Riccardo Luchetti
Research Subjects
Riccardo Luchetti has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Atzei
Pro-Mano, Hand Surgery and Rehabilitation, Treviso, Italy
7 shared publications Andrea Atzei
Pro-Mano, Hand Surgery and Rehabilitation, Italy
4 shared publications- Gregory Ian Bain
Flinders University and Flinders Medical Centre
4 shared publications - Lucian Lior Marcovici
Hand & Microsurgery Unit, Jewish Hospital of Rome, 00186 Rome, Italy
4 shared publications Lucian Lior Marcovici
Hand and Microsurgery Unit, Jewish Hospital of Rome, Italy
3 shared publicationsRoberto Cozzolino
Campano Hand & Wrist Surgery and Rehabilitation Center, Scafati, Italy
3 shared publications
Latest Publications
- 12 August 2026
- Published by Wolters Kluwer Health in Techniques in Hand & Upper Extremity Surgery
- Vol. 30 (4)
Capsuloplasty of the Dorsal Carpometacarpal Ligament Complex by Arthroscopy in Carpometacarpal Instability Arthroscopic Assisted
Background: Carpometacarpal (CMC) joint instability can arise from multiple factors, including rheumatoid arthritis, congenital abnormalities, connective tissue disorders, and acute or cumulative trauma. Early detection is crucial, as ligamentous laxity leads to joint incongruence, which, if left untreated, may progress to osteoarthritis(45) First-line treatment consists of immobilization with a splint combined with physical therapy. However, when conservative management fails, surgical stabilization of the CMC-1 joint becomes necessary. Traditional open techniques typically require bone tunnels and tendon harvesting. Technique: We present a novel arthroscopic technique that is less invasive and reinforces the dorsal capsule and dorsal ligaments complex. This approach, inspired by the Birman open procedure, is based on the concept that the dorsal ligament complex is the primary stabilizer of the CMC-1 joint. Results: Seven cases were followed for an average of 24 months. The mean visual analog scale (VAS) pain score was 0. The Kapandji score was 10. Grip strength reached 95% and pinch strength 92.5% of the contralateral hand. One complication was observed: transient irritation of the dorsal radial nerve. Conclusion: Arthroscopy is a viable option for capsuloplasty of the dorsal carpometacarpal ligament of the CMC-1 joint. It offers a minimally invasive alternative with fewer risks and less tissue damage while providing improved visualization of the joint, bone, and soft tissues and avoiding the need for complex joint reconstructions.
- 12 August 2026
- Published by Wolters Kluwer Health in Techniques in Hand & Upper Extremity Surgery
- Vol. 30 (4)
Capsuloplasty of the Dorsal Carpometacarpal Ligament Complex by Arthroscopy in Carpometacarpal Instability Arthroscopic Assisted
Background: Carpometacarpal (CMC) joint instability can arise from multiple factors, including rheumatoid arthritis, congenital abnormalities, connective tissue disorders, and acute or cumulative trauma. Early detection is crucial, as ligamentous laxity leads to joint incongruence, which, if left untreated, may progress to osteoarthritis(45) First-line treatment consists of immobilization with a splint combined with physical therapy. However, when conservative management fails, surgical stabilization of the CMC-1 joint becomes necessary. Traditional open techniques typically require bone tunnels and tendon harvesting. Technique: We present a novel arthroscopic technique that is less invasive and reinforces the dorsal capsule and dorsal ligaments complex. This approach, inspired by the Birman open procedure, is based on the concept that the dorsal ligament complex is the primary stabilizer of the CMC-1 joint. Results: Seven cases were followed for an average of 24 months. The mean visual analog scale (VAS) pain score was 0. The Kapandji score was 10. Grip strength reached 95% and pinch strength 92.5% of the contralateral hand. One complication was observed: transient irritation of the dorsal radial nerve. Conclusion: Arthroscopy is a viable option for capsuloplasty of the dorsal carpometacarpal ligament of the CMC-1 joint. It offers a minimally invasive alternative with fewer risks and less tissue damage while providing improved visualization of the joint, bone, and soft tissues and avoiding the need for complex joint reconstructions.
- 10 August 2026
- Published by Elsevier in Journal of Hand and Microsurgery
- Vol. 18 (6)
The inside-out progressive arthroscopic wrist arthrolysis for post-traumatic stiffness of the radiocarpal and midcarpal joints
- 10 August 2026
- Published by Elsevier in Journal of Hand and Microsurgery
- Vol. 18 (6)
The inside-out progressive arthroscopic wrist arthrolysis for post-traumatic stiffness of the radiocarpal and midcarpal joints
- 21 May 2026
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
Scaphoidectomy and Midcarpal Tenodesis is a Valid Alternative to Midcarpal Arthrodesis and Proximal Row Carpectomy for SLAC and SNAC Stage II
The aim of this study is to report the early and midterm results of a new technique in which the scaphoidectomy is associated with midcarpal tenodesis (MCT), used to stabilize the luno-triquetral carpal bones, preventing carpal collapse in scapholunate advanced collapse (SLAC) stage II and scaphoid nonunion advanced collapse (SNAC) stage II. A total of 27 patients with a mean age of 35 years were operated on with this technique after diagnostic arthroscopy. Patients with normal cartilage of the luno-capitate (LC) and radio-lunate (RL) joints underwent scaphoidectomy and MCT. Preoperatively and postoperatively, all patients were evaluated by radiological and clinical examination according to the Mayo Wrist Score (MWS). Disabilities of the Arm, Shoulder and Hand (DASH) and Patient-Rated Wrist and Hand Evaluation (PRWHE) questionnaires were also used. Only 3 of 27 cases failed and were treated by proximal row carpectomy (PRC) and MCT. Ten cases out of 27 patients had preoperative and postoperative complete data suitable for statistical analysis. At a follow-up of 2 years, the mean pain at stress and at rest decreased significantly. Mean MWS increased, and it was statistically significant (p = 0.03). DASH and PRWHE scores decreased, and both reached a statistical significance of 0.002 and 0.014, respectively. Radiographic imaging showed a radial translocation of the capitate in four cases, ulnar translocation of the luno-triquetral bones in two cases, dorsal intercalated segmental instability (DISI) deformity in eight cases, and midcarpal arthritis in nine cases. At a mean follow-up of 7 years, all the patients were still satisfied without worsening of the clinical parameters. Radiographic imaging showed a reduction of carpal height in one case, progression of the ulnar translocation and DISI deformity in two cases, and radiographic midcarpal arthritis in all cases, but no one complained of discomfort at the wrist motion and during work activity. The technique demonstrated to have a place between the PRC and the MCA, and it should be used when the RL and LC joints are still normal without breaking the bridge with these two previous surgical possibilities.
- 21 May 2026
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
Scaphoidectomy and Midcarpal Tenodesis is a Valid Alternative to Midcarpal Arthrodesis and Proximal Row Carpectomy for SLAC and SNAC Stage II
The aim of this study is to report the early and midterm results of a new technique in which the scaphoidectomy is associated with midcarpal tenodesis (MCT), used to stabilize the luno-triquetral carpal bones, preventing carpal collapse in scapholunate advanced collapse (SLAC) stage II and scaphoid nonunion advanced collapse (SNAC) stage II. A total of 27 patients with a mean age of 35 years were operated on with this technique after diagnostic arthroscopy. Patients with normal cartilage of the luno-capitate (LC) and radio-lunate (RL) joints underwent scaphoidectomy and MCT. Preoperatively and postoperatively, all patients were evaluated by radiological and clinical examination according to the Mayo Wrist Score (MWS). Disabilities of the Arm, Shoulder and Hand (DASH) and Patient-Rated Wrist and Hand Evaluation (PRWHE) questionnaires were also used. Only 3 of 27 cases failed and were treated by proximal row carpectomy (PRC) and MCT. Ten cases out of 27 patients had preoperative and postoperative complete data suitable for statistical analysis. At a follow-up of 2 years, the mean pain at stress and at rest decreased significantly. Mean MWS increased, and it was statistically significant (p = 0.03). DASH and PRWHE scores decreased, and both reached a statistical significance of 0.002 and 0.014, respectively. Radiographic imaging showed a radial translocation of the capitate in four cases, ulnar translocation of the luno-triquetral bones in two cases, dorsal intercalated segmental instability (DISI) deformity in eight cases, and midcarpal arthritis in nine cases. At a mean follow-up of 7 years, all the patients were still satisfied without worsening of the clinical parameters. Radiographic imaging showed a reduction of carpal height in one case, progression of the ulnar translocation and DISI deformity in two cases, and radiographic midcarpal arthritis in all cases, but no one complained of discomfort at the wrist motion and during work activity. The technique demonstrated to have a place between the PRC and the MCA, and it should be used when the RL and LC joints are still normal without breaking the bridge with these two previous surgical possibilities.
- 2 May 2026
- Published by Springer Nature
- p. 1287-1315
Arthroscopic Arthrolysis of the Wrist
- 5 March 2026
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
Arthroscopic Reverse Wafer Resection for Ulnocarpal Impingement
I read with great interest the recent paper by Ozcelik on “Arthroscopic reverse wafer resection for ulnocarpal impingement” J Wrist Surg September 2023 (doi: https://doi.org/10.1055/s-0043-1775819. ISSN 2163-3916). The reverse wafer resection is indeed an intelligent method for treating ulnocarpal conflict when the lunate (and triquetrum) is affected by osteochondropathic damage, either in isolation or in combination with damage to the ulnar head. This procedure creates additional space in the ulnocarpal joint, allowing for freer motion of the ulnar head and preventing conflict with the lunate and triquetrum. However, I would like to inform you that this technique is not new, as it was already described by Luchetti, Marcovici, and Cozzolino in 2022 in the chapter entitled “Arthroscopic Technique of Wafer Resection” in the ISAKOS book “Arthroscopy and Endoscopy of the Elbow, Wrist and Hand.”[1] Furthermore, I would like to point out that we currently have several arthroscopic options for treating ulnocarpal conflict, particularly in cases of ulnar plus variance: Thank you for considering this letter. I believe these clarifications may provide valuable context for understanding the evolution and technical nuances of arthroscopic wafer resection in ulnocarpal conflict. Received: 04 February 2026 Accepted: 10 February 2026 Article published online: 05 March 2026 © 2026. Thieme. All rights reserved. Thieme Medical Publishers, Inc. 333 Seventh Avenue, 18th Floor, New York, NY 10001, USA
- 5 March 2026
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
Arthroscopic Reverse Wafer Resection for Ulnocarpal Impingement
I read with great interest the recent paper by Ozcelik on “Arthroscopic reverse wafer resection for ulnocarpal impingement” J Wrist Surg September 2023 (doi: https://doi.org/10.1055/s-0043-1775819. ISSN 2163-3916). The reverse wafer resection is indeed an intelligent method for treating ulnocarpal conflict when the lunate (and triquetrum) is affected by osteochondropathic damage, either in isolation or in combination with damage to the ulnar head. This procedure creates additional space in the ulnocarpal joint, allowing for freer motion of the ulnar head and preventing conflict with the lunate and triquetrum. However, I would like to inform you that this technique is not new, as it was already described by Luchetti, Marcovici, and Cozzolino in 2022 in the chapter entitled “Arthroscopic Technique of Wafer Resection” in the ISAKOS book “Arthroscopy and Endoscopy of the Elbow, Wrist and Hand.”[1] Furthermore, I would like to point out that we currently have several arthroscopic options for treating ulnocarpal conflict, particularly in cases of ulnar plus variance: Thank you for considering this letter. I believe these clarifications may provide valuable context for understanding the evolution and technical nuances of arthroscopic wafer resection in ulnocarpal conflict. Received: 04 February 2026 Accepted: 10 February 2026 Article published online: 05 March 2026 © 2026. Thieme. All rights reserved. Thieme Medical Publishers, Inc. 333 Seventh Avenue, 18th Floor, New York, NY 10001, USA
- 23 June 2025
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
- Vol. 15 (04) , 318-325
Two-Column Intercarpal Arthrodesis Using Headless Compression Screws
Two-column midcarpal arthrodesis (2CMA) after scaphoidectomy is a well-established procedure for treating advanced wrist arthritis, particularly scapholunate advanced collapse and scaphoid nonunion advanced collapse grade III wrists. This study evaluates the clinical and radiographic outcomes of 2CMA using headless compression screws (HCS) over a 21-year period.From 2001 to 2022, 128 patients underwent 2CMA at two institutions. Preoperative arthroscopy was performed to confirm the integrity of the radiolunate joint. Outcomes were assessed using the Modified Mayo Wrist Score (MMWS), Disability of the Arm, Shoulder, and Hand (DASH) questionnaire, Patient-Reported Wrist Evaluation (PRWE), and radiographic analysis. Statistical analyses were conducted to compare pre- and postoperative outcomes.At a mean follow-up of 45 months, patients demonstrated significant improvements in pain (Visual Analogue Scale at rest: 2.0–0.6; under stress: 8.0–2.0; p < 0.001) and functional scores (MMWS: 27–69; DASH: 73–37; PRWE: 79–26; p < 0.001). Wrist range of motion improved from 61 to 81 degrees (p < 0.001), and grip strength increased from 19 to 28 kg (58–83% of the contralateral side, p < 0.05). Radiographic bone fusion was confirmed in 99% of cases, with a low complication rate of 4%, including two cases of radiocarpal arthropathy requiring total wrist fusion.The 2CMA technique with HCS achieved excellent pain relief, improved functionality, and high rates of bone consolidation. Compared with traditional four-corner arthrodesis, this approach avoids unnecessary joint fusion, preserving partial wrist mobility. The complications observed were minor and effectively managed.2CMA using HCS is a reliable technique for treating advanced wrist arthritis, providing durable pain relief, functional improvement, and high fusion rates. Further studies comparing this approach with other arthrodesis techniques are warranted.
- 23 June 2025
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
- Vol. 15 (04) , 318-325
Two-Column Intercarpal Arthrodesis Using Headless Compression Screws
Two-column midcarpal arthrodesis (2CMA) after scaphoidectomy is a well-established procedure for treating advanced wrist arthritis, particularly scapholunate advanced collapse and scaphoid nonunion advanced collapse grade III wrists. This study evaluates the clinical and radiographic outcomes of 2CMA using headless compression screws (HCS) over a 21-year period.From 2001 to 2022, 128 patients underwent 2CMA at two institutions. Preoperative arthroscopy was performed to confirm the integrity of the radiolunate joint. Outcomes were assessed using the Modified Mayo Wrist Score (MMWS), Disability of the Arm, Shoulder, and Hand (DASH) questionnaire, Patient-Reported Wrist Evaluation (PRWE), and radiographic analysis. Statistical analyses were conducted to compare pre- and postoperative outcomes.At a mean follow-up of 45 months, patients demonstrated significant improvements in pain (Visual Analogue Scale at rest: 2.0–0.6; under stress: 8.0–2.0; p < 0.001) and functional scores (MMWS: 27–69; DASH: 73–37; PRWE: 79–26; p < 0.001). Wrist range of motion improved from 61 to 81 degrees (p < 0.001), and grip strength increased from 19 to 28 kg (58–83% of the contralateral side, p < 0.05). Radiographic bone fusion was confirmed in 99% of cases, with a low complication rate of 4%, including two cases of radiocarpal arthropathy requiring total wrist fusion.The 2CMA technique with HCS achieved excellent pain relief, improved functionality, and high rates of bone consolidation. Compared with traditional four-corner arthrodesis, this approach avoids unnecessary joint fusion, preserving partial wrist mobility. The complications observed were minor and effectively managed.2CMA using HCS is a reliable technique for treating advanced wrist arthritis, providing durable pain relief, functional improvement, and high fusion rates. Further studies comparing this approach with other arthrodesis techniques are warranted.
- 6 May 2025
- Published by Springer Nature
- p. 323-350
Arthroscopic Arthrolysis of the Wrist
- 17 July 2024
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
- Vol. 14 (06) , 546-554
Single-Portal Arthroscopy Improves the Assessment of Radial-sided Disorders of the Wrist
This study aimed to describe the technique, indications, and advantages of the single-portal arthroscopic approach for the diagnosis and staging of chronic radial-sided disorders, including scapholunate interosseous ligament (SLIL) tear, scapholunate advanced collapse (SLAC) and scaphoid nonunion advanced collapse (SNAC) deformities. The single portal technique was used in 138 patients affected by suspected SLIL lesions, SLAC and SNAC wrist injuries with positive clinical symptoms and inconclusive imaging (X-ray and MRI). It was used to grade the nature of the SLIL lesion and the extension of the osteochondral damage in the SLAC and SNAC wrist deformity to guide appropriate treatment. Patients were divided into group 1 (SLIL: 45 cases), group 2a (SLAC: 65 cases), and group 2b (SNAC: 28 cases). In group 1, stage 4 SLIL lesions were confirmed in 36 cases and 9 were assessed as SLAC wrist deformity. In group 2a, single-portal arthroscopy confirmed the preoperative diagnosis in 74% of cases. In the remaining 26% of patients, arthroscopy modified the preoperative diagnosis: 1 case of SLAC 1 resulted in SLAC 2, 14 cases of SLAC 2 resulted in SLAC 3, 1 case of SLAC 3 resulted in SLAC 2. A case of SLAC 2 turned out to be an SLIL lesion stage 4. In group 2b, single-portal arthroscopy confirmed the preoperative diagnosis in 86% of cases. In the remaining 14% (4 cases), it modified the preoperative diagnosis: 1 of SNAC 1 resulted in SNAC 2 and the other in SNAC 3, 1 case of SNAC 2 turned out to be an SNAC 3, and 1 case of SNAC 3 resulted in SNAC 4. Single-portal wrist arthroscopy modified the preoperative diagnosis of wrist pathology in 42 patients over 138 cases. The use of single-portal wrist arthroscopy should be considered in the evaluation of the radiocarpal and midcarpal joints to allow accurate visualization of the joint surfaces for surgeon and patient planning. Observational study level of evidence IV.
- 17 July 2024
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
- Vol. 14 (06) , 546-554
Single-Portal Arthroscopy Improves the Assessment of Radial-sided Disorders of the Wrist
This study aimed to describe the technique, indications, and advantages of the single-portal arthroscopic approach for the diagnosis and staging of chronic radial-sided disorders, including scapholunate interosseous ligament (SLIL) tear, scapholunate advanced collapse (SLAC) and scaphoid nonunion advanced collapse (SNAC) deformities. The single portal technique was used in 138 patients affected by suspected SLIL lesions, SLAC and SNAC wrist injuries with positive clinical symptoms and inconclusive imaging (X-ray and MRI). It was used to grade the nature of the SLIL lesion and the extension of the osteochondral damage in the SLAC and SNAC wrist deformity to guide appropriate treatment. Patients were divided into group 1 (SLIL: 45 cases), group 2a (SLAC: 65 cases), and group 2b (SNAC: 28 cases). In group 1, stage 4 SLIL lesions were confirmed in 36 cases and 9 were assessed as SLAC wrist deformity. In group 2a, single-portal arthroscopy confirmed the preoperative diagnosis in 74% of cases. In the remaining 26% of patients, arthroscopy modified the preoperative diagnosis: 1 case of SLAC 1 resulted in SLAC 2, 14 cases of SLAC 2 resulted in SLAC 3, 1 case of SLAC 3 resulted in SLAC 2. A case of SLAC 2 turned out to be an SLIL lesion stage 4. In group 2b, single-portal arthroscopy confirmed the preoperative diagnosis in 86% of cases. In the remaining 14% (4 cases), it modified the preoperative diagnosis: 1 of SNAC 1 resulted in SNAC 2 and the other in SNAC 3, 1 case of SNAC 2 turned out to be an SNAC 3, and 1 case of SNAC 3 resulted in SNAC 4. Single-portal wrist arthroscopy modified the preoperative diagnosis of wrist pathology in 42 patients over 138 cases. The use of single-portal wrist arthroscopy should be considered in the evaluation of the radiocarpal and midcarpal joints to allow accurate visualization of the joint surfaces for surgeon and patient planning. Observational study level of evidence IV.
- 5 October 2021
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
- Vol. 12 (01) , 002-008
Allinside Anatomic Arthroscopic (3A) Reconstruction of Irreparable TFCC Tear
Background In recent years, new arthroscopic techniques have been introduced to address the irreparable tears of the triangular fibrocartilage complex (TFCC) (Palmer type 1B, Atzei class 4) by replicating the standard Adams–Berger procedure. These techniques, however, show the same limitations of the open procedure in relation to the anatomically defective location of the radial origins of the radioulnar ligaments (RUL) and the risk of neurovascular and/or tendon injury. Aiming to improve the quality of reconstruction and reduce surgical morbidity, a novel arthroscopic technique was developed, with the advantages of reproducing the anatomical origins of the RUL ligaments and providing all-inside tendon graft (TG) deployment and fixation. Description of Technique The Allinside anatomic arthroscopic (3A) technique is indicated for TG reconstruction of irreparable TFCC tears in the absence of distal radioulnar joint (DRUJ) arthritis. Standard wrist arthroscopy portals are used. A small incision in the radial metaphyseal area and arthroscopic control are required to set a Wrist Drill Guide and create two converging tunnels, whose openings are at the radial anatomical origins of the RUL. An ulnar tunnel is drilled at the fovea from inside-out via the 6U portal. A 3-mm tendon strip, from the palmaris longus or extensor carpi radialis brevis, is woven through the tunnels and then secured into the ulnar tunnel with an interference screw. Postoperative immobilization with restricted forearm rotation is discontinued at 5 weeks, and then postoperative rehabilitation is started. Patients and Methods The 3A technique was applied on 5 patients (2 females and 3 males), with an average age 42 years. DRUJ stability, range of motion (ROM), pain (0–10 visual analogue scale [VAS]), grip strength, modified Mayo wrist score (MMWS), and patient satisfaction were used for evaluation before surgery and at follow-up. Results No intraoperative or early complications were registered. At a mean follow-up of 26 months, DRUJ was stable in all patients, which recovered 99% ROM. Pain VAS decreased from 7 to 0.6. Grip strength increased from 38 to 48.8 Kgs. There were 4 excellent results and 1 good result on MMWS. All patient showed high satisfaction. Conclusions Although the 3A technique requires dedicated instrumentation and arthroscopic expertise, it takes advantage of improved intra-articular vision and minimized surgical trauma to reduce the risk of complications and obtain promising functional results.
- 5 October 2021
- Published by Georg Thieme Verlag KG in Journal of Wrist Surgery
- Vol. 12 (01) , 002-008
Allinside Anatomic Arthroscopic (3A) Reconstruction of Irreparable TFCC Tear
Background In recent years, new arthroscopic techniques have been introduced to address the irreparable tears of the triangular fibrocartilage complex (TFCC) (Palmer type 1B, Atzei class 4) by replicating the standard Adams–Berger procedure. These techniques, however, show the same limitations of the open procedure in relation to the anatomically defective location of the radial origins of the radioulnar ligaments (RUL) and the risk of neurovascular and/or tendon injury. Aiming to improve the quality of reconstruction and reduce surgical morbidity, a novel arthroscopic technique was developed, with the advantages of reproducing the anatomical origins of the RUL ligaments and providing all-inside tendon graft (TG) deployment and fixation. Description of Technique The Allinside anatomic arthroscopic (3A) technique is indicated for TG reconstruction of irreparable TFCC tears in the absence of distal radioulnar joint (DRUJ) arthritis. Standard wrist arthroscopy portals are used. A small incision in the radial metaphyseal area and arthroscopic control are required to set a Wrist Drill Guide and create two converging tunnels, whose openings are at the radial anatomical origins of the RUL. An ulnar tunnel is drilled at the fovea from inside-out via the 6U portal. A 3-mm tendon strip, from the palmaris longus or extensor carpi radialis brevis, is woven through the tunnels and then secured into the ulnar tunnel with an interference screw. Postoperative immobilization with restricted forearm rotation is discontinued at 5 weeks, and then postoperative rehabilitation is started. Patients and Methods The 3A technique was applied on 5 patients (2 females and 3 males), with an average age 42 years. DRUJ stability, range of motion (ROM), pain (0–10 visual analogue scale [VAS]), grip strength, modified Mayo wrist score (MMWS), and patient satisfaction were used for evaluation before surgery and at follow-up. Results No intraoperative or early complications were registered. At a mean follow-up of 26 months, DRUJ was stable in all patients, which recovered 99% ROM. Pain VAS decreased from 7 to 0.6. Grip strength increased from 38 to 48.8 Kgs. There were 4 excellent results and 1 good result on MMWS. All patient showed high satisfaction. Conclusions Although the 3A technique requires dedicated instrumentation and arthroscopic expertise, it takes advantage of improved intra-articular vision and minimized surgical trauma to reduce the risk of complications and obtain promising functional results.
- 29 September 2021
- Published by Springer Nature
- p. 93-346
Radio-Carpal and Midcarpal Arthroscopy