CBCarlos Baptista

Carlos Baptista

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carlos Baptista has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • E12 technique: Conventional epoxy resin sheet plastination

    by Rafael Latorre, Kees de Jong, Mircea‐Constantin Sora, Octavio López‐Albors, Carlos Baptista

    Epoxy plastination techniques were developed to obtain thin transparent body slices with high anatomical detail. This is facilitated because the plastinated tissue is transparent and the topography of the anatomical structures well preserved. For this reason, thin epoxy slices are currently used for research purposes in both macroscopic and microscopic studies. The protocol for the conventional epoxy technique (E12) follows the main steps of plastination—specimen preparation, dehydration, impregnation and curing/casting. Preparation begins with selection of the specimen, followed by freezing and slicing. Either fresh or fixed (embalmed) tissue is suitable for epoxy plastination, while slice thickness is kept between 1.5 and 3 mm. Impregnation mixture is made of epoxy E12 resin plus E1 hardener (100 ppw; 28 ppw). This mixture is reactive and temperature sensitive, and for this reason, total impregnation time under vacuum at room laboratory temperature should not last for more than 20–24 hr. Casting of impregnated slices is done in either flat chambers or by the so‐called sandwich method in either fresh mixture or the one used for impregnation. Curing is completed at 40°C to allow a complete polymerization of the epoxy‐mixture. After curing, slices can be photographed, scanned or used for anatomical study under screen negatoscope, magnification glass or fluorescent microscope. Based on epoxy sheet plastination, many anatomical papers have recent observations of and/or clarification of anatomical concepts in different areas of medical expertice.


  • Top Cited Papers

    Plastination—A scientific method for teaching and research

    by Mircea‐Constantin Sora, Rafael Latorre, Carlos Baptista, Octavio López-Albors

    Over the last four decades, plastination has been one of the best processes of preservation for organic tissue. In this process, water and lipids in biological tissues are replaced by polymers (silicone, epoxy, polyester) which are hardened, resulting in dry, odourless and durable specimens. Nowadays, after more than 40 years of its development, plastination is applied in more than 400 departments of anatomy, pathology, forensic sciences and biology all over the world. The most known polymers used in plastination are silicone (S10), epoxy (E12) and polyester (P40). The key element in plastination is the impregnation stage, and therefore depending on the polymer that is used, the optical quality of specimens differs. The S10 silicone technique is the most common technique used in plastination. Specimens can be used, especially in teaching, as they are easy to handle and display a realistic topography. Plastinated silicone specimens are used for displaying whole bodies, or body parts for exhibition. Transparent tissue sections, with a thickness between 1 and 4 mm, are usually produced by using epoxy (E12) or polyester (P40) polymer. These sections can be used to study both macroscopic and microscopic structures. Compared with the usual methods of dissection or corrosion, plastinated slices have the advantage of not destroying or altering the spatial relationships of structures. Plastination can be used as a teaching and research tool. Besides the teaching and scientific sector, plastination becomes a common resource for exhibitions, as worldwide more and more exhibitions use plastinated specimens.


  • P40 polyester sheet plastination technique for brain and body slices: The vertical and horizontal flat chamber methods

    by Carlos A. C. Baptista, Kees DeJong, Rafael Latorre, Athelson S. Bittencourt

    The P40 technique produces high‐quality brain and body slices and is the user‐friendliest of the polyester techniques. The P40 polyester technique follows the same classical steps for plastination. That is, preparation of the specimen, fixation (optional), dehydration by freeze substitution, forced impregnation and curing. Two methods used to prepare two different types of specimens, that is, brain slices and body slices are described. Each method has its own characteristics depending on the specimen type used. Brain slices were used to illustrate the vertical small chamber method while the body slices were used to illustrate the horizontal large chamber method. The brain slices obtained using P40 are of very good quality presenting good contrast between grey and white matter. The body slices are also of very good quality. The physical appearance of these slices makes them an exceptional instrument for diagnostic imaging and anatomical correlation. Body slices prepared with P40 retain the natural colour of the tissue and preserve the anatomical relationships.


  • The International Society for Plastination

    by Rafael Latorre, Robert Henry, Philip J. Adds, Carlos Baptista

    The International Society for Plastination (ISP) was conceived as a means of defining plastination as an area of professional activity and serving as an agency for disseminating information relative to the art and science of plastination. In this paper, we present the purpose of ISP, the Journal of Plastination, the Plastination Index and the different international meetings organised by ISP.


  • Open Access

    A new technique of human body embalming and preservation at room temperature and dry storage

    by Telma Sumie Masuko, Lucas dos Santos Andrade, Nicolás Ernesto Ottone, Carlos Augusto Camargo Baptista, Mirna Duarte Barros

    Introduction: The study of the anatomy inevitably requires the use of real human cadaver, for its dissection, prosection and research. The support with technological methods, such as virtual dissection tables, three‐dimensional animation programs or the implementation of 3D printers are very useful to complement the study of the anatomy in the corpse, but they will never replace it. During the last years, a large number of variants of fixation and preservation liquids have been proposed with reduced formalin levels, due to their toxicity and the complication in the handling involved in their use and also in seeking alternative methods to preserve the body in the most similar way to the fresh cadaver, from its morphology, texture and mobility. Objective: Present a new formula of fixation and conservation that allows the body to be preserved with its morphological and mobility characteristics similar to the fresh cadaver, but ensuring its fixation and conservation over time, maintaining at room temperature. Material and Methods: We use a 69 years old female body donated, was embalmed using a new solution based on Baptista et al (1986) with embalming pump. We cut the hair and pubic hair, washed the cadaver with germicide solution (attention to pubic, axillae and neck areas). The formula used was: alcohol 1000 ml; phenol 1000 ml; glycerin 1000 ml; sodium nitrate 1000 ml; formaldehyde 2000 ml; distilled water 14000 ml. Due to the difficulty of diffusion of the solution in this specific cadaver, it was necessary to make several accesses (right and left femoral, common carotids and axillaries arteries) and complementary injections of formaldehyde at 20% in muscles of arms and legs and a bilateral access by infraorbital area to reach the cranial cavity. After injection, the cadaver was maintained at room temperature (without air conditioning), ranged between 20.1 – 32.1 °C (68.1 – 89.8 °F) and the humidity (45 – 94) in a body bag and covered with blackout sheet. We collected samples from four different tissues, after 130 days and after 150 days post embalming: 1. skin and subcutaneous (next to right costal margin); 2. Rectus abdominismuscle; 3. Liver (quadrate lobe); and 4. Transverse colon. The samples were fixed in formaldehyde at 20% and submitted to histological HE staining. Results: This method resulted in soft and flexible cadavers with almost natural colours (Figs. 1, 2). The histological analysis indicated the preservation of tissue and cellular structure in the different samples examined, even after 150 days of fixation (Figs. 3, 4, 5, 6). Conclusion: The cadaver preservation technique presented is inexpensive, easy to perform and effective in maintaining the morphological characteristics of the anatomical specimen for an extended period of time. It presents, therefore, as an alternative to the centers of education and research in anatomy that need to deal with the toxicity of the fixing products and with the costs of obtaining and maintaining anatomical specimens. This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .