Shaoxiang Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Shaoxiang Li has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Jiaji Cheng
College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, People’s Republic of China
5 shared publications Dong Wang
College of Environment and Safety Engineering Qingdao University of Science and Technology Qingdao China
4 shared publicationsFeng Zhang
College of Environment and Safety Engineering Qingdao University of Science and Technology Qingdao China
4 shared publicationsYue Zhou
College of Environment and Safety Engineering Qingdao University of Science and Technology Qingdao China
4 shared publicationsWenjuan Qu
College of Environment and Safety Engineering Qingdao University of Science and Technology Qingdao China
3 shared publicationsYong Wang
College of Environment and Safety Engineering Qingdao University of Science and Technology Qingdao 266042 China
3 shared publications
Latest Publications
- 2 July 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (48)
Effects of ammonium polyphosphate microencapsulated on flame retardant and mechanical properties of the rigid polyurethane foam
In this article, a flame retardant microcapsule ammonium polyphosphate microencapsulated by polyurea (POAPP) was successfully synthesized by interfacial polymerization method using ammonium polyphosphate (APP) as core and polyurea as shell. The microencapsulation is observed by scanning electron microscopy and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis and hydroscopicity test, which prove the success in synthesizing microencapsulation. When the POAPP is added into rigid polyurethane foam (RPUF), the flame retardant and mechanical properties are investigated using cone calorimeter, limited oxygen index test, and compressive strength test. The PHRR of RPUF‐POAPP20 decreased from 336.52 kW/m2 (Ref. RPUF) to 203.84 kW/m2 and the THR of RPUF‐POAPP20 was only 7.6 MJ/m2, which is 33.9% lower than that of Ref. RPUF. Furthermore, the limiting oxygen index of RPUF‐POAPP20 reaches 24.8%, which increased by 36.3% compared to Ref. RPUF. Whereas the maximum compressive strength of RPUF‐POAPP5 was 7.46 MPa, which is higher than that of RPUF‐APP5.
- 2 July 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (48)
Effects of ammonium polyphosphate microencapsulated on flame retardant and mechanical properties of the rigid polyurethane foam
In this article, a flame retardant microcapsule ammonium polyphosphate microencapsulated by polyurea (POAPP) was successfully synthesized by interfacial polymerization method using ammonium polyphosphate (APP) as core and polyurea as shell. The microencapsulation is observed by scanning electron microscopy and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis and hydroscopicity test, which prove the success in synthesizing microencapsulation. When the POAPP is added into rigid polyurethane foam (RPUF), the flame retardant and mechanical properties are investigated using cone calorimeter, limited oxygen index test, and compressive strength test. The PHRR of RPUF‐POAPP20 decreased from 336.52 kW/m2 (Ref. RPUF) to 203.84 kW/m2 and the THR of RPUF‐POAPP20 was only 7.6 MJ/m2, which is 33.9% lower than that of Ref. RPUF. Furthermore, the limiting oxygen index of RPUF‐POAPP20 reaches 24.8%, which increased by 36.3% compared to Ref. RPUF. Whereas the maximum compressive strength of RPUF‐POAPP5 was 7.46 MPa, which is higher than that of RPUF‐APP5.
- Open Access
- 29 June 2020
- Published by Frontiers Media SA in Frontiers in Neurorobotics
- Vol. 14, 30
An Enhanced Robot Massage System in Smart Homes Using Force Sensing and a Dynamic Movement Primitive
With requirements to improve life quality, smart homes, and healthcare have gradually become a future lifestyle. In particular, service robots with human behavioral sensing for private or personal use in the home have attracted a lot of research attention thanks to their advantages in relieving high labor costs and the fatigue of human assistance. In this paper, a novel force-sensing- and robotic learning algorithm-based teaching interface for robot massaging has been proposed. For the teaching purposes, a human operator physically holds the end-effector of the robot to perform the demonstration. At this stage, the end position data are outputted and sent to be segmented via the Finite Difference (FD) method. A Dynamic Movement Primitive (DMP) is utilized to model and generalize the human-like movements. In order to learn from multiple demonstrations, Dynamic Time Warping (DTW) is used for the preprocessing of the data recorded on the robot platform, and a Gaussian Mixture Model (GMM) is employed for the evaluation of DMP to generate multiple patterns after the completion of the teaching process. After that, a Gaussian Mixture Regression (GMR) algorithm is applied to generate a synthesized trajectory to minimize position errors. Then a hybrid position/force controller is integrated to track the desired trajectory in the task space while considering the safety of human-robot interaction. The validation of our proposed method has been performed and proved by conducting massage tasks on a KUKA LBR iiwa robot platform.
- 29 June 2020
- Published by Frontiers Media SA in Frontiers in Neurorobotics
- Vol. 14, 30
Open AccessAn Enhanced Robot Massage System in Smart Homes Using Force Sensing and a Dynamic Movement Primitive
With requirements to improve life quality, smart homes, and healthcare have gradually become a future lifestyle. In particular, service robots with human behavioral sensing for private or personal use in the home have attracted a lot of research attention thanks to their advantages in relieving high labor costs and the fatigue of human assistance. In this paper, a novel force-sensing- and robotic learning algorithm-based teaching interface for robot massaging has been proposed. For the teaching purposes, a human operator physically holds the end-effector of the robot to perform the demonstration. At this stage, the end position data are outputted and sent to be segmented via the Finite Difference (FD) method. A Dynamic Movement Primitive (DMP) is utilized to model and generalize the human-like movements. In order to learn from multiple demonstrations, Dynamic Time Warping (DTW) is used for the preprocessing of the data recorded on the robot platform, and a Gaussian Mixture Model (GMM) is employed for the evaluation of DMP to generate multiple patterns after the completion of the teaching process. After that, a Gaussian Mixture Regression (GMR) algorithm is applied to generate a synthesized trajectory to minimize position errors. Then a hybrid position/force controller is integrated to track the desired trajectory in the task space while considering the safety of human-robot interaction. The validation of our proposed method has been performed and proved by conducting massage tasks on a KUKA LBR iiwa robot platform.
- 21 April 2020
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 145 (1) , 173-184
Flame retardant effect of 1-aminoethyl-3-methylimidazolium hexafluorophosphate in thermoplastic polyurethane elastomer
- 21 April 2020
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 145 (1) , 173-184
Flame retardant effect of 1-aminoethyl-3-methylimidazolium hexafluorophosphate in thermoplastic polyurethane elastomer
- Open Access
Preparation of Zeolitic Imidazolate Frameworks and Their Application as Flame Retardant and Smoke Suppression Agent for Rigid Polyurethane Foams
In order to reduce the fire risk of rigid polyurethane foams (RPUF), three kinds of zeolitic imidazolate frameworks (ZIFs) were prepared. The results of Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM and X-ray diffraction (XRD) showed that ZIFs were successfully prepared. The combustion test results showed that the heat and smoke production of the composite containing ZIFs was obviously reduced. In particular, the peak heat release rate (PHRR) of ZIF-8/RPUF decreased from 740.85 kW/m2 (Ref. RPUF) to 489.56 kW/m2, while the PHRR of ZIF-7/RPUF and ZIF-11/RPUF is 598.39 and 583.36 kW/m2, respectively. The addition of ZIFs improved the thermostability of the composite. The T50% of ZIF-8/RPUF, ZIF-7/RPUF and ZIF-11/RPUF increased to 364, 382 and 380 °C, respectively. The maximum light absorption of ZIF-7/RPUF and ZIF-11/RPUF was about 88%, which is higher than that of ZIF-8/RPUF (75%). The results of Raman spectroscopy showed that the ID/IG value of Ref. RPUF is 2.96, while the ID/IG value of ZIFs/RPUF reduces to less than 2.80. The main mechanism of ZIFs for reducing the fire risk of RPUF was the catalysis and incarbonization of ZIFs during combustion based on the results of thermogravimetric analysis and Raman spectroscopy of char residue.
Open AccessPreparation of Zeolitic Imidazolate Frameworks and Their Application as Flame Retardant and Smoke Suppression Agent for Rigid Polyurethane Foams
In order to reduce the fire risk of rigid polyurethane foams (RPUF), three kinds of zeolitic imidazolate frameworks (ZIFs) were prepared. The results of Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM and X-ray diffraction (XRD) showed that ZIFs were successfully prepared. The combustion test results showed that the heat and smoke production of the composite containing ZIFs was obviously reduced. In particular, the peak heat release rate (PHRR) of ZIF-8/RPUF decreased from 740.85 kW/m2 (Ref. RPUF) to 489.56 kW/m2, while the PHRR of ZIF-7/RPUF and ZIF-11/RPUF is 598.39 and 583.36 kW/m2, respectively. The addition of ZIFs improved the thermostability of the composite. The T50% of ZIF-8/RPUF, ZIF-7/RPUF and ZIF-11/RPUF increased to 364, 382 and 380 °C, respectively. The maximum light absorption of ZIF-7/RPUF and ZIF-11/RPUF was about 88%, which is higher than that of ZIF-8/RPUF (75%). The results of Raman spectroscopy showed that the ID/IG value of Ref. RPUF is 2.96, while the ID/IG value of ZIFs/RPUF reduces to less than 2.80. The main mechanism of ZIFs for reducing the fire risk of RPUF was the catalysis and incarbonization of ZIFs during combustion based on the results of thermogravimetric analysis and Raman spectroscopy of char residue.
- 13 August 2019
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 30 (12) , 3091-3098
Effects of flame‐retardant ramie fiber on enhancing performance of the rigid polyurethane foams
Ramie fiber (RF) with excellent tensile strength was treated by a flame retardant and obtained the modified RF (MRF) that is incombustible. Then, MRF was used to improve the performance of rigid polyurethane foams (RPUF). The mechanical properties of the composite were investigated by compressive strength test and shear stress test. The fire characteristics were studied using a cone calorimeter. And the thermal decomposition and flammable properties were further evaluated using thermogravimetric analysis and limiting oxygen index. The results showed that MRF improve the mechanical properties of RPUF and eliminate the harm of flammability of RF on the RPUF.
- 13 August 2019
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 30 (12) , 3091-3098
Effects of flame‐retardant ramie fiber on enhancing performance of the rigid polyurethane foams
Ramie fiber (RF) with excellent tensile strength was treated by a flame retardant and obtained the modified RF (MRF) that is incombustible. Then, MRF was used to improve the performance of rigid polyurethane foams (RPUF). The mechanical properties of the composite were investigated by compressive strength test and shear stress test. The fire characteristics were studied using a cone calorimeter. And the thermal decomposition and flammable properties were further evaluated using thermogravimetric analysis and limiting oxygen index. The results showed that MRF improve the mechanical properties of RPUF and eliminate the harm of flammability of RF on the RPUF.
- 29 July 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (4) , 48307
Mechanical property improvement and fire hazard reduction of ammonium polyphosphate microencapsulated in rigid polyurethane foam
Ammonium polyphosphate (APP) is an effective phosphorus‐containing flame retardant. But APP also has excellent hygroscopic capacity and decreases the mechanical property of composite. The aim of the study was to microencapsulate APP with polymethyl methacrylate (PMMA) to prepare microencapsulated ammonium polyphosphate (PMAPP) in order to eliminate the harmful effects caused by the mechanical property of composite. The microcapsules are characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and hydroscopicity test and observed by scanning electron microscopy (SEM). Fire hazard of rigid polyurethane foam (RPUF) is evaluated using a cone calorimeter and limited oxygen index test. The mechanical property of RPUF is studied by compressive strength test. The results show that APP has been microencapsulated by PMMA successfully and the shell does not decrease the beneficial effect of APP on fire hazard of RPUF. Furthermore, the shell also reduces the damage of APP on the mechanical property of composite. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48307.
- 29 July 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (4) , 48307
Mechanical property improvement and fire hazard reduction of ammonium polyphosphate microencapsulated in rigid polyurethane foam
Ammonium polyphosphate (APP) is an effective phosphorus‐containing flame retardant. But APP also has excellent hygroscopic capacity and decreases the mechanical property of composite. The aim of the study was to microencapsulate APP with polymethyl methacrylate (PMMA) to prepare microencapsulated ammonium polyphosphate (PMAPP) in order to eliminate the harmful effects caused by the mechanical property of composite. The microcapsules are characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and hydroscopicity test and observed by scanning electron microscopy (SEM). Fire hazard of rigid polyurethane foam (RPUF) is evaluated using a cone calorimeter and limited oxygen index test. The mechanical property of RPUF is studied by compressive strength test. The results show that APP has been microencapsulated by PMMA successfully and the shell does not decrease the beneficial effect of APP on fire hazard of RPUF. Furthermore, the shell also reduces the damage of APP on the mechanical property of composite. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48307.
- 28 March 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (28)
Effects of the recycled poly(ethylene terephthalate) fibers on the rigid polyurethane foam
Recycled poly(ethylene terephthalate) (PET), subjected to the treatment with the flame retardant first, was used to reinforce the rigid polyurethane foams (RPUFs). Different loadings of PET fibers (3–12 wt %) of different lengths (5, 10, 15, and 20 mm) were added into RPUF. The mechanical properties of composites were studied by compressive strength test and shear stress test. The flame‐retardant properties were evaluated by cone calorimeter and limited oxygen index test. The results showed that the proper addition of PET fibers could improve the mechanical and flame‐retardant properties of the material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 47758.
- 28 March 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (28)
Effects of the recycled poly(ethylene terephthalate) fibers on the rigid polyurethane foam
Recycled poly(ethylene terephthalate) (PET), subjected to the treatment with the flame retardant first, was used to reinforce the rigid polyurethane foams (RPUFs). Different loadings of PET fibers (3–12 wt %) of different lengths (5, 10, 15, and 20 mm) were added into RPUF. The mechanical properties of composites were studied by compressive strength test and shear stress test. The flame‐retardant properties were evaluated by cone calorimeter and limited oxygen index test. The results showed that the proper addition of PET fibers could improve the mechanical and flame‐retardant properties of the material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 47758.
- Open Access
- 3 February 2019
- Published by Egyptian Knowledge Bank in Journal of Sustainable Agricultural Sciences
Influence of Maize Genotypes on Wheat Haploid Embryos Production in Maize Mediated Cross System
Six selected bread wheat double haploid genotypes and eight maize cultivars belonging to four types were used in this study. The six wheat genotypes pollinated with the eight maize cultivars to study the effects of different maize genotypes of distinct types on the wheat haploid embryo ratio. The results showed that the same wheat material when pollinated with different maize cultivar, the embryo rate differed between 1.5 to 3 times and ranging from 15.43% to 47.80%. The average haploid embryo induction rate was highest in sweet type (33.24%) and lowest in super sweet type (29.59%). The wheat genotype A6 recorded the highest embryo rate percentage (34.11%), while A5 recorded the lowest rate (29.36%). The white Sweet Waxy (B4) found to be the highest for embryo rate, followed by the Cloud Sweet Jade 6th (B5) and Jane wo Waxy 1th (B1), while the lowest was recorded by Cloud Super Sweet 2nd (B8) cultivar. The maize genotypes in the same type differed significantly regarding the haploid embryo induction rate of wheat genotypes and thus maize types were not consistent in their behavior. So, the key was to select maize genotypes and not the maize type. The interaction between wheat genotype and maize genotype has a significant effect on the embryogenesis rate. Therefore, if the rate of embryo induction of some wheat materials with a common maize variety is low, it may be possible using the pollination of other maize cultivars to increase the embryogenesis in wheat x maize hybridization.
- 3 February 2019
- Published by Egyptian Knowledge Bank in Journal of Sustainable Agricultural Sciences
Open AccessInfluence of Maize Genotypes on Wheat Haploid Embryos Production in Maize Mediated Cross System
Six selected bread wheat double haploid genotypes and eight maize cultivars belonging to four types were used in this study. The six wheat genotypes pollinated with the eight maize cultivars to study the effects of different maize genotypes of distinct types on the wheat haploid embryo ratio. The results showed that the same wheat material when pollinated with different maize cultivar, the embryo rate differed between 1.5 to 3 times and ranging from 15.43% to 47.80%. The average haploid embryo induction rate was highest in sweet type (33.24%) and lowest in super sweet type (29.59%). The wheat genotype A6 recorded the highest embryo rate percentage (34.11%), while A5 recorded the lowest rate (29.36%). The white Sweet Waxy (B4) found to be the highest for embryo rate, followed by the Cloud Sweet Jade 6th (B5) and Jane wo Waxy 1th (B1), while the lowest was recorded by Cloud Super Sweet 2nd (B8) cultivar. The maize genotypes in the same type differed significantly regarding the haploid embryo induction rate of wheat genotypes and thus maize types were not consistent in their behavior. So, the key was to select maize genotypes and not the maize type. The interaction between wheat genotype and maize genotype has a significant effect on the embryogenesis rate. Therefore, if the rate of embryo induction of some wheat materials with a common maize variety is low, it may be possible using the pollination of other maize cultivars to increase the embryogenesis in wheat x maize hybridization.
- 13 January 2018
- Published by Springer Nature
- p. 223-236
Numerical Simulation of Turbulence Flow and Solidification in a Bloom Continuous Casting Mould with Electromagnetic Stirring
- 13 January 2018
- Published by Springer Nature
- p. 223-236
Numerical Simulation of Turbulence Flow and Solidification in a Bloom Continuous Casting Mould with Electromagnetic Stirring
- 29 August 2007
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section E Structure Reports Online
- Vol. 63 (9) , m2437
Dibromidotetrakis(1-vinyl-1H-imidazole-κN3)copper(II)
- 29 August 2007
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section E Structure Reports Online
- Vol. 63 (9) , m2437
Dibromidotetrakis(1-vinyl-1H-imidazole-κN3)copper(II)