Rafael Beltrame
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Rafael Beltrame has a total of 150 co-authors. Here are the top co-authors by number of shared publications:
- Darci Alberto Gatto
Graduate Program in Materials Science and Engineering (PPGCEM), Federal University of Pelotas (UFPel), Pelotas 96010-610, RS, Brazil
30 shared publications - Rafael de Avila Delucis
Post-Graduate Program in Materials Science and Engineering, Federal University of Pelotas, Pelotas 96010-610, Brazil
24 shared publications - Andrey Pereira Acosta
Postgraduate Program in Materials Science and Engineering (PIPE), Federal University of Paraná, Curitiba, Brazil
18 shared publications - Kelvin Techera Barbosa
Postgraduate Program in Mining, Metallurgical and Materials Engineering, Federal University of Rio Grande do Sul, Porto Alegre 91501-970, Brazil
15 shared publications - Ezequiel Gallio
Universidade Federal de Pelotas
10 shared publications - Marília Lazarotto
Universidade Federal de Pelotas
7 shared publications
Latest Publications
- Open Access
Durability of Natural Fiber-Reinforced Geopolymer and Alkali-Activated Composites: A Systematic Review of Degradation Mechanisms and Design Controlling Factors
Natural fiber-reinforced geopolymer and alkali-activated composites have emerged as promising alternatives for reducing the environmental impact of cement-based materials; however, their long-term durability remains insufficiently understood. This systematic review evaluates the durability behaviour of natural fiber-reinforced geopolymer and alkali-activated composites based on 42 studies published between 2017 and 2025, identified from 356 records retrieved from Scopus and Web of Science following the PRISMA methodology. The literature analysis reveals a significant increase in research activity in recent years, with 12 studies published in 2025 alone, indicating a growing transition from mechanical-performance evaluation toward durability-oriented design. The reviewed studies investigated multiple degradation environments, including moisture cycling, freeze–thaw exposure, chemical attack, carbonation, and thermal ageing. Across the evidence base, durability performance was mainly governed by the interaction among binder chemistry, pore structure, curing conditions, fiber characteristics, surface treatments, and exposure severity. Notably, the intrinsic surface properties of different natural fibers, including hydrophilic character, surface chemistry, and surface roughness, were found to strongly influence moisture absorption, fiber–matrix adhesion, and susceptibility to alkaline degradation, thereby contributing to distinct durability outcomes among fiber types. Fiber modification strategies and optimized matrix designs were frequently associated with improved interfacial stability and mechanical retention after ageing, whereas excessive fiber contents and poorly controlled moisture transport were recurrent factors contributing to degradation. Despite these advances, the review identified significant methodological limitations, particularly the lack of standardized durability protocols and long-term exposure assessments. Future research should prioritize harmonized testing approaches and integrated durability-based design frameworks to enable reliable prediction of service performance in natural fiber-reinforced alkali-activated composites.
Open AccessDurability of Natural Fiber-Reinforced Geopolymer and Alkali-Activated Composites: A Systematic Review of Degradation Mechanisms and Design Controlling Factors
Natural fiber-reinforced geopolymer and alkali-activated composites have emerged as promising alternatives for reducing the environmental impact of cement-based materials; however, their long-term durability remains insufficiently understood. This systematic review evaluates the durability behaviour of natural fiber-reinforced geopolymer and alkali-activated composites based on 42 studies published between 2017 and 2025, identified from 356 records retrieved from Scopus and Web of Science following the PRISMA methodology. The literature analysis reveals a significant increase in research activity in recent years, with 12 studies published in 2025 alone, indicating a growing transition from mechanical-performance evaluation toward durability-oriented design. The reviewed studies investigated multiple degradation environments, including moisture cycling, freeze–thaw exposure, chemical attack, carbonation, and thermal ageing. Across the evidence base, durability performance was mainly governed by the interaction among binder chemistry, pore structure, curing conditions, fiber characteristics, surface treatments, and exposure severity. Notably, the intrinsic surface properties of different natural fibers, including hydrophilic character, surface chemistry, and surface roughness, were found to strongly influence moisture absorption, fiber–matrix adhesion, and susceptibility to alkaline degradation, thereby contributing to distinct durability outcomes among fiber types. Fiber modification strategies and optimized matrix designs were frequently associated with improved interfacial stability and mechanical retention after ageing, whereas excessive fiber contents and poorly controlled moisture transport were recurrent factors contributing to degradation. Despite these advances, the review identified significant methodological limitations, particularly the lack of standardized durability protocols and long-term exposure assessments. Future research should prioritize harmonized testing approaches and integrated durability-based design frameworks to enable reliable prediction of service performance in natural fiber-reinforced alkali-activated composites.
- Open Access
- 17 August 2026
- Published by MDPI AG in Applied Mechanics
- Vol. 7 (3) , 70
Mechanical and Microstructural Performance of Gypsum Composites Incorporating Treated Rice Husk and Recycled Gypsum
The growing demand for more sustainable construction materials has driven the development of composites incorporating industrial and agricultural residues, contributing to the reduction in virgin raw material consumption and the valorisation of by-products. In this context, the present study investigated the influence of incorporating rice husk subjected to different chemical treatments and the partial replacement of commercial gypsum with recycled gypsum on the flexural strength, compressive strength and microstructural characteristics of gypsum-based composites. Initially, formulations containing 5 wt.% and 10 wt.% rice husk in three different conditions, untreated, treated with calcium hydroxide, and treated with acetic acid, were produced and evaluated in terms of compressive strength and flexural strength. The formulation containing 5 wt.% rice husk treated with acetic acid exhibited the best overall performance and was therefore selected for the subsequent stage of the study. In the second phase, mixtures incorporating 20 wt.%, 30 wt.% and 40 wt.% recycled gypsum, with and without the addition of 5 wt.% treated rice husk, were investigated. Furthermore, particle size distribution, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) analyses were performed. The results demonstrated that the acetic acid treatment resulted in higher flexural and compressive strength compared with the other treatment conditions evaluated. Partial replacement with recycled gypsum also yielded promising results, with the formulation containing 70 wt.% commercial gypsum and 30 wt.% recycled gypsum exhibiting the highest mechanical strength among the composites without lignocellulosic reinforcement. Microstructural characterisation revealed the preservation of the principal mineralogical phases following the recycling process, and SEM micrographs showed the incorporation of rice husk within the gypsum matrix. Overall, the combination of 30 wt.% recycled gypsum and 5 wt.% rice husk treated with acetic acid represents a technically viable alternative for the development of gypsum composites intended for non-structural applications in the construction industry, while promoting the beneficial utilisation of waste materials.
- 17 August 2026
- Published by MDPI AG in Applied Mechanics
- Vol. 7 (3) , 70
Open AccessMechanical and Microstructural Performance of Gypsum Composites Incorporating Treated Rice Husk and Recycled Gypsum
The growing demand for more sustainable construction materials has driven the development of composites incorporating industrial and agricultural residues, contributing to the reduction in virgin raw material consumption and the valorisation of by-products. In this context, the present study investigated the influence of incorporating rice husk subjected to different chemical treatments and the partial replacement of commercial gypsum with recycled gypsum on the flexural strength, compressive strength and microstructural characteristics of gypsum-based composites. Initially, formulations containing 5 wt.% and 10 wt.% rice husk in three different conditions, untreated, treated with calcium hydroxide, and treated with acetic acid, were produced and evaluated in terms of compressive strength and flexural strength. The formulation containing 5 wt.% rice husk treated with acetic acid exhibited the best overall performance and was therefore selected for the subsequent stage of the study. In the second phase, mixtures incorporating 20 wt.%, 30 wt.% and 40 wt.% recycled gypsum, with and without the addition of 5 wt.% treated rice husk, were investigated. Furthermore, particle size distribution, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) analyses were performed. The results demonstrated that the acetic acid treatment resulted in higher flexural and compressive strength compared with the other treatment conditions evaluated. Partial replacement with recycled gypsum also yielded promising results, with the formulation containing 70 wt.% commercial gypsum and 30 wt.% recycled gypsum exhibiting the highest mechanical strength among the composites without lignocellulosic reinforcement. Microstructural characterisation revealed the preservation of the principal mineralogical phases following the recycling process, and SEM micrographs showed the incorporation of rice husk within the gypsum matrix. Overall, the combination of 30 wt.% recycled gypsum and 5 wt.% rice husk treated with acetic acid represents a technically viable alternative for the development of gypsum composites intended for non-structural applications in the construction industry, while promoting the beneficial utilisation of waste materials.
- Open Access
- 1 August 2026
- Published by Springer Nature in Cellulose
- Vol. 33 (12) , 7379-7393
Biorefinery applied to the synthesis and characterization of bioactive wound dressings based on cellulose nanofibrils and various plant extracts
- 1 August 2026
- Published by Springer Nature in Cellulose
- Vol. 33 (12) , 7379-7393
Open AccessBiorefinery applied to the synthesis and characterization of bioactive wound dressings based on cellulose nanofibrils and various plant extracts
- Open Access
- 31 July 2026
- Published by MDPI AG in Construction Materials
- Vol. 6 (4) , 47
Performance of Sanitation Mortars Against Chloride Ion Migration in Contaminated Historical Masonry
This study evaluates the performance of a rehabilitation mortar in controlling chloride ion migration in artificially contaminated ceramic masonry under controlled laboratory conditions. Coatings with thicknesses of 3 cm, 5 cm, and 7 cm were applied to ceramic brick substrates saturated with saline solution and exposed to accelerated contamination. Chloride concentration profiles were determined by potentiometric titration after 120 days of curing. The results showed that the rehabilitation mortar effectively retained soluble salts within its porous matrix, limiting their migration toward the surface. The 3 cm coating provided satisfactory salt retention and reduced the potential for surface efflorescence. Among the evaluated thicknesses, the 5 cm coating exhibited the most favorable chloride distribution, characterized by a pronounced concentration peak at the substrate–mortar interface followed by a sharp decrease toward the external surface, indicating the formation of an effective chloride retention zone. In contrast, the 7 cm coating showed a more homogeneous ion distribution but a less defined retention profile. The results demonstrate the potential of the rehabilitation mortar to act as a protective barrier under controlled laboratory conditions using artificially contaminated ceramic substrates. These findings provide experimental evidence that may support future applications in salt-contaminated historic masonry, although further validation under real field conditions is still required.
- 31 July 2026
- Published by MDPI AG in Construction Materials
- Vol. 6 (4) , 47
Open AccessPerformance of Sanitation Mortars Against Chloride Ion Migration in Contaminated Historical Masonry
This study evaluates the performance of a rehabilitation mortar in controlling chloride ion migration in artificially contaminated ceramic masonry under controlled laboratory conditions. Coatings with thicknesses of 3 cm, 5 cm, and 7 cm were applied to ceramic brick substrates saturated with saline solution and exposed to accelerated contamination. Chloride concentration profiles were determined by potentiometric titration after 120 days of curing. The results showed that the rehabilitation mortar effectively retained soluble salts within its porous matrix, limiting their migration toward the surface. The 3 cm coating provided satisfactory salt retention and reduced the potential for surface efflorescence. Among the evaluated thicknesses, the 5 cm coating exhibited the most favorable chloride distribution, characterized by a pronounced concentration peak at the substrate–mortar interface followed by a sharp decrease toward the external surface, indicating the formation of an effective chloride retention zone. In contrast, the 7 cm coating showed a more homogeneous ion distribution but a less defined retention profile. The results demonstrate the potential of the rehabilitation mortar to act as a protective barrier under controlled laboratory conditions using artificially contaminated ceramic substrates. These findings provide experimental evidence that may support future applications in salt-contaminated historic masonry, although further validation under real field conditions is still required.
- 3 July 2026
- Published by National Inquiry Services Center (NISC) in Southern Forests: a Journal of Forest Science
- Vol. 88 (3) , 274-283
Technological characterisation of second selective thinning wood of Toona ciliata (Meliaceae) – Part II
- 3 July 2026
- Published by National Inquiry Services Center (NISC) in Southern Forests: a Journal of Forest Science
- Vol. 88 (3) , 274-283
Technological characterisation of second selective thinning wood of Toona ciliata (Meliaceae) – Part II
- Open Access
A Study on Sampling Sufficiency for Morphological Properties of Polyurethane Foams
This study investigates the sampling sufficiency required for accurately characterizing the morphological properties of rigid polyurethane foams across three distinct regions: core, crown, and lateral edge. A total of 200 individual cells were analyzed from 30 SEM micrographs, enabling the quantification of cell length, cell width, anisotropy index, linear cell density, and shape index. Average cell length ranged from 715 to 763 μm, while cell width varied between 386 and 531 μm depending on the region. The anisotropy index increased from 0.186 in the core to 0.289 in the lateral edge, indicating progressively more elongated cells. Linear cell density showed a marked decrease from 0.062 in the core to 0.001 in the crown, reflecting differences in cellular packing. Shape index values remained relatively stable, confirming its lower sensitivity to structural variations. Monte Carlo simulations were employed to evaluate sampling sufficiency for sample sizes ranging from 2 to 30. Results demonstrated that optimal sample sizes varied with foam region and parameter: 16 cells were sufficient for core and lateral regions, whereas up to 22 cells were required for the crown to capture higher structural heterogeneity. For anisotropy and shape indices, sufficient sampling ranged between 13 and 20 cells depending on the region. The results confirm that the core exhibits lower variability (CoV for cell length: 29.1%) compared to the crown (36.4%) and lateral edge (34.9%), supporting its more homogeneous structure. However, exclusive sampling from the core may lead to biased characterization, as crown and lateral regions display significantly higher variability in both geometry and orientation. These findings establish quantitative guidelines for sampling strategies in polyurethane foam morphology, contributing to improved reproducibility and reliability in structure–property investigations of cellular materials.
Open AccessA Study on Sampling Sufficiency for Morphological Properties of Polyurethane Foams
This study investigates the sampling sufficiency required for accurately characterizing the morphological properties of rigid polyurethane foams across three distinct regions: core, crown, and lateral edge. A total of 200 individual cells were analyzed from 30 SEM micrographs, enabling the quantification of cell length, cell width, anisotropy index, linear cell density, and shape index. Average cell length ranged from 715 to 763 μm, while cell width varied between 386 and 531 μm depending on the region. The anisotropy index increased from 0.186 in the core to 0.289 in the lateral edge, indicating progressively more elongated cells. Linear cell density showed a marked decrease from 0.062 in the core to 0.001 in the crown, reflecting differences in cellular packing. Shape index values remained relatively stable, confirming its lower sensitivity to structural variations. Monte Carlo simulations were employed to evaluate sampling sufficiency for sample sizes ranging from 2 to 30. Results demonstrated that optimal sample sizes varied with foam region and parameter: 16 cells were sufficient for core and lateral regions, whereas up to 22 cells were required for the crown to capture higher structural heterogeneity. For anisotropy and shape indices, sufficient sampling ranged between 13 and 20 cells depending on the region. The results confirm that the core exhibits lower variability (CoV for cell length: 29.1%) compared to the crown (36.4%) and lateral edge (34.9%), supporting its more homogeneous structure. However, exclusive sampling from the core may lead to biased characterization, as crown and lateral regions display significantly higher variability in both geometry and orientation. These findings establish quantitative guidelines for sampling strategies in polyurethane foam morphology, contributing to improved reproducibility and reliability in structure–property investigations of cellular materials.
- Open Access
- 15 August 2025
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- p. e89663
Explorando o potencial da madeira de Pittosporum undulatum: uma análise abrangente das principais propriedades tecnológicas
A proliferação de espécies exóticas invasoras (EEIs) como o Pittosporum undulatum representa um grande desafio para a estabilidade dos ecossistemas naturais. Sua rápida disseminação torna a erradicação e restauração de áreas afetadas inviáveis devido aos altos custos de manejo. Este estudo avalia o potencial de agregar valor à madeira de P. undulatum, buscando formas de transformá-la em um recurso valioso para comunidades locais. Para isso, cinco árvores adultas foram analisadas quanto a suas propriedades químicas, térmicas, caloríficas, físicas e mecânicas. A análise revelou 2,35% de extrativos, 25,56% de lignina e 0,92% de cinzas, com valor calorífico de 4561,2 kcal/kg. Com densidade específica aparente de 0,655 g/cm³, as propriedades mecânicas incluem módulo de ruptura (MOR) de 58,27 MPa. A dureza Janka perpendicular foi de 1841 kgf/cm². A madeira do P. undulatum mostrou propriedades comparáveis a madeiras comercialmente disponíveis, sugerindo viabilidade para aplicações energéticas e na indústria moveleira, com algumas limitações. Os resultados indicam a possibilidade de integrar seu manejo com retornos financeiros.
- 15 August 2025
- Published by Universidade Federal de Santa Maria in Ciência Florestal
- p. e89663
Open AccessExplorando o potencial da madeira de Pittosporum undulatum: uma análise abrangente das principais propriedades tecnológicas
A proliferação de espécies exóticas invasoras (EEIs) como o Pittosporum undulatum representa um grande desafio para a estabilidade dos ecossistemas naturais. Sua rápida disseminação torna a erradicação e restauração de áreas afetadas inviáveis devido aos altos custos de manejo. Este estudo avalia o potencial de agregar valor à madeira de P. undulatum, buscando formas de transformá-la em um recurso valioso para comunidades locais. Para isso, cinco árvores adultas foram analisadas quanto a suas propriedades químicas, térmicas, caloríficas, físicas e mecânicas. A análise revelou 2,35% de extrativos, 25,56% de lignina e 0,92% de cinzas, com valor calorífico de 4561,2 kcal/kg. Com densidade específica aparente de 0,655 g/cm³, as propriedades mecânicas incluem módulo de ruptura (MOR) de 58,27 MPa. A dureza Janka perpendicular foi de 1841 kgf/cm². A madeira do P. undulatum mostrou propriedades comparáveis a madeiras comercialmente disponíveis, sugerindo viabilidade para aplicações energéticas e na indústria moveleira, com algumas limitações. Os resultados indicam a possibilidade de integrar seu manejo com retornos financeiros.
- 6 August 2025
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 83 (4) , 1-13
Eco-friendly laminates for extreme environments: potential for application in high durability structures
- 6 August 2025
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 83 (4) , 1-13
Eco-friendly laminates for extreme environments: potential for application in high durability structures
- 30 June 2025
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 27 (12) , 8917-8930
Sustainable bricks from dry and calcined water treatment plant sludge
- 30 June 2025
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 27 (12) , 8917-8930
Sustainable bricks from dry and calcined water treatment plant sludge
- Open Access
Biogenic Synthesis of Copper and Zinc Oxide from Eucalyptus dunnii Leaves for Pinus elliottii Wood Preservation
The present study aims to evaluate the mechanical properties, colorimetric characteristics, and decay resistance of Pinus elliottii woods treated with oxides synthesized via green chemistry. For this purpose, an aqueous extract from Eucalyptus dunnii leaves was used to synthesize particles based on copper- and zinc-based oxides, as well as a binary oxide system (CuO/ZnO). Sodium polyacrylate was employed as a dispersant, impregnating the oxides into the wood through a horizontal autoclave using a modified Bethell process, assisted by a compressor, applying a pressure of 0.8 MPa for 30 min. The exposure to weathering aging did not significantly alter the mechanical properties of the samples, but it caused the leaching of particles from the treated wood surface, as shown by colorimetric results. Regarding the decay resistance, the copper-based oxide proved to be the most effective treatment against Trametes versicolor (a white-rot fungus), reducing mass loss down to 1.2%. The CuO/ZnO formulation reduced the mass loss caused by Gloeophyllum trabeum to 1.1%, while the zinc oxide showed minimal efficacy. Thus, oxides synthesized via green chemistry using aqueous leaf extracts and mild thermal conditions for synthesis and calcination proved effective in enhancing the wood resistance against biotic deterioration agents.
Open AccessBiogenic Synthesis of Copper and Zinc Oxide from Eucalyptus dunnii Leaves for Pinus elliottii Wood Preservation
The present study aims to evaluate the mechanical properties, colorimetric characteristics, and decay resistance of Pinus elliottii woods treated with oxides synthesized via green chemistry. For this purpose, an aqueous extract from Eucalyptus dunnii leaves was used to synthesize particles based on copper- and zinc-based oxides, as well as a binary oxide system (CuO/ZnO). Sodium polyacrylate was employed as a dispersant, impregnating the oxides into the wood through a horizontal autoclave using a modified Bethell process, assisted by a compressor, applying a pressure of 0.8 MPa for 30 min. The exposure to weathering aging did not significantly alter the mechanical properties of the samples, but it caused the leaching of particles from the treated wood surface, as shown by colorimetric results. Regarding the decay resistance, the copper-based oxide proved to be the most effective treatment against Trametes versicolor (a white-rot fungus), reducing mass loss down to 1.2%. The CuO/ZnO formulation reduced the mass loss caused by Gloeophyllum trabeum to 1.1%, while the zinc oxide showed minimal efficacy. Thus, oxides synthesized via green chemistry using aqueous leaf extracts and mild thermal conditions for synthesis and calcination proved effective in enhancing the wood resistance against biotic deterioration agents.