Cam Phu Thi Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cam Phu Thi Nguyen has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Jan Seidel
School of Materials Science and Engineering, University of New South Wales, Sydney, Australia
2 shared publications - Junsin Yi
Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, Republic of Korea
2 shared publications - Peggy Schoenherr
Department of Materials, ETH Zurich, Vladimir-Prelog-Weg 4, 8093 Zurich, Switzerland
2 shared publications Anh Huy Tuan Le
1 shared publicationChi-Hieu Nguyen
Power Engineering Consulting Company, Southern Power Corporation 4 , Ho Chi Minh City 700000, Vietnam
1 shared publicationDonggi Shin
1 shared publication
Latest Publications
- 1 September 2023
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (5)
Optimal performances of a-Si:H/c-Si heterojunction silicon solar cells based on a statistical approach
Finding the optimal condition from a wide range of cell fabrication conditions and design parameters is typically a time-consuming and cumbersome task. In this study, the combination of the Taguchi approach and Grey relational analysis was employed for optimization of the conversion efficiency of hydrogenated amorphous silicon/crystalline silicon heterojunction (a-Si:H/c-Si HJ) solar cells. With the help of the Taguchi method via an orthogonal array, the reconstruction of the impact of input parameters on single performance characteristics is still ensured while reducing the number of simulations by 99.8%. The simulated results suggested that the density of interfacial defects (Dit) plays a key role in obtaining a high open-circuit voltage (Voc) and fill factor (FF), respectively. Meanwhile, the emitter thickness is the dominant factor in achieving a high short-circuit current density (Jsc). As a result, these two factors dominate the conversion efficiency. Furthermore, the overall optimal condition is also obtained by the Grey relational analysis. The simplified HJ cell configuration using this optimal condition displayed the highest conversion efficiency of 25.86%, yielding a 2.25% absolute increase in efficiency compared to the initial condition. The results highlight the effectiveness of our proposed approach in reducing the number of experiments needed for cell optimization.
- 1 September 2023
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (5)
Optimal performances of a-Si:H/c-Si heterojunction silicon solar cells based on a statistical approach
Finding the optimal condition from a wide range of cell fabrication conditions and design parameters is typically a time-consuming and cumbersome task. In this study, the combination of the Taguchi approach and Grey relational analysis was employed for optimization of the conversion efficiency of hydrogenated amorphous silicon/crystalline silicon heterojunction (a-Si:H/c-Si HJ) solar cells. With the help of the Taguchi method via an orthogonal array, the reconstruction of the impact of input parameters on single performance characteristics is still ensured while reducing the number of simulations by 99.8%. The simulated results suggested that the density of interfacial defects (Dit) plays a key role in obtaining a high open-circuit voltage (Voc) and fill factor (FF), respectively. Meanwhile, the emitter thickness is the dominant factor in achieving a high short-circuit current density (Jsc). As a result, these two factors dominate the conversion efficiency. Furthermore, the overall optimal condition is also obtained by the Grey relational analysis. The simplified HJ cell configuration using this optimal condition displayed the highest conversion efficiency of 25.86%, yielding a 2.25% absolute increase in efficiency compared to the initial condition. The results highlight the effectiveness of our proposed approach in reducing the number of experiments needed for cell optimization.
- Open Access
- 16 August 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-6
Crackling noise microscopy
Crackling noise is a scale-invariant phenomenon found in various driven nonlinear dynamical material systems as a response to external stimuli such as force or external fields. Jerky material movements in the form of avalanches can span many orders of magnitude in size and follow universal scaling rules described by power laws. The concept was originally studied as Barkhausen noise in magnetic materials and now is used in diverse fields from earthquake research and building materials monitoring to fundamental research involving phase transitions and neural networks. Here, we demonstrate a method for nanoscale crackling noise measurements based on AFM nanoindentation, where the AFM probe can be used to study the crackling of individual nanoscale features, a technique we call crackling noise microscopy. The method is successfully applied to investigate the crackling of individual topological defects, i.e. ferroelectric domain walls. We show that critical exponents for avalanches are altered at these nanoscale features, leading to a suppression of mixed-criticality, which is otherwise present in domains. The presented concept opens the possibility of investigating the crackling of individual nanoscale features in a wide range of material systems.
- 16 August 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-6
Open AccessCrackling noise microscopy
Crackling noise is a scale-invariant phenomenon found in various driven nonlinear dynamical material systems as a response to external stimuli such as force or external fields. Jerky material movements in the form of avalanches can span many orders of magnitude in size and follow universal scaling rules described by power laws. The concept was originally studied as Barkhausen noise in magnetic materials and now is used in diverse fields from earthquake research and building materials monitoring to fundamental research involving phase transitions and neural networks. Here, we demonstrate a method for nanoscale crackling noise measurements based on AFM nanoindentation, where the AFM probe can be used to study the crackling of individual nanoscale features, a technique we call crackling noise microscopy. The method is successfully applied to investigate the crackling of individual topological defects, i.e. ferroelectric domain walls. We show that critical exponents for avalanches are altered at these nanoscale features, leading to a suppression of mixed-criticality, which is otherwise present in domains. The presented concept opens the possibility of investigating the crackling of individual nanoscale features in a wide range of material systems.
- 27 September 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (40) , 16959-16967
In-depth atomic force microscopy investigation of nanoscale mechanical properties of Pāua nacre
An in-depth atomic force microscopy (AFM) study investigating the mechanical properties of nacre from a Pāua abalone shell. Comparing three different AFM modes allows for the extraction of comparable and quantitative results on the nanoscale.
- 27 September 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (40) , 16959-16967
In-depth atomic force microscopy investigation of nanoscale mechanical properties of Pāua nacre
An in-depth atomic force microscopy (AFM) study investigating the mechanical properties of nacre from a Pāua abalone shell. Comparing three different AFM modes allows for the extraction of comparable and quantitative results on the nanoscale.
- 27 August 2019
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 34 (9) , 095020
Improvement of the storage ability of Si-rich oxide layer in poly-Si based nonvolatile memory devices by implementation of taguchi method
The storage ability of silicon-rich silicon oxide (Si-rich SiO x ) floating gates plays a critical role in poly-Si nonvolatile memory devices. In this study, the Taguchi method, a statistical means of experimental design which allows for the optimization of the storage characteristics with a dramatic reduction in the number of experiments by approximately 90%, is used. The memory window of the metal insulator semiconductor devices is used as a figure of merit to find out the optimal process parameters. Furthermore, the analysis of variance showed that the substrate temperature is the dominant factor affecting the memory characteristics of the SiO x storage layers. A significant improvement in the performance of poly-Si nonvolatile memory devices using the optimal Si-rich SiO x as a charge storage layer was observed. These devices show retention of the threshold voltage shift exceeding ∼98% after 10 4 s and ∼96% after 10 years extrapolation with programming/erasing voltages of −12 V/+11 V at a low duration of 1 μ s. Therefore, the poly-Si based nonvolatile memory devices using Si-rich SiO x as a storage layer show a high potential for memory system applications.
- 27 August 2019
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 34 (9) , 095020
Improvement of the storage ability of Si-rich oxide layer in poly-Si based nonvolatile memory devices by implementation of taguchi method
The storage ability of silicon-rich silicon oxide (Si-rich SiO x ) floating gates plays a critical role in poly-Si nonvolatile memory devices. In this study, the Taguchi method, a statistical means of experimental design which allows for the optimization of the storage characteristics with a dramatic reduction in the number of experiments by approximately 90%, is used. The memory window of the metal insulator semiconductor devices is used as a figure of merit to find out the optimal process parameters. Furthermore, the analysis of variance showed that the substrate temperature is the dominant factor affecting the memory characteristics of the SiO x storage layers. A significant improvement in the performance of poly-Si nonvolatile memory devices using the optimal Si-rich SiO x as a charge storage layer was observed. These devices show retention of the threshold voltage shift exceeding ∼98% after 10 4 s and ∼96% after 10 years extrapolation with programming/erasing voltages of −12 V/+11 V at a low duration of 1 μ s. Therefore, the poly-Si based nonvolatile memory devices using Si-rich SiO x as a storage layer show a high potential for memory system applications.