Nicolas Bruzy
Research Subjects
Nicolas Bruzy has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
- Christophe Denoual
CEA, DAM, DIF 1 , F-91297 Arpajon, France
6 shared publications - Etienne Barraud
CEA, DAM
3 shared publications - Robin Fréville
CEA, DAM, DIF, F-91297 Arpajon, France
3 shared publications Agnès Dewaele
2 shared publications- Agnès Dewaele
CEA DAM-DIF, F-91297, Arpajon, France and Université Paris-Saclay, CEA, Laboratoire Matière en Conditions Extrêmes, 91680 Bruyères-le-Châtel, France
2 shared publications - Charles M. Pépin
CEA, DAM, DIF, 91297 Arpajon Cedex, France
2 shared publications
Latest Publications
- Open Access
- 14 November 2026
- Published by Springer Nature in Communications Materials
Mechanisms of β ↔ γ transformations in tin induce asymmetric kinetics
Solid-solid phase transformation mechanisms need to be understood to establish suitable kinetic laws. Here, the β -Sn ↔ γ -Sn phase transformations are investigated at different strain rates at 300 K. On one side, single crystals have been statically compressed and characterized using in situ x-ray diffraction. Multiple transformation cycles were performed in diamond anvil cells to measure their conditions and the associated microstructures. (101) β ∣∣(110) γ and $${[10\bar{1}]}_{\beta }| | {[1\bar{1}1]}_{\gamma }$$ orientation relationships (OR) between β -Sn and γ -Sn are observed in most cases, for both direct and reverse transformations. An atomic martensitic transformation mechanism, associated with self-accommodation, is proposed to account for these OR and variant selection. However, γ -Sn → β -Sn reversion also presents features that are consistent with recrystallization in β -Sn or a massive transformation. On the other side, time-resolved (22 μ s scale) dynamic diamond anvil cell experiments have been carried out. They show that while β -Sn → γ -Sn transformation is fast ( P β → γ =10.9 ± 0.2, insensitive to strain rate), reversion pressure P γ → β varies with strain rate, from 9.4 ± 0.8 GPa to 6.35 ± 0.7 GPa. Moreover, timescales of β -Sn formation and subsequent recrystallization/growth in this phase can be distinguished. A different kinetic description needs to be used for direct and reverse transitions.- 14 November 2026
- Published by Springer Nature in Communications Materials
Open AccessMechanisms of β ↔ γ transformations in tin induce asymmetric kinetics
Solid-solid phase transformation mechanisms need to be understood to establish suitable kinetic laws. Here, the β -Sn ↔ γ -Sn phase transformations are investigated at different strain rates at 300 K. On one side, single crystals have been statically compressed and characterized using in situ x-ray diffraction. Multiple transformation cycles were performed in diamond anvil cells to measure their conditions and the associated microstructures. (101) β ∣∣(110) γ and $${[10\bar{1}]}_{\beta }| | {[1\bar{1}1]}_{\gamma }$$ orientation relationships (OR) between β -Sn and γ -Sn are observed in most cases, for both direct and reverse transformations. An atomic martensitic transformation mechanism, associated with self-accommodation, is proposed to account for these OR and variant selection. However, γ -Sn → β -Sn reversion also presents features that are consistent with recrystallization in β -Sn or a massive transformation. On the other side, time-resolved (22 μ s scale) dynamic diamond anvil cell experiments have been carried out. They show that while β -Sn → γ -Sn transformation is fast ( P β → γ =10.9 ± 0.2, insensitive to strain rate), reversion pressure P γ → β varies with strain rate, from 9.4 ± 0.8 GPa to 6.35 ± 0.7 GPa. Moreover, timescales of β -Sn formation and subsequent recrystallization/growth in this phase can be distinguished. A different kinetic description needs to be used for direct and reverse transitions. - Open Access
- 1 September 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 114 (15) , 154101
Structure of niobium to 365 GPa using ultrafast x-ray diffraction and shock compression
The phase stability, crystal structure, and melting of Nb have been examined under high pressure shock compression to 365 GPa using ultrafast x-ray diffraction measurements on two x-ray free electron laser facilities. On compression, Nb remains stable in the bcc phase up to 220 GPa, with coexistence of bcc-Nb and liquid from 249 to 298 GPa, and complete melting at 301 GPa, with melt identified by diffuse liquid diffraction. Melting initiates at higher pressure than expected based on theoretical predictions, and the data consistently excludes the presence of other suggested phases of Nb at these pressures, including and hcp, thereby resolving the long-standing structural discrepancy. Singh-type strength analysis provides experimental evidence for a change in sign of the elastic anisotropy parameter at 121 GPa, consistent with the previously reported heat-induced hardening to heat-induced softening transition in Nb.
- 1 September 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 114 (15) , 154101
Open AccessStructure of niobium to 365 GPa using ultrafast x-ray diffraction and shock compression
The phase stability, crystal structure, and melting of Nb have been examined under high pressure shock compression to 365 GPa using ultrafast x-ray diffraction measurements on two x-ray free electron laser facilities. On compression, Nb remains stable in the bcc phase up to 220 GPa, with coexistence of bcc-Nb and liquid from 249 to 298 GPa, and complete melting at 301 GPa, with melt identified by diffuse liquid diffraction. Melting initiates at higher pressure than expected based on theoretical predictions, and the data consistently excludes the presence of other suggested phases of Nb at these pressures, including and hcp, thereby resolving the long-standing structural discrepancy. Singh-type strength analysis provides experimental evidence for a change in sign of the elastic anisotropy parameter at 121 GPa, consistent with the previously reported heat-induced hardening to heat-induced softening transition in Nb.
- 17 June 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (23)
Orientation dependence of the α –ε– α transition cycle in dynamically compressed polycrystalline iron samples
Iron samples with varying initial grain sizes were submitted to dynamical compression using laser ramp loading. Electron backscatter diffraction mappings of crystal orientations were performed in their cross section and evidenced the emergence of reversion variants (i.e., grains not present in the initial microstructure induced by the loading–unloading cycle) whose sizes scale with the initial grain size. The analysis procedure of these variants combines the comparison of their orientations with theoretical predictions from a graph of transformation sequences and the characterization of their inclinations in terms of kinematical compatibility conditions. It appears that reversion variants can be α–Fe twins or α–ε–α′ variants formed either within ε–Fe grains or at their boundaries. The coexistence of two ε–Fe variants is identified as a condition for the formation of α–ε–α′ variants. Stress inhomogeneities induced by α–Fe twinning are also highlighted.
- 17 June 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (23)
Orientation dependence of the α –ε– α transition cycle in dynamically compressed polycrystalline iron samples
Iron samples with varying initial grain sizes were submitted to dynamical compression using laser ramp loading. Electron backscatter diffraction mappings of crystal orientations were performed in their cross section and evidenced the emergence of reversion variants (i.e., grains not present in the initial microstructure induced by the loading–unloading cycle) whose sizes scale with the initial grain size. The analysis procedure of these variants combines the comparison of their orientations with theoretical predictions from a graph of transformation sequences and the characterization of their inclinations in terms of kinematical compatibility conditions. It appears that reversion variants can be α–Fe twins or α–ε–α′ variants formed either within ε–Fe grains or at their boundaries. The coexistence of two ε–Fe variants is identified as a condition for the formation of α–ε–α′ variants. Stress inhomogeneities induced by α–Fe twinning are also highlighted.
- Open Access
- 11 June 2026
- Published by Springer Nature in Research Square
Mixed diffusive/martensitic character of the pressure-induced β←→γ transformation in tin
Solid-solid phase transformation mechanisms need to be understood to establish suitable kinetic laws. Here, the β-Sn ←→ γ-Sn phase transformations are investigated at different strain rates at 300 K. On one side, single crystals have been statically compressed and characterized using in situ x-ray diffraction. Multiple transformation cycles were performed in diamond anvil cells to measure their conditions and the associated microstructures. (101) β ||(110) γ and [10-1] β ||[1-11] γ orientation relationships (OR) between β-Sn and γ-Sn are observed in most cases, for both direct and reverse transformations. An atomic martensitic transformation mechanism, associated with self-accommodation, is proposed to account for these OR and variant selection. However, γ-Sn→β-Sn reversion also presents massive diffusive transformation microstructural features. On the other side, time-resolved (4 μs scale) dynamic diamond anvil cell experiments have been carried out. They confirm that while β-Sn→γ-Sn transformation is martensitic and fast (P β→γ =10.9±0.2, insensitive to strain rate), timescales of β-Sn formation and subsequent recrystallization/growth in this phase can be distinguished for the γ-Sn→β-Sn transformation. As a result, measured transition pressure P γ→β varies with strain rate, from 9.4±0.8 GPa to 6.35±0.4 GPa. A different kinetic description needs to be used for direct and reverse transitions.
- 11 June 2026
- Published by Springer Nature in Research Square
Open AccessMixed diffusive/martensitic character of the pressure-induced β←→γ transformation in tin
Solid-solid phase transformation mechanisms need to be understood to establish suitable kinetic laws. Here, the β-Sn ←→ γ-Sn phase transformations are investigated at different strain rates at 300 K. On one side, single crystals have been statically compressed and characterized using in situ x-ray diffraction. Multiple transformation cycles were performed in diamond anvil cells to measure their conditions and the associated microstructures. (101) β ||(110) γ and [10-1] β ||[1-11] γ orientation relationships (OR) between β-Sn and γ-Sn are observed in most cases, for both direct and reverse transformations. An atomic martensitic transformation mechanism, associated with self-accommodation, is proposed to account for these OR and variant selection. However, γ-Sn→β-Sn reversion also presents massive diffusive transformation microstructural features. On the other side, time-resolved (4 μs scale) dynamic diamond anvil cell experiments have been carried out. They confirm that while β-Sn→γ-Sn transformation is martensitic and fast (P β→γ =10.9±0.2, insensitive to strain rate), timescales of β-Sn formation and subsequent recrystallization/growth in this phase can be distinguished for the γ-Sn→β-Sn transformation. As a result, measured transition pressure P γ→β varies with strain rate, from 9.4±0.8 GPa to 6.35±0.4 GPa. A different kinetic description needs to be used for direct and reverse transitions.
- 5 May 2026
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 214
Infimal representation of Landau potentials
- 5 May 2026
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 214
Infimal representation of Landau potentials
- 24 October 2025
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 206
Statistical modeling and generation of inertial ductile fracture surfaces
- 24 October 2025
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 206
Statistical modeling and generation of inertial ductile fracture surfaces
- 2 September 2025
- Published by Elsevier in Acta Materialia
- Vol. 301
Microstructure-inferred transition paths in shocked iron single crystals
- 2 September 2025
- Published by Elsevier in Acta Materialia
- Vol. 301
Microstructure-inferred transition paths in shocked iron single crystals
- 9 May 2025
- Published by Elsevier in Materials Today Communications
- Vol. 46
Identification of diffusionless transformation sequences from crystal orientation data
- 9 May 2025
- Published by Elsevier in Materials Today Communications
- Vol. 46
Identification of diffusionless transformation sequences from crystal orientation data
- Open Access
- 16 February 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (7)
Molecular dynamics informed calibration of crystal plasticity critical shear stresses for the mesoscopic mechanical modeling of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) single crystal
An extension of a constitutive law for 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) is proposed with a focus on the calibration of a crystal plasticity law. TATB, a highly anisotropic energetic molecular crystal used in explosive formulations, can be subjected to high-pressure and high-temperature conditions, either under high strain-rate deformation or shock loading. The existing thermodynamically consistent model, fully informed by molecular dynamics (MD) simulations, includes nonlinear elasticity as well as a phase-field by reaction pathway formalism under large strain for the modeling of TATB behavior upon pressure as well as its well-known twinning–buckling deformation mechanism. However, it has been observed that TATB single crystal can accommodate large deformations through dislocation-mediated plasticity, a feature not included in the mesoscale model. In the present work, we take advantage of the microscopic flow surface, previously computed through MD calculations, to calibrate a crystal plasticity law, extending the capability of the continuum model currently limited to low velocity impacts and moderate strain rate. Indeed, the microscopic flow surface, defined as a 3D stress-at-first-defect-nucleation contains all information about TATB single crystal mechanical response under directional shear loading, including twinning, buckling, and plastic events. The calibration process uses differential evolution optimization to calibrate TATB basal and transverse slip systems critical stresses to reproduce the microscopic flow surface. Finally, the response of a TATB single crystal to directional loading is investigated in order to evaluate the new model.
- 16 February 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (7)
Open AccessMolecular dynamics informed calibration of crystal plasticity critical shear stresses for the mesoscopic mechanical modeling of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) single crystal
An extension of a constitutive law for 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) is proposed with a focus on the calibration of a crystal plasticity law. TATB, a highly anisotropic energetic molecular crystal used in explosive formulations, can be subjected to high-pressure and high-temperature conditions, either under high strain-rate deformation or shock loading. The existing thermodynamically consistent model, fully informed by molecular dynamics (MD) simulations, includes nonlinear elasticity as well as a phase-field by reaction pathway formalism under large strain for the modeling of TATB behavior upon pressure as well as its well-known twinning–buckling deformation mechanism. However, it has been observed that TATB single crystal can accommodate large deformations through dislocation-mediated plasticity, a feature not included in the mesoscale model. In the present work, we take advantage of the microscopic flow surface, previously computed through MD calculations, to calibrate a crystal plasticity law, extending the capability of the continuum model currently limited to low velocity impacts and moderate strain rate. Indeed, the microscopic flow surface, defined as a 3D stress-at-first-defect-nucleation contains all information about TATB single crystal mechanical response under directional shear loading, including twinning, buckling, and plastic events. The calibration process uses differential evolution optimization to calibrate TATB basal and transverse slip systems critical stresses to reproduce the microscopic flow surface. Finally, the response of a TATB single crystal to directional loading is investigated in order to evaluate the new model.
- Open Access
- 1 December 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (12)
Optical full-field strain measurement within a diamond anvil cell
Digital image correlation computations are run on optical images of iron samples within a diamond anvil cell to obtain in-plane strain components at the surface of the sample up to 17 GPa. The α-Fe → ε-Fe transition onset pressure and phase coexistence pressure domain can be identified from the evolution of the surface average of strain components. Strain fields exhibit localizations for both direct and reverse transition; they coincide with the approximate boundary locations of reversion variants inside the microstructure of a single crystal sample. The so-called DICDAC (Digital Image Correlation within a Diamond Anvil Cell) setup is then a suitable tool for the investigation of phase transformations strains under pressure. In addition, specific volumes that are deduced from strain out of the transition pressure domains agree within ΔV/V = 0.4% with the equation of state data from the literature.
- 1 December 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (12)
Open AccessOptical full-field strain measurement within a diamond anvil cell
Digital image correlation computations are run on optical images of iron samples within a diamond anvil cell to obtain in-plane strain components at the surface of the sample up to 17 GPa. The α-Fe → ε-Fe transition onset pressure and phase coexistence pressure domain can be identified from the evolution of the surface average of strain components. Strain fields exhibit localizations for both direct and reverse transition; they coincide with the approximate boundary locations of reversion variants inside the microstructure of a single crystal sample. The so-called DICDAC (Digital Image Correlation within a Diamond Anvil Cell) setup is then a suitable tool for the investigation of phase transformations strains under pressure. In addition, specific volumes that are deduced from strain out of the transition pressure domains agree within ΔV/V = 0.4% with the equation of state data from the literature.