Patrick John Adrian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Patrick John Adrian has a total of 355 co-authors. Here are the top co-authors by number of shared publications:
- Johan A. Frenje
Massachusetts Institute of Technology , Cambridge, Massachusetts 02139
31 shared publications - Maria Gatu Johnson
Massachusetts Institute of Technology , Cambridge, Massachusetts 02139
31 shared publications - Richard D. Petrasso
Massachusetts Institute of Technology 1 , Cambridge, Massachusetts 02139
23 shared publications - N. V. Kabadi
Laboratory for Laser Energetics, University of Rochester , 250 E. River RD, Rochester, New York 14623
20 shared publications - Graeme D. Sutcliffe
Lawrence Livermore National Laboratory 4 , Livermore, California 94550
17 shared publications - Andrew Birkel
Massachusetts Institute of Technology
14 shared publications
Latest Publications
- Open Access
- 23 September 2026
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 8 (3)
Separation of light ion species in the transition from shock-dominated to compressive inertial confinement fusion implosions
A series of glass-shell D He 3 gas-filled implosions was carried out on the OMEGA Laser Facility. In these experiments, the thicknesses of the glass shells were varied from 4.2 to 9.4 µ m , producing implosions that spanned from shock-to-compression-dominated emission. Data from several diagnostics were used to infer the conditions and nuclear yields for the D He 3 -p and DD-n reactions during shock and compression burns. From the inferred yields and ion temperatures, the deuterium fractions in the hot spot during both emission phases were estimated. It is found that there is a substantial surplus ( ∼ 5 % ) of deuterium in the hot spot compared to the initial fill fraction during both shock and compression phases for all implosion types. This is the first measurement indicating persistent species separation throughout both phases of inertial confinement fusion (ICF) implosions. In ICF implosions, deviations from a 50:50 species ratio will decrease the fusion rate, directly impacting performance. Future ICF implosion design work would benefit from including models that capture multi-ion dynamics.
- 23 September 2026
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 8 (3)
Open AccessSeparation of light ion species in the transition from shock-dominated to compressive inertial confinement fusion implosions
A series of glass-shell D He 3 gas-filled implosions was carried out on the OMEGA Laser Facility. In these experiments, the thicknesses of the glass shells were varied from 4.2 to 9.4 µ m , producing implosions that spanned from shock-to-compression-dominated emission. Data from several diagnostics were used to infer the conditions and nuclear yields for the D He 3 -p and DD-n reactions during shock and compression burns. From the inferred yields and ion temperatures, the deuterium fractions in the hot spot during both emission phases were estimated. It is found that there is a substantial surplus ( ∼ 5 % ) of deuterium in the hot spot compared to the initial fill fraction during both shock and compression phases for all implosion types. This is the first measurement indicating persistent species separation throughout both phases of inertial confinement fusion (ICF) implosions. In ICF implosions, deviations from a 50:50 species ratio will decrease the fusion rate, directly impacting performance. Future ICF implosion design work would benefit from including models that capture multi-ion dynamics.
- Open Access
- 1 September 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (9)
The next-generation magnetic recoil spectrometer for measurements of the absolute neutron spectrum at Pacific Fusion’s demonstration system
The MAgnetic Recoil Spectrometer (MARS) will be used to diagnose neutron spectra from deuterium–tritium fusion experiments at Pacific Fusion’s demonstration system, providing time-integrated measurements of yield (13–15 MeV), ion temperature, fuel and liner areal density, and alpha heating. Two design advances distinguish MARS from prior magnetic recoil spectrometers. First, redesigned ion optics reduce the focal-plane length to a size compatible with a silicon strip detector, making MARS the first inertial confinement fusion magnetic recoil neutron spectrometer with an electronic readout, enabling real-time data analysis and per-channel time-gating. Second, a dual-foil geometry (half CH2, half CD2) enables simultaneous spectral measurements of recoil protons and deuterons in a single shot, expanding neutron energy coverage to ∼6–20 MeV. The conceptual design of the instrument, synthetic modeling framework, and shielding strategy are described. Monte Carlo transport and ion optics simulations show signal-to-background ≫10 across the spectrum except for the alpha knock-on tail, with per-channel electronic time-gating providing additional background suppression. The open-source simulation framework additionally serves as a synthetic diagnostic for forward fits of parametric plasma models, showing good agreement with the true parameters.
- 1 September 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (9)
Open AccessThe next-generation magnetic recoil spectrometer for measurements of the absolute neutron spectrum at Pacific Fusion’s demonstration system
The MAgnetic Recoil Spectrometer (MARS) will be used to diagnose neutron spectra from deuterium–tritium fusion experiments at Pacific Fusion’s demonstration system, providing time-integrated measurements of yield (13–15 MeV), ion temperature, fuel and liner areal density, and alpha heating. Two design advances distinguish MARS from prior magnetic recoil spectrometers. First, redesigned ion optics reduce the focal-plane length to a size compatible with a silicon strip detector, making MARS the first inertial confinement fusion magnetic recoil neutron spectrometer with an electronic readout, enabling real-time data analysis and per-channel time-gating. Second, a dual-foil geometry (half CH2, half CD2) enables simultaneous spectral measurements of recoil protons and deuterons in a single shot, expanding neutron energy coverage to ∼6–20 MeV. The conceptual design of the instrument, synthetic modeling framework, and shielding strategy are described. Monte Carlo transport and ion optics simulations show signal-to-background ≫10 across the spectrum except for the alpha knock-on tail, with per-channel electronic time-gating providing additional background suppression. The open-source simulation framework additionally serves as a synthetic diagnostic for forward fits of parametric plasma models, showing good agreement with the true parameters.
- 24 November 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (5) , L053203
Observation of kinetic mix enhancement in thin-shell OMEGA implosions
Recent separated reactant experiments for thin-shell (6µm) shock-driven implosions on OMEGA have demonstrated significant mix from a buried deuterated layer of the shell into the hot spot. Time resolved D^{3}He-p reaction history data demonstrate a (50±20)ps shift earlier in peak nuclear emission for separated reactant experiments relative to control, in contrast to past experimental data for thicker, 20µm shells with no laser burn through that show a 75ps delay due to the time required for hydrodynamic instabilities to develop. This contrast suggests that the mix mechanism was not hydrodynamic. Ion kinetic simulations utilizing fall line analyses show much closer agreement with mix yield and temperature than diffusion models, predicting a D^{3}He-p mix yield of 1.7×10^{9} as compared to the experimental value of 9.3(±2.1)×10^{8}. This is three orders of magnitude closer than the fall line analysis from a hydrodynamic simulation with an inline diffusive mix model, which suggests minimal mix and D^{3}He-p yields of 5×10^{5}. This makes kinetic mechanisms the only feasible explanation for the mix seen, demonstrating impact of a non-standard mix mechanism. An analytical model of this kinetic mix mechanism suggests that it can remain significant in situations when the shell expands significantly to low densities, and diffusive models predict negligible mix. Kinetic mix will impact multiple types of high energy density, laser-driven fusion experiments including high-adiabat direct drive cryoexperiments, nuclear cross section experiments, and thin-shell polar direct drive experiments used to tune heat conduction models.
- 24 November 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (5) , L053203
Observation of kinetic mix enhancement in thin-shell OMEGA implosions
Recent separated reactant experiments for thin-shell (6µm) shock-driven implosions on OMEGA have demonstrated significant mix from a buried deuterated layer of the shell into the hot spot. Time resolved D^{3}He-p reaction history data demonstrate a (50±20)ps shift earlier in peak nuclear emission for separated reactant experiments relative to control, in contrast to past experimental data for thicker, 20µm shells with no laser burn through that show a 75ps delay due to the time required for hydrodynamic instabilities to develop. This contrast suggests that the mix mechanism was not hydrodynamic. Ion kinetic simulations utilizing fall line analyses show much closer agreement with mix yield and temperature than diffusion models, predicting a D^{3}He-p mix yield of 1.7×10^{9} as compared to the experimental value of 9.3(±2.1)×10^{8}. This is three orders of magnitude closer than the fall line analysis from a hydrodynamic simulation with an inline diffusive mix model, which suggests minimal mix and D^{3}He-p yields of 5×10^{5}. This makes kinetic mechanisms the only feasible explanation for the mix seen, demonstrating impact of a non-standard mix mechanism. An analytical model of this kinetic mix mechanism suggests that it can remain significant in situations when the shell expands significantly to low densities, and diffusive models predict negligible mix. Kinetic mix will impact multiple types of high energy density, laser-driven fusion experiments including high-adiabat direct drive cryoexperiments, nuclear cross section experiments, and thin-shell polar direct drive experiments used to tune heat conduction models.
- Open Access
- 1 October 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (10)
First indirectly driven liquid-DT filled double shell implosions at the National Ignition Facility
Double shell implosions aim to explore material mixing under fusion conditions in a volume burn geometry using high-Z metal pushers. High-Z pushers are more compressible than low-Z pushers enabling high stagnation pressure which reduces the required implosion speed while maintaining a low pusher adiabat despite strong shock heating. Additionally, the use of a small fuel mass reduces the fuel internal energy required for ignition, thus achieving stable platforms with reasonable fusion output to conduct controlled experiments. These factors make volume burn in a double shell implosion highly promising. Recently, a series of liquid-DT filled, indirectly driven, double shell implosions were conducted at the National Ignition Facility with laser drives reaching up to 1.5 MJ. These experiments achieved a maximum DT neutron yield of 1.67 × 1014 (yield—479 J), DT ion temperature of 2.6 keV, fuel areal density (ρR) of 0.15 g/cm2, and stagnation pressure of 79 Gbar. Over the course of these shots, the DT neutron yield has increased by an order of magnitude largely from improved mitigation of outer shell assembly joint driven instability growth using thicker gold plating at the assembly joint. Further performance improvements are expected by enhancing outer-to-inner shell kinetic energy transfer and refined mitigation of degradations from engineering features such as the outer shell joint, fill tube, and surface roughness.
- 1 October 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (10)
Open AccessFirst indirectly driven liquid-DT filled double shell implosions at the National Ignition Facility
Double shell implosions aim to explore material mixing under fusion conditions in a volume burn geometry using high-Z metal pushers. High-Z pushers are more compressible than low-Z pushers enabling high stagnation pressure which reduces the required implosion speed while maintaining a low pusher adiabat despite strong shock heating. Additionally, the use of a small fuel mass reduces the fuel internal energy required for ignition, thus achieving stable platforms with reasonable fusion output to conduct controlled experiments. These factors make volume burn in a double shell implosion highly promising. Recently, a series of liquid-DT filled, indirectly driven, double shell implosions were conducted at the National Ignition Facility with laser drives reaching up to 1.5 MJ. These experiments achieved a maximum DT neutron yield of 1.67 × 1014 (yield—479 J), DT ion temperature of 2.6 keV, fuel areal density (ρR) of 0.15 g/cm2, and stagnation pressure of 79 Gbar. Over the course of these shots, the DT neutron yield has increased by an order of magnitude largely from improved mitigation of outer shell assembly joint driven instability growth using thicker gold plating at the assembly joint. Further performance improvements are expected by enhancing outer-to-inner shell kinetic energy transfer and refined mitigation of degradations from engineering features such as the outer shell joint, fill tube, and surface roughness.
- Open Access
- 1 July 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (7)
A database and meta-analysis on the performance of exploding pusher implosions conducted at OMEGA
A database of 222 exploding pusher implosions conducted at the OMEGA Laser Facility is presented. The dataset consists of glass-shell capsules filled with varying pressures of D2, T2, and 3He, which were imploded using square laser pulses with intensities ranging from 1 to 1 ×1015 W/cm2. The database includes measurements of bang times, ion temperatures, and yields from the DD, D3He, and DT fusion reactions. A semi-analytic exploding pusher model is introduced, which effectively captures the observed trends in the data. This model predicts that the measurements scale according to a power-law relation based on the initial capsule and laser conditions. A generalized power-law scaling relation is directly fit to each dataset, providing a useful interpolation of the entire database. Overall, the database provides a valuable resource to estimating bang times, temperatures, and yields for the design of future experiments. Additionally, it provides a diverse set of data for validating more advanced implosion physics models.
- 1 July 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (7)
Open AccessA database and meta-analysis on the performance of exploding pusher implosions conducted at OMEGA
A database of 222 exploding pusher implosions conducted at the OMEGA Laser Facility is presented. The dataset consists of glass-shell capsules filled with varying pressures of D2, T2, and 3He, which were imploded using square laser pulses with intensities ranging from 1 to 1 ×1015 W/cm2. The database includes measurements of bang times, ion temperatures, and yields from the DD, D3He, and DT fusion reactions. A semi-analytic exploding pusher model is introduced, which effectively captures the observed trends in the data. This model predicts that the measurements scale according to a power-law relation based on the initial capsule and laser conditions. A generalized power-law scaling relation is directly fit to each dataset, providing a useful interpolation of the entire database. Overall, the database provides a valuable resource to estimating bang times, temperatures, and yields for the design of future experiments. Additionally, it provides a diverse set of data for validating more advanced implosion physics models.
- Open Access
- 1 April 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (4)
A compact x-ray spectrometer for measurements of electron temperature distributions in inertial confinement fusion implosions at OMEGA
The Wedge Range Filter (WRF), commonly used for proton spectroscopy at the OMEGA Laser Facility and National Ignition Facility, is adapted to measure the x-ray continuum spectrum through transmission measurement using a continuous-gradient filter. Continuum x rays emitted from the hotspot of an implosion contain information about the plasma composition and electron temperature. The WRF data are leveraged to probe this distribution, specifically the electron temperature distribution. In this work, the data recorded with the WRF are forward modeled using a temperature distribution model folded with the WRF response function. An uncertainty analysis is conducted through a Bayesian regression algorithm using a Hamiltonian Monte Carlo sampler. This analysis enables the uncertainties in the instrument response to be folded into the uncertainty estimation of the electron temperature and absolute x-ray emission. Data analysis for a series of OMEGA implosions is presented and compared with radiation hydrodynamic simulations.
- 1 April 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (4)
Open AccessA compact x-ray spectrometer for measurements of electron temperature distributions in inertial confinement fusion implosions at OMEGA
The Wedge Range Filter (WRF), commonly used for proton spectroscopy at the OMEGA Laser Facility and National Ignition Facility, is adapted to measure the x-ray continuum spectrum through transmission measurement using a continuous-gradient filter. Continuum x rays emitted from the hotspot of an implosion contain information about the plasma composition and electron temperature. The WRF data are leveraged to probe this distribution, specifically the electron temperature distribution. In this work, the data recorded with the WRF are forward modeled using a temperature distribution model folded with the WRF response function. An uncertainty analysis is conducted through a Bayesian regression algorithm using a Hamiltonian Monte Carlo sampler. This analysis enables the uncertainties in the instrument response to be folded into the uncertainty estimation of the electron temperature and absolute x-ray emission. Data analysis for a series of OMEGA implosions is presented and compared with radiation hydrodynamic simulations.
- 25 March 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (12) , 125101
Biermann-Battery-Driven Magnetized Collisionless Shock Precursors in Laser-Produced Plasmas
This Letter reports the first complete observation of magnetized collisionless shock precursors formed through the compression of Biermann-battery magnetic fields in laser produced plasmas. At OMEGA, lasers produce a supersonic CH plasma flow which is magnetized with Biermann-battery magnetic fields. The plasma flow collides with an unmagnetized hydrogen gas jet plasma to create a magnetized shock precursor. The situation where the flowing plasma carries the magnetic field is similar to the Venusian bow shock. Imaging 2ω Thomson scattering confirms that the interaction is collisionless and shows density and temperature jumps. Proton radiographs have regions of strong deflections and FLASH magnetohydrodynamic (MHD) simulations show the presence of Biermann fields in the Thomson scattering region. Electrons are accelerated to energies of up to 100 keV in a power-law spectrum. OSIRIS particle-in-cell (PIC) simulations, initialized with measured parameters, show the formation of a magnetized shock precursor and corroborate the experimental observables.
- 25 March 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (12) , 125101
Biermann-Battery-Driven Magnetized Collisionless Shock Precursors in Laser-Produced Plasmas
This Letter reports the first complete observation of magnetized collisionless shock precursors formed through the compression of Biermann-battery magnetic fields in laser produced plasmas. At OMEGA, lasers produce a supersonic CH plasma flow which is magnetized with Biermann-battery magnetic fields. The plasma flow collides with an unmagnetized hydrogen gas jet plasma to create a magnetized shock precursor. The situation where the flowing plasma carries the magnetic field is similar to the Venusian bow shock. Imaging 2ω Thomson scattering confirms that the interaction is collisionless and shows density and temperature jumps. Proton radiographs have regions of strong deflections and FLASH magnetohydrodynamic (MHD) simulations show the presence of Biermann fields in the Thomson scattering region. Electrons are accelerated to energies of up to 100 keV in a power-law spectrum. OSIRIS particle-in-cell (PIC) simulations, initialized with measured parameters, show the formation of a magnetized shock precursor and corroborate the experimental observables.
- Open Access
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Constraining the 3He +3He Gamow energy probed in high energy density plasmas at the National Ignition Facility
Polar-direct-drive implosions at the National Ignition Facility generated large plasma volumes to study the 3He + 3He fusion reaction. The ion temperature, which determines the Gamow peak energy, was constrained by isolating the thermal contribution to the D3He-proton spectral width in a 3He plasma doped with deuterium. X-ray penumbral imaging was used to measure electron temperature, density, and hotspot volume, which was subsequently used to model the spectral broadening from plasma stopping power. Results showed 30% of the D3He-proton spectral width was due to stopping power, with residual flows contributing ≈10%. The 3He temperature was determined as T3He = 12.4 ± 3.2 keV, corresponding to a Gamow energy of 95 ± 14 keV. These experiments achieved the lowest Gamow energy to date for studying 3He + 3He fusion in high energy density plasma, approaching conditions in the Sun.
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Open AccessConstraining the 3He +3He Gamow energy probed in high energy density plasmas at the National Ignition Facility
Polar-direct-drive implosions at the National Ignition Facility generated large plasma volumes to study the 3He + 3He fusion reaction. The ion temperature, which determines the Gamow peak energy, was constrained by isolating the thermal contribution to the D3He-proton spectral width in a 3He plasma doped with deuterium. X-ray penumbral imaging was used to measure electron temperature, density, and hotspot volume, which was subsequently used to model the spectral broadening from plasma stopping power. Results showed 30% of the D3He-proton spectral width was due to stopping power, with residual flows contributing ≈10%. The 3He temperature was determined as T3He = 12.4 ± 3.2 keV, corresponding to a Gamow energy of 95 ± 14 keV. These experiments achieved the lowest Gamow energy to date for studying 3He + 3He fusion in high energy density plasma, approaching conditions in the Sun.