Muhammad Nouman Malik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Muhammad Nouman Malik has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Charalambos Klitis
University of Glasgow
16 shared publications - Veronica Toccafondo
Nanophotonics Technology Center, Universidad Politécnica de Valencia, Camino de Vera s/n, 46022 Valencia, Spain
10 shared publications - Emma Lazzeri
CNR - Ufficio Agenda Digitale e Processi, Rome, Lazio, 00185, Italy
8 shared publications Antonella Bogoni
Scuola Superiore Sant’Anna, Pisa, 56124, Italy
7 shared publications- Mirco Scaffardi
Consorzio Nazionale Interuniversitario per le Telecomunicazioni (CNIT), Pisa, Italy
7 shared publications M. Sorel
University of Glasgow, Oakfield Avenue, Glasgow G12 8LT, UK
6 shared publications
Latest Publications
- 5 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (10) , 3217-3224
10 OAM × 16 Wavelengths Two-Layer Switch Based on an Integrated Mode Multiplexer for 19.2 Tb/s Data Traffic
A two-layer switch exploiting orbital angular momentum (OAM) and wavelength of the light as switching domains is presented, aiming to increase the scalability with respect to the single-layer switches. The switch is able to accept 160 optical Gaussian data inputs on a 16-channel wavelength division multiplexing (WDM) grid and direct each input signals to different output ports exploiting 10 OAMs. The optical switch is based on an integrated OAM multiplexer followed by a compact OAM demultiplexer consisting of two refractive elements. Its experimental characterization confirmed a total enabled throughput of 19.2 Tb/s, thanks to the 30 GHz bandwidth available for each port. The switching time can be lower than 1 s. The OAM switch power consumption, solely due to the thermal tuning of the OAM emitters, since the OAM demux is passive, is 1.35 mW/Gb/s. In the proposed switching architecture the number of active components, i.e. the power consumption, scales linear with the number of ports. This is favorable in comparison with single-layer switches that cascade e.g. 2x2 elementary blocks to obtain large port counts, which scale with the square of the number of ports. The switch accepts input and output signals with Gaussian phase profile that propagate through optical fibers and waveguides, thus making it compatible with standard telecom devices. The suitability of the switch to support real data-traffic is proved by successfully testing it with 10G Ethernet and Fiber Channel over Ethernet (FCoE) data traffic and video traffic. A possible application scenario is represented by a data-center network where the switch can be used to create a low-power consumption network parallel to the network based on standard electronic routers, to manage large traffic flows.
- 5 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (10) , 3217-3224
10 OAM × 16 Wavelengths Two-Layer Switch Based on an Integrated Mode Multiplexer for 19.2 Tb/s Data Traffic
A two-layer switch exploiting orbital angular momentum (OAM) and wavelength of the light as switching domains is presented, aiming to increase the scalability with respect to the single-layer switches. The switch is able to accept 160 optical Gaussian data inputs on a 16-channel wavelength division multiplexing (WDM) grid and direct each input signals to different output ports exploiting 10 OAMs. The optical switch is based on an integrated OAM multiplexer followed by a compact OAM demultiplexer consisting of two refractive elements. Its experimental characterization confirmed a total enabled throughput of 19.2 Tb/s, thanks to the 30 GHz bandwidth available for each port. The switching time can be lower than 1 s. The OAM switch power consumption, solely due to the thermal tuning of the OAM emitters, since the OAM demux is passive, is 1.35 mW/Gb/s. In the proposed switching architecture the number of active components, i.e. the power consumption, scales linear with the number of ports. This is favorable in comparison with single-layer switches that cascade e.g. 2x2 elementary blocks to obtain large port counts, which scale with the square of the number of ports. The switch accepts input and output signals with Gaussian phase profile that propagate through optical fibers and waveguides, thus making it compatible with standard telecom devices. The suitability of the switch to support real data-traffic is proved by successfully testing it with 10G Ethernet and Fiber Channel over Ethernet (FCoE) data traffic and video traffic. A possible application scenario is represented by a data-center network where the switch can be used to create a low-power consumption network parallel to the network based on standard electronic routers, to manage large traffic flows.
- Open Access
- 1 January 2021
- Published by Optica Publishing Group
- p. Tu5F.2
Photonics-based tunable 1-50 GHz RF transmitter on silicon chip
The paper presents an innovative tunable software-defined RF transmitter based on integrated photonics, able to work in 1-50GHz with very fast tuning. The system has been characterized and verified in a communication scenario
- 1 January 2021
- Published by Optica Publishing Group
- p. Tu5F.2
Open AccessPhotonics-based tunable 1-50 GHz RF transmitter on silicon chip
The paper presents an innovative tunable software-defined RF transmitter based on integrated photonics, able to work in 1-50GHz with very fast tuning. The system has been characterized and verified in a communication scenario
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (1) , 91-97
Tunable Orbital Angular Momentum Converter Based on Integrated Multiplexers
A four-orbital angular momentum (OAM) modes converter consisting of the cascade of an OAM demultiplexer and an OAM multiplexer is implemented and characterized. The OAM multiplexer is realized with an integrated photonic circuit based on four tunable OAM emitters, i.e. the order of the emitted OAM mode can be selected by thermal tuning. It works on linearly polarized signals. The OAM demultiplexer, completely passive, consists of the cascade of two patterned refractive elements followed by a lens and can work independently of the polarization of the input signals. The proposed OAM converter can receive at its input a bundle of spatially multiplexed beams mapped on different OAM modes, each one carrying a set of wavelength division multiplexed (WDM) channels. Each WDM channel can be independently converted to a different OAM mode and all the OAM beams are multiplexed at the converter output. The performance of the proposed scheme is assessed as a function of the order of the OAM beam before and after the conversion, as well as of the wavelength of the input signal. The measurements show a power penalty on the bit error-rate (BER) curves of less than 1 dB in all the considered cases. The scheme is tested also with 100 Gb/s real data-traffic generated with commercial network cards, showing full operability. The cascading ability of the proposed scheme is also investigated in an experiment where the signal to be converted is generated by an OAM multiplexer, i.e. the output stage of the OAM converter, showing a penalty of less than 2 dB. Moreover, considerations on scalability, bandwidth and power consumption are also included along with a possible application of OAM conversion within add/drop nodes in an OAM-wavelength multiplexed transmission scenario.
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (1) , 91-97
Tunable Orbital Angular Momentum Converter Based on Integrated Multiplexers
A four-orbital angular momentum (OAM) modes converter consisting of the cascade of an OAM demultiplexer and an OAM multiplexer is implemented and characterized. The OAM multiplexer is realized with an integrated photonic circuit based on four tunable OAM emitters, i.e. the order of the emitted OAM mode can be selected by thermal tuning. It works on linearly polarized signals. The OAM demultiplexer, completely passive, consists of the cascade of two patterned refractive elements followed by a lens and can work independently of the polarization of the input signals. The proposed OAM converter can receive at its input a bundle of spatially multiplexed beams mapped on different OAM modes, each one carrying a set of wavelength division multiplexed (WDM) channels. Each WDM channel can be independently converted to a different OAM mode and all the OAM beams are multiplexed at the converter output. The performance of the proposed scheme is assessed as a function of the order of the OAM beam before and after the conversion, as well as of the wavelength of the input signal. The measurements show a power penalty on the bit error-rate (BER) curves of less than 1 dB in all the considered cases. The scheme is tested also with 100 Gb/s real data-traffic generated with commercial network cards, showing full operability. The cascading ability of the proposed scheme is also investigated in an experiment where the signal to be converted is generated by an OAM multiplexer, i.e. the output stage of the OAM converter, showing a penalty of less than 2 dB. Moreover, considerations on scalability, bandwidth and power consumption are also included along with a possible application of OAM conversion within add/drop nodes in an OAM-wavelength multiplexed transmission scenario.
- 7 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (16) , 3948-3955
Demonstration of a Multiplane OAM-Wavelength Packet Switch Controlled by a Two-Step Scheduler Implemented in FPGAs
In order to meet the demand for highly scalable and energy efficient data center switches, multiplane architectures, where multiple optical switching domains are leveraged, are an attractive solution. In this scenario, the orbital angular momentum (OAM) of light can be exploited as an additional domain along with wavelength, space, and time. In this work we report the demonstration of an OAM-wavelength photonic integrated packet switch controlled by an FPGA implementing a two-step scheduler suited for multiplane architectures. Packet-based bit error rate (BER) measurements show transmission at 20 Gb/s with BER $< 10^(-9)$ also for the most critical switch configurations, with penalty < 2 dB with respect to the back-to-back. The measurements demonstrate that the hardware-controlled switch can support up to 32 ports distributed in 4 cards with 8 ports each.- 7 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (16) , 3948-3955
Demonstration of a Multiplane OAM-Wavelength Packet Switch Controlled by a Two-Step Scheduler Implemented in FPGAs
In order to meet the demand for highly scalable and energy efficient data center switches, multiplane architectures, where multiple optical switching domains are leveraged, are an attractive solution. In this scenario, the orbital angular momentum (OAM) of light can be exploited as an additional domain along with wavelength, space, and time. In this work we report the demonstration of an OAM-wavelength photonic integrated packet switch controlled by an FPGA implementing a two-step scheduler suited for multiplane architectures. Packet-based bit error rate (BER) measurements show transmission at 20 Gb/s with BER $< 10^(-9)$ also for the most critical switch configurations, with penalty < 2 dB with respect to the back-to-back. The measurements demonstrate that the hardware-controlled switch can support up to 32 ports distributed in 4 cards with 8 ports each.- 1 January 2019
- Published by Optica Publishing Group
- p. W2A.35
First demonstration of an FPGA-controlled multiplane OAM-wavelength packet switch
We report the first demonstration of an OAM-wavelength photonic integrated packet switch, controlled by a FPGA-based scheduler suited for multiplane architectures. We show error-free transmission at 20 Gb/s in multiple OAM-wavelength configurations.
- 1 January 2019
- Published by Optica Publishing Group
- p. W2A.35
First demonstration of an FPGA-controlled multiplane OAM-wavelength packet switch
We report the first demonstration of an OAM-wavelength photonic integrated packet switch, controlled by a FPGA-based scheduler suited for multiplane architectures. We show error-free transmission at 20 Gb/s in multiple OAM-wavelength configurations.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Packaging of Silicon Microlenses on Integrated OAM-Emitters for Compact Transmitters
A silicon microlens for OAM beams collimation is, for the first time, successfully fabricated and packaged with an integrated OAM multiplexer, exploiting innovative packaging approaches. We demonstrate that such compact device does not introduce significant penalty in OAM switching experiments.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Packaging of Silicon Microlenses on Integrated OAM-Emitters for Compact Transmitters
A silicon microlens for OAM beams collimation is, for the first time, successfully fabricated and packaged with an integrated OAM multiplexer, exploiting innovative packaging approaches. We demonstrate that such compact device does not introduce significant penalty in OAM switching experiments.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
19.2Tb/s Optical Switch Based on an Integrated OAM Multiplexer
A ~20Tb/s optical switch with switching time of hundreds of ns and power consumption of ~1 mWI(Gb/s) has been demonstrated. The switch is based on two-layer WDM and OAM (orbital angular momentum) multiplexing and it exploits integrated photonics.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
19.2Tb/s Optical Switch Based on an Integrated OAM Multiplexer
A ~20Tb/s optical switch with switching time of hundreds of ns and power consumption of ~1 mWI(Gb/s) has been demonstrated. The switch is based on two-layer WDM and OAM (orbital angular momentum) multiplexing and it exploits integrated photonics.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
The Orbital Angular Momentum of Light for Next Generation Optical Switches
Orbital angular momentum (OAM) and wavelength are exploited to build a two-layer switch based on an integrated OAM multiplexer. The switch effectively supports real data traffic and shows significant power consumption reduction compared to single-layer implementations, enabling >160 ports count.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
The Orbital Angular Momentum of Light for Next Generation Optical Switches
Orbital angular momentum (OAM) and wavelength are exploited to build a two-layer switch based on an integrated OAM multiplexer. The switch effectively supports real data traffic and shows significant power consumption reduction compared to single-layer implementations, enabling >160 ports count.
- Open Access
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
The Orbital Angular Momentum of Light for Ultra-High Capacity Data Centers
The potential of orbital angular momentum (OAM) of light in data center scenarios is presented. OAMs can be exploited for short reach ultra-high bit rate fiber links and as additional multiplexing domain in transparent ultra-high capacity optical switches. Recent advances on OAM integrated photonic technology are also reported. Finally demonstration of OAM-based fiber links (aggregate throughput 17.9 Tb/s) and two layers OAM-WDM-based optical switches are presented exploiting OAM integrated components and demonstrating the achievable benefits in terms of size, weight and power consumption (SWaP) compared to different technologies.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Open AccessThe Orbital Angular Momentum of Light for Ultra-High Capacity Data Centers
The potential of orbital angular momentum (OAM) of light in data center scenarios is presented. OAMs can be exploited for short reach ultra-high bit rate fiber links and as additional multiplexing domain in transparent ultra-high capacity optical switches. Recent advances on OAM integrated photonic technology are also reported. Finally demonstration of OAM-based fiber links (aggregate throughput 17.9 Tb/s) and two layers OAM-WDM-based optical switches are presented exploiting OAM integrated components and demonstrating the achievable benefits in terms of size, weight and power consumption (SWaP) compared to different technologies.
- Open Access
- 1 February 2018
- Published by Elsevier in Optics Communications
- Vol. 408, 63-67
Interconnection network architectures based on integrated orbital angular momentum emitters
- 1 February 2018
- Published by Elsevier in Optics Communications
- Vol. 408, 63-67
Open AccessInterconnection network architectures based on integrated orbital angular momentum emitters