Wenwen Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenwen Han has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Hongbo Chen
College of Electromechanical Engineering, Qingdao University of Science & Technology, Qingdao, China
7 shared publications Bowen Yang
College of Intelligent Manufacturing, Qingdao University of Science & Technology
3 shared publicationsChunming Wang
College of Intelligent Manufacturing, Qingdao University of Science & Technology
3 shared publications- Fengfu Yin
School of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao, China
3 shared publications - Yiren Pan
College of Electromechanical Engineering Qingdao University of Science and Technology Qingdao China
3 shared publications - Chuansheng Wang
College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China
2 shared publications
Latest Publications
- 18 August 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (11) , 3403-3429
Progress and technical challenges in electrospinning technology for continuous nanofiber yarn preparation
1. Electrospinning has emerged as a key technique for producing continuous nanofiber yarns (nanoyarns). These materials exhibit high surface-area-to-volume ratios and tunable mechanical properties,...
- 18 August 2026
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 117 (11) , 3403-3429
Progress and technical challenges in electrospinning technology for continuous nanofiber yarn preparation
1. Electrospinning has emerged as a key technique for producing continuous nanofiber yarns (nanoyarns). These materials exhibit high surface-area-to-volume ratios and tunable mechanical properties,...
- 9 July 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (9) , 3843-3853
Fabrication of Microfiber Bundles via Melt Electrospinning Technique
- 9 July 2025
- Published by Springer Nature in Fibers and Polymers
- Vol. 26 (9) , 3843-3853
Fabrication of Microfiber Bundles via Melt Electrospinning Technique
- 4 March 2025
- Published by Springer Nature in Fibers and Polymers
- p. 1-10
Study on the Melt Electrospinning Method with Internal Electrode and Fiber Refinement
- 4 March 2025
- Published by Springer Nature in Fibers and Polymers
- p. 1-10
Study on the Melt Electrospinning Method with Internal Electrode and Fiber Refinement
- Open Access
A Study on the Pyrolysis and Product Regulation Mechanism of Waste Polystyrene at Threshold Temperatures
Pyrolysis technology, as a method for recycling waste polystyrenes (WPs), is widely regarded as an effective means to achieve the high value reutilization of WPs due to its environmental friendliness and the renewability of the resources used. However, in the conventional pyrolysis process for WPs, relatively high temperatures are often required to induce pyrolysis. This process not only consumes a significant amount of energy but also leads to complex and variable product compositions due to the high pyrolysis temperatures. Therefore, there is an urgent need to develop a high-value-added pyrolysis process that can lower the pyrolysis temperature of WPs and regulate its products, achieving the efficient conversion of WPs. This paper proposes a high-value “threshold temperature pyrolysis process” based on the relationships between pyrolysis temperature, threshold activation energy, and the conversion rate of WPs. The study found that under a heating rate of 10 K/min, when the conversion rate of WPs reaches 0.3, the maximum activation energy required for the entire pyrolysis process is approximately 223 kJ/mol, corresponding to a pyrolysis temperature of 673.15 K. Therefore, conducting isothermal pyrolysis at this temperature is expected to achieve the efficient conversion of WPs. The experimental results show that, compared to the conventional pyrolysis of WPs, the threshold temperature of the pyrolysis process not only lowers the pyrolysis temperature by 40 K but also regulates the distribution of pyrolysis products and the composition of pyrolysis oil, leading to a 7%wt increase in the yield of the pyrolysis oil, reaching 89.3%wt. Meanwhile, the relative content of low-molecular-weight aromatic hydrocarbons (Toluene, Styrene, and α-Methylstyrene) in the pyrolysis oil increases by 7.4%wt, which also suggests that the threshold temperature of the pyrolysis process promotes the shift in pyrolysis oil towards lighter fractions. These findings provide a solution for energy saving, emissions reductions, and the efficient conversion of WPs.
Open AccessA Study on the Pyrolysis and Product Regulation Mechanism of Waste Polystyrene at Threshold Temperatures
Pyrolysis technology, as a method for recycling waste polystyrenes (WPs), is widely regarded as an effective means to achieve the high value reutilization of WPs due to its environmental friendliness and the renewability of the resources used. However, in the conventional pyrolysis process for WPs, relatively high temperatures are often required to induce pyrolysis. This process not only consumes a significant amount of energy but also leads to complex and variable product compositions due to the high pyrolysis temperatures. Therefore, there is an urgent need to develop a high-value-added pyrolysis process that can lower the pyrolysis temperature of WPs and regulate its products, achieving the efficient conversion of WPs. This paper proposes a high-value “threshold temperature pyrolysis process” based on the relationships between pyrolysis temperature, threshold activation energy, and the conversion rate of WPs. The study found that under a heating rate of 10 K/min, when the conversion rate of WPs reaches 0.3, the maximum activation energy required for the entire pyrolysis process is approximately 223 kJ/mol, corresponding to a pyrolysis temperature of 673.15 K. Therefore, conducting isothermal pyrolysis at this temperature is expected to achieve the efficient conversion of WPs. The experimental results show that, compared to the conventional pyrolysis of WPs, the threshold temperature of the pyrolysis process not only lowers the pyrolysis temperature by 40 K but also regulates the distribution of pyrolysis products and the composition of pyrolysis oil, leading to a 7%wt increase in the yield of the pyrolysis oil, reaching 89.3%wt. Meanwhile, the relative content of low-molecular-weight aromatic hydrocarbons (Toluene, Styrene, and α-Methylstyrene) in the pyrolysis oil increases by 7.4%wt, which also suggests that the threshold temperature of the pyrolysis process promotes the shift in pyrolysis oil towards lighter fractions. These findings provide a solution for energy saving, emissions reductions, and the efficient conversion of WPs.
- Open Access
Synergistic Effects Between Mixed Plastics and Their Impact on Pyrolysis Behavior and Pyrolysis Products
Pyrolysis is recognized as a promising technology for waste plastics management. Although there have been many studies on pyrolysis of waste plastics, there is still a lack of in-depth research on the mechanism of synergistic effect between mixed plastics and the mechanism of product formation. In this paper, based on the pyrolysis characteristics of Polystyrene, Polyethylene, and mixed plastics (Polystyrene/Polyethylene), it is demonstrated that a synergistic effect exists in the co-pyrolysis of Polystyrene/Polyethylene and affects the pyrolysis behavior and pyrolysis products. It was found that polystyrene chain segments containing C=C double bonds, generated from the pyrolysis of polystyrene, initiated the pyrolysis of polyethylene during the polystyrene/polyethylene co-pyrolysis, resulting in the termination pyrolysis temperature of the co-pyrolysis being advanced by 19.8 K. Due to the reduction in the termination pyrolysis temperature by 19.8 K, the average activation energy of the co-pyrolysis was reduced by about 14%. Compared with the weighted values of single-component plastics (Polystyrene and Polyethylene), the actual oil production of co-pyrolysis increased by 9.7% to 89.80%. At the same time, the content of low molecular weight Styrene and Toluene in pyrolysis oil increased by 12.3% and 1.65%, respectively. This study provides a useful and comprehensive reference for realizing the closed cycle of “from plastics to plastics”.
Open AccessSynergistic Effects Between Mixed Plastics and Their Impact on Pyrolysis Behavior and Pyrolysis Products
Pyrolysis is recognized as a promising technology for waste plastics management. Although there have been many studies on pyrolysis of waste plastics, there is still a lack of in-depth research on the mechanism of synergistic effect between mixed plastics and the mechanism of product formation. In this paper, based on the pyrolysis characteristics of Polystyrene, Polyethylene, and mixed plastics (Polystyrene/Polyethylene), it is demonstrated that a synergistic effect exists in the co-pyrolysis of Polystyrene/Polyethylene and affects the pyrolysis behavior and pyrolysis products. It was found that polystyrene chain segments containing C=C double bonds, generated from the pyrolysis of polystyrene, initiated the pyrolysis of polyethylene during the polystyrene/polyethylene co-pyrolysis, resulting in the termination pyrolysis temperature of the co-pyrolysis being advanced by 19.8 K. Due to the reduction in the termination pyrolysis temperature by 19.8 K, the average activation energy of the co-pyrolysis was reduced by about 14%. Compared with the weighted values of single-component plastics (Polystyrene and Polyethylene), the actual oil production of co-pyrolysis increased by 9.7% to 89.80%. At the same time, the content of low molecular weight Styrene and Toluene in pyrolysis oil increased by 12.3% and 1.65%, respectively. This study provides a useful and comprehensive reference for realizing the closed cycle of “from plastics to plastics”.
- Top Cited PapersOpen Access
Pyrolysis of Waste Tires: A Review
Waste tires are known as “black pollution”, which is difficult to degrade. The safe handling and recycling of waste tires have always been the focus of and difficulty for the global rubber industry. Pyrolysis can not only solve the problem of environmental pollution but also completely treat the waste tires and recover valuable pyrolysis products. This paper summarizes research progress on the pyrolysis of waste tires, including the pyrolysis mechanism; the important factors affecting the pyrolysis of waste tires (pyrolysis temperature and catalysts); and the composition, properties, and applications of the three kinds of pyrolysis products. The composition and yield of pyrolysis products can be regulated by pyrolysis temperature and catalysts, and pyrolysis products can be well used in many industrial occasions after different forms of post-treatment.
Top Cited PapersOpen AccessPyrolysis of Waste Tires: A Review
Waste tires are known as “black pollution”, which is difficult to degrade. The safe handling and recycling of waste tires have always been the focus of and difficulty for the global rubber industry. Pyrolysis can not only solve the problem of environmental pollution but also completely treat the waste tires and recover valuable pyrolysis products. This paper summarizes research progress on the pyrolysis of waste tires, including the pyrolysis mechanism; the important factors affecting the pyrolysis of waste tires (pyrolysis temperature and catalysts); and the composition, properties, and applications of the three kinds of pyrolysis products. The composition and yield of pyrolysis products can be regulated by pyrolysis temperature and catalysts, and pyrolysis products can be well used in many industrial occasions after different forms of post-treatment.
- Open Access
Study of Carbon Matrix Composite as Wear-Resistant Plate Material on Improving Wear Resistance and Mixing Effect in Mixing Process
Silica and carbon black are the most important reinforcing systems in rubber formula. In the process of continuous optimization of the formula, silica gradually replaces carbon black by its characteristics. In view of the wear problem of the components of the mixer chamber caused by the increase in the proportion of silica in the formula, this research applied carbon matrix composite (CMC) materials to wear-resistant plate materials, and compared them with common wear-resistant (CWR) plate materials to explore the impact of replacing CWR plate with CMC on improving wear resistance and mixing effect. The results showed that compared with the CWR plate, CMC wear-resistant plate showed characteristics of a high friction coefficient and low wear rate (reduced by about 23%) in the mixing process of silica compound. However, the friction behavior of carbon black compound and carbon matrix composite wear-resistant plate showed an opposite trend, where the friction coefficient and wear rate increased simultaneously, especially the wear rate that increased by about 35%. The main reasons for the experimental results were related to the characteristics, elemental composition and surface morphology of carbon matrix composite, silica and carbon black. The experimental results also indicated that the carbon matrix composite wear-resistant plate is more suitable for a silica mixing process, and the increasing friction coefficient with decreasing wear rate of wear-resistant plate can further improve the importance of effective friction in mixing and prolonging the service life of wear-resistant plate.
Open AccessStudy of Carbon Matrix Composite as Wear-Resistant Plate Material on Improving Wear Resistance and Mixing Effect in Mixing Process
Silica and carbon black are the most important reinforcing systems in rubber formula. In the process of continuous optimization of the formula, silica gradually replaces carbon black by its characteristics. In view of the wear problem of the components of the mixer chamber caused by the increase in the proportion of silica in the formula, this research applied carbon matrix composite (CMC) materials to wear-resistant plate materials, and compared them with common wear-resistant (CWR) plate materials to explore the impact of replacing CWR plate with CMC on improving wear resistance and mixing effect. The results showed that compared with the CWR plate, CMC wear-resistant plate showed characteristics of a high friction coefficient and low wear rate (reduced by about 23%) in the mixing process of silica compound. However, the friction behavior of carbon black compound and carbon matrix composite wear-resistant plate showed an opposite trend, where the friction coefficient and wear rate increased simultaneously, especially the wear rate that increased by about 35%. The main reasons for the experimental results were related to the characteristics, elemental composition and surface morphology of carbon matrix composite, silica and carbon black. The experimental results also indicated that the carbon matrix composite wear-resistant plate is more suitable for a silica mixing process, and the increasing friction coefficient with decreasing wear rate of wear-resistant plate can further improve the importance of effective friction in mixing and prolonging the service life of wear-resistant plate.
- Open Access
Effect of Interfacial Lubrication between Rubber and Metal on Reducing Mixer Chamber Wall Wear in Mixing Process
This paper focused on adding a suitable lubrication effect at the interface between the rubber and mixer chamber wall on reducing the surface wear rate of the mixer chamber wall. In the research process, the contact model between the compound and internal mixer chamber wall was simplified to the pin-on-disc experimental model. The experimental results showed that the friction coefficient and the metal surface wear rate of the mixer chamber were reduced (by approximately 24%) by adding an appropriate amount of antifriction agent in the mixing process, while the comprehensive properties of the compound showed an improvement trend. By analyzing the surface elements of the rubber compound, the MoS2 with an anti-wear effect on the surface of the rubber compound can form a lubrication mechanism between the rubber, filler, and mixer chamber wall metal. Combined with the result of the comprehensive properties of rubber, which showed that although the appropriate amount of antifriction agent formed a lubrication protection mechanism between the rubber and the inner mixing chamber wall, the mechanism did not affect the friction behavior required for mixing. The study can effectively enhance the effective friction mixing and reduce the wear and power consumption of the mixing chamber caused by excess friction during the mixing process.
Open AccessEffect of Interfacial Lubrication between Rubber and Metal on Reducing Mixer Chamber Wall Wear in Mixing Process
This paper focused on adding a suitable lubrication effect at the interface between the rubber and mixer chamber wall on reducing the surface wear rate of the mixer chamber wall. In the research process, the contact model between the compound and internal mixer chamber wall was simplified to the pin-on-disc experimental model. The experimental results showed that the friction coefficient and the metal surface wear rate of the mixer chamber were reduced (by approximately 24%) by adding an appropriate amount of antifriction agent in the mixing process, while the comprehensive properties of the compound showed an improvement trend. By analyzing the surface elements of the rubber compound, the MoS2 with an anti-wear effect on the surface of the rubber compound can form a lubrication mechanism between the rubber, filler, and mixer chamber wall metal. Combined with the result of the comprehensive properties of rubber, which showed that although the appropriate amount of antifriction agent formed a lubrication protection mechanism between the rubber and the inner mixing chamber wall, the mechanism did not affect the friction behavior required for mixing. The study can effectively enhance the effective friction mixing and reduce the wear and power consumption of the mixing chamber caused by excess friction during the mixing process.
- Open Access
Effect of the Addition of Different Amounts of Aramid Fibers on Metal Friction and Wear during Mixing
Studies show that the long-term operation of a rubber mixer results in wear at the end face of the mixer. End face wear increases the gap between the mixing chamber and the end face, resulting in leakage and a reduction in the mixing performance, affecting the final product’s quality. Therefore, it is essential to investigate the wear of the metal face during the mixing process. The present study added aramid fibers to a rubber compound using a mechanical blender to obtain a composite material. Then, the influence of the aramid fibers on the metal friction and wear of the end face of the mixer was analyzed. This article introduces the concept of the wear ratio and explores the friction and wear of metals from the perspective of formulation technology for the first time. With the addition of aramid fibers, the proportion of abrasive wear of rubber on metal decreased, and the proportion of corrosive wear increased during the mixing process; however, when the addition of aramid fibers exceeded 3 phr, the balance of abrasive wear of rubber on metal increased and the proportion of corrosive wear decreased. It was found that aramid fibers have the property of friction reduction, which reduces the wear of the rubber blend on the metal. When the amount of aramid fibers added was 3 phr, the amount of abrasion of the rubber compound on the metal was the lowest.
Open AccessEffect of the Addition of Different Amounts of Aramid Fibers on Metal Friction and Wear during Mixing
Studies show that the long-term operation of a rubber mixer results in wear at the end face of the mixer. End face wear increases the gap between the mixing chamber and the end face, resulting in leakage and a reduction in the mixing performance, affecting the final product’s quality. Therefore, it is essential to investigate the wear of the metal face during the mixing process. The present study added aramid fibers to a rubber compound using a mechanical blender to obtain a composite material. Then, the influence of the aramid fibers on the metal friction and wear of the end face of the mixer was analyzed. This article introduces the concept of the wear ratio and explores the friction and wear of metals from the perspective of formulation technology for the first time. With the addition of aramid fibers, the proportion of abrasive wear of rubber on metal decreased, and the proportion of corrosive wear increased during the mixing process; however, when the addition of aramid fibers exceeded 3 phr, the balance of abrasive wear of rubber on metal increased and the proportion of corrosive wear decreased. It was found that aramid fibers have the property of friction reduction, which reduces the wear of the rubber blend on the metal. When the amount of aramid fibers added was 3 phr, the amount of abrasion of the rubber compound on the metal was the lowest.
- 15 March 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 348
Enhancement of heat transfer during rubber pyrolysis process
- 15 March 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 348
Enhancement of heat transfer during rubber pyrolysis process