DLDongju Lee

Dongju Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dongju Lee has a total of 196 co-authors. Here are the top co-authors by number of shared publications:

  • Seulgi Kim

    Department of Urban, Energy, and Environmental Engineering Chungbuk National University Chungdae‐ro 1, Seowon‐Gu Cheongju Chungbuk 28644 Korea

    25 shared publications
  • Sung Ho Song

    Division of Advanced Materials Engineering, Center for Advanced Materials and Parts of Powders, Kongju National University, Cheonan-si 31080, Republic of Korea

    19 shared publications
  • Seoyeon Yuk

    Department of Urban, Energy, and Environmental Engineering, Chungbuk National University, Cheongju, Republic of Korea

    10 shared publications
  • Seojin Woo

    Department of Urban Energy and Environmental Engineering Chungbuk National University Cheongju Chungbuk Republic of Korea

    6 shared publications
  • Yunhee Ahn

    Department of Urban, Energy, and Environmental Engineering Chungbuk National University Cheongju Chungbuk Republic of Korea

    6 shared publications
  • Hyungsub Kim

    Neutron Science Division Korea Atomic Energy Research Institute (KAERI) 111 Daedeok‐daero 989 Beon‐Gil, Yuseong‐gu Daejeon 34057 Korea

    5 shared publications

Latest Publications

  • Open Access

    Sulfonate‐Functionalized Boron Nitride Interfacial Layers for Long‐Life Zinc Metal Anodes

    by Ingyu Choi, Minseo Kim, Ki‐Min Roh, Sung Ho Song, Seulgi Kim, Dongju Lee

    The interfacial instability of metallic Zn associated with nonuniform Zn 2 + transport, dendrite growth, hydrogen evolution, and corrosion, limits the durability of aqueous zinc‐ion batteries. In this study, a sulfonate‐bearing artificial interphase was constructed by mixing boron nitride nanosheets (BNNSs) with sodium dodecylbenzene sulfonate (SDBS), followed by scalable spray coating of the suspension onto Zn. The insulating BNNS framework afforded mechanical protection. The negatively charged sulfonate groups improved nanosheet dispersion and Zn 2+ affinity, and regulated interfacial Zn 2+ transport. An SDBS–BNNS@Zn electrode exhibited a lower Zn nucleation overpotential (24.67 mV) and interfacial activation energy (8.31 kJ mol −1 ) compared to BNNS@Zn (25.99 mV and 15.52 kJ mol −1 , respectively). Consequently, symmetric Zn cells exhibited stable plating/stripping for 1100 h at both 0.5 mA cm −2 /0.5 mAh cm −2 and 1 mA cm −2 /1 mAh cm −2 . Ex situ scanning electron microscopy after 1000 h revealed compact, plate‐like Zn deposits, and electrochemical measurements confirmed that hydrogen evolution and corrosion were suppressed. Zn||vanadium oxide full cells exhibited improved capacity, better interfacial kinetics, cycling stability, and an enhanced rate capability. This study presents a simple strategy for conversion of inert BNNSs to ion‐regulating interphases for durable Zn metal anodes.

  • Engineering Nb–O–Si interfacial bonds in Nb2C MXene–SiO2/C hybrids for structurally stable, high-capacity lithium-ion battery anodes

    by Erdenebayar Baasanjav, Eung Joon Lee, Thillai Govindaraja Senthamaraikannan, Srinivasan Alagar, Eun Mi Kim, Chandra Sekhar Rout, Seo Jin Woo, Dong Ju Lee, Dong-Hee Lim, Sang Mun Jeong

  • Open Access

    Engineering MnNiP x Cathode via Dual Role of Mn: Simultaneous Enhancement of Activity and Intermittent Operation Durability

    by Ik‐Sun Kim, Jungwoo Choi, Sechan Lee, Jung Eun Park, Changsoo Lee, Jongsu Seo, Ji Hee Kwon, Gisu Doo, Hyeonjung Park, Dongju Lee, et al.

    Here, we propose Mn co‐deposition into phosphorus‐doped nickel (NiP x ) as a sacrificial strategy to protect active Ni–P phases while simultaneously improving catalytic activity. NiP x has been widely studied as an active cathode material for the hydrogen evolution reaction (HER) in alkaline water electrolysis. However, NiP x often suffers from irreversible surface oxidation during repeated on–off cycling, such as that caused by intermittent renewable energy. We found that Mn was preferentially oxidized during cycling, providing sacrificial protection against Ni oxidation. This sacrificial process also induced surface reconstruction and promoted the formation of a self‐formed porous Mn oxide layer. The morphology of this reconstructed layer was critical for durability, as only optimized Mn incorporation retained the porous and open surface structure. Besides, X‐ray and density functional theory (DFT) analysis confirmed that the metallic Mn incorporated in the Ni–P layer enhances HER activity through electronic modulation via charge donation to nearby Ni‐P sites. Optimized Mn incorporation (Mn:Ni = 1:9 in the deposition bath) enabled to achieve lower HER overpotential and markedly enhanced cycling stability. The feasibility of this approach was further verified in a single cell test. This study offers promising strategies for designing robust HER electrodes suitable for discontinuous water electrolysis operation.

  • Open Access

    Performance Enhancement of LCM-Based Additively Manufactured Magnetic Composites via Spark Plasma Sintering

    by Mijin Kim, Dongwoon Shin, Taeho Ha, Dongju Lee, Byungheon Oh, Pil-Ho Lee

    This study explores spark plasma sintering (SPS) to improve the microstructural integrity and magnetic performance of NdFeB composite parts produced by lithography-based composites manufacturing (LCM). The composites, containing 84 wt.% NdFeB in a photosensitive polymer matrix, were magnetically aligned during printing using an in-situ field. SPS, applying pulsed current and uniaxial pressure under vacuum, was used to achieve densification while limiting grain growth. Samples were sintered at various temperatures with or without a magnetic field. Microstructure was examined via electron backscatter diffraction (EBSD) and X-ray diffraction (XRD), and magnetic properties were measured by Vibrating Sample Magnetometer (VSM). Optimized moderate-temperature, field-assisted sintering enhanced densification and magnetic anisotropy, whereas excessive sintering caused degradation. The combined use of in-situ magnetic alignment and SPS enables dense, anisotropic additively manufactured NdFeB composites with improved performance.

  • Interface‐Engineered Polyimide/Carbon Nanotube Nanocomposites via Poly(Amic Acid) Salt Functionalization for Enhanced Mechanical and Electrothermal Performance

    by Hyeonsoo Oh, Miyeon Lee, Se Gyu Jang, Seo Gyun Kim, Bon‐Cheol Ku, Dongju Lee, Nam‐Ho You

    Polyimide (PI) films are widely utilized in advanced engineering applications due to their excellent thermal stability, mechanical integrity, and electrical insulation. Despite these advantages, their intrinsic brittleness limits broader structural implementation. In this work, carbon nanotubes (CNTs) were non‐covalently functionalized using poly(amic acid) salt (PAS), a precursor polymer structurally similar to PI, to enhance filler dispersion and interfacial compatibility. The PAS modification markedly improved CNTs distribution within the PI matrix, leading to strengthened interfacial interactions and more efficient stress transfer. Mechanical testing showed that neat PI exhibited a tensile strength of 128.38 MPa, whereas incorporation of 0.5 wt% PAS‐CNT the increased the tensile strength to 214.44 MPa, corresponding to a 67.03% enhancement. The tensile modulus simultaneously increased from 4.41 to 7.96 GPa (80.50% improvement). Specifically, the PAS‐CNT/PI nanocomposites reached a conductivity of 168.55 S/m was achieved, which is approximately 7.86 times higher than that of pristine CNT/PI nanocomposites (21.43 S/m) at the same filler content (5 wt%). The improved conductivity enabled rapid and stable electrothermal heating under applied voltage. These results demonstrate that PAS‐assisted non‐covalent functionalization is an effective strategy for improving the dispersion and multifunctional performance of PI/CNT nanocomposites for electrothermal film applications.

  • Open Access

    Frequency-tunable acoustic absorption in anisotropic graphene aerogels via morphological engineering of internal barriers

    by Jaeeun Jin, Jae Gyu Ahn, An So Yeon, Ryunkyong Lee, Taeyoung Park, Dong Ju Lee, Sung Ho Song

    The development of high-efficiency acoustic attenuation media has been significantly advanced by the integration of graphene derivatives and carbon nanotubes, taking advantage of their superior chemical and mechanical attributes. Nevertheless, a primary obstacle in engineering these materials involves the precise morphological control of low-dimensional nanostructures—specifically regarding the prevention of random restacking and the achievement of uniform directional alignment within the porous framework. Furthermore, systematic investigations into the acoustic properties of pure graphene aerogels—specifically regarding how flake dimensions and loading influence the barrier effect and structural anisotropy—remain largely unexplored. To address these challenges, this research demonstrates a systematic approach to engineering anisotropic graphene-based aerogels featuring frequency-tunable acoustic absorption through synergistic modulation via bidirectional freeze-casting. By employing the Ice-Segregation-Induced Self-Assembly (ISISA) process, the study successfully fabricated highly ordered, vertically and horizontally aligned lamellar networks. Morphological investigations revealed a distinct structural divergence: aerogels based on large graphene flakes formed continuous, streamlined micro-channels with minimal structural resistance, whereas variants utilizing smaller flakes developed a high density of internal structural barriers, or septa. The superior performance of these structures is driven by intensified visco-thermal energy dissipation and multiple scattering effects, both of which are facilitated by increased tortuosity and internal air-flow resistance. Furthermore, by manipulating the spatial orientation of the framework relative to the incident sound vector, we proposed a mechanism to explain how the barrier effect sustains enhanced absorption in transverse modes compared to longitudinal ones. These findings establish a robust structure–property relationship between microscopic precursor dimensions and macroscopic hierarchical architecture, offering a new paradigm for high-performance, multifunctional carbon-based noise insulators.


  • Open Access

    Analysis of Sintering Behavior and Microstructure of Mo-Ta Alloy under Different Sintering Conditions

    by Byungheon Oh, Geon Kim, Jio Yoon, Dongju Lee

    Molybdenum-tantalum (Mo-Ta) alloy sputtering targets are widely used in electronic applications owing to their excellent corrosion resistance, high thermal and electrical conductivity, and low electrical impedance. In this study, the sintering behavior and microstructural evolution of Mo-Ta alloys fabricated by spark plasma sintering (SPS) were investigated as a function of sintering temperature in the range of 1650-1800 °C. X-ray diffraction and microstructural analyses indicate that densification and alloying of the mixed Mo and Ta powders occur simultaneously during the SPS process. Increasing the sintering temperatures significantly enhances densification, and the compact sintered at 1750 °C achieves a relative density exceeding 99%, which is essential for high-quality sputtering target applications. The sintered alloys exhibit a clear temperature-dependent grain growth behavior together with a homogeneous microstructure and randomly oriented grains. These results demonstrate that appropriate control of sintering temperature enables the fabrication of dense and microstructurally uniform Mo-Ta alloys, providing valuable guidelines for optimizing sputtering target performance.


  • Open Access

    Redistributing Cobalt and Tungsten From WC –Co Soft Scrap Toward Sustainable Cathode and Coating Materials for Lithium‐Ion Batteries

    by Seulgi Kim, Kyoung Sun Kim, Young‐Sang Yu, Ingyu Choi, Seungo Jeong, Eun‐Jung Shin, Seung‐Hyun Kim, Sung‐Hak Jo, Seung‐Ho Yu, Hyungsub Kim, et al.

    The scarcity of cobalt and tungsten causes unstable supply and sharp price fluctuations, emphasizing the urgent need for recycling and redistribution strategies. Herein, we develop an efficient upcycling route for recovering high‐purity tungsten carbide and cobalt from cemented carbide (tungsten carbide–cobalt) soft scrap via mechanochemical ball milling and solvent extraction, and resynthesizing it into lithium‐ion battery cathode materials. In this process, the residual nickel impurity is repurposed as a stabilizing dopant, reinforcing the layered framework at the cobalt sites of LiCoO 2 and suppressing lattice collapse even under high‐voltage cycling. Benefiting from nickel incorporation at cobalt sites, the resynthesized LiCoO 2 exhibits markedly reduced c‐lattice shrinkage and suppressed phase transitions at high voltages, evidenced by in situ X‐ray diffraction. Such dopant‐induced stabilization enables remarkable electrochemical durability, as resynthesized LiCoO 2 preserves over 60% of its capacity after 1000 cycles at 4.3 V (1 C) and retains 86.78% after 200 cycles at 4.5 V (0.2 C). Simultaneously, the tungsten carbide fraction is converted into tungsten trioxide and employed to modify nickel‐rich layered oxides, mitigating interfacial degradation and improving durability. This cross‐sectoral upcycling strategy exemplifies a circular economy approach by converting cemented carbide soft scrap from hard‐metal applications into cathodes, directly linking industrial waste streams to the lithium‐ion battery supply chain.

  • Open Access

    Ion‐Regulating SPEEK–BNNS Hybrid Interfaces Enabling Low‐Barrier Zn‐Ion Transport and Dendrite‐Free Zinc Anodes

    by Minseo Kim, Hyunki Kim, Seojin Woo, Ingyu Choi, Seulgi Kim, Han Seul Kim, Dongju Lee

    The practical application of aqueous Zn‐ion batteries (AZIBs) is severely limited by unstable Zn‐metal anodes caused by dendritic growth and parasitic interfacial reactions. Herein, we report an organic–inorganic hybrid protective layer composed of sulfonated poly(ether ether ketone) (SPEEK) and boron nitride nanosheets (BNNS), fabricated via a scalable and controllable spray‐coating process. The hybrid architecture synergistically integrates the mechanical robustness of BNNS with the ion‐regulating functionality of SPEEK, effectively addressing the trade‐off between interfacial rigidity and ionic transport. This structure promotes uniform Zn 2+ flux, suppresses dendrite growth, and stabilizes the Zn/electrolyte interface. Theoretical calculations, including density functional theory and nudged elastic band analysis, further reveal that SO 3 H groups in SPEEK lower the Zn 2+ adsorption energy and migration barriers, facilitating Zn 2+ transport across the protective layer. The hybrid protective layer enables long‐term stable Zn plating/stripping (>1800 h at 1 mA cm −2 , 1 mAh cm −2 ) and uniform, dendrite‐free deposition, as directly visualized by in situ optical microscopy. Consistent interfacial stabilization is further confirmed in Zn/MnO 2 full cells with improved rate capability and capacity retention. This work highlights a practical and rational interfacial design strategy for stabilizing Zn‐metal anodes toward durable AZIBs.