Raul Santovena
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Raul Santovena has a total of 616 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Dafonte
CITIC, Universidade da Corua, A Corua, Spain
16 shared publications - Minia Manteiga
University of A Coruña
14 shared publications - Daniel Garabato
Center for Information and Communications Technologies Research (CITIC), Department of Computer Science and Information Technologies, University of A Coruña, 15071 A Coruña, Spain
10 shared publications - Ana Ulla
University of Vigo
8 shared publications - Marco Antonio Álvarez
Universidade da Coruña - Campus da Coruña
8 shared publications - Alejandra Recio-Blanco
Université Côte d’Azur, Observatoire de la Côte d’Azur, CNRS, Laboratoire Lagrange
7 shared publications
Latest Publications
- Open Access
- 20 March 2026
- Published by Elsevier in SSRN Electronic Journal
GANDALF: Generative Adversarial Networks for Disentangling And Learning Framework
Neural networks are widely used in astronomical spectroscopy to analyse stellar spectra, which encode rich information about the physical and chemical properties of stars. In tasks like identifying stellar chemical abundance patterns (chemical tagging), performance improves when the parameters of interest are isolated and the influence of others is reduced. With this objective, we present GANDALF (Generative Adversarial Networks for Disentangling And Learning Framework), a software framework specifically designed to tackle this problem through the use of generative adversarial networks. By projecting the stellar spectra into a latent space, where the influence of one or several physicochemical properties is reduced while others are emphasised, it becomes possible to amplify the information associated with specific properties. Moreover, our software can be used to reconstruct new spectra by modifying the disentangled parameters, working as a generative model. Additionally, it includes an interactive visualizer that allows users to explore the data and manually modify its disentangled parameters. The effectiveness of GANDALF has been demonstrated using data from two broadly used astronomical surveys, the Apache Point Observatory Galactic Evolution Experiment (APOGEE) and Gaia's Radial Velocity Spectrometer (RVS), where it yielded low coefficients of determination (R2 = 0.2) for the parameters that were suppressed, while preserving high values for those that were retained.
- 20 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessGANDALF: Generative Adversarial Networks for Disentangling And Learning Framework
Neural networks are widely used in astronomical spectroscopy to analyse stellar spectra, which encode rich information about the physical and chemical properties of stars. In tasks like identifying stellar chemical abundance patterns (chemical tagging), performance improves when the parameters of interest are isolated and the influence of others is reduced. With this objective, we present GANDALF (Generative Adversarial Networks for Disentangling And Learning Framework), a software framework specifically designed to tackle this problem through the use of generative adversarial networks. By projecting the stellar spectra into a latent space, where the influence of one or several physicochemical properties is reduced while others are emphasised, it becomes possible to amplify the information associated with specific properties. Moreover, our software can be used to reconstruct new spectra by modifying the disentangled parameters, working as a generative model. Additionally, it includes an interactive visualizer that allows users to explore the data and manually modify its disentangled parameters. The effectiveness of GANDALF has been demonstrated using data from two broadly used astronomical surveys, the Apache Point Observatory Galactic Evolution Experiment (APOGEE) and Gaia's Radial Velocity Spectrometer (RVS), where it yielded low coefficients of determination (R2 = 0.2) for the parameters that were suppressed, while preserving high values for those that were retained.
- Open Access
- 8 March 2025
- Published by Elsevier in Applied Soft Computing
- Vol. 174
A method based on Generative Adversarial Networks for disentangling physical and chemical properties of stars in astronomical spectra
- 8 March 2025
- Published by Elsevier in Applied Soft Computing
- Vol. 174
Open AccessA method based on Generative Adversarial Networks for disentangling physical and chemical properties of stars in astronomical spectra
- Open Access
- 25 February 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 694, A326
Disentangling stellar atmospheric parameters in astronomical spectra using generative adversarial neural networks
Context. The rapid expansion of large-scale spectroscopic surveys has highlighted the need to use automatic methods to extract information about the properties of stars with the greatest efficiency and accuracy, and also to optimise the use of computational resources. Aims. We developed a method based on generative adversarial networks (GANs) to disentangle the physical (effective temperature and gravity) and chemical (metallicity and overabundance of α elements with respect to iron) atmospheric properties in astronomical spectra. Using a projection of the stellar spectra, commonly called latent space, in which the contribution due to one or several main stellar physicochemical properties is minimised while others are enhanced, it was possible to maximise the information related to certain properties. This could then be extracted using artificial neural networks (ANNs) as regressors, with a higher accuracy than a reference method based on the use of ANNs that had been trained with the original spectra. Methods. Our model utilises auto-encoders, comprising two ANNs: an encoder and a decoder that transform input data into a low-dimensional representation known as latent space. It also uses discriminators, which are additional neural networks aimed at transforming the traditional auto-encoder training into an adversarial approach. This is done to reinforce the astrophysical parameters or disentangle them from the latent space. We describe our Generative Adversarial Networks for Disentangling and Learning Framework (GANDALF) tool in this article. It was developed to define, train, and test our GAN model with a web framework to show visually how the disentangling algorithm works. It is open to the community in Github. Results. We demonstrate the performance of our approach for retrieving atmospheric stellar properties from spectra using Gaia Radial Velocity Spectrograph (RVS) data from DR3. We used a data-driven perspective and obtained very competitive values, all within the literature errors, and with the advantage of an important dimensionality reduction of the data to be processed.
- 25 February 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 694, A326
Open AccessDisentangling stellar atmospheric parameters in astronomical spectra using generative adversarial neural networks
Context. The rapid expansion of large-scale spectroscopic surveys has highlighted the need to use automatic methods to extract information about the properties of stars with the greatest efficiency and accuracy, and also to optimise the use of computational resources. Aims. We developed a method based on generative adversarial networks (GANs) to disentangle the physical (effective temperature and gravity) and chemical (metallicity and overabundance of α elements with respect to iron) atmospheric properties in astronomical spectra. Using a projection of the stellar spectra, commonly called latent space, in which the contribution due to one or several main stellar physicochemical properties is minimised while others are enhanced, it was possible to maximise the information related to certain properties. This could then be extracted using artificial neural networks (ANNs) as regressors, with a higher accuracy than a reference method based on the use of ANNs that had been trained with the original spectra. Methods. Our model utilises auto-encoders, comprising two ANNs: an encoder and a decoder that transform input data into a low-dimensional representation known as latent space. It also uses discriminators, which are additional neural networks aimed at transforming the traditional auto-encoder training into an adversarial approach. This is done to reinforce the astrophysical parameters or disentangle them from the latent space. We describe our Generative Adversarial Networks for Disentangling and Learning Framework (GANDALF) tool in this article. It was developed to define, train, and test our GAN model with a web framework to show visually how the disentangling algorithm works. It is open to the community in Github. Results. We demonstrate the performance of our approach for retrieving atmospheric stellar properties from spectra using Gaia Radial Velocity Spectrograph (RVS) data from DR3. We used a data-driven perspective and obtained very competitive values, all within the literature errors, and with the advantage of an important dimensionality reduction of the data to be processed.
- Open Access
- 15 November 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 691, A223
Advanced classification of hot subdwarf binaries using artificial intelligence techniques and Gaia DR3 data
Context. Hot subdwarf stars are compact blue evolved objects, burning helium in their cores surrounded by a tiny hydrogen envelope. In the Hertzsprung-Russell Diagram they are located by the blue end of the Horizontal Branch. Most models agree on a quite probable common envelope binary evolution scenario in the Red Giant phase. However, the current binarity rate for these objects is yet unsolved, but key, question in this field. Aims. This study aims to develop a novel classification method for identifying hot subdwarf binaries within large datasets using Artificial Intelligence techniques and data from the third Gaia data release (GDR3). The results will be compared with those obtained previously using Virtual Observatory techniques on coincident samples. Methods. The methods used for hot subdwarf binary classification include supervised and unsupervised machine learning techniques. Specifically, we have used Support Vector Machines (SVM) to classify 3084 hot subdwarf stars based on their colour-magnitude properties. Among these, 2815 objects have Gaia DR3 BP/RP spectra, which were classified using Self-Organizing Maps (SOM) and Convolutional Neural Networks (CNN). In order to ensure spectral quality, previously to SOM and CNN classification, our 2815 BP/RP set were pre-analysed with two different approaches: the cosine similarity technique and the Uniform Manifold Approximation and Projection (UMAP) technique. Additional analysis onto a golden sample of 88 well-defined objects, is also presented. Results. The findings demonstrate a high agreement level (∼70–90%) with the classifications from the Virtual Observatory Sed Analyzer (VOSA) tool. This shows that the SVM, SOM, and CNN methods effectively classify sources with an accuracy comparable to human inspection or non-AI techniques. Notably, SVM in a radial basis function achieves 70.97% reproducibility for binary targets using photometry, and CNN reaches 84.94% for binary detection using spectroscopy. We also found that the single–binary differences are especially observable on the infrared flux in our Gaia DR3 BP/BR spectra, at wavelengths larger than ∼700 nm. Conclusions. We find that all the methods used are in fairly good agreement and are particularly effective to discern between single and binary systems. The agreement is also consistent with the results previously obtained with VOSA. In global terms, considering all quality metrics, CNN is the method that provides the best accuracy. The methods also appear effective for detecting peculiarities in the spectra. While promising, challenges in dealing with uncertain compositions highlight the need for caution, suggesting further research is needed to refine techniques and enhance automated classification reliability, particularly for large-scale surveys.
- 15 November 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 691, A223
Open AccessAdvanced classification of hot subdwarf binaries using artificial intelligence techniques and Gaia DR3 data
Context. Hot subdwarf stars are compact blue evolved objects, burning helium in their cores surrounded by a tiny hydrogen envelope. In the Hertzsprung-Russell Diagram they are located by the blue end of the Horizontal Branch. Most models agree on a quite probable common envelope binary evolution scenario in the Red Giant phase. However, the current binarity rate for these objects is yet unsolved, but key, question in this field. Aims. This study aims to develop a novel classification method for identifying hot subdwarf binaries within large datasets using Artificial Intelligence techniques and data from the third Gaia data release (GDR3). The results will be compared with those obtained previously using Virtual Observatory techniques on coincident samples. Methods. The methods used for hot subdwarf binary classification include supervised and unsupervised machine learning techniques. Specifically, we have used Support Vector Machines (SVM) to classify 3084 hot subdwarf stars based on their colour-magnitude properties. Among these, 2815 objects have Gaia DR3 BP/RP spectra, which were classified using Self-Organizing Maps (SOM) and Convolutional Neural Networks (CNN). In order to ensure spectral quality, previously to SOM and CNN classification, our 2815 BP/RP set were pre-analysed with two different approaches: the cosine similarity technique and the Uniform Manifold Approximation and Projection (UMAP) technique. Additional analysis onto a golden sample of 88 well-defined objects, is also presented. Results. The findings demonstrate a high agreement level (∼70–90%) with the classifications from the Virtual Observatory Sed Analyzer (VOSA) tool. This shows that the SVM, SOM, and CNN methods effectively classify sources with an accuracy comparable to human inspection or non-AI techniques. Notably, SVM in a radial basis function achieves 70.97% reproducibility for binary targets using photometry, and CNN reaches 84.94% for binary detection using spectroscopy. We also found that the single–binary differences are especially observable on the infrared flux in our Gaia DR3 BP/BR spectra, at wavelengths larger than ∼700 nm. Conclusions. We find that all the methods used are in fairly good agreement and are particularly effective to discern between single and binary systems. The agreement is also consistent with the results previously obtained with VOSA. In global terms, considering all quality metrics, CNN is the method that provides the best accuracy. The methods also appear effective for detecting peculiarities in the spectra. While promising, challenges in dealing with uncertain compositions highlight the need for caution, suggesting further research is needed to refine techniques and enhance automated classification reliability, particularly for large-scale surveys.
- Top Cited PapersOpen Access
- 27 May 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 686, L2
Discovery of a dormant 33 solar-mass black hole in pre-release Gaia astrometry
Context. Gravitational waves from black-hole (BH) merging events have revealed a population of extra-galactic BHs residing in short-period binaries with masses that are higher than expected based on most stellar evolution models – and also higher than known stellar-origin black holes in our Galaxy. It has been proposed that those high-mass BHs are the remnants of massive metal-poor stars. Aims. Gaia astrometry is expected to uncover many Galactic wide-binary systems containing dormant BHs, which may not have been detected before. The study of this population will provide new information on the BH-mass distribution in binaries and shed light on their formation mechanisms and progenitors. Methods. As part of the validation efforts in preparation for the fourth Gaia data release (DR4), we analysed the preliminary astrometric binary solutions, obtained by the Gaia Non-Single Star pipeline, to verify their significance and to minimise false-detection rates in high-mass-function orbital solutions. Results. The astrometric binary solution of one source, Gaia BH3, implies the presence of a 32.70 ± 0.82 M⊙ BH in a binary system with a period of 11.6 yr. Gaia radial velocities independently validate the astrometric orbit. Broad-band photometric and spectroscopic data show that the visible component is an old, very metal-poor giant of the Galactic halo, at a distance of 590 pc. Conclusions. The BH in the Gaia BH3 system is more massive than any other Galactic stellar-origin BH known thus far. The low metallicity of the star companion supports the scenario that metal-poor massive stars are progenitors of the high-mass BHs detected by gravitational-wave telescopes. The Galactic orbit of the system and its metallicity indicate that it might belong to the Sequoia halo substructure. Alternatively, and more plausibly, it could belong to the ED-2 stream, which likely originated from a globular cluster that had been disrupted by the Milky Way.
- 27 May 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 686, L2
Top Cited PapersOpen AccessDiscovery of a dormant 33 solar-mass black hole in pre-release Gaia astrometry
Context. Gravitational waves from black-hole (BH) merging events have revealed a population of extra-galactic BHs residing in short-period binaries with masses that are higher than expected based on most stellar evolution models – and also higher than known stellar-origin black holes in our Galaxy. It has been proposed that those high-mass BHs are the remnants of massive metal-poor stars. Aims. Gaia astrometry is expected to uncover many Galactic wide-binary systems containing dormant BHs, which may not have been detected before. The study of this population will provide new information on the BH-mass distribution in binaries and shed light on their formation mechanisms and progenitors. Methods. As part of the validation efforts in preparation for the fourth Gaia data release (DR4), we analysed the preliminary astrometric binary solutions, obtained by the Gaia Non-Single Star pipeline, to verify their significance and to minimise false-detection rates in high-mass-function orbital solutions. Results. The astrometric binary solution of one source, Gaia BH3, implies the presence of a 32.70 ± 0.82 M⊙ BH in a binary system with a period of 11.6 yr. Gaia radial velocities independently validate the astrometric orbit. Broad-band photometric and spectroscopic data show that the visible component is an old, very metal-poor giant of the Galactic halo, at a distance of 590 pc. Conclusions. The BH in the Gaia BH3 system is more massive than any other Galactic stellar-origin BH known thus far. The low metallicity of the star companion supports the scenario that metal-poor massive stars are progenitors of the high-mass BHs detected by gravitational-wave telescopes. The Galactic orbit of the system and its metallicity indicate that it might belong to the Sequoia halo substructure. Alternatively, and more plausibly, it could belong to the ED-2 stream, which likely originated from a globular cluster that had been disrupted by the Milky Way.
- Open Access
- 17 May 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 685, A130
GaiaFocused Product Release: A catalogue of sources around quasars to search for strongly lensed quasars
Context. Strongly lensed quasars are fundamental sources for cosmology. TheGaiaspace mission covers the entire sky with the unprecedented resolution of 0.18″ in the optical, making it an ideal instrument to search for gravitational lenses down to the limiting magnitude of 21. Nevertheless, the previousGaiaData Releases are known to be incomplete for small angular separations such as those expected for most lenses.Aims. We present the Data Processing and Analysis Consortium GravLens pipeline, which was built to analyse allGaiadetections around quasars and to cluster them into sources, thus producing a catalogue of secondary sources around each quasar. We analysed the resulting catalogue to produce scores that indicate source configurations that are compatible with strongly lensed quasars.Methods. GravLens uses the DBSCAN unsupervised clustering algorithm to detect sources around quasars. The resulting catalogue of multiplets is then analysed with several methods to identify potential gravitational lenses. We developed and applied an outlier scoring method, a comparison between the average BP and RP spectra of the components, and we also used an extremely randomised tree algorithm. These methods produce scores to identify the most probable configurations and to establish a list of lens candidates.Results. We analysed the environment of 3 760 032 quasars. A total of 4 760 920 sources, including the quasars, were found within 6″ of the quasar positions. This list is given in theGaiaarchive. In 87% of cases, the quasar remains a single source, and in 501 385 cases neighbouring sources were detected. We propose a list of 381 lensed candidates, of which we identified 49 as the most promising ones. Beyond these candidates, the associate tables in this Focused Product Release allow the entire community to explore the uniqueGaiadata for strong lensing studies further.
- 17 May 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 685, A130
Open AccessGaiaFocused Product Release: A catalogue of sources around quasars to search for strongly lensed quasars
Context. Strongly lensed quasars are fundamental sources for cosmology. TheGaiaspace mission covers the entire sky with the unprecedented resolution of 0.18″ in the optical, making it an ideal instrument to search for gravitational lenses down to the limiting magnitude of 21. Nevertheless, the previousGaiaData Releases are known to be incomplete for small angular separations such as those expected for most lenses.Aims. We present the Data Processing and Analysis Consortium GravLens pipeline, which was built to analyse allGaiadetections around quasars and to cluster them into sources, thus producing a catalogue of secondary sources around each quasar. We analysed the resulting catalogue to produce scores that indicate source configurations that are compatible with strongly lensed quasars.Methods. GravLens uses the DBSCAN unsupervised clustering algorithm to detect sources around quasars. The resulting catalogue of multiplets is then analysed with several methods to identify potential gravitational lenses. We developed and applied an outlier scoring method, a comparison between the average BP and RP spectra of the components, and we also used an extremely randomised tree algorithm. These methods produce scores to identify the most probable configurations and to establish a list of lens candidates.Results. We analysed the environment of 3 760 032 quasars. A total of 4 760 920 sources, including the quasars, were found within 6″ of the quasar positions. This list is given in theGaiaarchive. In 87% of cases, the quasar remains a single source, and in 501 385 cases neighbouring sources were detected. We propose a list of 381 lensed candidates, of which we identified 49 as the most promising ones. Beyond these candidates, the associate tables in this Focused Product Release allow the entire community to explore the uniqueGaiadata for strong lensing studies further.
- Open Access
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A36
Gaia Focused Product Release: Radial velocity time series of long-period variables
Context. The third Gaia Data Release (DR3) provided photometric time series of more than 2 million long-period variable (LPV) candidates. Anticipating the publication of full radial-velocity data planned with Data Release 4, this Focused Product Release (FPR) provides radial-velocity time series for a selection of LPV candidates with high-quality observations. Aims. We describe the production and content of the Gaia catalog of LPV radial-velocity time series, and the methods used to compute the variability parameters published as part of the Gaia FPR. Methods. Starting from the DR3 catalog of LPV candidates, we applied several filters to construct a sample of sources with high-quality radial-velocity measurements. We modeled their radial-velocity and photometric time series to derive their periods and amplitudes, and further refined the sample by requiring compatibility between the radial-velocity period and at least one of the G, GBP, or GRP photometric periods. Results. The catalog includes radial-velocity time series and variability parameters for 9614 sources in the magnitude range 6 ≲ G/mag ≲ 14, including a flagged top-quality subsample of 6093 stars whose radial-velocity periods are fully compatible with the values derived from the G, GBP, and GRP photometric time series. The radial-velocity time series contain a mean of 24 measurements per source taken unevenly over a duration of about three years. We identify the great majority of the sources (88%) as genuine LPV candidates, with about half of them showing a pulsation period and the other half displaying a long secondary period. The remaining 12% of the catalog consists of candidate ellipsoidal binaries. Quality checks against radial velocities available in the literature show excellent agreement. We provide some illustrative examples and cautionary remarks. Conclusions. The publication of radial-velocity time series for almost ten thousand LPV candidates constitutes, by far, the largest such database available to date in the literature. The availability of simultaneous photometric measurements gives a unique added value to the Gaia catalog.
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A36
Open AccessGaia Focused Product Release: Radial velocity time series of long-period variables
Context. The third Gaia Data Release (DR3) provided photometric time series of more than 2 million long-period variable (LPV) candidates. Anticipating the publication of full radial-velocity data planned with Data Release 4, this Focused Product Release (FPR) provides radial-velocity time series for a selection of LPV candidates with high-quality observations. Aims. We describe the production and content of the Gaia catalog of LPV radial-velocity time series, and the methods used to compute the variability parameters published as part of the Gaia FPR. Methods. Starting from the DR3 catalog of LPV candidates, we applied several filters to construct a sample of sources with high-quality radial-velocity measurements. We modeled their radial-velocity and photometric time series to derive their periods and amplitudes, and further refined the sample by requiring compatibility between the radial-velocity period and at least one of the G, GBP, or GRP photometric periods. Results. The catalog includes radial-velocity time series and variability parameters for 9614 sources in the magnitude range 6 ≲ G/mag ≲ 14, including a flagged top-quality subsample of 6093 stars whose radial-velocity periods are fully compatible with the values derived from the G, GBP, and GRP photometric time series. The radial-velocity time series contain a mean of 24 measurements per source taken unevenly over a duration of about three years. We identify the great majority of the sources (88%) as genuine LPV candidates, with about half of them showing a pulsation period and the other half displaying a long secondary period. The remaining 12% of the catalog consists of candidate ellipsoidal binaries. Quality checks against radial velocities available in the literature show excellent agreement. We provide some illustrative examples and cautionary remarks. Conclusions. The publication of radial-velocity time series for almost ten thousand LPV candidates constitutes, by far, the largest such database available to date in the literature. The availability of simultaneous photometric measurements gives a unique added value to the Gaia catalog.
- Open Access
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A35
Gaia Focused Product Release: Sources from Service Interface Function image analysis
Context. Gaia’s readout window strategy is challenged by very dense fields in the sky. Therefore, in addition to standard Gaia observations, full Sky Mapper (SM) images were recorded for nine selected regions in the sky. A new software pipeline exploits these Service Interface Function (SIF) images of crowded fields (CFs), making use of the availability of the full two-dimensional (2D) information. This new pipeline produced half a million additional Gaia sources in the region of the omega Centauri (ω Cen) cluster, which are published with this Focused Product Release. We discuss the dedicated SIF CF data reduction pipeline, validate its data products, and introduce their Gaia archive table. Aims. Our aim is to improve the completeness of the Gaia source inventory in a very dense region in the sky, ω Cen. Methods. An adapted version of Gaia’s Source Detection and Image Parameter Determination software located sources in the 2D SIF CF images. These source detections were clustered and assigned to new SIF CF or existing Gaia sources by Gaia s cross-match software. For the new sources, astrometry was calculated using the Astrometric Global Iterative Solution software, and photometry was obtained in the Gaia DR3 reference system. We validated the results by comparing them to the public Gaia DR3 catalogue and external Hubble Space Telescope data. Results. With this Focused Product Release, 526 587 new sources have been added to the Gaia catalogue in ω Cen. Apart from positions and brightnesses, the additional catalogue contains parallaxes and proper motions, but no meaningful colour information. While SIF CF source parameters generally have a lower precision than nominal Gaia sources, in the cluster centre they increase the depth of the combined catalogue by three magnitudes and improve the source density by a factor of ten. Conclusions. This first SIF CF data publication already adds great value to the Gaia catalogue. It demonstrates what to expect for the fourth Gaia catalogue, which will contain additional sources for all nine SIF CF regions.
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A35
Open AccessGaia Focused Product Release: Sources from Service Interface Function image analysis
Context. Gaia’s readout window strategy is challenged by very dense fields in the sky. Therefore, in addition to standard Gaia observations, full Sky Mapper (SM) images were recorded for nine selected regions in the sky. A new software pipeline exploits these Service Interface Function (SIF) images of crowded fields (CFs), making use of the availability of the full two-dimensional (2D) information. This new pipeline produced half a million additional Gaia sources in the region of the omega Centauri (ω Cen) cluster, which are published with this Focused Product Release. We discuss the dedicated SIF CF data reduction pipeline, validate its data products, and introduce their Gaia archive table. Aims. Our aim is to improve the completeness of the Gaia source inventory in a very dense region in the sky, ω Cen. Methods. An adapted version of Gaia’s Source Detection and Image Parameter Determination software located sources in the 2D SIF CF images. These source detections were clustered and assigned to new SIF CF or existing Gaia sources by Gaia s cross-match software. For the new sources, astrometry was calculated using the Astrometric Global Iterative Solution software, and photometry was obtained in the Gaia DR3 reference system. We validated the results by comparing them to the public Gaia DR3 catalogue and external Hubble Space Telescope data. Results. With this Focused Product Release, 526 587 new sources have been added to the Gaia catalogue in ω Cen. Apart from positions and brightnesses, the additional catalogue contains parallaxes and proper motions, but no meaningful colour information. While SIF CF source parameters generally have a lower precision than nominal Gaia sources, in the cluster centre they increase the depth of the combined catalogue by three magnitudes and improve the source density by a factor of ten. Conclusions. This first SIF CF data publication already adds great value to the Gaia catalogue. It demonstrates what to expect for the fourth Gaia catalogue, which will contain additional sources for all nine SIF CF regions.
- Open Access
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A37
Gaia Focused Product Release: Asteroid orbital solution
Context. We report the exploitation of a sample of Solar System observations based on data from the third Gaia Data Release (Gaia DR3) of nearly 157 000 asteroids. It extends the epoch astrometric solution over the time coverage planned for the Gaia DR4, which is not expected before the end of 2025. This data set covers more than one full orbital period for the vast majority of these asteroids. The orbital solutions are derived from the Gaia data alone over a relatively short arc compared to the observation history of many of these asteroids. Aims. The work aims to produce orbital elements for a large set of asteroids based on 66 months of accurate astrometry provided by Gaia and to assess the accuracy of these orbital solutions with a comparison to the best available orbits derived from independent observations. A second validation is performed with accurate occultation timings. Methods. We processed the raw astrometric measurements of Gaia to obtain astrometric positions of moving objects with 1D sub-mas accuracy at the bright end. For each asteroid that we matched to the data, an orbit fitting was attempted in the form of the best fit of the initial conditions at the median epoch. The force model included Newtonian and relativistic accelerations to derive the observation equations, which were solved with a linear least-squares fit. Results. Orbits are provided in the form of state vectors in the International Celestial Reference Frame for 156 764 asteroids, including near-Earth objects, main-belt asteroids, and Trojans. For the asteroids with the best observations, the (formal) relative uncertainty σa/a is better than 10−10. Results are compared to orbits available from the Jet Propulsion Laboratory and MPC. Their orbits are based on much longer data arcs, but from positions of lower quality. The relative differences in semi-major axes have a mean of 5 × 10−10 and a scatter of 5 × 10−9.
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A37
Open AccessGaia Focused Product Release: Asteroid orbital solution
Context. We report the exploitation of a sample of Solar System observations based on data from the third Gaia Data Release (Gaia DR3) of nearly 157 000 asteroids. It extends the epoch astrometric solution over the time coverage planned for the Gaia DR4, which is not expected before the end of 2025. This data set covers more than one full orbital period for the vast majority of these asteroids. The orbital solutions are derived from the Gaia data alone over a relatively short arc compared to the observation history of many of these asteroids. Aims. The work aims to produce orbital elements for a large set of asteroids based on 66 months of accurate astrometry provided by Gaia and to assess the accuracy of these orbital solutions with a comparison to the best available orbits derived from independent observations. A second validation is performed with accurate occultation timings. Methods. We processed the raw astrometric measurements of Gaia to obtain astrometric positions of moving objects with 1D sub-mas accuracy at the bright end. For each asteroid that we matched to the data, an orbit fitting was attempted in the form of the best fit of the initial conditions at the median epoch. The force model included Newtonian and relativistic accelerations to derive the observation equations, which were solved with a linear least-squares fit. Results. Orbits are provided in the form of state vectors in the International Celestial Reference Frame for 156 764 asteroids, including near-Earth objects, main-belt asteroids, and Trojans. For the asteroids with the best observations, the (formal) relative uncertainty σa/a is better than 10−10. Results are compared to orbits available from the Jet Propulsion Laboratory and MPC. Their orbits are based on much longer data arcs, but from positions of lower quality. The relative differences in semi-major axes have a mean of 5 × 10−10 and a scatter of 5 × 10−9.
- Open Access
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A38
Gaia Focused Product Release: Spatial distribution of two diffuse interstellar bands
Diffuse interstellar bands (DIBs) are absorption features seen in optical and infrared spectra of stars and extragalactic objects that are probably caused by large and complex molecules in the galactic interstellar medium (ISM). Here we investigate the Galactic distribution and properties of two DIBs identified in almost six million stellar spectra collected by the Gaia Radial Velocity Spectrometer. These measurements constitute a part of the Gaia Focused Product Release to be made public between the Gaia DR3 and DR4 data releases. In order to isolate the DIB signal from the stellar features in each individual spectrum, we identified a set of 160 000 spectra at high Galactic latitudes (|b| ⩾ 65°) covering a range of stellar parameters which we consider to be the DIB-free reference sample. Matching each target spectrum to its closest reference spectra in stellar parameter space allowed us to remove the stellar spectrum empirically, without reference to stellar models, leaving a set of six million ISM spectra. Using the star’s parallax and sky coordinates, we then allocated each ISM spectrum to a voxel (VOlume piXEL) on a contiguous three-dimensional grid with an angular size of 1.8° (level 5 HEALPix) and 29 unequally sized distance bins. Identifying the two DIBs at 862.1 nm (λ862.1) and 864.8 nm (λ864.8) in the stacked spectra, we modelled their shapes and report the depth, central wavelength, width, and equivalent width (EW) for each, along with confidence bounds on these measurements. We then explored the properties and distributions of these quantities and compared them with similar measurements from other surveys. Our main results are as follows: (1) the strength and spatial distribution of the DIB λ862.1 are very consistent with what was found in Gaia DR3, but for this work we attained a higher signal-to-noise ratio in the stacked spectra to larger distances, which allowed us to trace DIBs in the outer spiral arm and beyond the Scutum–Centaurus spiral arm; (2) we produced an all-sky map below ±65° of Galactic latitude to ~4000 pc of both DIB features and their correlations; (3) we detected the signals of DIB λ862.1 inside the Local Bubble (≲200 pc); and (4) there is a reasonable correlation with the dust reddening found from stellar absorption and EWs of both DIBs with a correlation coefficient of 0.90 for λ862.1 and 0.77 for λ864.8.
- 8 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 680, A38
Open AccessGaia Focused Product Release: Spatial distribution of two diffuse interstellar bands
Diffuse interstellar bands (DIBs) are absorption features seen in optical and infrared spectra of stars and extragalactic objects that are probably caused by large and complex molecules in the galactic interstellar medium (ISM). Here we investigate the Galactic distribution and properties of two DIBs identified in almost six million stellar spectra collected by the Gaia Radial Velocity Spectrometer. These measurements constitute a part of the Gaia Focused Product Release to be made public between the Gaia DR3 and DR4 data releases. In order to isolate the DIB signal from the stellar features in each individual spectrum, we identified a set of 160 000 spectra at high Galactic latitudes (|b| ⩾ 65°) covering a range of stellar parameters which we consider to be the DIB-free reference sample. Matching each target spectrum to its closest reference spectra in stellar parameter space allowed us to remove the stellar spectrum empirically, without reference to stellar models, leaving a set of six million ISM spectra. Using the star’s parallax and sky coordinates, we then allocated each ISM spectrum to a voxel (VOlume piXEL) on a contiguous three-dimensional grid with an angular size of 1.8° (level 5 HEALPix) and 29 unequally sized distance bins. Identifying the two DIBs at 862.1 nm (λ862.1) and 864.8 nm (λ864.8) in the stacked spectra, we modelled their shapes and report the depth, central wavelength, width, and equivalent width (EW) for each, along with confidence bounds on these measurements. We then explored the properties and distributions of these quantities and compared them with similar measurements from other surveys. Our main results are as follows: (1) the strength and spatial distribution of the DIB λ862.1 are very consistent with what was found in Gaia DR3, but for this work we attained a higher signal-to-noise ratio in the stacked spectra to larger distances, which allowed us to trace DIBs in the outer spiral arm and beyond the Scutum–Centaurus spiral arm; (2) we produced an all-sky map below ±65° of Galactic latitude to ~4000 pc of both DIB features and their correlations; (3) we detected the signals of DIB λ862.1 inside the Local Bubble (≲200 pc); and (4) there is a reasonable correlation with the dust reddening found from stellar absorption and EWs of both DIBs with a correlation coefficient of 0.90 for λ862.1 and 0.77 for λ864.8.