Francesco Liberato Cappiello
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francesco Liberato Cappiello has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Maria Vicidomini
Department of Industrial Engineering, University of Naples Federico II, Piazzale Tecchio 80, 80125 Naples, Italy
24 shared publications - Francesco Calise
Department of Industrial Engineering, University of Naples Federico II, Piazzale Tecchio 80, 80125 Naples, Italy
19 shared publications - Luca Cimmino
Department of Industrial Engineering, University of Naples Federico II, 80138 Naples, Italy
16 shared publications Francesco Calise
13 shared publicationsMaria Vicidomini
11 shared publications- Massimo Dentice D'Accadia
Department of Industrial Engineering, University of Naples Federico II, 80125 Naples, Italy
9 shared publications
Latest Publications
- Open Access
- 24 October 2026
- Published by Elsevier in Renewable Energy
- Vol. 278
A lumped-parameters dynamic model for metal hydride hydrogen storage in renewable energy systems
- 24 October 2026
- Published by Elsevier in Renewable Energy
- Vol. 278
Open AccessA lumped-parameters dynamic model for metal hydride hydrogen storage in renewable energy systems
- Open Access
- 15 July 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 367
System-level assessment of electrodialysis desalination as a flexible Power-to-Water load in isolated renewable islands
- 15 July 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 367
Open AccessSystem-level assessment of electrodialysis desalination as a flexible Power-to-Water load in isolated renewable islands
- Open Access
- 29 May 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 364
Dynamic analysis of a novel liquid carbon dioxide system for electric energy storage
- 29 May 2026
- Published by Elsevier in Energy Conversion and Management
- Vol. 364
Open AccessDynamic analysis of a novel liquid carbon dioxide system for electric energy storage
- Open Access
A Novel Capacitive Model of Radiators for Building Dynamic Simulations
This study addresses the critical challenge of performing a detailed calculation of energy savings in buildings by implementing suitable actions aiming at reducing greenhouse gas emissions. Given the high energy consumption of buildings’ space heating systems, optimizing their performance is crucial for reducing their overall primary energy demand. Unfortunately, the calculations of such savings are often based on extremely simplified methods, neglecting the dynamics of the emitters installed inside the buildings. These approximations may lead to relevant errors in the estimation of the possible energy savings. In this framework, the present study presents a novel 0-dimensional capacitive model of a radiator, the most common emitter used in residential buildings. The final scope of this paper is to integrate such a novel model within the TRNSYS 18simulation environment, performing a 1-year simulation of the overall building-space heating system. The radiator model is developed in MATLAB 2024b and it carefully considers the impact of surface area, inlet temperature, and flow rate on the radiator performance. Moreover, the dynamic heat transfer rate of the capacitive radiator is compared with the one returned by the built-in non-capacitive model available in TRNSYS, showing that neglecting the capacitive effect of radiators leads to an incorrect estimation of the heating consumption. During the winter season, with a heating system turned on from 8 a.m. to 4 p.m. and from 6 p.m. to 8 p.m., the thermal energy is underestimated by roughly 20% with the commonly used non-capacitive model.
Open AccessA Novel Capacitive Model of Radiators for Building Dynamic Simulations
This study addresses the critical challenge of performing a detailed calculation of energy savings in buildings by implementing suitable actions aiming at reducing greenhouse gas emissions. Given the high energy consumption of buildings’ space heating systems, optimizing their performance is crucial for reducing their overall primary energy demand. Unfortunately, the calculations of such savings are often based on extremely simplified methods, neglecting the dynamics of the emitters installed inside the buildings. These approximations may lead to relevant errors in the estimation of the possible energy savings. In this framework, the present study presents a novel 0-dimensional capacitive model of a radiator, the most common emitter used in residential buildings. The final scope of this paper is to integrate such a novel model within the TRNSYS 18simulation environment, performing a 1-year simulation of the overall building-space heating system. The radiator model is developed in MATLAB 2024b and it carefully considers the impact of surface area, inlet temperature, and flow rate on the radiator performance. Moreover, the dynamic heat transfer rate of the capacitive radiator is compared with the one returned by the built-in non-capacitive model available in TRNSYS, showing that neglecting the capacitive effect of radiators leads to an incorrect estimation of the heating consumption. During the winter season, with a heating system turned on from 8 a.m. to 4 p.m. and from 6 p.m. to 8 p.m., the thermal energy is underestimated by roughly 20% with the commonly used non-capacitive model.
- Open Access
- 2 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (19) , 8900
Analysis of the Impact of Funding Policies for the Energy Refurbishment of Buildings Using Dynamic Simulations
Dynamic simulations can accurately estimate the thermal demands for space heating and cooling in buildings, as well as the energy and economic performance of specific energy refurbishment actions. This study aims to evaluate the energy and economic savings resulting from the adoption of particular energy measures applied to a cluster of residential condominium buildings, also considering some possible Italian funding policies. To this scope, dynamic simulation models of several buildings with different features in terms of geometry, shape, and thermo-physical properties are considered. The selected buildings are representative of the most common buildings in the city of Naples, Southern Italy. Two scenarios regarding the possible penetration of the refurbishment actions are considered: the “25% scenario”, where 25% of buildings in the Naples municipality adopt the selected measures, and the “100% scenario”, where all buildings adopt such energy refurbishment actions. The results of the simulations, reported over different time periods, compare the economic, energy, and environmental benefits of the specific energy measures. This study evaluates the replacement of conventional natural gas-fired boilers with natural gas-fired condensing boilers, as well as the use of thermal insulation on the external walls of the buildings. The primary energy demand for space heating decreased by 28% when the proposed energy measures were implemented in all buildings of the Naples municipality.
- 2 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (19) , 8900
Open AccessAnalysis of the Impact of Funding Policies for the Energy Refurbishment of Buildings Using Dynamic Simulations
Dynamic simulations can accurately estimate the thermal demands for space heating and cooling in buildings, as well as the energy and economic performance of specific energy refurbishment actions. This study aims to evaluate the energy and economic savings resulting from the adoption of particular energy measures applied to a cluster of residential condominium buildings, also considering some possible Italian funding policies. To this scope, dynamic simulation models of several buildings with different features in terms of geometry, shape, and thermo-physical properties are considered. The selected buildings are representative of the most common buildings in the city of Naples, Southern Italy. Two scenarios regarding the possible penetration of the refurbishment actions are considered: the “25% scenario”, where 25% of buildings in the Naples municipality adopt the selected measures, and the “100% scenario”, where all buildings adopt such energy refurbishment actions. The results of the simulations, reported over different time periods, compare the economic, energy, and environmental benefits of the specific energy measures. This study evaluates the replacement of conventional natural gas-fired boilers with natural gas-fired condensing boilers, as well as the use of thermal insulation on the external walls of the buildings. The primary energy demand for space heating decreased by 28% when the proposed energy measures were implemented in all buildings of the Naples municipality.
- Open Access
A Dynamic Analysis of Biomethane Reforming for a Solid Oxide Fuel Cell Operating in a Power-to-Heat System Integrated into a Renewable Energy Community
This paper aims to develop a dynamic simulation model for the reduction of energy consumption through the use of organic waste from a residential district, supplied by a hybrid renewable energy plant. The proposed layout is based on a novel paradigm of a renewable energy community focused on the biocircular economy and a sustainable approach. The novelty with respect to the majority of papers developed in the literature on renewable energy communities lies in the use of both solar photovoltaic production and the organic fraction of municipal solid waste collected by the community. Energy production by biomass conversion and by photovoltaic fields shared among the buildings is used to satisfy in a sustainable manner the community loads for heating, cooling, and power. The district heating network is based on water loop heat pumps and air-to-air heat pumps and it includes the power-to-heat energy storage strategy. The biogas produced by the anaerobic digestion process is cleaned in order to supply a solid oxide fuel cell for the production of additional power, mainly during the hours of poor or null solar energy production. Then, the layout integrates several innovative topics, such as the power-to-heat strategy, the biocircular economy, the low-temperature district heating, the use of a solid oxide fuel cell, and a renewable energy community. The dynamic model of the proposed hybrid renewable layout is developed in the TRNSYS environment, but some innovative energy components, such as anaerobic digestion, the biogas upgrading unit, and the solid oxide fuel cell, are dynamically modeled in MATLAB and then integrated into the whole plant model. The proposed plant has been confirmed to be extremely profitable and able to obtain important energy savings, considering the achieved payback period of 4.48 years and the primary energy saving of 23%. This layout resulted in an interesting solution for pushing the development of smart and sustainable cities.
Open AccessA Dynamic Analysis of Biomethane Reforming for a Solid Oxide Fuel Cell Operating in a Power-to-Heat System Integrated into a Renewable Energy Community
This paper aims to develop a dynamic simulation model for the reduction of energy consumption through the use of organic waste from a residential district, supplied by a hybrid renewable energy plant. The proposed layout is based on a novel paradigm of a renewable energy community focused on the biocircular economy and a sustainable approach. The novelty with respect to the majority of papers developed in the literature on renewable energy communities lies in the use of both solar photovoltaic production and the organic fraction of municipal solid waste collected by the community. Energy production by biomass conversion and by photovoltaic fields shared among the buildings is used to satisfy in a sustainable manner the community loads for heating, cooling, and power. The district heating network is based on water loop heat pumps and air-to-air heat pumps and it includes the power-to-heat energy storage strategy. The biogas produced by the anaerobic digestion process is cleaned in order to supply a solid oxide fuel cell for the production of additional power, mainly during the hours of poor or null solar energy production. Then, the layout integrates several innovative topics, such as the power-to-heat strategy, the biocircular economy, the low-temperature district heating, the use of a solid oxide fuel cell, and a renewable energy community. The dynamic model of the proposed hybrid renewable layout is developed in the TRNSYS environment, but some innovative energy components, such as anaerobic digestion, the biogas upgrading unit, and the solid oxide fuel cell, are dynamically modeled in MATLAB and then integrated into the whole plant model. The proposed plant has been confirmed to be extremely profitable and able to obtain important energy savings, considering the achieved payback period of 4.48 years and the primary energy saving of 23%. This layout resulted in an interesting solution for pushing the development of smart and sustainable cities.
- Open Access
- 30 May 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 361, 121261
Single mixed refrigerant biomethane liquefaction plant integrated with solar energy: Dynamic simulation for the decarbonization of the heavy road transport sector
- 30 May 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 361, 121261
Open AccessSingle mixed refrigerant biomethane liquefaction plant integrated with solar energy: Dynamic simulation for the decarbonization of the heavy road transport sector
- Open Access
A Novel Layout for Combined Heat and Power Production for a Hospital Based on a Solid Oxide Fuel Cell
This paper addresses the problem of the reduction in the huge energy demand of hospitals and health care facilities. The sharp increase in the natural gas price, due to the Ukrainian–Russian war, has significantly reduced economic savings achieved by combined heat and power (CHP) units, especially for hospitals. In this framework, this research proposes a novel system based on the integration of a reversible CHP solid oxide fuel cell (SOFC) and a photovoltaic field (PV). The PV power is mainly used for balancing the hospital load. The excess power production is exploited to produce renewable hydrogen. The SOFC operates in electrical tracking mode. The cogenerative heat produced by the SOFC is exploited to partially meet the thermal load of the hospital. The SOFC is driven by the renewable hydrogen produced by the plant. When this hydrogen is not available, the SOFC is driven by natural gas. In fact, the SOFC is coupled with an external reformer. The simulation model of the whole plant, including the reversible SOFC, PV, and hospital, is developed in the TRNSYS18 environment and MATLAB. The model of the hospital is calibrated by means of measured data. The proposed system achieves very interesting results, with a primary energy-saving index of 33% and a payback period of 6.7 years. Therefore, this energy measure results in a promising solution for reducing the environmental impact of hospital and health care facilities.
Open AccessA Novel Layout for Combined Heat and Power Production for a Hospital Based on a Solid Oxide Fuel Cell
This paper addresses the problem of the reduction in the huge energy demand of hospitals and health care facilities. The sharp increase in the natural gas price, due to the Ukrainian–Russian war, has significantly reduced economic savings achieved by combined heat and power (CHP) units, especially for hospitals. In this framework, this research proposes a novel system based on the integration of a reversible CHP solid oxide fuel cell (SOFC) and a photovoltaic field (PV). The PV power is mainly used for balancing the hospital load. The excess power production is exploited to produce renewable hydrogen. The SOFC operates in electrical tracking mode. The cogenerative heat produced by the SOFC is exploited to partially meet the thermal load of the hospital. The SOFC is driven by the renewable hydrogen produced by the plant. When this hydrogen is not available, the SOFC is driven by natural gas. In fact, the SOFC is coupled with an external reformer. The simulation model of the whole plant, including the reversible SOFC, PV, and hospital, is developed in the TRNSYS18 environment and MATLAB. The model of the hospital is calibrated by means of measured data. The proposed system achieves very interesting results, with a primary energy-saving index of 33% and a payback period of 6.7 years. Therefore, this energy measure results in a promising solution for reducing the environmental impact of hospital and health care facilities.
- Open Access
- 6 June 2023
- Published by Elsevier in Renewable Energy
- Vol. 214, 74-95
Renewable smart energy network: A thermoeconomic comparison between conventional lithium-ion batteries and reversible solid oxide fuel cells
- 6 June 2023
- Published by Elsevier in Renewable Energy
- Vol. 214, 74-95
Open AccessRenewable smart energy network: A thermoeconomic comparison between conventional lithium-ion batteries and reversible solid oxide fuel cells