Flemming Bjerg Grumsen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Flemming Bjerg Grumsen has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Adam Cretton
Department of Physics, Technical University of Denmark, Denmark
2 shared publications - Carsten Detlefs
European Synchrotron Radiation Facility, Grenoble, France
2 shared publications - Felix Frankus
Department of Civil and Mechanical Engineering, Technical University of Denmark, Denmark
2 shared publications - Grethe Winther
Technical University of Denmark
2 shared publications - Albert Zelenika1 shared publication
- Anter El-Azab
School of Materials Engineering Purdue University 47907 West Lafayette IN USA
1 shared publication
Latest Publications
- Open Access
- 18 June 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (4) , 1152-1158
D-stroi – a uniaxial load frame for X-ray diffraction and imaging
We present a remotely controlled miniature load frame for in situ tensile deformation of millimetre-sized metal samples in synchrotron X-ray diffraction and imaging environments. The load frame features in-built digital image correlation-based controls to accurately track deformation until rupture at tensile loads up to 500 N. The mechanical setup is designed to minimize the shift in the sample's centre during loading, thereby maintaining a constant illumination volume.
- 18 June 2026
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 33 (4) , 1152-1158
Open AccessD-stroi – a uniaxial load frame for X-ray diffraction and imaging
We present a remotely controlled miniature load frame for in situ tensile deformation of millimetre-sized metal samples in synchrotron X-ray diffraction and imaging environments. The load frame features in-built digital image correlation-based controls to accurately track deformation until rupture at tensile loads up to 500 N. The mechanical setup is designed to minimize the shift in the sample's centre during loading, thereby maintaining a constant illumination volume.
- Open Access
- 12 June 2026
- Published by Elsevier in SSRN Electronic Journal
NaOH-induced Corrosion in Thermal Convection Loops made of Ni 201 and Inconel 600
This study explored molten NaOH-induced polythermal corrosion behavior of Ni 201 and Inconel 600 through comparative analysis of thermal convection flow loops after 1000 hours. In the free-convection loops, the circulation of molten NaOH was facilitated by an 85°C temperature gradient between hot (460°C) and cold legs (375°C). Post- analysis of samples collected from the hottest and coldest points were made by X-ray diffraction, scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. Additionally, static corrosion tests of Ni 201 and Inconel 600 rods were conducted at 460°C for comparison between isothermal and polythermal corrosion and to investigate the effect of flow. Results reveal differing corrosion behaviors, with Ni 201 exhibiting deeper corrosion attack compared to Inconel 600 in the flow loops, while Inconel 600 showed thicker oxides scales after static exposure compared to Ni 201. Microstructural analysis indicates mass transfer and intergranular attack in the flow loop of Ni 201 and selective leaching and oxidation of the least noble elements of the Inconel 600 flow loop.
- 12 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNaOH-induced Corrosion in Thermal Convection Loops made of Ni 201 and Inconel 600
This study explored molten NaOH-induced polythermal corrosion behavior of Ni 201 and Inconel 600 through comparative analysis of thermal convection flow loops after 1000 hours. In the free-convection loops, the circulation of molten NaOH was facilitated by an 85°C temperature gradient between hot (460°C) and cold legs (375°C). Post- analysis of samples collected from the hottest and coldest points were made by X-ray diffraction, scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. Additionally, static corrosion tests of Ni 201 and Inconel 600 rods were conducted at 460°C for comparison between isothermal and polythermal corrosion and to investigate the effect of flow. Results reveal differing corrosion behaviors, with Ni 201 exhibiting deeper corrosion attack compared to Inconel 600 in the flow loops, while Inconel 600 showed thicker oxides scales after static exposure compared to Ni 201. Microstructural analysis indicates mass transfer and intergranular attack in the flow loop of Ni 201 and selective leaching and oxidation of the least noble elements of the Inconel 600 flow loop.
- Open Access
- 27 March 2026
- Published by Elsevier in SSRN Electronic Journal
Unexpected Planar Dislocation Boundary Formation in FCC Metals Captured by Dark-Field X-ray Microscopy and Continuum Dislocation Dynamics
Validating dislocation patterning models against in situ imaging experiments is a longstanding goal in materials physics. Here, we provide the first direct morphological comparison of such models. Using in situ Dark-Field Xray Microscopy (DFXM), we map the local orientations in high-purity aluminium deformed along [100] and find unexpected planar dislocation boundaries aligned with {111} slip planes that form prior to the development of a conventional dislocation cell structure. To explain this behaviour, we generate synthetic DFXM contrast images from a continuum dislocation dynamics (CDD) simulation. This mesoscale model, using nickel as a high stacking fault energy (SFE) FCC analogue, independently predicts the formation of the same {111} planar boundary types. This correspondence demonstrates that state-of-the-art CDD and DFXM experimental data can be used synergistically — despite differences in strain rates and length scales — as a practical route for refining continuum theories of plasticity.
- 27 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUnexpected Planar Dislocation Boundary Formation in FCC Metals Captured by Dark-Field X-ray Microscopy and Continuum Dislocation Dynamics
Validating dislocation patterning models against in situ imaging experiments is a longstanding goal in materials physics. Here, we provide the first direct morphological comparison of such models. Using in situ Dark-Field Xray Microscopy (DFXM), we map the local orientations in high-purity aluminium deformed along [100] and find unexpected planar dislocation boundaries aligned with {111} slip planes that form prior to the development of a conventional dislocation cell structure. To explain this behaviour, we generate synthetic DFXM contrast images from a continuum dislocation dynamics (CDD) simulation. This mesoscale model, using nickel as a high stacking fault energy (SFE) FCC analogue, independently predicts the formation of the same {111} planar boundary types. This correspondence demonstrates that state-of-the-art CDD and DFXM experimental data can be used synergistically — despite differences in strain rates and length scales — as a practical route for refining continuum theories of plasticity.
- Open Access
Container-Sized CO2 to Methane: Design, Construction and Catalytic Tests Using Raw Biogas to Biomethane
Direct catalytic methanation of CO2 (from CO2/CH4 biogas mixture) to produce biomethane was conducted in a pilot demonstration plant. In the demonstration project (MeGa-StoRE), a biogas desulfurization process and thermochemical methanation of biogas using hydrogen produced by water electrolysis were carried out at a fully operational biogas plant in Denmark. The main objective of this part of the project was to design and develop a reactor system for catalytic conversion of CO2 in biogas to methane and feed biomethane directly to the existing natural gas grid. A process was developed in a portable container with a 10 Nm3/h of biogas conversion capacity. A test campaign was run at a biogas plant for more than 6 months, and long-time operation revealed a stable steady-state conversion of more than 90% CO2 conversion to methane. A detailed catalytic study was performed to investigate the high activity and stability of the applied catalyst.
Open AccessContainer-Sized CO2 to Methane: Design, Construction and Catalytic Tests Using Raw Biogas to Biomethane
Direct catalytic methanation of CO2 (from CO2/CH4 biogas mixture) to produce biomethane was conducted in a pilot demonstration plant. In the demonstration project (MeGa-StoRE), a biogas desulfurization process and thermochemical methanation of biogas using hydrogen produced by water electrolysis were carried out at a fully operational biogas plant in Denmark. The main objective of this part of the project was to design and develop a reactor system for catalytic conversion of CO2 in biogas to methane and feed biomethane directly to the existing natural gas grid. A process was developed in a portable container with a 10 Nm3/h of biogas conversion capacity. A test campaign was run at a biogas plant for more than 6 months, and long-time operation revealed a stable steady-state conversion of more than 90% CO2 conversion to methane. A detailed catalytic study was performed to investigate the high activity and stability of the applied catalyst.
- 31 July 2019
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (21) , 13787-13809
Effect of service exposure on KCl corrosion attack of AISI 347H FG steel
- 31 July 2019
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (21) , 13787-13809
Effect of service exposure on KCl corrosion attack of AISI 347H FG steel