YWYuchen Wu

Yuchen Wu

*This is an algorithmically generated author record based on publicly available information.

Yuchen Wu has a total of 429 co-authors. Here are the top co-authors by number of shared publications:

  • Lei Jiang

    State Key Laboratory of Bioinspired Interfacial Materials Science Bioinspired Science Innovation Center Hangzhou International Innovation Institute Beihang University Hangzhou China

    46 shared publications
  • Jiangang Feng

    41 shared publications
  • Hanfei Gao

    State Key Laboratory of Bioinspired Interfacial Materials Science, Suzhou Institute for Advanced Research, University of Science and Technology of China, Suzhou, Jiangsu 215123, P. R. China

    32 shared publications
  • Lei Jiang

    State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of Chemistry and International Center of Future Science Jilin University Changchun People's Republic of China

    31 shared publications
  • Hanfei Gao

    30 shared publications
  • Yingjie Zhao

    College of Chemistry and Pingyuan Laboratory

    18 shared publications

Latest Publications

  • Open Access

    Flexible circularly polarized light detection enabled by supramolecular chiral assembly within bulk heterojunctions

    by Wen Wang, Rui Li, Yilin Feng, Zhongyuan Wu, Yong Shu, Ying Chao Lai, Xiang Ao, Hanfei Gao, Yuchen Yue, Yuchen Qiu, et al.

    The development of flexible circularly polarized light (CPL) photodetectors is fundamentally challenged by the simultaneous requirement for strong chiroptical activity and efficient charge transport under mechanical deformation. Here, we report a supramolecular chiral induction combined with confined capillary‐bridge assembly to address this issue. Achiral PCDTPT is rendered optically active via non‐covalent interactions with chiral additives, achieving a high dissymmetry factor ( g ph, max = 0.4 at 850 nm) and broadband chiroptical activity of 300–1100 nm. The confined assembly not only stabilizes the induced helical order but also enables the formation of periodic bulk heterojunction arrays on flexible substrates. The resulting devices exhibit a low dark current (5.01 × 10 −9 A cm −2 ), high detectivity (2.18 × 10 12 Jones) and fast response (4.47 ms). The flexible polarized imaging chip exhibits robust mechanical durability, as demonstrated by its stable imaging under 30% strain. This work provides a versatile platform for flexible CPL detection and wearable polarization sensing.

  • Ice-mediated interfacial membrane synthesis of cargo-independent microcapsules

    by Hongzhong Du, Jiahui Wu, Kai Yang, Chuanbiao Zhang, Dan Wang, Xiaoting Chen, Siyuan Wang, Yuchen Wu, Shuo Jin, Xiaofei Chen, et al.


  • Open Access

    Spatially programmed polymorphic crystallization via microenvironment design

    by Zhenglian Qin, Yuchen Qiu, Jingyuan Zhang, Xiao Wei, Wen Wen, Tenglong Li, Huixue Su, Hanfei Gao, Jiangang Feng, Zhiyuan He, et al.

    Organic semiconductor crystals with long-range order and designable properties are pivotal in optoelectronic devices. Organic crystals bonded by weak intermolecular interactions usually follow non-classical crystallization trajectories, yielding polymorphs with distinctive properties but extremely difficult to control. We present a method for deterministic control of polymorphs, yielding organic microcrystal arrays with distinctive crystal structures and emission spectra. To elucidate the mechanisms of molecular self-assembly, we track the real-time dynamics of molecular nucleation, Ostwald’s ripening, and polymorph formation. Based on this method, we extended our regulation strategy to multiple molecules, achieving programmable polymorphic formation with broadly tunable emission spectra (450–705 nm) and anisotropic polarized emission. On a single substrate, we integrated multidimensional polymorphic information including position, wavelength, intensity, and polarization, constructing a high-density optical information storage platform with an information density of 2 15 bits/cm 2 , thereby opening potential technological pathways for future optical information storage technologies.

  • Enhanced Ultraviolet Circularly Polarized Light Detection through Tuning Constitutional Isomers in Chiral Benzo[ ghi ]perylenetriimides

    by Zhiwei Wang, Chao Zhang, Wenkai Zhao, Zibo Meng, Ke Gao, Zhuofan Wang, Jinhang Liu, Pei Zhou, Wei Qin, Guankui Long, et al.

    Chiral perylene diimides (PDIs) are promising candidates for circularly polarized light (CPL) detection due to their intrinsic chirality, outstanding photothermal stability and tunable molecular structures. However, the photocurrent dissymmetry factor ( g ph ) of CPL photodetectors based on chiral PDIs remains relatively low, limiting their applications in advanced chiral optoelectronics. In this work, two constitutional isomers of PDIs, ( S,S )‐BPTI‐ L ‐Ile and ( S,S )‐BPTI‐ L ‐Leu, were synthesized and self‐assembled into microcrystal arrays. ( S,S )‐BPTI‐ L ‐Ile microcrystal arrays had 7.1 × 10 −3 absorption dissymmetry factor ( g abs ), 2.4 times that of ( S,S )‐BPTI‐ L ‐Leu microcrystal arrays ( g abs = 2.9 × 10 −3 ). Theoretical calculations indicated that this difference originated from the distinct angle between the electric and magnetic transition dipole moments in the two microcrystal arrays. Meanwhile, the corresponding ( S,S )‐BPTI‐ L ‐Ile microcrystal arrays achieved record‐high g ph of 0.84 among chiral PDIs, which is consistent with higher spin polarization of 61%, nearly twice that of the ( S,S )‐BPTI‐ L ‐Leu microcrystal arrays (31%). Benefiting from its outstanding CPL detection capability and intrinsic device‐to‐device variability, ( S,S )‐BPTI‐ L ‐Ile microcrystal arrays were further applied to construct physical unclonable functions (PUFs) for secure information encryption. This work demonstrates the crucial role of constitutional isomers in regulating molecular packing, enhancing the detection capability of CPL, and highlights their potential for information security applications.

  • Adsorption Energy Difference‐Driven Synthesis of Perovskite Single Crystals With Tailored Exposed Facets

    by Yingjie Zhao, Jinjin Zhao, Xinzhang Lin, Jingyuan Zhang, Mengru Zhang, Meng Yuan, Kaixin Dong, Xiangxiang Yang, Ke He, Yuyan Zhao, et al.

    The precise synthesis of perovskite single crystals with tailored exposed facets is crucial for enhancing the performance of optoelectronic materials. However, the controlled preparation of perovskite single‐crystal with different exposed facets is challenging, because perovskite tends to grow thermodynamically stable crystal facets, hindering systematic investigations of facet‐dependent optoelectronic properties. Here, we first realized the synthesis of facet‐specific perovskite single crystals via a coordination competition strategy mediated by the crystal‐habit modifier, achieving morphological manipulation from cubic (100) to dodecahedral (110) facet‐dominant structures. The formation mechanism of non‐thermodynamic (110) facets originates from strong coordination between the crystal‐habit modifier and (110) facets, which selectively inhibits (110) facet growth and finally produces a (110) facet‐dominated single crystal. Optoelectronic characterization reveals distinct facet‐dependent properties, with (110) facets exhibiting higher defect density compared to (100) facets. Performance evaluations demonstrate that lower defect densities in (100) facets enhance photodetector performance, while the elevated defect densities in (110) facets improve photocatalytic performance. This study establishes a new paradigm for tailoring perovskite crystal facets and provides fundamental insights for designing high‐performance optoelectronic materials.

  • Adsorption Energy Difference‐Driven Synthesis of Perovskite Single Crystals With Tailored Exposed Facets

    by Yingjie Zhao, Jinjin Zhao, Xinzhang Lin, Jingyuan Zhang, Mengru Zhang, Meng Yuan, Kaixin Dong, Xiangxiang Yang, Ke He, Yuyan Zhao, et al.

    The precise synthesis of perovskite single crystals with tailored exposed facets is crucial for enhancing the performance of optoelectronic materials. However, the controlled preparation of perovskite single‐crystal with different exposed facets is challenging, because perovskite tends to grow thermodynamically stable crystal facets, hindering systematic investigations of facet‐dependent optoelectronic properties. Here, we first realized the synthesis of facet‐specific perovskite single crystals via a coordination competition strategy mediated by the crystal‐habit modifier, achieving morphological manipulation from cubic (100) to dodecahedral (110) facet‐dominant structures. The formation mechanism of non‐thermodynamic (110) facets originates from strong coordination between the crystal‐habit modifier and (110) facets, which selectively inhibits (110) facet growth and finally produces a (110) facet‐dominated single crystal. Optoelectronic characterization reveals distinct facet‐dependent properties, with (110) facets exhibiting higher defect density compared to (100) facets. Performance evaluations demonstrate that lower defect densities in (100) facets enhance photodetector performance, while the elevated defect densities in (110) facets improve photocatalytic performance. This study establishes a new paradigm for tailoring perovskite crystal facets and provides fundamental insights for designing high‐performance optoelectronic materials.


  • Self-assembly of Janus microring from phase-segregated colloidal quantum dots for dual-wavelength laser

    by Yuyan Zhao, Jie Zhao, Jiangang Feng, Fengmian Li, Hui Li, Hanfei Gao, Zhiyuan He, Chuang Zhang, Yuchen Wu, Lei Jiang

  • Open Access

    High-performance topochemical polymerization-based photo-carving with sub-50 nm resolution utilizing visible light

    by Yangyang Ren, Zhenglian Qin, Yuchao Li, Yanan Zhao, Yanjun Gong, Huixian Liu, Jie Zhang, Yanke Che, Jincai Zhao, Yuchen Wu, et al.

    Photosensitive topochemical polymerization, characterized by lattice-controlled reaction sites and rates, enables the production of highly crystalline and isotactic polymers, providing a powerful synthesis route for advancing high-performance lithographic technologies. However, the substantial challenge of achieving precise molecular packing and fabricating large-area single-crystal thin films required by topochemical reactions remains a major obstacle to realizing sub-diffraction, low-power lithographic technologies. In this study, we report a lattice-induced resolution enhancement method that exceeds the diffraction limit, in synergy with a dual solid-liquid interface confinement strategy, enabling efficient topochemical polymerization in both 2D and 3D lithographic applications. The directed fluid flow within the confined space effectively suppresses uncontrolled nucleation, facilitating the fabrication of large-area single-crystal thin-film photoresists with tunable thickness and aspect ratios. We demonstrate dual-mode photocarving on large-area photoresists at sub-50 nm resolution ( λ /10) using a low-power continuous-wave visible laser (4-20 μW), which operates at power levels several orders of magnitude lower than those required for two-photon lithography. The entire process is compatible with standard commercial optical microscopes using standard optical components. Our research introduces a versatile platform for achieving subdiffractional lithographic resolution with low-power light, demonstrating a fivefold enhancement in resolution under identical illumination conditions compared to reported photoresists.

  • Temperature Field‐Driven Directional Space‐Confined Crystallization of Perovskite Melt Toward High‐Performance Optoelectronic Devices

    by Yi Hao, Kaixin Dong, Xinzhang Lin, Junjie Liu, Zhonghao Wei, Jinjin Zhao, Jingyuan Zhang, Xiangxiang Yang, Dan Li, Jingcheng Hu, et al.

    The development of optoelectronic devices relies heavily on the advancement of semiconductor materials and microfabrication technologies. Notably, metal halide perovskites with superior optoelectronic properties show great prospects for optical sensing technology. However, the current processing techniques of perovskite materials are mainly solution methods and vapor‐phase methods, facing toxic solvents and material waste, which are harmful to the natural environment and human health. Herein, we originally developed the temperature field‐driven directional space‐confined melt crystallization strategy, which perfectly solved the problems of toxic solvent and material waste, yielding highly crystalline, purely oriented 2D perovskite single‐crystal films. Long‐range‐oriented single‐crystal films with fewer crystal domains and defects ensure that optical synaptic devices possess image encryption and high‐fidelity polarization imaging capabilities. Furthermore, the melt processing technique enables the fabrication of high‐quality 2D‐3D perovskite heterojunctions, which notably improve the photodetector performance of 2D perovskite. This pioneering work provides a new strategy and opportunity for the environmentally friendly, high‐throughput integration of perovskite optoelectronic devices.

  • Chiral π-conjugated polymer films via kinetically controlled dip-coating for circularly polarized light information encoding

    by Haitao Cheng, Ke Gao, Chao Zhang, Haoze Li, Jingrun Yang, Zibo Meng, Liang Jiang, Xiaobo Shang, Yuchen Wu, Hanfei Gao

    Continuous, smooth chiral polymer films fabricated by a kinetically controlled dip-coating method achieve high-performance circularly polarized light detection, demonstrating binary logic information encoding and decoding.