isolated Zeta-Buck-Boost (ZBB) converter. It is observed that the dynamics of the state variable corresponding to the algebraic constraint is uncontrollable and eliminating this state leads to a fourth-order completely-controllable averaged model. This model is used to design a linear state-feedback controller for line regulation. In the case of bipolar SIMO converters, ZBB being an example, regulation of the two outputs can be achieved using any one of the two output integral states. Although the state-feedback controller successfully rejects the disturbance asymptotically, it is found that the deviations from the set point in the transient phase can be large. To see if smaller deviations can be achieved by appending the linear controller with a nonlinear term, we explore a nonlinear controller based on Lyapunov redesign technique. Smaller deviations with complete disturbance rejection is possible if the disturbance is matched. When it is unmatched, small deviations are achieved at the expense of steady-state errors, whose estimate is explicitly found. The proposed model and control scheme is verified through a laboratory built hardware prototype.
- 9 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 64 (8) , 3226-3238
Control of a Driftless Bilinear Vector Field on $n$-Sphere
In this paper we consider a multi-input driftless bilinear system evolving on the $n$ -dimensional sphere $S^n$ . We first provide examples drawn from rigid body mechanics that provide the motivation for the control of bilinear systems on $S^n$ . For the general framework, we establish the global controllability on $S^n$ and propose two linear control laws on $S^n$ that achieve asymptotic stabilization of an equilibrium point with an almost global domain-of-attraction. Further, the asymptotically stable closed-loop system trajectories are shown to be arcs on the geodesics of $S^n$ for a particular choice of the equilibrium point. Next, we propose two linear time-varying control laws to achieve trajectory tracking on $S^n$ and show the asymptotic stability of the tracking error. A distributed control is designed for the consensus of multi-agent bilinear systems on $S^n$ with an undirected tree as the communication graph. The consensus manifold is shown to have an almost global domain of attraction.- 9 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 64 (8) , 3226-3238
Control of a Driftless Bilinear Vector Field on $n$-Sphere
In this paper we consider a multi-input driftless bilinear system evolving on the $n$ -dimensional sphere $S^n$ . We first provide examples drawn from rigid body mechanics that provide the motivation for the control of bilinear systems on $S^n$ . For the general framework, we establish the global controllability on $S^n$ and propose two linear control laws on $S^n$ that achieve asymptotic stabilization of an equilibrium point with an almost global domain-of-attraction. Further, the asymptotically stable closed-loop system trajectories are shown to be arcs on the geodesics of $S^n$ for a particular choice of the equilibrium point. Next, we propose two linear time-varying control laws to achieve trajectory tracking on $S^n$ and show the asymptotic stability of the tracking error. A distributed control is designed for the consensus of multi-agent bilinear systems on $S^n$ with an undirected tree as the communication graph. The consensus manifold is shown to have an almost global domain of attraction.