Chun-Min Yu

Product lifetime is a critical quality characteristic of electronic products. Among various lifetime models, the Weibull distribution is one of the most flexible and widely used distributions in reliability analysis because it can describe different failure rate patterns through its shape parameter. In this study, the Weibull distribution is treated as the primary lifetime model, while the exponential distribution is included as a simpler benchmark model and as a special case of the Weibull distribution with shape parameter m = 1. Based on the lifetime performance index, this research applies the group sampling concept to design two lifetime acceptance sampling plans under these lifetime distributions. The optimal sampling plan parameters of the lifetime acceptance sampling plans are determined by minimizing the number of groups while satisfying the two-point principle of the operating characteristic curve. For practical purposes, the parameters of the proposed plan are tabulated for some combinations of quality levels with commonly used producer risk and consumer risk. Moreover, a comparative analysis of the two lifetime testing methods is presented, and the results show that Testing Method II proposed in this study can implement sampling inspection more efficiently. Finally, an example is used to illustrate the proposed methodology.

This study examines how government policy tools shape consumer adoption of battery electric vehicles (BEVs) in Taiwan. By extending the Technology Acceptance Model (TAM) focusing on three external government policy factors—legislative direction, monetary incentives, and usage-based benefits—this study uses two factors, including perceived usefulness (PU) and perceived ease of use (PEOU), to evaluate behavioral intention to use (BI), or purchase, BEVs. Utilizing PLS-SEM, survey data from 238 respondents were analyzed. The results suggest that legislative direction had no significant impact on PU or PEOU, while monetary incentives influenced only PEOU. In contrast, usage-based benefits strongly predicted both PU and PEOU. In addition, PU also partially mediates the relationship between PEOU and BI. These findings extend the TAM by situating public policy as a measurable driver of technology adoption, especially in the case of BEVs. For Taiwan, the results suggest that governmental policies focused on increased visibility and accessibility are more attractive than abstract regulatory frameworks in encouraging BEV adoption.

A segment of the machine tool industry in Taiwan specializes in manufacturing equipment tailored to the semiconductor sector. Due to the stringent quality requirements inherent in semiconductor manufacturing processes, the machine tools employed in these processes are also subject to correspondingly rigorous quality standards. In fact, a machine tool is assembled from hundreds of individual components, each of which must meet the required standards to ensure that the final product adheres to overall quality requirements. Similarly, each component possesses multiple quality characteristics, all of which must individually satisfy the specified criteria to guarantee that the component achieves the required quality level. Clearly, without a comprehensive evaluation model, ensuring final product quality is difficult. To address this practical issue, this study employed the Process Capability Index (PCI), the most widely used process capability index in the industry, and based on statistical verification principles, constructed a quality assessment and analysis model applicable to products with multiple quality characteristics. This approach enables process engineers to simultaneously evaluate all product quality characteristics and determine whether they meet the desired quality standards. For products that do not meet the expected quality standards, improvement directions are proposed, and improvement decisions are made based on cost and economic benefits, thereby ensuring final product quality. This study concludes with a real-world case study to illustrate the application of the proposed model, making it easier for relevant industries to apply the model.

This study aims to create a performance evaluation model for the food processing machinery industry. The goal is to help food processing plants improve both process quality and competitiveness. Additionally, component failures may disrupt the continuous operation of the food processing machine, potentially resulting in insufficient production and delays in delivery, which in turn leads to cost losses. For the sold food processing machinery, decreases in the average number of failures within a unit of time, the average repair response time when a failure occurs, and the average repair duration are three crucial factors in minimizing the total expected loss due to machine failures. Based on these three important factors, this study established the following evaluation indices: (1) the processing performance index, (2) the repair reporting performance index, and (3) the maintenance performance index. These indices serve as tools for assessing the performance of the three key operational aspects. This study employed a radar chart to construct the evaluation model, which can directly compare the critical values with the point estimates of three indices. Consequently, this approach can judge whether the operational performance has achieved the required level. This can maintain the simplicity and usability of point estimates while reducing the risk of misjudgment due to sampling errors.

The rapid progression of emerging technologies like the Internet of Things (IoT) and Big Data analytics for manufacturing has driven innovation across various industries worldwide. Production data are utilized to construct a model for quality evaluation and analysis applicable to components processed by machine tools, ensuring process quality for critical components and final product quality for the machine tools. Machine tool parts often encompass several quality characteristics concurrently, categorized into three types: smaller-the-better, larger-the-better, and nominal-the-better. In this paper, an evaluation index for the nominal-the-better quality characteristic was segmented into two single-sided Six Sigma quality indexes. Furthermore, the process quality of the entire component product was assessed by n single-sided Six Sigma quality indexes. According to numerous studies, machine tool manufacturers conventionally base their decisions on small sample sizes (n), considering timeliness and costs. However, this often leads to inconsistent evaluation results due to significant sampling errors. Therefore, this paper established fuzzy testing rules using the confidence intervals of the q single-sided Six Sigma quality indices, serving as the fuzzy quality evaluation model for components of machine tools.

Foreign language learning courses can be regarded as a service operation system, and a complete foreign language learning course performance evaluation model can help improve the effectiveness of student learning. The performance evaluation matrix (PEM) is an excellent tool for evaluation and resource management decision making, and the administrator uses the satisfaction and the importance indices to establish evaluation coordinate points based on the rules of statistical testing. The coordinate points of all service items are plotted into the PEM to grasp the full picture and to make decisions on what to improve or to consider resource transfers so as to elevate the overall satisfaction of the entire service. However, plotting all the coordinate points on the PEM can only be performed by programming, which will lead to limitations in practice. Therefore, instead of the above evaluation rules, this article uses the confidence intervals of decision-making indicators to form a validity evaluation table, to decide which teaching service items should be improved, maintained, or transferred to improve the satisfaction of the entire service system. This form of performance evaluation can be completed using any commonly used word-processing software, so it is easy to apply and promote. Finally, this article provides an applied example to illustrate the proposed method.

As global warming becomes increasingly serious, humans start to consider how to coexist with the natural environment. People become more and more aware of environmental protection and sustainable development. Therefore, in the pursuit of economic growth, it has become a consensus that enterprises should be responsible for the social and ecological environment. Regarding the manufacturing of electronic devices, as long as both component production quality and assembly quality are ensured, consumers can be provided with high-quality, safe, and efficient products. In light of this trend, enhancing product availability and reliability can reduce costs and carbon emissions resulting from repairing or replacing components, thus becoming a vital factor for corporate and environmental sustainability. Accordingly, enterprises enhance their economic benefits as well as have the effects of energy conservation and waste reduction by extending products’ service lifetime and increasing their added value. According to several studies, it takes a long time to retrieve electronic products’ lifetime data. Moreover, acquiring complete samples is often challenging. Consequently, when analyzing real cases, samples are usually collected using censoring techniques. The type-I right censoring data is suitable for industrial processes. Thus, this study utilized type-I right censoring sample data to estimate the lifetime performance index. It usually takes a large amount of time to access lifetime data for electronic products and it is often impossible to obtain complete samples since the size of the sample is usually small. Hence, to avoid misjudgment caused by sampling errors, this study followed suggestions from existing research and applied fuzzy tests built on confidence intervals to establish a fuzzy evaluation model for the lifetime performance index. This model helps relevant electronic industries not only evaluate the lifetime of their electronic components but also instantly seize opportunities for improvement.

A variety of process capability indices are applied to the quantitative measurement of the potential and performance of processes in manufacturing. As it is easy to understand the formulae of these indices, this method is easy to apply. Furthermore, a process capability index is frequently utilized by a manufacturer to gauge the quality of a process. This index can be utilized by not only an internal process engineer to assess the quality of the process but also as a communication tool for an external sales department. When the manufacturing process deviates from the target value T, the process capability index C_PMK can be quickly detected, which is conducive to the promotion of smart manufacturing. Therefore, this study applied the index C_PMK as an evaluation tool for process quality. As noted by some studies, process capability indices have unknown parameters and therefore must be estimated from sample data. Additionally, numerous studies have addressed that it is essential for companies to establish a rapid response mechanism, as they wish to make decisions quickly when using a small sample size. Considering the small sample size, this study proposed a 100 (1 − α)% confidence interval for the process capability index C_PMK based on suggestions from previous studies. Subsequently, this study built a fuzzy testing model on the 100 (1 − α)% confidence interval for the process capability index C_PMK. This fuzzy testing model can help enterprises make decisions rapidly with a small sample size, meeting their expectation of having a rapid response mechanism.

Some studies have shown that any part machined by an outsourcer usually has several basic quality characteristics. When the outsourcer’s process capabilities are insufficient, the defective rate of various quality characteristics of the product will increase, thereby raising the rework rate and scrap rate. As a result, maintenance costs will go up, economic value will decrease, and even carbon emissions can increase during the production process. In addition, the process capability index and the radar chart are widely used in engineering management and other fields. Since process indicators often contain unknown parameters, sample data are needed for evaluation. With the rapid development of the Internet of Things and big data analysis, many companies regard rapid response as a basic requirement for timeliness and cost consideration. Therefore, companies often have to evaluate the process quality of ten small samples and decide whether to make some improvements. In order to solve the above problems, this study proposed a fuzzy radar chart evaluation model for the process quality of multi-quality characteristic parts based on the process capability index. Using this model can help all parts manufacturers continue to improve the quality of their machined parts as well as reduce their rework and scrap rates. Meanwhile, carbon emissions can be lessened during the production process, and companies can fulfill their social responsibilities. This fuzzy radar chart evaluation model is based on confidence intervals. As the company’s past experience is incorporated, the evaluation accuracy can be maintained even with a smaller sample size. Furthermore, the fuzzy radar evaluation chart can simultaneously evaluate the process capabilities of all quality characteristics of the part. In addition to making it easier for manufacturers to master all quality characteristics, quality process capability can also help them seize improvement opportunities.