Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jian-Zhong Jiang has a total of 493 co-authors. Here are the top co-authors by number of shared publications:

  • Xiao-Dong Wang

    International Center for New-Structured Materials, Laboratory of New-Structured Materials, State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University

    40 shared publications
  • Q. P. Cao

    International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon and Advanced Semiconductor Materials, and School of Materials Science and Engineering, Zhejiang University 1 , Hangzhou 310027

    20 shared publications
  • D. X. Zhang

    International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon and Advanced Semiconductor Materials, and School of Materials Science and Engineering, Zhejiang University 1 , Hangzhou 310027

    17 shared publications
  • Dongxian Zhang

    State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310027, People's Republic of China

    16 shared publications
  • Qingping Cao

    International Center for New-Structured Materials (ICNSM), State Key Laboratory of Silicon Materials, and School of Materials Science and Engineering, Zhejiang University 1 , Hangzhou 310027, People’s Republic of China

    14 shared publications
  • Qingping Cao

    Zhejiang Univ, Sch Mat Sci & Engn, ICNSM, Hangzhou 310027, Zhejiang, Peoples R China

    14 shared publications

Latest Publications

  • Correlation between Undercooling and Atomic Structure in a Ni-Nb Melt Under Electrostatic Levitation and Microgravity

    by Sheng-Hao Liu, Xiao-Dong Wang, Qing-Ping Cao, Dong-Xian Zhang, Qiong-Jie Wang, Jian-Zhong Jiang

  • Open Access

    Rejuvenated Amorphous Alloys: Processing Methods, Microstructures and Mechanical Properties

    by Can Yang, Yu Chen, Chunguang Tang, Si Lan, Jun Tan, Heng Ye, Hua Chen, Zhifu Yao, Jürgen Eckert, Dongxian Zhang, et al.

    Amorphous alloys are considered promising structural and engineering materials owing to exceptional properties such as high strength/hardness and large elastic limit resulted from disordered atomic structures. However, the intrinsic brittleness and lack of work‐hardening severely restrict their widespread application in structural fields. To address these limitations, rejuvenation strategies have recently been proposed and rapidly developed. These approaches can be broadly categorized into mechanical processing, thermal rejuvenation, and alternative techniques. Rejuvenation not only can be applied to a wide range of alloy compositions including martensitic metallic glass, but also retains alloys disordered amorphous structures. Nevertheless, each route still faces unresolved engineering challenges. While enhanced plasticity and strain‐hardening have been reported in rejuvenated glassy alloys, issues such as premature mechanical failure and the competition and transition between aging and rejuvenation are frequently observed. The transition from brittle to ductile behavior as well as variations in mechanical performance has been closely linked to microstructural features, particularly atomic clusters. Therefore, a thorough understanding of the relationship among rejuvenation processes, microstructural evolution, and mechanical properties is essential. This work aims to provide a comprehensive and critical review of the current progress in this field.

  • Temperature-induced structural evolution in liquid Bi86.8Au13.2 alloy

    by X. D. Wang, Q. P. Cao, Kevin A. Beyer, K. Yang, D. X. Zhang, J. Z. Jiang

    Temperature-induced structural evolution of a liquid Bi86.8Au13.2 alloy has been investigated by combining in situ high-energy x-ray diffraction with ab initio molecular dynamics simulations. It shows that a reversible liquid-to-liquid crossover (LLC) appears in the liquid Bi86.8Au13.2 alloy at around 700–800 K, which could be attributed to the decrease of Au around Au atoms and the increase of coordination number around Bi atoms in the short range. In addition, the appearance of an additional subpeak between the main first and second peak in g(r) implies that this LLC could link with the low-temperature liquid, which tends to have the local atomic packing of solid Au2Bi and Bi crystalline phases through the structural heredity.

  • Open Access

    Data Science in Order and Disorder of High-Entropy Materials

    by Jiasheng Wang, Jianzhong Jiang, Peter K. Liaw, Guihong Geng, Yong Zhang

    In recent years, high-entropy materials (HEMs) have garnered significant attention due to their unique multi-principal element compositions, which endow them with remarkable properties distinct from traditional materials. The order and disorder in HEMs are particularly complex, influenced by factors such as temperature, pressure, and composition, and are closely related to their mechanical and physical properties. This review systematically summarizes the progress in understanding the order and disorder in HEMs, with a focus on the role of data science in this field. We introduce the basic concepts of order and disorder and the related research in HEMs, discuss the nonlinear behaviors of HEMs, and elaborate on the relevant applications of data science, including analysis by machine learning, molecular dynamics simulations, and Monte Carlo simulations. Challenges and future directions are also explored, aiming to provide comprehensive insights into materials science.


  • Open Access

    Influence of Heat Treatment on the Microstructure and Mechanical Properties of FeCoNiCrMn High-Entropy Alloy Manufactured via Laser Powder Bed Fusion

    by Jiahong Liang, Guoxing Zhu, Jingli Sun, Shoujiang Qu, Jianzhong Jiang, Guojian Cao, Hao Wang, Jun Shen, Aihan Feng, Daolun Chen

    Laser powder bed fusion (L-PBF), as one of the additive manufacturing (AM) or 3D printing techniques, has been widely used for the net-shape fabrication of high-entropy alloys (HEAs). However, microstructural defects are often present in the FeCoNiCrMn high-entropy alloy fabricated via L-PBF, which necessitate subsequent heat treatment for optimization. In this study, FeCoNiCrMn HEA samples were fabricated using L-PBF and subsequently annealed at different temperatures. The influence of heat treatment on the microstructure and mechanical properties was investigated. The results revealed that the cellular substructure remained stable at 650 °C, while at 1100 °C dislocation recovery and compositional homogenization occurred, leading to the dissolution of the cellular substructure. After annealing at 1200 °C, the elongation of the alloy increased by 82%, while the yield strength and ultimate tensile strength decreased by 37% and 10%, respectively, compared to the as-built state. The cellular substructure not only contributed to strength through dislocation strengthening but also acted as nucleation sites for subsequent twinning, resulting in improved work hardening capability. Annealing-induced grain growth and substructure elimination improved the capacity of coordinated plastic deformation, while weakening the contribution of grain rotation and twinning mechanisms.


  • Open Access

    Rapid mechanochemical synthesis and properties in Pb–Bi–S system

    by Peter Baláž, Erika Dutková, Nina Daneu, Michal Hegedüs, Matej Baláž, Emmanuel Guilmeau, Róbert Džunda, Mária Bali-Hudáková, Veronika Garbárová, Jianzhong Jiang, et al.

    Possibility to transform PbS in reaction with Bi and S to Pb6Bi2S9 is discovered. Transformation benefits from rapid synthesis performed in a high-energy planetary mill. Synthesis can be promising for the preparation of new thermoelectrics.


  • Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

    by Q. L. Shi, X. D. Wang, Q. P. Cao, S. Q. Ding, D. X. Zhang, K. A. Beyer, J. Z. Jiang

    Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. The main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.


  • Open Access

    Anomalous temperature dependence of elastic limit in metallic glasses

    by Yifan Wang, Jing Liu, Jian-Zhong Jiang, Wei Cai

    Understanding the atomistic mechanisms of inelastic deformation in metallic glasses (MGs) remains challenging due to their amorphous structure, where local carriers of plasticity cannot be easily defined. Using molecular dynamics (MD) simulations, we analyzed the onset of inelastic deformation in CuZr MGs, specifically the temperature dependence of the elastic limit, in terms of localized shear transformation (ST) events. We find that although the ST events initiate at lower strain with increasing temperature, the elastic limit increases with temperature in certain temperature ranges. We explain this anomalous behavior through the framework of an energy-strain landscape (ESL) constructed from high-throughput strain-dependent energy barrier calculations for the ST events identified in the MD simulations. The ESL reveals that the anomalous behavior is caused by the transition of ST events from irreversible to reversible with increasing temperature. An analytical formulation is developed to predict this transition and the temperature dependence of the elastic limit.


  • Open Access

    Plasticity Improvement in a Co-Rich Co40Fe25Cr20Ni15 High-Entropy Alloy via Al Alloying

    by Yuxiao Li, Yu Chen, Raymond Kwesi Nutor, Nan Wang, Qingping Cao, Xiaodong Wang, Dongxian Zhang, Jian-Zhong Jiang

    The mechanical properties of high-entropy alloys (HEAs) can be regulated by altering the stacking fault energy (SFE) through compositional modulation. The Co-rich HEAs, exhibiting deformation twinning and even strain-induced martensitic transformation at room temperature, suffer from insufficient ductility at high strength. In this work, we developed Co-rich (Co40Fe25Cr20Ni15)100−xAlx (x = 0 and 5 at.%) HEAs and investigated their tensile behaviors at room temperature. The addition of Al resulted in a massive improvement in the strength-ductility product, even at similar grain sizes, and also altered the fracture mode from quasi-cleavage to ductile dimple fracture. Interestingly, both alloys were deformed by mechanical twinning, which was also verified by molecular dynamics (MD) simulations. The MD simulations revealed the SFE increased upon Al addition; however, the slip energy barrier was reduced, which favored the mobility of dislocations and twinning propensity to prolong strain hardening. The present findings provide further insights into the regulation of mechanical properties of HEAs by Al-alloying.


  • Open Access

    Quasi-superplasticity in the AlCoNiV medium entropy alloy with Heusler L21 precipitates

    by Raymond Kwesi Nutor, Ran Wei, Qingping Cao, Xiaodong Wang, Shaoqing Ding, Dongxian Zhang, Fushan Li, Jian-Zhong Jiang

    The high-temperature tensile deformation behaviors of the recrystallization annealed Al7(CoNiV)93 medium entropy alloy with a duplex hierarchical microstructure of face-centered cubic (fcc) and ordered body-centered cubic L21 Heusler-type grains were investigated. The alloy showed a remarkably high tensile strength of ∼1.1 GPa and good ductility of ∼17% at 923 K due to a good strain hardening capacity of 60 MPa. At 1073 K, the highest fracture elongation of ∼270% was displayed at a strain rate of 10−3 s−1. The strain rate sensitivity was estimated to be about 0.32, which is typical of alloys that show this quasi-superplastic elongation. The activation energy was also estimated to be ∼421 kJ/mol. With deformation at 1073 K at a strain rate of 10−3 s−1, the duplex microstructure transformed into a refined triplex fcc-L21-σ equiaxed microstructure. The development of the triplex equiaxed microstructure resulted from dynamic recrystallization (DRX), which assisted in the maximum superplastic-like elongation of 270%. The inability of the alloy to access true superplasticity was attributed to immense cavitation due to the high amount of the brittle σ phase, which served as de-cohesion sites for the early fracture of the sample. However, the observed quasi-superplasticity could still be useful in superplastic forming operations.