JDJonas Drewes

Jonas Drewes

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jonas Drewes has a total of 135 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigating Gold Deposition with High-Power Impulse Magnetron Sputtering and Direct-Current Magnetron Sputtering on Polystyrene, Poly-4-vinylpyridine, and Polystyrene Sulfonic Acid

    by Yusuf Bulut, Benedikt Sochor, Kristian A. Reck, Bernhard Schummer, Alexander Meinhardt, Jonas Drewes, Suzhe Liang, Tianfu Guan, Arno Jeromin, Andreas Stierle, et al.

    Fabricating thin metal layers and particularly observing their formation process in situ is of fundamental interest to tailor the quality of such a layer on polymers for organic electronics. In particular, the process of high power impulse magnetron sputtering (HiPIMS) for establishing thin metal layers has sparsely been explored in situ. Hence, in this study, we investigate the growth of thin gold (Au) layers with HiPIMS and compare their growth with thin Au layers prepared by conventional direct current magnetron sputtering (dcMS). Au was chosen because it is an inert noble metal and has a high scattering length density. This allows us to track the growing nanostructures via grazing incidence scattering. In particular, Au deposition on the polymer polystyrene (PS) with the respective structural analogues poly-4-vinlypyridine (P4VP) and polystyrene sulfonic acid (PSS) is studied. Additionally, the nanostructured layers on these different polymer films are further probed by field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), X-ray reflectometry (XRR), and four-point probe measurements. We report that HiPIMS leads to smaller island-to-island distances throughout the whole sputter process. Moreover, an increased cluster density and an earlier percolation threshold are achieved compared to dcMS. Additionally, in the early stage, we observe a significant increase in coverage by HiPIMS, which is favorable for the improvement of the polymer-metal interface.


  • Open Access

    High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions

    by Tianfu Guan, Suzhe Liang, Yicui Kang, Evangelina Pensa, Dong Li, Wenkai Liang, Zhiqiang Liang, Yusuf Bulut, Kristian A. Reck, Tianxiao Xiao, et al.

    Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.


  • Open Access

    A Concentrically Moveable Erosion Zone Magnetron for In Operando Tailoring of Alloy Nanoparticles in a Gas Aggregation Source

    by Jonas Drewes, Florian Ziegler, Michael Morisch, Jonathan Lemke, Stefan Rehders, Frowin Ellermann, Thomas Strunskus, Franz Faupel, Alexander Vahl

    One particularly interesting approach for the deposition of highly pure nanoparticles (NPs) in a solvent‐ and surfactant‐free process is the gas phase synthesis of nanoparticles using a gas aggregation source (GAS) based on magnetron sputtering. Apart from the possibility of tuning the NP size‐distribution via process parameters, e.g., gas flow, pressure, and aggregation length, multicomponent targets in a GAS enable in operando composition tuning of alloy NPs. However, in the practical application of the GAS, two main challenges have to be addressed: low target utilization and low conversion efficiency. This work describes a magnetron with a concentrically moveable erosion zone (cMEZ magnetron), and showcases its applicability for the deposition of metal (Cu) and metal alloy (CuNi) NPs via GAS. The cMEZ magnetron relies on an in operando reconfigurable outer magnet array, which enables tuning of the position of the erosion zone, impacting target utilization. By weighting the targets and substrates before and after deposition, the conversion efficiency is determined for different operating pressures and magnet configurations. Furthermore, the multicomponent target approach is tested with the cMEZ magnetron, which enabled the in operando composition tuning of the Ni content in CuNi NPs from ≈5 to ≈35 at% only by varying the magnetic field.


  • Open Access

    In Situ Imaging of Dynamic Current Paths in a Neuromorphic Nanoparticle Network with Critical Spiking Behavior

    by Ole Gronenberg, Blessing Adejube, Torben Hemke, Jonas Drewes, Oguz Han Asnaz, Florian Ziegler, Niko Carstens, Thomas Strunskus, Ulrich Schürmann, Jan Benedikt, et al.

    In the strive for energy efficient computing, many different neuromorphic computing and engineering schemes have been introduced. Nanoparticle networks (NPNs) at the percolation threshold have been established as one of the promising candidates, e.g., for reservoir computing because among other useful properties they show self‐organization and brain‐like avalanche dynamics. The dynamic resistance changes trace back to spatio‐temporal reconfigurations in the connectivity upon resistive switching in distributed memristive nano‐junctions and nano‐gaps between neighboring nanoparticles. Until now, however, there has not yet been any direct imaging or monitoring of current paths in NPN. In this study, an NPN comprising of Ag/CxOyHz core/shell and Ag nanoparticles at the percolation threshold is reported. It is shown that this NPN is within a critical regime, exhibiting avalanche dynamics. To monitor in situ the evolving current paths in this NPN, active voltage contrast and resistive contrast imaging are used complementarily. Including simulations, the results provide experimental insight toward understanding the complex current response of the memristive NPN. As such, this study paves the way toward an experimental characterization of dynamic reorganizations in current paths inside NPN, which is highly relevant for validating and improving simulations and finally establishing a deeper understanding of switching dynamics in NPNs.


  • Open Access

    A freestanding photoswitchable aero-polymer with an incorporated bridged azobenzene: 3D structure, photoinduced motion, biocompatibility and potential application as photomechanical cell scaffold

    by Maximilian H. Burk, Daniel Hagenbusch, Christine Arndt, Lukas Pott, Margarethe Hauck, Jonas Drewes, Stefan Rehders, Thomas Strunskus, Torge Hartig, Christine Selhuber-Unkel, et al.

    Photoswitchable polymers are of great interest for a variety of applications such as optical data storage, functional membranes and photoactuators. The latter are typically fabricated by wet-chemical approaches including gels, liquid-crystalline elastomers and supramolecular polymers. In this work we demonstrate the fabrication of a new freestanding photoswitchable aeropolymer-structure via solvent-free, single-step initiated chemical vapor deposition (iCVD) using tetrapodal zinc oxide (t-ZnO) as sacrificial substrate material. On the molecular scale, the copolymer is composed of 2-hydroxyethyl methacrylate (HEMA) and a specifically synthesized diazocine (a bridged azobenzene) as photoswitchable cross-linking unit. iCVD enables in this connection a combination of both comonomers while preserving their chemical functionalities as well as the individual structure of the t-ZnO templates without pore clogging. After post-reactional etching and drying, a hollow polymer network with nanoscopic thin walls remains maintaining the substrate characteristic tetrapodal structure, which we coined aero-photoswitch. We identify and differentiate specific properties of the fabricated structures, originating from the switchable copolymer and the highly porous tetrapodal conformation, for a comprehensive description of the overall aero-structures. These aero-photoswitchable polymers provide unique properties due to their extremely delicate yet stable morphology and their efficient transformation of molecular photoisomerization to motion on the macroscopic scale upon illumination with blue light. In addition, we investigate their biocompatibility as well as successful cell attachment and proliferation. These new photoswitchable actuators turn out to be highly promising smart materials for future research on photoswitchable scaffolds.


  • Open Access

    A novel method for the synthesis of core–shell nanoparticles for functional applications based on long-term confinement in a radio frequency plasma

    by Oguz Han Asnaz, Jonas Drewes, Marie Elis, Thomas Strunskus, Franko Greiner, Oleksandr Polonskyi, Franz Faupel, Lorenz Kienle, Alexander Vahl, Jan Benedikt

    A novel combined setup of a gas aggregation source and a secondary radio frequency discharge is used to generate, confine, and coat nanoparticles. The approach is demonstrated by generating Ag@SiO2 nanoparticles with a well-defined surface coating.


  • Open Access

    On the plasma permeability of highly porous ceramic framework materials using polymers as marker materials

    by M. Leander Marxen, Luka Hansen, Armin Reimers, Tim Tjardts, Lena M. Saure, Erik Greve, Jonas Drewes, Fabian Schütt, Rainer Adelung, Holger Kersten

    Highly porous framework materials are of large interest due to their broad potential for application, for example, as sensors or catalysts. A new approach is presented to investigate, how deep plasma species can penetrate such materials. For this purpose, a polymer (ethylene propylene diene monomere rubber) is used as marker material and covered with the porous material during plasma exposure. Water contact‐angle and X‐ray photoelectron spectroscopy measurements are used to identify changes in the polymer surface, originating from the interaction of plasma species with the polymer. The method is demonstrated by studying the plasma permeability of tetrapodal zinc oxide framework materials with a porosity of about 90% in an oxygen low‐pressure capacitively coupled plasma. Significant differences in the penetration depth ranging from roughly 1.6–4 mm are found for different densities of the material and different treatment conditions.


  • Open Access

    Nanosensors Based on a Single ZnO:Eu Nanowire for Hydrogen Gas Sensing

    by Cristian Lupan, Abhishek Kumar Mishra, Niklas Wolff, Jonas Drewes, Helge Krüger, Alexander Vahl, Oleg Lupan, Thierry Pauporté, Bruno Viana, Lorenz Kienle, et al.

    Fast detection of hydrogen gas leakage or its release in different environments, especially in large electric vehicle batteries, is a major challenge for sensing applications. In this study, the morphological, structural, chemical, optical, and electronic characterizations of ZnO:Eu nanowire arrays are reported and discussed in detail. In particular, the influence of different Eu concentrations during electrochemical deposition was investigated together with the sensing properties and mechanism. Surprisingly, by using only 10 μM Eu ions during deposition, the value of the gas response increased by a factor of nearly 130 compared to an undoped ZnO nanowire and we found an H2 gas response of ∼7860 for a single ZnO:Eu nanowire device. Further, the synthesized nanowire sensors were tested with ultraviolet (UV) light and a range of test gases, showing a UV responsiveness of ∼12.8 and a good selectivity to 100 ppm H2 gas. A dual-mode nanosensor is shown to detect UV/H2 gas simultaneously for selective detection of H2 during UV irradiation and its effect on the sensing mechanism. The nanowire sensing approach here demonstrates the feasibility of using such small devices to detect hydrogen leaks in harsh, small-scale environments, for example, stacked battery packs in mobile applications. In addition, the results obtained are supported through density functional theory-based simulations, which highlight the importance of rare earth nanoparticles on the oxide surface for improved sensitivity and selectivity of gas sensors, even at room temperature, thereby allowing, for instance, lower power consumption and denser deployment.


  • Open Access

    In Situ Laser Light Scattering for Temporally and Locally Resolved Studies on Nanoparticle Trapping in a Gas Aggregation Source

    by Jonas Drewes, Stefan Rehders, Thomas Strunskus, Holger Kersten, Franz Faupel, Alexander Vahl

    Gas phase synthesis of nanoparticles (NPs) via magnetron sputtering in a gas aggregation source (GAS) has become a well‐established method since its conceptualization three decades ago. NP formation is commonly described in terms of nucleation, growth, and transport alongside the gas stream. However, the NP formation and transport involve complex non‐equilibrium processes, which are still the subject of investigation. The development of in situ investigation techniques such as UV–Vis spectroscopy and small angle X‐ray scattering enabled further insights into the dynamic processes inside the GAS and have recently revealed NP trapping at different distances from the magnetron source. The main drawback of these techniques is their limited spatial resolution. To understand the spatio‐temporal behavior of NP trapping, an in situ laser light scattering technique is applied in this study. By this approach, silver NPs are made visible inside the GAS with good spatial and temporal resolution. It is found that the argon gas pressure, as well as different gas inlet configurations, have a strong impact on the trapping behavior of NPs inside the GAS. The different gas inlet configurations not only affect the trapping of NPs, but also the size distribution and deposition rate of NPs.


  • Template-Induced Growth of Sputter-Deposited Gold Nanoparticles on Ordered Porous TiO2 Thin Films for Surface-Enhanced Raman Scattering Sensors

    by Suzhe Liang, Tianfu Guan, Shanshan Yin, Eva Krois, Wei Chen, Christopher R. Everett, Jonas Drewes, Thomas Strunskus, Marc Gensch, Jan Rubeck, et al.