Wenjihao Hu
Wenjihao Hu has a total of 117 co-authors. Here are the top co-authors by number of shared publications:
- Hongbo Zeng
Department of Chemical and Materials Engineering University of Alberta Edmonton Alberta Canada
15 shared publications Lu Gong
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB, T6G 1H9, Canada
11 shared publicationsLi Xiang
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
8 shared publicationsLing Zhang
Zhongyuan Critical Metals Laboratory
8 shared publications- Feipeng Jiao
School of Chemistry and Chemical Engineering, Central South University, Changsha 410083, People's Republic of China
6 shared publications Jingang Yu
6 shared publications
Latest Publications
- 21 September 2026
- Published by Elsevier in Minerals Engineering
- Vol. 250
Atomic force microscopy insights into Pb2⁺-Mediated benzohydroxamic acid adsorption and bubble attachment on cassiterite surfaces
- 21 September 2026
- Published by Elsevier in Minerals Engineering
- Vol. 250
Atomic force microscopy insights into Pb2⁺-Mediated benzohydroxamic acid adsorption and bubble attachment on cassiterite surfaces
- 23 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
Ionic Liquid-Laden Mesoporous Silica for Ultrafast Gold Recovery Via Nanoconfined Interfacial Anion Exchange
Recovery of Au from electronic waste is fundamentally a physicochemical problem of selective ion transfer across liquid interfaces under strongly acidic, multicomponent conditions. Although water-immiscible ionic liquids can exchange their resident anion counterions with AuCl4-, their practical use is kinetically limited by slow interfacial transfer and sluggish diffusion within the highly viscous ionic-liquid phase. Here, we report ionic liquid-laden mesoporous silica particles (IL-MS) as a nanoconfined ion-exchange platform that couples favorable chlorometalate/ionic-liquid interactions with shortened diffusion paths and enlarged aqueous/ionic-liquid interfacial area. This mesopore-confined architecture enables complete capture of AuCl4- from water within less than 10 s, with an equilibrium uptake corresponding to a 1:1 molar ratio with the resident anion Cl- counterions. The practical applicability of IL-MS was further demonstrated using real waste printed circuit board leachate, from which Au was selectively recovered and converted into metallic Au with a purity of 99.6%. These results establish nanoconfined interfacial anion exchange as an efficient strategy for rapid and selective Au recovery from complex e-waste-derived streams.
- 23 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
Ionic Liquid-Laden Mesoporous Silica for Ultrafast Gold Recovery Via Nanoconfined Interfacial Anion Exchange
Recovery of Au from electronic waste is fundamentally a physicochemical problem of selective ion transfer across liquid interfaces under strongly acidic, multicomponent conditions. Although water-immiscible ionic liquids can exchange their resident anion counterions with AuCl4-, their practical use is kinetically limited by slow interfacial transfer and sluggish diffusion within the highly viscous ionic-liquid phase. Here, we report ionic liquid-laden mesoporous silica particles (IL-MS) as a nanoconfined ion-exchange platform that couples favorable chlorometalate/ionic-liquid interactions with shortened diffusion paths and enlarged aqueous/ionic-liquid interfacial area. This mesopore-confined architecture enables complete capture of AuCl4- from water within less than 10 s, with an equilibrium uptake corresponding to a 1:1 molar ratio with the resident anion Cl- counterions. The practical applicability of IL-MS was further demonstrated using real waste printed circuit board leachate, from which Au was selectively recovered and converted into metallic Au with a purity of 99.6%. These results establish nanoconfined interfacial anion exchange as an efficient strategy for rapid and selective Au recovery from complex e-waste-derived streams.
- 1 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (11) , 8845-8859
Regulation of the Permeation Performance of MoS 2 -Based Two-Dimensional Membranes via Systematic Surface Modification
- 1 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (11) , 8845-8859
Regulation of the Permeation Performance of MoS 2 -Based Two-Dimensional Membranes via Systematic Surface Modification
- Top Cited Papers
- 11 January 2026
- Published by Elsevier in Environmental Research
- Vol. 293, 123751
Phosphate-modified attapulgite for efficient Pb(II) and Cd(II) removal: surface functionalization and adsorption mechanisms
- 11 January 2026
- Published by Elsevier in Environmental Research
- Vol. 293, 123751
Top Cited PapersPhosphate-modified attapulgite for efficient Pb(II) and Cd(II) removal: surface functionalization and adsorption mechanisms
- 4 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (10) , 13202-13211
Probing the Interaction Mechanism of Sodium Oleate and Dodecyl Amine with Quartz Surfaces in the Presence of Ca2+ Ions by AFM Force Measurement
Quartz is a key raw material in high-tech fields (such as photovoltaics and semiconductor microelectronics), and the most efficient extraction method of quartz is mineral flotation. Quartz activation plays a crucial role in mineral flotation. However, the mechanism underlying the process remains unclear, and the role of additional metal ions is controversial. In this study, the interaction forces between the quartz surface, the dodecylamine (DDA) cation/sodium oleate (NaOL) anion mixed collectors, and Ca2+ were analyzed using atomic force microscopy in order to systematically explore the activation process of quartz flotation. The results confirmed that the activation process was initialized from NaOL, which was adsorbed on the surface of a calcium-covered quartz surface. The existence of DDA inhibited the binding of Ca2+ to NaOL so that more Ca2+ was adsorbed on the quartz surface to provide the adsorption site for NaOL. Moreover, the best adsorption condition of Ca2+ + NaOL + DDA mixed solution was analyzed by quartz crystal microbalance with dissipation, and it demonstrated that the most stable chemisorption environment on the quartz surface was at pH 11.0. In these circumstances, Ca2+ could first adsorb in a point-like manner on the quartz surface, which was then adsorbed with a mixture of NaOL and DDA. This result showed that, at a specific pH, Ca2+ could encourage the coadsorption of cationic/anionic mixed collectors on quartz. This work provides an important new understanding of the intermolecular interactions that take place during complex mineral flotation processes between chemical additives and mineral surfaces. The methodology used in this study can be easily adapted to different interfacial processes, including water treatment, membrane technology, bioengineering, and oil production.
- 4 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (10) , 13202-13211
Probing the Interaction Mechanism of Sodium Oleate and Dodecyl Amine with Quartz Surfaces in the Presence of Ca2+ Ions by AFM Force Measurement
Quartz is a key raw material in high-tech fields (such as photovoltaics and semiconductor microelectronics), and the most efficient extraction method of quartz is mineral flotation. Quartz activation plays a crucial role in mineral flotation. However, the mechanism underlying the process remains unclear, and the role of additional metal ions is controversial. In this study, the interaction forces between the quartz surface, the dodecylamine (DDA) cation/sodium oleate (NaOL) anion mixed collectors, and Ca2+ were analyzed using atomic force microscopy in order to systematically explore the activation process of quartz flotation. The results confirmed that the activation process was initialized from NaOL, which was adsorbed on the surface of a calcium-covered quartz surface. The existence of DDA inhibited the binding of Ca2+ to NaOL so that more Ca2+ was adsorbed on the quartz surface to provide the adsorption site for NaOL. Moreover, the best adsorption condition of Ca2+ + NaOL + DDA mixed solution was analyzed by quartz crystal microbalance with dissipation, and it demonstrated that the most stable chemisorption environment on the quartz surface was at pH 11.0. In these circumstances, Ca2+ could first adsorb in a point-like manner on the quartz surface, which was then adsorbed with a mixture of NaOL and DDA. This result showed that, at a specific pH, Ca2+ could encourage the coadsorption of cationic/anionic mixed collectors on quartz. This work provides an important new understanding of the intermolecular interactions that take place during complex mineral flotation processes between chemical additives and mineral surfaces. The methodology used in this study can be easily adapted to different interfacial processes, including water treatment, membrane technology, bioengineering, and oil production.
- 7 January 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (8) , 4200-4208
Demystifying constructive strategies on designing functionalized lamellar Nb2CTx nanosheet membrane architectures under confined space
Functionalized lamellar Nb2CTx nanosheet membranes for enhanced water permeation and ion rejection as well as selective separation of Li+/Mg2+ ions are achieved via tuning the interactions of ions and water within a confined space.
- 7 January 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (8) , 4200-4208
Demystifying constructive strategies on designing functionalized lamellar Nb2CTx nanosheet membrane architectures under confined space
Functionalized lamellar Nb2CTx nanosheet membranes for enhanced water permeation and ion rejection as well as selective separation of Li+/Mg2+ ions are achieved via tuning the interactions of ions and water within a confined space.
- Open Access
- 19 October 2021
- Published by Wiley in Advanced Science
- Vol. 8 (23) , 2102493
2D Material Nanofiltration Membranes: From Fundamental Understandings to Rational Design
Since the discovery of 2D materials, 2D material nanofiltration (NF) membranes have attracted great attention and are being developed with a tremendously fast pace, due to their energy efficiency and cost effectiveness for water purification. The most attractive aspect for 2D material NF membranes is that, anomalous water and ion permeation phenomena have been constantly observed because of the presence of the severely confined nanocapillaries (<2 nm) in the membrane, leading to its great potential in achieving superior overall performance, e.g., high water flux, high rejection rates of ions, and high resistance to swelling. Hence, fundamental understandings of such water and ion transport behaviors are of great significance for the continuous development of 2D material NF membranes. In this work, the microscopic understandings developed up to date on 2D material NF membranes regarding the abnormal transport phenomena are reviewed, including ultrafast water and ion permeation rates with the magnitude several orders higher than that predicted by conventional diffusion behavior, ion dehydration, ionic Coulomb blockade, ion–ion correlations, etc. The state‐of‐the‐art structural designs for 2D material NF membranes are also reviewed. Discussion and future perspectives are provided highlighting the rational design of 2D material membrane structures in the future.
- 19 October 2021
- Published by Wiley in Advanced Science
- Vol. 8 (23) , 2102493
Open Access2D Material Nanofiltration Membranes: From Fundamental Understandings to Rational Design
Since the discovery of 2D materials, 2D material nanofiltration (NF) membranes have attracted great attention and are being developed with a tremendously fast pace, due to their energy efficiency and cost effectiveness for water purification. The most attractive aspect for 2D material NF membranes is that, anomalous water and ion permeation phenomena have been constantly observed because of the presence of the severely confined nanocapillaries (<2 nm) in the membrane, leading to its great potential in achieving superior overall performance, e.g., high water flux, high rejection rates of ions, and high resistance to swelling. Hence, fundamental understandings of such water and ion transport behaviors are of great significance for the continuous development of 2D material NF membranes. In this work, the microscopic understandings developed up to date on 2D material NF membranes regarding the abnormal transport phenomena are reviewed, including ultrafast water and ion permeation rates with the magnitude several orders higher than that predicted by conventional diffusion behavior, ion dehydration, ionic Coulomb blockade, ion–ion correlations, etc. The state‐of‐the‐art structural designs for 2D material NF membranes are also reviewed. Discussion and future perspectives are provided highlighting the rational design of 2D material membrane structures in the future.
- 28 June 2020
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 36 (28) , 8199-8208
Probing the Interaction Mechanism between Benzohydroxamic Acid and Mineral Surface in the Presence of Pb2+ Ions by AFM Force Measurements and First-Principles Calculations
Probing the interaction mechanism between organic molecules and material surfaces in the presence of metal ions is of great importance in many fields, such as mineral flotation. The collectability of benzohydroxamic acid (BHA) to spodumene (LiAl(SiO3)2) mineral surface during mineral flotation could be enhanced with the addition of metal ion activator - Pb2+ ions. Pb2+ ions could be added as either the Pb-BHA complexes formed by pre-mixing Pb2+ ions and BHA molecules at a given ratio or sequential addition of Pb2+ ions and BHA molecules. However, the complete understanding of the interaction mechanisms (e.g., adhesion) between BHA and spodumene mineral surface in the presence of Pb2+ ions remains very limited. In this study, atomic force microscopy (AFM) was used to measure the intermolecular forces between BHA and spodumene mineral surface in aqueous solutions. A BHA model molecule, i.e., N-hydroxy-4-mercaptobenzamide (MBHA), was synthesized to prepare a BHA-functionalized AFM probe for force measurements. Two model systems (i.e., Pb-BHA complex interacting with spodumene mineral surface (model Ⅰ) and BHA with Pb2+-activated spodumene surface (model Ⅱ)) were investigated for comparing the role of Pb2+ in the BHA-mineral adhesion. The adhesion measured for model Ⅰ (23.7 mN/m) is much higher than that of model Ⅱ (12.5 mN/m), as further supported by the adsorption energies obtained from density functional theory (DFT) calculations. The calculation results showed a higher adsorption energy for model Ⅰ (~188.58 kJ/mol) than model Ⅱ (~128.16 kJ/mol), which is the origin of a better spodumene flotation recovery for Pb-BHA complex as collector than sequential addition of Pb2+ and BHA. This work provides useful information on the intermolecular interactions between chemical additives and mineral surfaces in complex mineral flotation processes, and the methodology can be readily extended to other related interfacial processes, such as membrane technology, water treatment, oil production and bioengineering processes.
- 28 June 2020
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 36 (28) , 8199-8208
Probing the Interaction Mechanism between Benzohydroxamic Acid and Mineral Surface in the Presence of Pb2+ Ions by AFM Force Measurements and First-Principles Calculations
Probing the interaction mechanism between organic molecules and material surfaces in the presence of metal ions is of great importance in many fields, such as mineral flotation. The collectability of benzohydroxamic acid (BHA) to spodumene (LiAl(SiO3)2) mineral surface during mineral flotation could be enhanced with the addition of metal ion activator - Pb2+ ions. Pb2+ ions could be added as either the Pb-BHA complexes formed by pre-mixing Pb2+ ions and BHA molecules at a given ratio or sequential addition of Pb2+ ions and BHA molecules. However, the complete understanding of the interaction mechanisms (e.g., adhesion) between BHA and spodumene mineral surface in the presence of Pb2+ ions remains very limited. In this study, atomic force microscopy (AFM) was used to measure the intermolecular forces between BHA and spodumene mineral surface in aqueous solutions. A BHA model molecule, i.e., N-hydroxy-4-mercaptobenzamide (MBHA), was synthesized to prepare a BHA-functionalized AFM probe for force measurements. Two model systems (i.e., Pb-BHA complex interacting with spodumene mineral surface (model Ⅰ) and BHA with Pb2+-activated spodumene surface (model Ⅱ)) were investigated for comparing the role of Pb2+ in the BHA-mineral adhesion. The adhesion measured for model Ⅰ (23.7 mN/m) is much higher than that of model Ⅱ (12.5 mN/m), as further supported by the adsorption energies obtained from density functional theory (DFT) calculations. The calculation results showed a higher adsorption energy for model Ⅰ (~188.58 kJ/mol) than model Ⅱ (~128.16 kJ/mol), which is the origin of a better spodumene flotation recovery for Pb-BHA complex as collector than sequential addition of Pb2+ and BHA. This work provides useful information on the intermolecular interactions between chemical additives and mineral surfaces in complex mineral flotation processes, and the methodology can be readily extended to other related interfacial processes, such as membrane technology, water treatment, oil production and bioengineering processes.
- 1 May 2020
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 568, 36-45
Novel sodium alginate-assisted MXene nanosheets for ultrahigh rejection of multiple cations and dyes
- 1 May 2020
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 568, 36-45
Novel sodium alginate-assisted MXene nanosheets for ultrahigh rejection of multiple cations and dyes