CWChing-Chih Wei

Ching-Chih Wei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ching-Chih Wei has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Automatic Error Compensation for Free-Form Surfaces by Using On-Machine Measurement Data

    by Wei-Chen Lee, Yu-Tzu Lee, Ching-Chih Wei

    Currently, most computer numerical control (CNC) controllers lack the function needed to compensate machining errors for free-form surfaces. The objective of this research was to enhance the accuracy and precision of the machined free-form surfaces of a workpiece using the mirror compensation method with the on-measurement data. By mirroring the points measured after semi-finishing, a new free-form surface for finishing machining can be automatically reconstructed. The surface can then be used to generate the cutting tool path to reduce the errors during finishing machining. In this research, three different types of surfaces were used for evaluating the proposed method. The results show that the proposed method reduced the standard deviations of the three surface geometries by 61%, 61%, and 32%, respectively. We also evaluated the tool radius modification method commonly used in the industry for error compensation and found that there is no substantial reduction on standard deviation. Therefore, the effectiveness of the error compensation method proposed in this research is evident.


  • Open Access

    Visualization of the setup location of a workpiece for five-axis machining

    by Wei-Chen Lee, Ching-Chih Wei

    The common way to perform five-axis machining is to generate the toolpaths by using CAM software, which usually considers only the interference between the tool and the workpiece. However, in the actual machining process, either the tool assembly may collide with the worktable, or one of the axes may travel over its limits. Once these problems occur, then re-adjustment of the setup location of the workpiece or the tool axis in the CAM software are needed to resolve the problems. Because both are based on trial-and-error, there is no guarantee that the readjustments will work. The objective of this research was to develop an algorithm to compute the domain where the workpiece can be set up without the mentioned problems. The algorithm first calculates machinable domains for all orientations of the tool axes along the toolpaths without traveling over-limit. The intersection of the domains, called initial machinable domain, is where the workpiece can be set up without traveling over the limits of the axes. The next step is to calculate the total interference domain where interference between the tool assembly and the worktable may occur. Subtracting the total interference domain from the initial machinable domain yields the machinable domain where neither over-limit nor interference between the tool assembly and the worktable will occur. Two cases are presented to demonstrate the feasibility of the proposed method. The results in both cases were verified by CAM simulation. The innovation of this research is to propose a method to compute the machinable setup domain which can directly show the setup location without the over-limit and interference issues during the machining process, especially the interference issue between machine components. In addition, it can eliminate the trial-and-error in CAM planning and make the setup domain visible, which makes it convenient and confident for the CAM engineer to determine the setup location.

  • Machining Error Compensation Based on the Reconstructed Free-Form Surfaces of CAD Models

    by Wei-Chen Lee, Yu-Tzu Lee, Ching-Chih Wei

    To reduce the machining errors as much as possible is a goal for many machine shops. After a part is machined and measured, the errors are known but how to reduce them is still an issue. The objective of this research was to develop an automatic system, which can adopt the measured data to modify the original CAD model of the machined part so that the cutting tool paths can be regenerated based on the reconstruction of the CAD model. Then we can perform finish machining on the part by using the new tool paths to remove much of the remaining errors. We already completed the two-dimensional profile machining and found promising. The errors of three squares with different orientations can be controlled within 0.0065 mm. We are continuing to work on the three-dimensional free-form surfaces.


  • Development of a machining monitoring and chatter suppression device

    by Wei-Chen Lee, Hsu-Cheng Cheng, Ching-Chih Wei

    A cyber-physical system that can automatically monitor the chatter of a machine tool and adjust the machining parameters to suppress the chatter is in need in the industry. For the CNC machine tools without network connection capability, to implement such a cyber-physical system is difficult. To overcome the problem, we developed a device that can be mounted on the panel of the controller of a CNC machine tool to monitor the chatter and to adjust the feed rate when the chatter occurs. A microphone was used as the sensor for the chatter detection. Preliminary results demonstrated the feasibility of the device. The device can be used on CNC machines with various controllers and can upgrade an unconnected CNC machine to become a CNC machine with cyber-physical capability.


  • Streaming data analysis framework for cyber-physical system of metal machining processes

    by Chao-Lung Yang, Hendri Sutrisno, Nai-Wei Lo, Zhi-Xuan Chen, Ching-Chih Wei, Han-Wei Zhang, Chin-Teng Lin, Chen-Lung Wei, Shang-Heng Hsieh

    Online monitoring and offline batch analyzing the data stream obtained from computer numeric control (CNC) machines and sensors deployed on manufacturing site are the core technology of Cyber-Physical System (CPS). In order to analyze data stream collected continually, in this research, the data analysis framework consist of supervisory control and data acquisition (SCADA), edge computing and cloud computing is proposed. By integrating signal smoothing and anomaly pattern detection techniques, the significant unique patterns of data stream can be discovered and stored for further usage in CPS application.


  • Implementation of a data acquisition system for heterogeneous machines

    by Ching-Chih Wei, Yu-Tzu Lee, Kai-Siang Cao, Wei-Chen Lee

    The cyber-physical system is a core issue of Industrie 4.0. One of the main tasks is to create a digital twin with acquired data from a physical system. In this study, a data acquisition system was constructed for the heterogeneous machines using the sensor-based I/O module. Three different types of heterogeneous machines on the shop floor were considered. The results of the study may be applied to other types of machines. In the end, the application of monitoring machine operation status was conducted. The data were archived into MySQL database for the further application.


  • Improving machining accuracy by automatic compensation based on the off-line measurement

    by Wei-Chen Lee, Jeng-Yu Wang, Ching-Chih Wei

    The inaccuracy of CNC machining may come from several factors, such as machine vibration, dynamic stiffness, and thermal expansion. Once a workpiece is machined inaccurately, we can modify the NC program to generate compensation tool paths, and then perform the finishing process. However, the modification of the NC code is time-consuming, and the results may not be satisfactory as well. We propose a method in the paper to improve the machining accuracy by automatically modifying the NC program for compensation based on the data obtained from an off-line measurement. Then the workpiece could be finished along the tool paths to compensate the errors caused by the CNC machine. A case study showed that the machining accuracy of a workpiece could be enhanced by using this compensation method.


  • Workspace digitization for five-axis machining

    by Wei-Chen Lee, Ching-Chih Wei

    While performing five-axis machining, it is usually expected to complete all the cutting without having to re-clamp the workpiece. In other words, the workpiece should remain at the same location during the whole five-axis machining process. The current procedure to perform five-axis machining on a workpiece is to use CAM software to generate the tool paths and then perform a simulation or real cutting to verify if it is possible to complete the machining process without having to re-clamp the workpiece. If the simulation or the actual cutting fails to achieve this, the trial-and-error method is usually introduced to adjust the location of the workpiece. Then we need to rerun the simulation or actual cutting to verify the adjustment. The trial-and-error process can be time-consuming, and there is no guarantee that a viable location can be obtained. The objective of this research was to develop a method to establish the workspace for a workpiece on a five-axis machine. It can guarantee that no re-clamping is needed as long as the workpiece is placed in the final workspace. First, we construct a preliminary workspace based on the travel limits and the location of all the interpolation points along the cutting paths. Then we obtain the keep-out zones so that the collision between the cutting tool and the worktable will not occur as long as the workpiece origin is outside the keep-out zones. Finally, the workspace without travel-limit or collision problems can be obtained by subtracting the keep-out zones from the preliminary workspace. The workspace is digitized to facilitate the calculation and visualization. In the end, a case study was conducted to illustrate how to apply the method to a real task. It was shown that workspace obtained by using the method was free of the mentioned problems.

  • Machinability analysis and setup optimization for five-axis machining

    by Wei-Chen Lee, Ching-Chih Wei

    Two potential problems are usually ignored by CAM software for five-axis machining: one is the overtravel for the three linear axes of the five-axis machine tool, and the other is the collision between the spindle and the worktable. The objective of this research was to propose a method based on the visibility map and then, develop a computer program to prevent the mentioned problems from happening. In addition, the optimal position for the workpiece and the optimal tool axis along the tool paths can subsequently be determined through the proposed method. Two case studies were performed to demonstrate that the method presented in the paper is feasible.